Search Results (76)

The structure and geomorphology of channel systems play a critical role in interpreting sedimentary processes and characterizing subsurface reservoir capacity. This study presents an innovative 3D DS-TransUnet model for seismic channel interpretation. The model incorporates a multi-scale Swin Transformer architecture capable of processing 3D data in both the encoder and decoder, and integrates a feature fusion module into the skip connections to effectively combine shallow detail features with deep semantic features, thereby enhancing the detectability of weak reflection signals. This design not only enables the network to capture global dependencies but also preserves fine-grained local details, allowing for more robust feature learning under complex geological conditions. In addition, a complete synthetic data generation workflow is proposed, through which 300 pairs of high-quality synthetic data were constructed for model training. During training, the proposed model achieved a significantly faster convergence speed compared with other selected models. Experimental results on both synthetic and field seismic datasets demonstrate that the proposed method yields substantial improvements in channel boundary delineation accuracy and interference suppression, providing an efficient and reliable approach for intelligent channel recognition. Full article

The Lower Congo Basin (LCB) and the Niger Delta Basin (NDB), two end-member deep-water systems along the West African passive margin, exhibit contrasting sedimentary architectures despite shared geodynamic settings. The research comprehensively utilizes seismic reflection structure, root mean square amplitude slices, drilling lithology, changes in logging curves, and previous research achievements to elucidate the controlling mechanisms behind these differences. Key findings include: (1) Stark depositional contrast: Since the Eocene, the LCB developed retrogradational narrow-shelf systems dominated by erosional channels and terminal lobes, whereas the NDB formed progradational broad-shelf complexes with fan lobes and delta-fed turbidites. (2) Primary controls: Diapir-driven topographic features and basement uplift govern architectural variability, whereas shelf-slope break configuration and oceanic relief constitute subordinate controls. (3) Novel mechanism: First quantification of how diapir-induced seafloor relief redirects sediment pathways and amplifies facies heterogeneity. These insights establish a tectono-sedimentary framework for predicting deep-water reservoirs in diapir-affected passive margins, refine the conventional “source-to-sink” model by emphasizing salt-geomorphic features coupling as the primary driver. By analyzing the differences in lithofacies assemblages and sedimentary configurations among the above-mentioned different basins, this study can provide beneficial insights for the research on related deep-water turbidity current systems and also offer guidance for deep-water oil and gas exploration and development in the West African region and other similar areas. Full article

The Shahejie Formation in Nanpu Sag is a crucial region for deep-layer hydrocarbon exploration in the Bohai Bay Basin. To address the impact of faults on sublacustrine fan formation and spatial distribution within the study area, this study integrated well logging, laboratory analysis, and 3D seismic data to systematically analyze sedimentary characteristics of sandbodies from the first member of the Shahejie Formation (Es₁) sublacustrine fans, clarifying their planar and cross-sectional distributions. Further research indicates that Gaoliu Fault activity during Es₁ deposition played a significant role in fan development through two mechanisms: (1) vertical displacement between hanging wall and footwall reshaped local paleogeomorphology; (2) tectonic stresses generated by fault movement affected slope stability, triggering gravitational mass transport processes that remobilized fan delta sediments into the central depression zone as sublacustrine fans through slumping and collapse mechanisms. Core observations reveal soft-sediment deformation features, including slump structures, flame structures, and shale rip-up clasts. Seismic profiles show lens-shaped geometries with thick centers thinning laterally, exhibiting lateral pinch-out terminations. Inverse fault-step architectures formed by underlying faults control sandbody distribution patterns, restricting primary deposition locations for sublacustrine fan development. The study demonstrates that sublacustrine fans in the study area are formed by gravity flow processes. A new model was established, illustrating the combined control of the Gaoliu Fault and reverse stepover faults on fan development. These findings provide valuable insights for gravity flow exploration and reservoir prediction in the Nanpu Sag, offering important implications for hydrocarbon exploration in similar lacustrine rift basins. Full article

