Search Results (899)

Objectives: We examined whether sensory inhibition was altered in patients with autism spectrum disorder (ASD) and attention deficit hyperactivity disorder (ADHD) as deficits in the neural inhibition are considered to be involved in both disorders. Methods: By using auditory change-related brain potentials as the test response, paired pulse suppression (PPS) and prepulse inhibition (PPI) were compared among healthy controls (n = 57), patients with ASD (n = 22), and ADHD (n = 8). The test change-related response was elicited by an abrupt sound pressure increase in a continuous sound. In the PPS experiment, two 15 dB change stimuli were given 600 ms apart to elicit two change-related responses. In the PPI experiment, the test stimulus of a 10 dB increase and prepulse of a 2 dB increase were given with an interval of 50 ms. Evoked potentials were recorded from Cz referenced to the linked mastoids. Results: PPS differed significantly among the three groups, with a significantly lower value for ADHD than controls. PPI was significantly lower for ASD and ADHD than normal controls. Conclusions: Since these two measures are thought to represent changes in circuit excitability due to preceding stimuli via GABAergic transmission, the present results support the idea that dysfunction of the GABAergic system contributes to the etiology of these disorders. The present results showed that the pattern of dysfunction differed between the two disorders and suggest that measurements of inhibitory function may be able to differentiate between the two disorders. Full article

Although laser cavitation was discovered half a century ago, novel geometries and regimes to excite this effect have been vigorously explored during the past few decades. This research is driven by a variety of applications of laser cavitation in demanding branches of science and technology, such as microfabrication, synthesis of nanoparticles, manipulation of cells, surgery, and lithotripsy. In this work, we combine experimental studies using high-repetition-rate imaging and numerical simulations to uncover a novel regime of the laser cavitation observed upon excitation of a liquid by a train of laser pulses with the pulse energy of 140 mJ and duration of 1.2 μs delivered through a quartz optical fiber. Once the lifetime of the initial cavitation bubble (excited by the first laser pulse) is larger than the period between pulses, which is 34.3 μs, the secondary pulses in the train pass the gas in a bubble and evaporate additional liquid. This results in the formation of a cascaded cavitation bubble of larger volume and elongated shape of $4.6$ mm length compared to $3.8$ mm in case of excitation by a single laser pulse. In addition, the results of acoustic measurements confirm the presence of shock waves in the applied liquid. Finally, potential applications of the uncovered laser cavitation regime are discussed. Full article

This study investigates the effect of paint-related properties on the accuracy of delamination detection in lined oil paintings using pulsed phase thermography (PPT). Mock-ups of lined oil paintings were examined by PPT under both normal and angled illumination to induce apparently localized heating. Spectral characteristics in the excitation and detection wavelength ranges were analyzed and related to phase contrast variations in the resulting images. While paint-dependent energy absorption under localized heating may blur phase contrast and lead to misidentification of delamination, emissivity properties appear to contribute to stabilizing phase signals. These findings underscore the importance of accounting for paint properties in conservation diagnostics. Full article

The application of thermal barrier coatings (TBCs) for protecting mechanical components is widespread, particularly in high-temperature environments, such as gas turbines and aero-engines. Ensuring the integrity of these coatings throughout their service life is essential, as their degradation can lead to delamination, ultimately compromising the underlying component. It has been demonstrated that monitoring the thermal diffusivity value over time allows the monitoring of degradation of the coatings. Common thermographic techniques like pulsed and lock-in thermography have been used so far. However, to enhance both the signal-to-noise ratio (SNR) and the accuracy of thermal property measurements, new active thermography techniques have been developed. These methods rely on optimized excitation schemes combined with advanced signal processing strategies. In this work, we first introduce the pulse-compression thermography approach, which employs pseudo-noise modulated excitation to monitor and estimate the thermal diffusivity of the coating layers. Full article

