Search Results (385)

Diabetes is emerging as a significant health and societal concern globally, impacting both young and old populations. In individuals with diabetic foot ulcers (DFUs), the wound healing process is hindered due to abnormal glucose metabolism and chronic inflammation. Minor injuries, blisters, or pressure sores can develop into chronic ulcers, which, if left untreated, may lead to serious infections, tissue necrosis, and eventual amputation. Current management techniques include debridement, wound dressing, oxygen therapy, antibiotic therapy, topical application of antibiotics, and surgical skin grafting, which are used to manage diabetic wounds and foot ulcers. This review focuses on a hydrogel-based strategy for phase-wise targeting of DFUs, addressing sequential stages of diabetic wound healing: hemostasis, infection, inflammation, and proliferative/remodeling phases. Hydrogels have emerged as a promising wound care solution due to their unique properties in providing a suitable wound-healing microenvironment. We explore natural polymers, including hyaluronic acid, chitosan, cellulose derivatives, and synthetic polymers such as poly (ethylene glycol), poly (acrylic acid), poly (2-hydroxyethyl methacrylate, and poly (acrylamide), emphasizing their role in hydrogel fabrication to manage DFU through phase-dependent strategies. Recent innovations, including self-healing hydrogels, stimuli-responsive hydrogels, nanocomposite hydrogels, bioactive hydrogels, and 3D-printed hydrogels, demonstrate enhanced therapeutic potential, improving patient outcomes. This review further discusses the applicability of various hydrogels to each phase of wound healing in DFU treatment, highlighting their potential to advance diabetic wound care through targeted, phase-specific interventions. Full article

To develop membranes capable of efficient and switchable emulsion separation under variable pH conditions, pH-responsive surfaces were engineered on poly(ethylene terephthalate) track-etched membranes (PET TeMs) via a two-step UV-initiated RAFT graft polymerization process. Initially, polystyrene (PS) was grafted to render the surface hydrophobic, followed by the grafting of poly(methacrylic acid) (PMAA) to introduce pH-responsive carboxyl groups. Optimized conditions (117 mM MAA, RAFT:initiator 1:10, 60 min UV exposure at 10 cm) resulted in PET TeMs-g-PS-g-PMAA surfaces exhibiting tunable wettability, with contact angles shifting from 90° at pH 2 to 65° at pH 9. Successful grafting was confirmed by FTIR, AFM, SEM, TGA, and TB dye sorption. The membranes showed high degree of rejection (up to 98%) for both direct and reverse emulsions. In direct emulsions, stable flux values (70 ± 2.8 to 60 ± 2.9 L m⁻² h⁻¹ for cetane-in-water and 195 ± 8.2 to 120 ± 6.9 L m⁻² h⁻¹ for o-xylene-in-water) were maintained over five cycles at 900 mbar, indicating excellent antifouling performance. Reverse emulsions initially exhibited higher flux, but stronger fouling; however, flux recovery reached 91% after cleaning. These findings demonstrate the potential of PET TeMs-g-PS-g-PMAA as switchable, pH-responsive membranes for robust emulsion separation. Full article

We study the microstructural properties and state of hydration of aqueous low-molecular-weight poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA) solutions and their dependence on polymer concentration and pH by means of detailed atomistic Molecular Dynamics (MD) simulations and experiments. For infinitely dilute solutions with a degree of polymerization of N = 30 at basic pH conditions, no temperature dependence is observed on the overall shape and state of hydration of the polyelectrolyte. This is supported by the experimental component of our work according to which the hydrodynamic radius, R_h, does not change dramatically with temperature. Small, but not drastic, changes are observed for solutions with longer PDMAEMA chains (N = 50, 70, and 110). Although the MD simulations demonstrate that temperature and salt do affect the strength of hydrophobic interactions between PDMAEMA and water, apparently these effects are not strong enough to cause drastic changes to the overall shape of the polymer. MD simulations also reveal that Na⁺ salt ions strongly interact with the oxygen atoms located at the side chain of the polyelectrolyte. While no significant changes in the global shape or state of hydration of the PDMAEMA chain are found, a strong dependence is revealed for the aggregation behavior of the polymer on temperature and salt in slightly more concentrated solutions. A structural transition from a collapsed coil to a stretched conformation is also observed as we move from basic to acidic pH conditions, which is strongly correlated with the degree of chain rigidity as a function of pH. Full article

