Search Results (778)

The tall wheatgrass Thinopyrum ponticum has excellent saline–alkali tolerance and great potential for restoring saline–alkali land to enhance productivity. This study used the Thinopyrum ponticum cv. “Orbit” variety, which is widely planted in saline–alkali pastures, as the material and artificially simulated salt stress using 150 mM NaCl and 150 mM Na₂SO₄, respectively. The growth and physiological indexes of the leaves and roots of seedlings were measured after various treatment durations, and the transcriptomes of untreated and Na₂SO₄-treated leaves and roots were also analyzed after 24 h of treatment. The results showed that salt stress resulted in significant reductions in leaf relative water content in seedlings and inhibited root elongation growth, with Na₂SO₄ treatment producing a greater impact on plant growth than NaCl treatment. Salt stress significantly alters ion transport and distribution in Thinopyrum ponticum, characterized by pronounced Na⁺ accumulation and a concomitant decline in K⁺ uptake. Additionally, to adapt to salt stress, roots enhance their ability to absorb and transport essential cations, such as Ca²⁺, Mg²⁺, Fe³⁺, and Cu²⁺. RNA-Seq analysis identified 1682 and 2816 differentially expressed genes (DEGs) in leaves and roots under Na₂SO₄ stress, respectively, with 210 common DEGs. Enrichment analyses revealed that DEGs were primarily associated with redox homeostasis, ion balance, and signal transduction. Furthermore, transcription regulation analysis indicated the Thinopyrum ponticum can coordinate the activation of NAC/MYB/WRKY transcription factors, SA/ETH hormone signaling, and Ca²⁺ pathways in response to salt stress. In summary, this study systematically reveals for the first time the molecular mechanisms by which Thinopyrum ponticum responds to Na₂SO₄ stress through coordinated regulation of ion transport, transcription factor networks, and hormone-Ca²⁺ signaling pathways. Based on transcriptomic and protein–protein interaction analyses, nine key candidate genes for saline–alkali tolerance were identified, including UGT7472, JMT, T4E14.7, CAX5, CP1, PXG2 NAMT1, BON3, and APX7. These findings provide novel genetic resources and a theoretical foundation for breeding salt–alkali-tolerant crops. Full article

A pressing scientific task is the development of modern extractants that meet the increased requirements for efficiency and safety. In this work, a new three-component eutectic solvent based on bis(2,4,4-trimethylpentyl)phosphinic acid (BTMPPA), tributyl phosphate (TBP) and phenol was proposed. The formation of the eutectic solvent was confirmed by IR and ³¹P NMR spectroscopy. The temperature dependences of the main physical properties of the proposed eutectic solvent—the refractive index, density and viscosity—were determined. For the first time, the extraction properties of the eutectic solvent BTMPPA/TBP/phenol (1:1:2) were studied using the example of the extraction of metal ions from aqueous nitrate solutions. The extraction efficiencies of Pr, Nd and Dy in a single stage were 34, 38 and 81%, respectively. The extraction behaviour of Pr, Nd and Dy with the eutectic solvent BTMPPA/TBP/phenol was studied as a function of pH, salting-out agent concentration, component ratio in the eutectic mixture, phase volume ratio, etc. Nitric acid with a concentration of 0.5 mol/L was chosen as a stripping agent, and the chemical stability of the eutectic solvent BTMPPA/TBP/phenol during extraction–stripping cycles was evaluated. In summary, the proposed hydrophobic eutectic solvent has good physical characteristics and enables a more efficient recovery of rare-earth elements from nitrate solutions. Full article

Recently, there has been increased interest in NASICON-type electrodes for sodium-ion batteries due to their unique combination of intercalation properties, low cost, and safety. However, their commercialization is hindered by the low electrical conductivity. One strategy to overcome this issue is to integrate NASICON materials with carbon additives. This study shows that carbon additives improve the sodium storage performance of a NASICON-type electrode in various ways, depending on the additives’ functional groups, texture, and conductivity properties. The proof-of-concept is based on a multi-electron phospho-sulphate electrode, NaFeVPO₄(SO₄)₂ (NFVPS) mixed with carbon black (C) and reduced graphene oxide (rGO). Carbon-coated samples are obtained via a simple ball milling procedure followed by thermal treatment in an argon flow. Sodium storage in the composites occurs through capacitive and Faradaic reactions. The Faradaic reaction is facilitated at the carbon black composite, while the capacitive reaction dominates for the rGO composite. NFVPS operates through two-electron reactions at 20 °C, while the increased temperatures favor the three-electron reaction. The rGO composite outperforms the carbon black composite in terms of cycling stability and rate capability at 20 and 40 °C. The role of the rGO and carbon black in electrochemical performance is discussed based on the different reactivity of hydroxyl/epoxide and carbonyl functional groups with the electrolyte salt, NaPF₆, and the solvent, polypropylene carbonate. Full article