The southeastern Yunnan region in the southwestern Nanpanjiang Basin is one of the most important manganese enrichment zones in China. Manganese mineralization is mainly confined to marine mud–sand–carbonate interbeds of the Middle Triassic Ladinian Falang Formation (T₂f), which contains several medium to large deposits such as Dounan, Baixian, and Yanzijiao. However, the geological processes that control manganese mineralization in this region remain insufficiently understood. Understanding the tectonic evolution of the basin is therefore essential to unravel the mechanisms of Middle Triassic metallogenesis. This study investigates how rift-related tectonic activity influences manganese ore formation. This study integrates global gravity and magnetic field models (WGM2012, EMAG2v3), audio-frequency magnetotelluric (AMT) profiles, and regional geological data to investigate ore-controlling structures. A distinct gravity low–magnetic high belt is delineated along the basin axis, indicating lithospheric thinning and enhanced mantle-derived heat flow. Structural interpretation reveals a rift system with a checkerboard pattern formed by intersecting NE-trending major faults and NW-trending secondary faults. Four hydrothermal plume centers are identified at these fault intersections. AMT profiles show that manganese ore bodies correspond to stable low-resistivity zones, suggesting fluid-rich, hydrothermally altered horizons. These findings demonstrate a strong spatial coupling between hydrothermal activity and mineralization. This study provides the first identification of the internal rift architecture within the Nanpanjiang Basin. The basin-scale rift–graben system exerts first-order control on sedimentation and manganese metallogenesis, supporting a trinity model of tectonic control, hydrothermal fluid transport, and sedimentary enrichment. These insights not only improve our understanding of rift-related manganese formation in southeastern Yunnan but also offer a methodological framework applicable to similar rift basins worldwide. Full article

The description and assessment of braided river architecture are usually limited by the paucity of real geological datasets from field observations; due to the complexity and diversity of rivers, traditional evaluation models are difficult to apply to braided river systems in different climatic and tectonic settings. This study aims to establish an architectural model suitable for the study area setting by introducing a hierarchical analysis approach through well-exposed three-dimensional outcrops along the Second Songhua River. A micro–macro four-level hierarchical framework is adopted to obtain a detailed anatomy of sedimentary outcrops: lithofacies, elements, element associations, and archetypes. Fourteen lithofacies are identified: three conglomerates, seven sandstones, and four mudstones. Five elements provide the basic components of the river system framework: fluvial channel, laterally accreting bar, downstream accreting bar, abandoned channel, and floodplain. Four combinations of adjacent elements are determined: fluvial channel and downstream accreting bar, fluvial channel and laterally accreting bar, erosionally based fluvial channel and laterally accreting bar, and abandoned channel and floodplain. Considering the sedimentary evolution process, the braided river prototype, which is an element-based channel filling unit, is established by documenting three contact combinations between different elements and six types of fine-grained deposits’ preservation positions in the elements. Empirical relationships are developed among the bankfull channel depth, mean bankfull channel depth, and bankfull channel width. For the braided river systems, the establishment of the model promotes understanding of the architecture and evolution, and the application of the hierarchical analysis approach provides a basis for outcrop, underground reservoir, and tank experiments. Full article

The Kekeya oilfield is located at the southwestern edge of the Tarim Basin, in the southern margin of the Yecheng depression, at the western end of the second structural belt of the northern foothills of the Kunlun Mountains. It is one of the important oil and gas fields in western China, with significant oil and gas resource potential in the X4-X5 section of the Xihepu Formation. This study focuses on the edge of the alluvial fan depositional system, employing various techniques, including core data and well logging data, to precisely characterize the sand body architecture and comprehensively analyze the reservoir architecture in the study area. First, the regional geological background of the area is analyzed, clarifying the sedimentary environment and evolutionary process of the Xihepu Formation. Based on the sedimentary environment and microfacies classification, the sedimentary features of the region are revealed. On this basis, using reservoir architecture element analysis, the interfaces of the reservoir architecture are finely subdivided. The spatial distribution characteristics of the planar architecture are discussed, and the spatial distribution and internal architecture of individual sand body units are analyzed. The study focuses on the spatial combination of microfacies units along the profile and their internal distribution patterns. Additionally, a quantitative analysis of the sizes of various types of sand bodies is conducted, constructing the sedimentary model for the region and revealing the control mechanisms of different sedimentary architectures on reservoir properties and oil and gas accumulation patterns. This study pioneers a quantitative model for alluvial fan fringe in gentle-slope basins, featuring the following: (1) lobe width-thickness ratios (avg. 128), (2) four base-level-sensitive boundary markers, and (3) a retrogradational stacking mechanism. The findings directly inform reservoir development in analogous arid-climate systems. This research not only provides a scientific basis for the exploration and development of the Kekeya oilfield but also serves as an important reference for reservoir architecture studies in similar geological contexts. Full article