The article presents a mathematical description of the thermal phenomena occurring both inside and on the surfaces of a homogeneous plate subjected to an external heat flux on one side. Analytical formulae for thermal excitation, with a given duration and constant power, are derived, enabling the determination of temperature increases on both the heated and unheated surfaces of the plate under specific heat transfer conditions to the surroundings. Convective heat transfer, with individual heat transfer coefficients on both sides of the slab, is considered; however, radiative heat loss can also be included. The solution of the problem obtained using two methods is presented: the method of separation of variables (MSV) and the Laplace transform (LT). The advantages and disadvantages of both analytical formulae, as well as the impact of various factors on the accuracy of the solution, are discussed. Among others, the MSV solution works well for a sufficiently long time, whereas the LT solution is better for a sufficiently short time. The theoretical considerations are illustrated with diagrams for several configurations, each representing various heat transfer conditions on both sides of the plate. The presented solution can serve as a starting point for further analysis of more complex geometries or multilayered structures, e.g., in non-destructive testing using active thermography. The developed theoretical model is verified for a determination of the thermal diffusivity of a reference material. The model can be useful for analyzing the method’s sensitivity to various factors occurring during the measurement process, or the method can be adapted to a pulse of known duration and constant power, which is much easier to implement technically than a very short impulse (Dirac) with high energy. Full article

Background: Transcutaneous spinal stimulation (TSS) is a noninvasive stimulation approach to modulate spinal reflex circuit excitability after spinal cord injury (SCI) Posterior root muscle (PRM) reflexes can be used to characterize the change in excitability of spinal reflex circuits after TSS; these responses are likely influenced by stimulus parameters. Methods: We compared PRM reflex responses to 3 TSS conditions: single-site continuous (SS-CONT), single-site burst (SS-BURST), and dual-site continuous (DS-CONT). Stimulation (frequency: 50 Hz, intensity: 80% soleus reflex threshold[RT]) was delivered for 30 min. The cathode was placed over the thoracic spine (T11–T12) and anodes placed paraumbilically; a second cathode over the lumbar spine (L1/2 or L2/3) was used for DS-CONT. PRM reflex responses in the soleus were elicited by paired 1 ms monophasic conditioning–test stimuli at a 50 ms interstimulus interval via the T11–12 cathode and paraumbilical anodes. Soleus PRM reflex indices included RT, response amplitude at 1.2xRT (RA_1.2xRT), slope, area under the input–output curve (AUC). Paired-pulse indices were collected, including paired-pulse depression (PPD) and depression of the area under the curve (AUC_dep). To assess the correlation between biomechanical and electrophysiologic measures of soleus spasticity, the ankle clonus drop test first drop excursion (FDE) was measured. All indices were measured at baseline and immediately post-intervention. Results: In whole-group analyses, PPD and AUC_dep were significantly decreased. Significant decreases in PPD and AUC_dep were identified only after the SS-CONT condition. No significant changes were identified in other PRM reflex indices after any of the 3 TSS conditions. No relationships between baseline FDE and any PRM reflex parameter were identified at baseline. Conclusions: With stimulation intensity of 80% soleus RT, modulation of targeted spinal reflex circuits was observed only in the SS-CONT condition when the response of the conditioning and test stimuli were considered. In addition, stretch-induced spasticity of the soleus may not be consistent with electrophysiologic testing. Full article

We determine the efficiency of generating singlet oxygen molecules through Raman excitation in distilled water. Focused nanosecond light pulses in the spectral blue region induce a Raman transition toward the singlet oxygen state, generating a Stokes signal in the red spectral region. The signal is proportional to the number of photons corresponding to the number of excited oxygen molecules. We calculate the efficiency by dividing the number of generated singlet oxygen molecules by the number of incoming pump photons, determining an efficiency of (8 ± 2) × 10⁻⁵ for water when pumping at 410 nm with a pulse energy of 13 mJ. We demonstrate that the Raman method results in no photobleaching, a phenomenon typically observed when photosensitizers are used. Thanks to this property, Raman excitation can continue for as long as the sample is irradiated, generating more singlet oxygen molecules over time than the photosensitization method. Full article

Elevated railways are a crucial component of railway lines, characterized by their widespread distribution, simple structure, and low cost, while actively promoting local economic development. However, they also cause significant ground vibrations when trains pass. Similarly, considerable vibration levels are transmitted to the subgrade and surrounding structures when trains operate on viaducts within the Loess Plateau region. However, research on mitigating these vibration effects remains relatively scarce. This study focused on the impacts of such vibrations on surrounding buildings and stratum structures and evaluated the effectiveness of a vibration isolation trench in mitigating these effects. Time frequency domain analysis of ground vibrations during train passage revealed that the characteristic frequency of the train-induced pulse excitation in the track structure had a pronounced peak in the spectrum curve. The introduction of a vibration isolation trench effectively blocked the propagation of vibration waves in the soil, reduced soil vibration, and significantly lowered the peak value in the spectrum. Numerical simulations were employed to analyze the elliptical polarization dispersion characteristics of surface wave propagation with the vibration isolation trench in place, confirming the effective damping performance of the trench. These findings could offer a valuable reference for high-speed railway vibration isolation and significantly advance the application of surface wave theory in high-speed railway technology. Full article