This study deciphers the anionic modulation mechanism of halide ions (F⁻/Cl⁻) in cobalt-based hydroxides for oxygen evolution reaction (OER). Phase-pure Co(OH)₂, Co(OH)F, and Co₂(OH)₃Cl were fabricated via substrate-independent hydrothermal synthesis to eliminate conductive support interference. Electrocatalytic evaluation on glassy carbon electrodes demonstrates fluoride’s superior regulatory capability over chloride. X-ray photoelectron spectroscopy (XPS) analyses revealed that F⁻ incorporation induces charge redistribution through Co → F electron transfer, optimizing the electronic configuration via ligand effects. F⁻ incorporation simultaneously guided the anisotropic growth of 1D nanorods and reduced surface energy, thereby enhancing the wettability of Co(OH)F. The engineered Co(OH)F catalyst delivers exceptional OER performance: 318 mV overpotential at 10 mA/cm² in 1 M KOH with 94% current retention over 20 h operation. This study provides a synthetic strategy for preparing pure-phase Co(OH)F and compares halide ions’ effects on enhancing OER activity through electronic structure modulation and morphological control of basic cobalt salts. Full article

In order to enhance the anti-corrosion property of epoxy coatings on 7N01 aluminum alloy, cerium nitrate and zeolite particles were incorporated into a bis-(triethoxysilylpropyl)tetrasulfide (BTESPT) silane solution to pretreat the substrate. Scanning electron microscopy (SEM) and an electronic probe microanalyzer (EPMA) were used to characterize the morphology and chemical composition of the composite silane film. The corrosion performances of the epoxy coatings were evaluated by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) and based on the morphology and chemical composition of the interfacial region after salt spray tests. The thickness of the composite silane film at 5% BTESPT doped with 5 × 10⁻³ M cerium nitrate and 0.5 g/L zeolite particles was about 2.1 μm. The composite silane film can provide active protection to the substrate surface beneath the epoxy coating. It promotes the impedance value of the coating at 10⁻² Hz by two to three orders of magnitude and greatly lessens the interfacial region corrosion between the coating and the substrate. This effect can be ascribed to the strong barrier effect of the composite silane film and cerium ions released from the silane network and the zeolite particles. Full article

Graphene nanoshells (MGNS) were prepared from cellulose, a sustainable biopolymer. Different sizes/morphologies were obtained by simply changing the metal catalyst salt in the synthesis. The MGNS were shown to reversibly cycle Li-ions by an intercalation mechanism similar to graphite. The reversible capacity of each MGNS prepared from different metal salts correlates well to its degree of 3-D graphitic order. The small size of the MGNS allows for short Li diffusion distances and very rapid charging, obtaining a 20% charge in 36 s (100 C rate). The unique spherical structure provides stable cycling, losing only 3.8% capacity over 900 cycles, and eliminates exfoliation that occurs when cycling graphite in propylene carbonate (PC), an inexpensive, environmentally friendly electrolyte. This enables cycling in a PC-only solvent-based electrolyte, with stable cycling and high capacities at temperatures as low as −35 °C. At this very low temperature, 95% of the RT reversible capacity is retained, with only a modest charge potential increase due to the increase in viscosity of the solvent. Full article