Biodegradable polymers offer environmental advantages compared to fossil-based alternatives, but they currently lack the stretchability required for demanding applications such as mesh fabrics for woven flexible intermediate bulk container (FIBC) bags and stretch, shrink, and cling films. The goal of this research is to enhance the stretchability of biodegradable blends based on 80% poly(butylene adipate-co-terephthalate) (PBAT) and 20% poly(lactic acid) (PLA) through reactive extrusion. Radical initiator (dicumyl peroxide (DCP)) and chain extenders (maleic anhydride (MA), glycidyl methacrylate (GMA)) were employed to improve the melt strength and elasticity of the extruded films. The reactive blends were initially prepared using a batch mixer and subsequently compounded in a twin-screw extruder. Films were produced via cast extrusion. 0.1% wt. DCP led to a 200% increase in elongation at break and a 44% improvement in tensile strength. Differential scanning calorimetry and scanning electron microscopy revealed enhanced miscibility between components. Shear and complex viscosity increased by 38% and 85%, compared to the neat blend, respectively. Reactive extrusion led to a better dispersion and distribution of the phases. An improved interfacial adhesion between the phases, in addition to higher molecular weight, led to enhanced melt strength and improved stretchability. Full article

Polycationic gene vectors have been studied extensively for gene delivery, and the charge density of polycations plays a pivotal role in condensing nucleic acids. Recently, we have synthesized two kinds of polycations with varied charge densities: poly(2-(dimethylamino)ethyl methacrylate) (denoted as A100) and a copolymer of 2-(tetramethyleneimino)ethyl methacrylate and 2-(diisopropyl-amino)ethyl methacrylate with a 3:1 feed ratio (denoted as B75D25). Despite its lower charge density, B75D25-based vectors exhibit higher transfection efficiency than A100-based vectors, prompting the hypothesis that hydrophobic interactions, rather than solely high charge density, enhance DNA complexation and gene delivery. This study aims to investigate the molecular mechanisms underlying these differences using molecular dynamics (MD) simulations to study the complexation of DNA with B75D25s and A100s. Our simulations reveal that DNA is quite uniformly covered by B75D25s, and the complexation is not only driven by the electrostatic attraction with DNA but more importantly by the hydrophobic interactions among B75D25s. In contrast, only a small fraction of A100s bind to DNA, which is due to the strong electrostatic repulsion among A100s. Our results reveal the contribution of hydrophobic interactions to the complexation of low-charge-density B75D25s with DNA. These results suggest that high charge density may not be essential for DNA condensation and efficient gene delivery. Full article

This paper presents a comparative study examining the effects of carbon nanotubes (CNTs) and expanded graphite (EG) on the thermal, mechanical, morphological, electrical, and piezoresistive properties of poly(ethylene-co-methacrylic acid) (EMAA) nanocomposites. To this end, different amounts of carbonaceous fillers (EG and CNTs separately) were added to the EMAA thermoplastic matrix, and the relative electrical percolation thresholds (EPTs) were determined. The effect of filler concentration on thermo-oxidative degradation and the EMAA crystallinity was investigated via thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC), respectively. Dynamic mechanical analysis (DMA) demonstrated that both fillers enhance the Young’s and storage moduli, as well as the glass transition temperature, with a greater improvement for the bidimensional nanofiller, most likely due to the cumulative effect of more extensive EG-matrix interactions. In tensile tests, a very relevant difference was detected in the Gauge Factor (G.F.) and the elongation at break of the two typologies of nanocomposites. The G.F. of EMAA 10% CNT and EMAA 15% EG were found to be 0.5 ± 0.08 and 165 ± 14, respectively, while elongation at break was about 68% for EMAA 10% CNT and 8% for EMAA 15% EG. Emission Scanning Electron Microscopy (FESEM) and Tunneling Atomic Force Microscopy (TUNA) have contributed to explaining the differences between EG- and CNT-based nanocomposites from a morphological point of view, underlying the pivotal role of the filler aspect ratio and its structural features in determining different mechanical and piezoresistive performance. The comprehensive analysis of EMAA-EG and EMAA-CNT nanocomposites provides a guide for selecting the best self-sensing system for the specific application. More specifically, EMAA-CNT nanocomposites with high elongation at break and lower sensitivity to small strains are suitable for movement sensors in the soft robotic field, where high deformation has to be detected. On the other hand, the high sensitivity at a low strain of EMAA-EG systems makes them suitable for integrated sensors in more rigid composite structures, such as aeronautical and automotive components or wind turbines. Full article