The lacustrine to deltaic depositional systems of the Upper Jurassic Qigu Formation in the Yongjin area constitute a significant petroleum reservoir in the central Junggar Basin, China. Based on core observations, petrology analyses, paleoenvironment indicators and modern sedimentary analyses, sequence stratigraphy, lithofacies associations, sedimentary environment, evolution, and models were investigated. The Qigu Formation can be divided into a third-order sequence consisting of a lowstand systems tract (LST) and a transgressive systems tract (TST), which is further subdivided into six fourth-order sequences. Thirteen lithofacies and five lithofacies associations were identified, corresponding to shallow-water delta-front deposits. The paleoenvironment of the Qigu Formation is generally characterized by an arid freshwater environment, with a dysoxic to oxic environment. During the LST depositional period (SQ1–SQ3), the water depth was relatively shallow with abundant sediment supply, resulting in a widespread distribution of channel and mouth bar deposits. During the TST depositional period (SQ4–SQ6), the rapid rise in base level, combined with reduced sediment supply, resulted in swift delta retrogradation and widespread lacustrine sedimentation. Combined with modern sedimentary analysis, the shallow-water delta in the study area primarily comprises a composite system of single main channels and distributary channel-mouth bar complexes. The channel-bar complex eventually forms radially distributed bar assemblages with lateral incision and stacking. The distributary channel could incise a mouth bar deeply or shallowly, typically forming architectural patterns of going over or in the mouth bar. Reservoir test data suggest that the mouth bar sandstones are favorable targets for lithological reservoir exploration in shallow-water deltas. Full article

The Moxi area in the Sichuan Basin hosts abundant deep geothermal resources, but their thermal regime and accumulation mechanisms remain poorly understood. Using 2D/3D seismic data, drilling records, and temperature measurements (DST), we analyze deep thermal fields, reservoir–caprock systems, and structural features. The following are our key findings: (1) Heat transfer is conduction-dominated, with thermal anomalies in Late Permian–Early Cambrian strata. Four mudstone/shale caprocks and three carbonate reservoirs occur, with the Longtan Formation as the key seal. Reservoir geothermal gradients (25.05–32.55 °C/km) exceed basin averages. (2) Transtensional strike-slip faults form E-W/NE/NW networks; most terminate at the Permian Longtan Formation, with few extending into the Lower Triassic while penetrating the Archean–Lower Proterozoic basement. (3) Structural highs positively correlate with higher geothermal gradients. (4) The deep geothermal reservoirs and thermal accumulation mechanisms in the Moxi area are jointly controlled by crustal thinning, basement uplift, and structural architecture. Mantle-derived heat converges at basement uplift cores, generating localized thermal anomalies. Fault networks connect these deep heat sources, facilitating upward fluid migration. Thick Longtan Formation shale seals these rising thermal fluids, causing anomalous heating in underlying strata and concentrated thermal accumulation in reservoirs—enhanced by thermal focusing effects from uplift structures. This study establishes a theoretical framework for target selection and industrial-scale geothermal exploitation in sedimentary basins, highlighting the potential for repurposing oil/gas infrastructure. Full article

This study presents the first detailed analysis of a Late Pleistocene cliff-front dune in northern Mallorca (Western Mediterranean). The research is based on sedimentological fieldwork conducted in a disused coastal quarry, where stratigraphic columns were recorded and facies were described in detail. Grain size analysis was performed using image-based measurements from representative samples, and palaeowind conditions were reconstructed through the analysis of cross-bedding orientations and empirical wind transport equations. The dune, corresponding to Unit U4, exhibits three distinct evolutionary stages: initial, intermediate, and final. During the initial stage, sediment mobilisation required wind speeds of approximately 10 m/s from the south-southwest (SSW). The intermediate stage was characterised by variable wind velocities between 5 and 8 m/s from the west-southwest (WSW). In the final stage, average wind speeds reached 7 m/s from the west (W), with intermittent peaks up to 10 m/s. These findings underscore the critical influence of wind regime and topographic constraints on aeolian sedimentation processes. By reconstructing wind dynamics and analysing sedimentary architecture, this work provides key insights into the interplay between climatic drivers and geological context in the development of coastal aeolian systems. Full article