A theoretical study was performed using Density Functional Theory (DFT) to investigate the impact of π-conjugated aliphatic chain growth on the chemical and electronic properties of hybrid antimony pentachloride salts with pyridine- and imidazolium-based cations. Ten molecular systems were optimized to determine their ground-state geometry. Using conceptual DFT, parameters such as chemical hardness, electrophilicity index, electroaccepting power, and electrodonating power were studied. The energy gap was obtained for all ten molecular systems, ranging from −4.038 to −3.706 eV as the chain length increased, favoring intramolecular charge transfer in long-chain systems. Natural bond orbital (NBO) analysis showed charge redistribution between anion and cation as the π-conjugated aliphatic chain grows. At the same time, non-covalent interaction (NCI) studies revealed key attractions and repulsive interactions, such as H···Cl and Cl···π, which are modulated by chain length. These results demonstrate that the structural modification of the cation allows for the fine-tuning of the electronic properties of ionic liquids (ILs). Increasing the conjugated aliphatic chain length was observed to reduce the chemical hardness and electrophilicity index, as well as affecting the Egap of the molecular systems. This work demonstrates that there is an optimal size for the inorganic ion, allowing it to form an optimal IL compound. Full article

To address the challenge of developing the first squaramide-based ion pair receptor acting as an iniferter in the polymerization process, a well-known BDPA molecule with specific radical functions was incorporated into its structure. The developed ditopic receptor demonstrated the ability to cooperatively bind ion pairs. Moreover, it proved to be an effective iniferter in the polymerization reaction using methyl methacrylate. The polymerization process preserved the ion-binding properties of the receptor, enabling the formation of functional polymeric materials. It was shown that the resulting polymer with the embedded receptor can be used for salt extraction from both solid and liquid phases, whereas the reference receptor lacking the BDPA unit did not exhibit this capability. This opens new avenues for the design of intelligent and selective polymeric materials for applications in supramolecular chemistry and separation technologies. Full article

The frescoed Annunziata Oratory chapel in Riofreddo (Italy), a unique testimony to the pontificate of Martin V, sheds light on the trade routes of Ninfa in the first half of the 15th century. Despite having undergone several restorations in the past (the most recent in the 2010s), the Oratory presents serious conservation issues. At first glance, there are no evident signs of biological colonization; rather, the most obvious damage is attributed to detachments and saline efflorescence. Biological colonization at several points was identified using various diagnostic field and laboratory techniques such as ATPase point analysis, field stereoscopy in visible and UV light, culture-based and molecular approaches, Raman spectroscopy, and SEM analysis, biological colonization at several points was identified. The characterization of salt efflorescence was carried out using ion chromatography analysis. The presence of bacteria, fungi and algae, which are also linked to saline efflorescence, was observed. A clear correlation between the biological colonization and salt efflorescence composition was highlighted by our results, as well as the potential sources of microorganisms and salts via the capillary rise of groundwater. This early diagnostic approach regarding the presence of lithobionts and salt efflorescence demonstrates the complex interplay between environmental factors and microbial colonization, which can lead to biodeterioration processes. Full article

Soil salinization severely limits plant growth and productivity. Mulberry (Morus alba L.), an economically and ecologically important tree, is widely cultivated, yet its salt-tolerance mechanisms at the seedling stage remain insufficiently understood. This study investigated the physiological and biochemical responses of two-year-old mulberry (‘Tailai Sang’) seedlings subjected to six NaCl treatments (0, 50, 100, 150, 200, and 300 mmol L⁻¹) for 28 days. Results showed that growth parameters and photosynthetic gas exchange exhibited dose-dependent declines. The reduction in net photosynthetic rate (Pn) was attributed to both stomatal limitations (decreased stomatal conductance) and non-stomatal limitations, as evidenced by a significant decrease in the maximum quantum efficiency of photosystem II (Fv/Fm) under high salinity. To cope with osmotic stress, seedlings accumulated compatible solutes, including soluble sugars, proteins, and proline. Critically, mulberry seedlings demonstrated effective ion homeostasis by sequestering Na⁺ in the roots to maintain a high K⁺/Na⁺ ratio in leaves, a mechanism that was compromised above 150 mmol L⁻¹. Concurrently, indicators of oxidative stress—malondialdehyde (MDA) and H₂O₂—rose significantly with salinity, inducing the activities of antioxidant enzymes (SOD, CAT, APX, and GR), which peaked at 150 mmol L⁻¹ before declining under extreme stress. A biomass-based LC₅₀ of 179 mmol L⁻¹ NaCl was determined. These findings elucidate that mulberry salt tolerance is a coordinated process involving three key mechanisms: osmotic adjustment, selective ion distribution, and a robust antioxidant defense system. This study establishes an indicative tolerance threshold under controlled conditions and provides a physiological basis for further field-based evaluations of ‘Tailai Sang’ mulberry for cultivation on saline soils. Full article