The removal of per- and polyfluoroalkyl substances (PFAS) from global aquatic environments is an emerging issue. However, little attention has been paid to addressing accumulated PFAS through their removal. This study demonstrates the encapsulation of perfluoroalkyl carboxylic acids (PFCAs) within polymer microspheres that dissolve in supercritical carbon dioxide (scCO₂). PFCAs were effectively captured by a hindered amine-supported monomer, 2,2,6,6-tetramethyl-4-piperidyl methacrylate (TPMA), in methanol (MeOH) through a simple acid-base reaction. The PFCA-loaded TPMA underwent dispersion polymerization in MeOH in the presence of poly(N-vinylpyrrolidone) (PVP) as a surfactant, producing microspheres with high monomer conversions. The microsphere size depended on the molecular weight and concentration of PVP, as well as the perfluoroalkyl chain length of the PFCAs. X-ray photoelectron spectroscopy (XPS) revealed that the perfluoroalkyl chains migrated from the interior to the surface of the microspheres when exposed to air. These surface perfluoroalkyl chains facilitated dissolution of the microspheres in scCO₂, with cloud points observed under relatively mild conditions. These findings suggest the potential for managing PFCA-encapsulated microspheres in the scCO₂ phase deep underground via CO₂ sequestration. Full article

Poly(lactic acid) (PLA) holds significant promise as an option in the field of packaging materials due to its biodegradability and antibacterial properties. Therefore, it is vital for developing packaging materials while improving their heat resistance, and transparency is essential for guaranteeing its application. Using a self-assembled nucleating agent with hydrogen bonding and thermodynamically compatible transparent polymethyl methacrylate (PMMA), this study fabricated PLA micro-crystals with an interface blurred grain. Furthermore, the crystalline structure-property relationship was investigated in different isothermal crystallization conditions; it was possible to achieve higher crystallinity while maintaining the transparency of PLA/10 wt% PMMA/0.3 wt% nucleating agent blends. Compared to other temperatures, the crystallization rate of PLA blends under annealing conditions at 90 °C was higher when induced by three different nucleating agents. Particularly, in the presence of the TC-328 nucleating agent, the system exhibited a crystallinity of 32%, the smallest grain size, and an increased Tg of 61.3 °C, as well as an elevated heat deformation temperature (HDT) from 54.13 °C to 63.2 °C. The smaller nucleating agents with high surface energy enhanced the interaction between the PLA and PMMA, enhancing the PLA/PMMA tensile strength and HDT. These findings may pave the way for designing novel blends for packaging or heat-resistant devices. Full article

Thread-based analytical devices are low-cost, portable, and easy to use, making them ideal for detecting various biomolecules like glucose and DNA with minimal sample requirements, while also offering environmental benefits through their biodegradability. This study explores the potential of zwitterionic poly(sulfobetaine methacrylate) brushes modified cotton thread (PSBMA@threads) as an innovative substitute for DNA solid-phase extraction. The PSBMA polymer brushes were synthesized on cotton threads via surface-initiated atom transfer radical polymerization (SI-ATRP). The usability of the PSBMA@threads for DNA extraction from cell lysates containing cell debris, proteins, and detergents was evaluated. Characterization using SEM, FTIR, and EDS confirmed the successful functionalization with PSBMA polymer brushes. The antifouling properties of PSBMA@threads, including resistance to non-specific protein adsorption and underwater oil repellency, were assessed. The results demonstrated selective DNA capture from protein and lipid-rich lysates. Optimized extraction parameters improved DNA yield, enabling efficient extraction from tumor cells, which successfully underwent PCR amplification. Comparative experiments with commercial silica membrane-based columns revealed that PSBMA@threads exhibited comparable DNA extraction capability. The PSBMA@threads maintained extraction capability after six months of ambient storage, highlighting its stability and cost-effectiveness for nucleic acid isolation in analytical applications. Full article