Formation Microresistivity Scanner Imaging (FMI) plays a crucial role in identifying lithology, sedimentary structures, fractures, and reservoir evaluation. However, during the lithology identification process of FMI images relying on transfer learning networks, the limited dataset size of existing models and their relatively primitive architecture substantially compromise the accuracy of well-log interpretation results and practical production efficiency. This study employs the VGG-19 transfer learning model as its core framework to conduct preprocessing, feature extraction, and analysis of FMI well-log images from glutenite formations in an oilfield in Xinjiang, with the objective of achieving rapid and accurate intelligent identification and classification of formation lithology. Simultaneously, this paper emphasizes a systematic comparative analysis of the recognition performance between the VGG-19 model and existing models, such as GoogLeNet and Xception, to screen for the model exhibiting the strongest region-specific applicability. The study finds that lithology can be classified into five types based on physical structures and diagnostic criteria: gray glutenite, brown glutenite, fine sandstone, conglomerate, and mudstone. The research results demonstrate the VGG-19 model exhibits superior accuracy in identifying FMI images compared to the other two models; the VGG-19 model achieves a training accuracy of 99.64%, a loss value of 0.034, and a validation accuracy of 95.6%; the GoogLeNet model achieves a training accuracy of 96.1%, a loss value of 0.05615, and a validation accuracy of 90.38%; and the Xception model achieves a training accuracy of 91.3%, a loss value of 0.0713, and a validation accuracy of 87.15%. These findings are anticipated to provide a significant reference for the in-depth application of VGG-19 transfer learning in FMI well-log interpretation. Full article

Numerous uncertainties persist regarding the differential enrichment mechanisms of shale gas reservoirs in southern China. This investigation systematically examines the sedimentary environments and reservoir characteristics of the Wufeng–Longmaxi formations in the Changning area of the Sichuan Basin, through the integration of comprehensive drilling data, core samples, and analytical measurements. Multivariate sedimentary proxies (including redox conditions, terrigenous detrital influx, basinal water restriction, paleoclimatic parameters, paleowater depth variations, and paleo-marine productivity) were employed to elucidate environmental controls on reservoir development. The research findings demonstrate that during the depositional period of the Wufeng Formation in the Changning area, the bottom water was characterized by suboxic to anoxic conditions under a warm-humid paleoclimate, with limited terrigenous detrital input and strong water column restriction throughout the interval. Within the Longmaxi Formation, the depositional environment evolved from intensely anoxic conditions in the LM1 through suboxic states in the LM3 interval, approaching toxic conditions by the LM2 depositional phase. Concurrently, the paleoclimate transitioned towards warmer and more humid conditions, accompanied by progressively intensified terrigenous input from the LM1-LM6, while maintaining semi-restricted water circulation. Both paleowater depth and paleoproductivity peaked from the Wufeng Formation to the LM1 interval, followed by gradual shallowing of water depth and declining productivity during the LM3–LM6 depositional phases. Comparative analysis of depositional environments and reservoir characteristics reveals that sedimentary conditions exert a controlling influence on multiple reservoir parameters, including shale mineral composition, organic matter enrichment, pore architecture, petrophysical properties (e.g., porosity, permeability), and gas-bearing potential. Full article

The South Tianshan records the latest accretionary and collisional events in the southwestern Altaids, but the internal subduction-related processes are controversial. This study provides an integrative analysis of a newly identified Late Carboniferous adakitic granodiorite from the South Tianshan, incorporating geochronological, zircon U-Pb and Lu-Hf isotopic, whole-rock geochemical, and Sr-Nd isotopic data. Zircon U-Pb analysis indicates that the granite was emplaced at 310 ± 2.5 Ma. Based on major element compositions, the granodiorite belongs to medium-K calc-alkaline weakly peraluminous series (A/CNK = 0.95–1.09). The samples exhibit typical high-silica adakitic affinity, as evidenced by the elevated contents of SiO₂ (67.75–69.27 wt.%), Al₂O₃ (15.29–15.90 wt.%), Sr (479–530 ppm), and Ba (860–910 ppm); low concentrations of Yb (0.43–0.47 ppm) and Y (7.12–7.44 ppm); high Sr/Y ratios (67–72); and slight Eu anomalies (δEu = 0.89–1.03). The sodium-rich composition (K₂O/Na₂O = 0.48–0.71) is comparable to adakitic rocks from slab-derived melts. Elevated concentrations of Ni (22.12–24.25 ppm), Cr (33.20–37.86 ppm), Co (6.32–6.75 ppm), and V (30.33–32.48 ppm), along with high Mg# values (55–57), suggest melt–mantle interaction during magma ascent. The slightly enriched isotopic signatures, characterized by higher initial ⁸⁷Sr/⁸⁶Sr ratios (0.706086–0.706205) and lower ε_Nd(t) (−3.09 to –2.47) and ε_Hf(t) (−3.11 to +7.66) values, point to notable sedimentary contributions, potentially through source contamination and/or shallow-level crustal contamination. By integrating the new results with previously published data, we consider that the adakitic granodiorite was generated by partial melting of the subducted oceanic crust, triggered by asthenospheric upwelling associated with the southward rollback of the north-dipping South Tianshan oceanic lithosphere. Our data provide new insights into Late Carboniferous retreating subduction along the southern active margin of the Yili-Central Tianshan and the accretionary architecture of the southern Altaids. Full article