In shallow groundwater areas, the freeze–thaw process can easily exacerbate soil salinization. The variations and migrations of Na⁺, K⁺, Ca²⁺, Mg²⁺, Cl⁻, SO₄²⁻, and HCO₃⁻ at the depth of 0–100 cm under shallow groundwater depth (2.63–2.87 m) during the freeze–thaw period were analyzed. And a multi-index comprehensive evaluation method based on factor analysis was employed to investigate the soil salinization degree. The results show that K⁺, Mg²⁺, and HCO₃⁻ exhibited surface enrichment during the freeze–thaw period, while Na⁺, Cl⁻, and SO₄²⁻ accumulated in the frozen layer during the freezing stage. However, there is no surface enrichment of Ca²⁺. During the freezing stage, Mg²⁺ and Cl⁻ exhibited the strongest migration capabilities among cations and anions, respectively. During the thawing stage, K⁺ and HCO₃⁻ were the cation and anion with the highest ionic migration capabilities, respectively. Total salinity (TS), Cl⁻, SO₄²⁻, HCO₃⁻, Na⁺, K⁺, Mg²⁺, and residual sodium carbonate (RSC) were identified as the dominant factors influencing the salinization degree during the freeze–thaw period. During the freezing stage, soil salt ions predominantly migrated from the unfrozen to the frozen layer, and the salinization degree in the frozen layer increased with the development of the frozen layer. In the thawing stage, soil salt ions migrated upward from the thawing front, and the salinization degree at the depth of 0–30 cm increased. This study provides insights for the prevention and control of soil salinization in arid regions. Full article

Electrochromic (EC) devices are gaining increasing attention for next-generation smart windows and low-power displays due to their reversible color modulation, low operating voltage, and flexible form factors. Recently, electrochromic energy storage devices (EESDs) have emerged as a promising class of multifunctional systems, enabling simultaneous energy storage and real-time visual monitoring. In this study, we report a flexible dual-functional EESD constructed using polyaniline (PANI) films doped with anthraquinone-1-sulfonic acid sodium salt (AQS), coupled with a redox-active PVA-based gel electrolyte also incorporating AQS. The incorporation of AQS into both the polymer matrix and the gel electrolyte introduces synergistic redox activity, facilitating bidirectional Faradaic reactions at the film–electrolyte interface and within the bulk gel phase. The resulting vertically aligned PANI-AQS nanoneedle films provide high surface area and efficient ion pathways, while the AQS-doped gel electrolyte contributes to enhanced ionic conductivity and electrochemical stability. The device exhibits rapid and reversible color switching from light green to deep black (within 2 s), along with a high areal capacitance of 194.2 mF·cm⁻² at 1 mA·cm⁻² and 72.1% capacitance retention over 5000 cycles—representing a 31.5% improvement over undoped systems. These results highlight the critical role of redox-functionalized gel electrolytes in enhancing both the energy storage and optical performance of EESDs, offering a scalable strategy for multifunctional, gel-based electrochemical systems in wearable and smart electronics. Full article