This study investigates the underwater transient vibro-acoustic response of double-layered stiffened cylindrical shells through an integrated experimental-numerical approach. Initially, vibration and noise responses under transient impact loads were experimentally characterized in an anechoic water tank, establishing benchmark datasets. Subsequently, based on the theory of transient structural dynamics, a numerical framework was developed by extending the time-domain finite element/boundary element (FEM/BEM) method, enabling comprehensive analysis of the transient vibration and acoustic radiation characteristics of submerged structures. Validation through experimental-simulation comparisons confirmed the method’s accuracy and effectiveness. Key findings reveal broadband features with distinct discrete spectral peaks in both structural vibration and acoustic pressure responses under transient excitation. Systematic parametric investigations demonstrate that: (1) Reducing the load pulse width significantly amplifies vibration acceleration and sound pressure levels, while shifting acoustic energy spectra toward higher frequencies; (2) Loading position alters both vibration patterns and noise radiation characteristics. The established numerical methodology provides theoretical support for transient impact noise prediction and low-noise structural optimization in underwater vehicle design. Full article

Rolling contact fatigue (RCF)-induced cracks in steel rails exhibit a fish-scale-shaped cluster distribution, and generally form in a layered, overlapping manner. Eddy-current-pulsed thermography (ECPT) has been applied in RCF detection by taking advantage of electromagnetic–thermal execution; however, one still faces challenges in identifying and quantifying such layered, overlapping defects. This paper proposes a swept-frequency eddy-current-pulsed thermal tomography (ECPTT) detection method to quantitatively characterize multilayer crack depth and inclination angle in an artificial rail sample. In particular, stimulating frequency modulation is used to guide the induced eddy current and heat to varying depths, and this is combined with principal component analysis (PCA) to identify multilayer defects. Moreover, a thermal signal reconstruction (TSR) algorithm is introduced. TSR features are extracted for analyzing the burial depth and inclination angle of multilayer defects. The results demonstrate that the third principal component (PC3), extracted via PCA, enables layer-count discrimination in multilayer defects. Integrated with gradient magnitude analysis of the second principal component (PC2) under swept-frequency excitation, defect contour localization error can be controlled within 0.5 mm. Building on layer discrimination, multi-frequency thermal response analysis further reveals variations in PC1’s variance contribution, differentiating inclination angles of 10° and 20°, whereas comparative heating- and cooling-rate magnitudes distinguish burial depths of 0.5 mm and 1.0 mm. The research verifies that the ECPTT system can accurately detect the layer number, inclination angle, and depth of buried RCF defects, substantially enhancing the accuracy of defect contour reconstruction. Full article

Vibration-based structural health monitoring methods have been widely applied in the field of damage identification. This paper proposes an intelligent diagnostic approach that integrates a multi-scale convolutional neural network with a multi-head attention mechanism (MSCNN-MHA) for the structural health monitoring of jacket-type offshore platforms. Through numerical simulations, acceleration response signals of three-pile and four-pile jacket platforms under random wave excitation are analyzed. Damage localization studies are conducted under simulated crack and pitting corrosion cases. Unlike previous studies that often idealize damage by weakening structural parameters or removing components, this study focuses on small-scale damage forms to better reflect real engineering conditions. To verify the noise resistance of the proposed method, noise is added to the original signals for further testing. Finally, experiments are conducted on the basic structure of the jacket-type offshore platform, simulating small-scale crack and pitting damage under sinusoidal and pulse excitation, to further evaluate the applicability of the method. Compared to previous CNN and MSCNN-based approaches, the results of this study demonstrate that the MSCNN-MHA method achieves higher accuracy in identifying and locating minor damage in jacket-type offshore platforms. Full article