In this study, we explore the design of novel random poly(lauryl methacrylate-co-tert-butyl methacrylate-co-methacrylic acid), P(LMA-co-tBMA-co-MAA) copolymers via the RAFT copolymerization of LMA and tBMA followed by the selective hydrolysis of tBMA segments. For the molecular characterization of the novel copolymer, a series of physicochemical techniques were implemented, including size exclusion chromatography (SEC), proton nuclear magnetic resonance (¹H-NMR) and attenuated total reflectance–Fourier transform infrared (ATR–FTIR) spectroscopy. Our experimental results confirmed the successful synthesis of the targeted copolymers. The compositions were in accordance with the targeted differing fraction of hydrophobic tBMA/LMA elements, and hydrolysis resulted in at least 64% conversion to hydrophilic MAA units. The copolymers, bearing both an amphiphilic character and polyelectrolyte properties while being composed of randomly distributed monomeric segments of biocompatible materials, were subsequently investigated in terms of their self-assembly behavior in aqueous solutions. Dynamic light scattering and fluorescence spectroscopy experiments demonstrated the formation of self-assembled nanoaggregates (average hydrodynamic radii, R_h < 100 nm) that formed spontaneously, having low critical aggregation concentration (CAC) values (below 3.5 × 10⁻⁶ g/mL), and highlighted the feasibility of using these copolymer systems as nanocarriers for biomedical applications. Full article

Superabsorbent core/shell composite materials are a type of advanced materials presenting enhanced water absorption and retention capabilities. The central core material can swell and absorb water covered by a shell that serves a specific function. The composition and functionality of each layer can be tailored to improve the material’s performance. The core is typically fabricated from superabsorbent polymers such as sodium polyacrylate, poly(acrylic acid) or other hydrophilic materials. The shell can be either inorganic polymers or organic polymers such as poly(methyl methacrylate), biodegradable polymers, polysaccharides or other functionalized materials in order to enhance biodegradability, mechanical strength or responsiveness to stimuli (e.g., temperature, pH). These materials present enormous potential to address issues for versatile applications in various fields, including biomedical applications, hygiene products and agriculture, due to their tailored structure. The common synthesis techniques for these advanced materials are emulsion polymerization, in situ polymerization, suspension polymerization with respect to the core material, layer-by-layer assembly and the sol–gel technique with respect to the shell formation. The techniques that are usually utilized for the characterization of the aforementioned materials and the validation of their functionalities are based on thermal analysis, morphology studies and swelling behavior and water retention and release mechanical properties, respectively. This review offers an in-depth examination of recent advancements in synthesis methods, structural engineering approaches and emerging applications of superabsorbent core/shell composites, highlighting the critical importance of material design in boosting their performance and broadening their practical use. Finally, special attention is devoted to the future perspectives of superabsorbent core/shell composites, exploring potential innovations in material design and multifunctionality. Emerging trends such as stimuli-responsive behavior, sustainability and scalability are discussed as key factors for next-generation applications. The review also outlines challenges and opportunities that could guide future research and industrial implementation. Full article

The lack of personalized wound dressings tailored to individual needs can significantly hinder wound healing. Hydrogels offer a promising solution, as they can be engineered to mimic the extracellular matrix (ECM), providing an optimal environment for wound repair. The integration of digital light processing (DLP), a high-resolution 3D printing process, allows precise customization of hydrogel-based wound dressings. In this study, gelatin methacrylate (GelMA)-based formulations were prepared in combination with three different polymeric precursors: methacrylated hyaluronic acid (HAMA), poly (ethylene glycol) diacrylate (PEGDA) and allyl cellulose (MCCA). These precursors were used to print high-resolution micropatterned patches. The printed constructs revealed a high gel content and a good resistance to hydrolytic degradation. To improve the adhesive and antioxidant properties of the printed patches, gallic acid (GA) was incorporated through surface functionalization. This enabled the scavenging of approximately 80% of free radicals within just 4 h. The adhesive properties of the printed wound dressings were also significantly improved, with further enhancement observed upon the addition of Fe³⁺ ions. In vitro cytocompatibility tests using a fibroblast (NHDF) cell line confirmed the suitability of the materials for biomedical applications. Thus, this study demonstrates the potential of DLP-printed hydrogels as advanced personalized wound dressing materials. Full article