This study quantitatively investigates monsoon-driven bedload sediment transport mechanisms in the Qiongzhou Strait using the SCHISM model, revealing three key findings: (1) Monsoon seasonality governs net sediment flux through contrasting hydrodynamic regimes, with the winter monsoon establishing spatially coherent westward transport pathways, while the summer monsoon induces counteracting flow patterns that suppress net transport. (2) Winter conditions exhibit opposing transport vectors between tidal and monsoon forcing at both strait entrances, with monsoon dominance at the western entrance contrasting tidal predominance in the eastern sector. (3) Summer monsoon–tide hydrodynamic decoupling results in transport magnitudes ≤ 10% of tidal-driven quantities across critical cross-sections. The research elucidates sediment budget partitioning mechanisms in monsoon-dominated shelf seas, particularly revealing a spatial reversal of dominant transport drivers between eastern and western gateways that mechanistically explains observed sedimentary architecture asymmetries. By innovatively quantifying spatiotemporal coupling effects of meteorological and tidal forcing, this work advances theoretical understanding of sediment flux allocation under monsoonal systems and provides scientific support for seabed resource management and geomorphological evolution predictions. Full article

The Permian Lucaogou Formation (PLF) shale oil reservoirs in the Junggar Basin exhibit significant lithological heterogeneity, which limits the understanding of the relationship between macroscopic and microscopic reservoir characteristics, as well as insights into reservoir quality. To address this gap, thirty core samples, exhibiting typical sedimentary features, were selected from a 46 m section of the PLF for sedimentological analysis, thin section examination, high-performance microarea scanning, and scanning electron microscopy. Seven main lithofacies were identified, including massive bedding slitstone/fine-grained sandstone (LS1), cross to parallel bedding siltstone (LS2), climbing ripple laminated argillaceous siltstone (LS3), paired graded bedding argillaceous siltstone (LS4), irregular laminated argillaceous siltstone (LS5), irregular laminated silty mudstone (LM2), and horizontal laminated mudstone (LM2). The paired graded bedding sequences with internal erosion surfaces, massive bedding, and terrestrial plant fragments suggest a lacustrine hyperpycnal flow origin. The channel subfacies of hyperpycnal flow deposits, primarily consisting of LS1 and LS2, reflect strong hydrodynamic conditions, with a single-layer thickness ranging from 1.3 to 3.8 m (averaging 2.2 m) and porosity between 7.8 and 14.2% (averaging 12.5%), representing the primary sweet spot. The lobe subfacies, composed mainly of LS3, LS4, and LS5, reflect relatively strong hydrodynamic conditions, with a single-layer thickness ranging from 0.5 to 1.4 m (averaging 0.8 m) and porosity between 4.2 and 13.8% (averaging 9.6%), representing the secondary sweet spot. In conclusion, strong hydrodynamic conditions and depositional microfacies are key factors in the formation and distribution of sweet spots. The findings of this study are valuable for identifying sweet spots in the PLF and provide useful guidance for the exploration of lacustrine shale oil reservoirs in the context of hyperpycnal flow deposition globally. Full article

Seismic sedimentology and sequence stratigraphy, as emerging interdisciplinary fields, demonstrate unique advantages in characterizing seismic geomorphological responses of various system tracts within the stratigraphic frameworks of rift lacustrine basins. Focusing on the Paleogene Dainan Formation in the Gaoyou Sag of the Subei Basin, eastern China, this study integrates seismic termination patterns, sedimentary cyclicity analysis, and well-to-seismic calibration to subdivide the formation into three third-order sequences containing lowstand (LST), transgressive (TST), and highstand (HST) system tracts. The distribution of five distinct sedimentary facies exhibits pronounced sub-tectonic zonations controlled by the basin’s architecture and structural evolution, with steep slope zones dominated by nearshore subaqueous fan–fan delta complexes, gentle slopes developing normal deltaic systems, and deep-semi-deep lacustrine facies with slump turbidite fans concentrated in depositional centers. Through a novel application of 90° phase adjustment, spectral decomposition, and multi-attribute fusion techniques, the relationship between seismic amplitude attributes and lithologies are established via seismic lithology calibration. Detailed sequence evolution analyses and seismic geomorphological interpretation systematically elucidate the spatio-temporal evolution of depositional systems within different system tracts in rift lacustrine basins, providing a novel methodological framework for sequence stratigraphic analysis in continental rift settings. Full article