This study investigates a non-destructive, compact pulse-echo ultrasonic method that combines an external transmitter with a single receiving sensor to identify different surface treatments applied to cementitious materials. The primary objective was to evaluate whether treatment-induced acoustic changes could be reliably quantified using time-domain signal parameters. Three types of surface conditions were examined: untreated reference specimens (R), specimens treated with a standard lithium silicate solution (A), and those treated with an enriched formulation containing hexylene glycol (B) intended to enhance pore sealing via gelation. A broadband piezoelectric receiver collected the backscattered echoes, from which the maximum amplitude, root mean square (RMS) voltage, signal energy, and effective duration were extracted. Receiver operating characteristic (ROC) analysis was conducted to quantify the discriminative power of each parameter. The results showed excellent classification performance between groups involving the B-treatment (AUC ≥ 0.96), whereas the R vs. A comparison yielded moderate separation (AUC ≈ 0.61). Optimal cut-off values were established using the Youden index, with sensitivity and specificity exceeding 96% in the best-performing scenarios. The results demonstrate that a single-receiver, one-sided pulse-echo arrangement coupled with straightforward amplitude metrics provides a rapid, cost-effective, and field-adaptable tool for the quality control of silicate-surface treatments. By translating laboratory ultrasonics into a practical on-site protocol, this study helps close the gap between the experimental characterisation and real-world implementation of surface-treatment verification. Full article

This paper presents a microcontroller-based technique for accurately measuring resistive sensors over a wide dynamic range using an adaptive constant current source. Unlike conventional voltage dividers or fixed-current methods—often limited by reduced resolution and saturation when sensor resistance varies across several decades—the proposed system dynamically adjusts the excitation current to maintain optimal Analog-to-Digital Converter (ADC) input conditions. The measurement circuit employs a fixed reference resistor and an inverting amplifier configuration, where the excitation current is generated by one or more pulse-width modulated (PWM) signals filtered through low-pass RC networks. A microcontroller selects the appropriate PWM channel to ensure that the output voltage remains within the ADC’s linear range. To support multiple sensors, an analog switch enables sequential measurements using the same dual-PWM current source. The full experimental implementation uses four op-amps to support modularity, buffering, and dual-range operation. Experimental results show accurate measurement of resistances from 1 kΩ to 100 kΩ, with maximum relative errors of 0.15% in the 1–10 kΩ range and 0.33% in the 10–100 kΩ range. The method provides a low-cost, scalable, and digitally controlled solution suitable for embedded resistive sensing applications without the need for high-resolution ADCs or programmable gain amplifiers. Full article

This study explores the application of low-power vibrothermography (LVT) for detecting barely visible impact damage (BVID) in carbon fibre-reinforced polymer (CFRP) laminates. Composite specimens with varying impact energies (2.5–20 J) were excited using a single piezoelectric transducer with a nominal centre frequency of 28 kHz, operated at a fixed excitation frequency of 28 kHz. Thermal data were captured using an infrared camera. To enhance defect visibility and suppress background noise, the raw thermal sequences were processed using principal component analysis (PCA) and robust principal component analysis (RPCA). In LVT, RPCA and PCA provided comparable signal-to-noise ratios (SNR), with no consistent advantage for either method across all cases. In contrast, for pulsed thermography (PT) data, RPCA consistently resulted in higher SNR values, except for one sample. The LVT results were further validated by comparison with PT and phased array ultrasonic testing (PAUT) data to confirm the location and shape of detected damage. These findings demonstrate that LVT, when combined with PCA or RPCA, offers a reliable method for identifying BVID and can support safer, more efficient structural health monitoring of composite materials. Full article

Tall-pier girder bridges with fluid viscous dampers (FVDs) are widely used in earthquake-prone mountainous areas. However, the influence of higher-order modes and near-field earthquakes on tall piers has rarely been studied. Based on an asymmetric tall-pier girder bridge, a finite element model is established, and the parameters of FVDs are optimized using SAP2000. The higher-order mode effects on tall piers are explored by proportionally reducing the pier heights. The pulse effects of near-field earthquakes on FVD mitigation and higher-order modes are analyzed. The optimal FVDs can coordinate the force distribution among tall piers, effectively reducing displacement responses and internal forces. Due to higher-order modes, the internal force envelopes of tall piers exhibit concave-convex distributions. As pier heights decrease, the internal force envelopes gradually become linear, implying reduced higher-order mode effects. Long-period pulse-like motions produce the maximum seismic responses because the slender tall-pier bridge is sensitive to high spectral accelerations in medium-to-long periods. The higher-order modes are more easily excited by near-field motions with large spectral values in the high-frequency range. Overall, FVDs can simultaneously reduce the seismic responses of tall piers and diminish the influence of higher-order modes. Full article