N-isopropylacrylamide and methacrylic acid were copolymerized by a free radical polymerized mechanism. The obtained hydrogel poly(N-isopropylacrylamide-co-methacrylic acid) hydrogels, poly(NIPAM-co-MAA), were utilized as sorbent material for removal Cr(VI), Mn(II), and Pb(II) ions from simulated aqueous solutions. Hydrogel structures before and after heavy metal sorption are characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. The swelling results indicate that poly(NIPAM-co-MAA) hydrogels are pH- and temperature-sensitive and have high swelling reversibility through three swelling/contraction cycles. The studied parameters of heavy metal sorption include the effect of pH, the initial concentration of heavy metal, the effect of temperature, and the desorption of metal ions. The maximum sorption capacities of poly(NIPAM-co-MAA) hydrogels were determined at pH 4.5 and 25 °C, and they are, for Cr(VI), Mn(II), and Pb(II) ions, 289.35 mg/g, 190.59 mg/g, and 349.71 mg/g, respectively. The pseudo-second-order model and the Langmuir adsorption isotherm best describe the sorption of heavy metal ions onto hydrogels. The removal of heavy metals is an exothermic reaction, and the interaction mechanism between the metal and the hydrogel is primarily physical in nature. Results of three sorption/desorption cycles show a good desorption ratio and sorption capacity of poly(NIPAM-co-MAA) hydrogels. Full article

This study presents a hybrid hydrogel system designed for the targeted delivery of letrozole, a key therapeutic agent in breast cancer treatment. Letrozole-loaded poly(lactic-co-glycolic acid) (PLGA) microparticles were embedded within a poly(2-hydroxyethyl methacrylate) (pHEMA) matrix coated onto acrylamide-grafted low-density polyethylene (AAm-g-LDPE), yielding a mechanically stable system with tunable drug release. Field emission scanning electron microscopy (FE-SEM) and confocal microscopy confirmed uniform microparticle distribution. In vitro release studies in simulated uterine fluid (SUF) at 37 °C demonstrated a sustained release profile over 32 days, with a reduced initial burst effect (~15% lower than conventional PLGA systems). The system’s release kinetics followed the Higuchi model (R² = 0.803–0.996), indicating Fickian diffusion. This hybrid hydrogel offers enhanced drug stability, reduced dosing frequency, and potential for personalized hormone therapy, improving patient compliance, particularly for individuals with physical or cognitive impairments. Full article

Hydrogels with tunable properties are of great interest for the development of advanced drug delivery systems. In this study, novel hydrogels with an interpenetrating polymer network (IPN) structure were obtained from the pH-responsive poly(methacrylic acid) (PMAA) and the neutral poly(N,N-dimethylacrylamide) (PDMAM). The newly synthesized IPN hydrogels were shown to be pH responsive with a 1.5 to 2.5 fold increase in their equilibrium swelling ratio at a pH above 5 which makes them appropriate for targeted intestine drug delivery. Moreover, their pH responsiveness was found to be strongly influenced by the IPN’s composition. The IPN hydrogels were loaded with PMH via swelling and the drug entrapment efficiency was found to depend on their swelling characteristic varying with the IPN’s composition from 20% to 60%. The drug release profiles were investigated under conditions resembling the oral route of drug application. The PMH release profiles appeared to follow Fickian diffusion at a stomach-like pH = 1.2 and sub-diffusion mechanism at an intestine-like pH = 6.8. The results from this study reveal that IPN hydrogels of PMAA and PDMAM are promising candidates for oral delivery of promethazine hydrochloridee demonstrating pH responsiveness and controllable swelling dependent on their composition. Further investigations are planned to fully reveal their potential as smart drug delivery systems. Full article