Due to the complex mineral composition, low clay content, and strong heterogeneity of the mixed sedimentary shale in the Xinjiang Salt Lake Basin, the wettability characteristics of the reservoir and their influencing factors are not yet clear, which restricts the evaluation of oil-bearing properties and the identification of sweet spots. This paper analyzed mixed sedimentary shale samples from the Lucaogou Formation of the Jimsar Sag and the Fengcheng Formation of the Mahu Sag. Methods such as petrographic thin sections, X-ray diffraction, organic matter content analysis, and argon ion polishing scanning electron microscopy were used to examine the lithological and mineralogical characteristics, geochemical characteristics, and pore space characteristics of the mixed sedimentary shale reservoir. Alternating imbibition and nuclear magnetic resonance were employed to quantitatively characterize the wettability of the reservoir and to discuss the effects of compositional factors, lamina types, and pore structure on wettability. Research findings indicate that the total porosity, measured by the alternate imbibition method, reached 72% of the core porosity volume, confirming the effectiveness of alternate imbibition in filling open pores. The Lucaogou Formation exhibits moderate to strong oil-wet wettability, with oil-wet pores predominating and well-developed storage spaces; the Fengcheng Formation has a wide range of wettability, with a higher proportion of mixed-wet pores, strong heterogeneity, and weaker oil-wet properties compared to the Lucaogou Formation. TOC content has a two-segment relationship with wettability, where oil-wet properties increase with TOC content at low TOC levels, while at high TOC levels, the influence of minerals such as carbonates dominates; carbonate content shows an “L” type response to wettability, enhancing oil-wet properties at low levels (<20%), but reducing it due to the continuous weakening effect of minerals when excessive. Lamina types in the Fengcheng Formation significantly affect wettability differentiation, with carbonate-shale laminae dominating oil pores, siliceous laminae contributing to water pores, and carbonate–feldspathic laminae forming mixed pores; the Lucaogou Formation lacks significant laminae, and wettability is controlled by the synergistic effects of minerals, organic matter, and pore structure. Increased porosity strengthens oil-wet properties, with micropores promoting oil adsorption through their high specific surface area, while macropores dominate in terms of storage capacity. Wettability is the result of the synergistic effects of multiple factors, including TOC, minerals, lamina types, and pore structure. Based on the characteristic that oil-wet pores account for up to 74% in shale reservoirs (mixed-wet 12%, water-wet 14%), a wettability-targeted regulation strategy is implemented during actual shale development. Surfactants are used to modify oil-wet pores, while the natural state of water-wet and mixed-wet pores is maintained to avoid interference and preserve spontaneous imbibition advantages. The soaking period is thus compressed from 30 days to 3–5 days, thereby enhancing matrix displacement efficiency. Full article

The use of chloride-based deicing salts, particularly sodium chloride (NaCl) and calcium chloride (CaCl₂), is a common practice in cold regions for maintaining road safety during winter. However, the accumulation of salt residues in adjacent soils poses serious environmental threats, including reduced pH, increased electrical conductivity (EC), disrupted soil structure, and plant growth inhibition. This study aimed to evaluate the combined effect of activated carbon (AC) and Pennisetum alopecuroides, a salt-tolerant perennial grass, in alleviating salinity stress under deicer-treated soils. A factorial greenhouse experiment was conducted using three fixed factors: (i) presence or absence of Pennisetum alopecuroides, (ii) deicer type (NaCl or CaCl₂), and (iii) activated carbon mixing ratio (0, 1, 2, 5, and 10%). Soil pH, EC, and ion concentrations (Na⁺, Cl⁻, Ca²⁺) were measured, along with six plant growth indicators. The results showed that increasing AC concentrations significantly increased pH and reduced EC and ion accumulation, with the 5% AC treatment being optimal in both deicer systems. Plant physiological responses were improved in AC-amended soils, especially under CaCl₂ treatment, indicating less ion toxicity and better root zone conditions. The interaction effects between AC, deicer type, and plant presence were statistically significant (p < 0.05), supporting a synergistic remediation mechanism involving both adsorption and biological uptake. Despite the limitations of short-term controlled conditions, this study offers a promising phytomanagement strategy using natural adsorbents and salt-tolerant plants for sustainable remediation of salt-affected soils in road-adjacent and urban environments. Full article

The primary worldwide variables limiting plant development and agricultural output are the ever-present threat that environmental stressors such as salt (may trigger osmotic stress plus ions toxicity, which impact on growth and yield of the plants), drought (provokes water stress, resulting in lowering photosynthesis process and growth rate), heavy metals (induced toxicity, hindering physiological processes also lowering crop quantity and quality), and pathogens (induce diseases that may significantly affect plant health beside productivity). This review explores the integrated effects of these stressors on plant productivity and growth rate, emphasizing how each stressor exceptionally plays a role in physiological responses. Owing to developments in technology that outclass traditional breeding methods and genetic engineering techniques, powerful alleviation strategies are vital. New findings have demonstrated the remarkable role of nanoparticles in regulating responses to these environmental stressors. In this review, we summarize the roles and various applications of nanomaterials in regulating abiotic and biotic stress responses. This review discusses and explores the relationship between various types of nanoparticles (metal, carbon-based, and biogenic) and their impact on plant physiology. Furthermore, we assess how nanoparticle technology may play a role in practices of sustainable agriculture by reducing the amount of compounds used, providing them with a larger surface area, highly efficient mass transfer abilities, and controlled, targeted delivery of lower nutrient or pesticide amounts. A review of data from several published studies leads to the conclusion that nanoparticles may act as a synergistic effect, which can effectively increase plant stress tolerance and their nutritional role. Full article