Search Results (13)

This study investigates the interaction between the skin and stiffeners under tension and the structural failure mechanisms of aluminum alloy stiffened panels after battle damage, employing an integrated approach of experimental testing and numerical simulation. The variation in the residual strength of the stiffened panels with the characteristics of ruptures was explored, and an assessment method for residual strength was proposed based on the net-section failure criterion. The results indicate that the residual strength of the stiffened panels is closely related to the location and size of the rupture. For panels with ruptures of equal area, the residual strength is lowest for those with web damage, followed by those with flange damage, and highest for those with skin damage only. By employing an area-based conversion method, the three-dimensional stiffened panel was simplified to a two-dimensional plate. A stress averaging coefficient was introduced for large eccentric ruptures, while a conversion factor was applied for small eccentric ruptures to modify the residual strength assessment. The results demonstrate high accuracy. This study provides an efficient and precise method for evaluating the residual strength of damaged stiffened panels, offering a theoretical basis for aircraft battle damage repair. Full article

Many structures use stiffeners to improve their strength and stability and especially to stop the growth of cracks that can appear during the manufacturing process or in service. The most used stiffeners have rectangular cross-sections, other shapes being less used to strengthen mechanical structures. A numerical study of cracked aluminum plates reinforced with different types of stiffeners is presented in this paper to study the influence of different types of stringers on the structural integrity of the plates. Continuously attached stiffeners with rectangular, L- and T-shaped cross-sections are considered in two variants: with the stiffener broken and unbroken. A numerical model is developed and validated by comparing the obtained results with those calculated using the compounding method. It is shown that an important variation in the stress intensity factor occurs though the thickness of the plate and that stiffeners with the same area yield approximately the same average values of the stress intensity factor. However, the shape of the stiffeners influences the maximum stress intensity factors, which are responsible for the crack growth. Conclusions are drawn about the shape that provides a longer lifetime and higher critical stresses at which catastrophic failure may occur. Full article

Multiscale parameter optimization for laser peen forming (LPF) on 6005A-T6 aluminum alloy plates was conducted through a combination of simulation and experimentation. By obtaining the optimal parameter, this study aims to explore the constrained deformation and forming laws of the integral stiffened plates. Detailed descriptions were provided regarding the dynamic response process and transient behavior of aluminum alloy plates under ultrahigh strain rates, along with an in-depth analysis of the stress evolution. The results reveal that laser beam diameter and laser beam energy can achieve large range forming, while the number of tracks facilitates the precise deformation adjustment. During the 12-track LPF process, there is an overall upward trend in deformation values accompanied by a dynamic increase in the bend curvature. After static relaxation, the deformation value recovers to 55.2% of the final bending curvature. The chord direction scanning of stiffened plates exhibits a larger bending curvature, indicating its greater forming capacity for large-sized single unfolding direction formation; whereas, the unfolding direction scanning of stiffened plates excels in achieving efficient integrated two-way forming. Full article

Gantries and beams, as the main load-bearing structures of heavy equipment, usually belong to the box structure consisting of outer walls and inner stiffened plates. The structure of the stiffener layout is bulky due to empirical design, leading to higher material consumption and impacting mechanical performance. There are challenges in effectively identifying load-transferred paths within 3D box structures through direct topological optimization. A method for optimizing the layout of internal stiffened plates of large box structures based on load paths is proposed in this paper. Initially, based on the load conditions acting on the structure, the 3D box structure is decomposed into 2D functional sections. Subsequently, the load paths on the functional cross-section are visualized according to the load path method. Finally, the stiffener layout of the ultimate optimized structure is designed according to the effective load path distribution. Taking the gantry of a heavy-duty aluminum ingot composite processing unit as an example, the optimization results indicate that the maximum stress of the structure decreased by 14.9%, the maximum deformation reduced by 32.95%, and the overall weight decreased by 14.4%. This demonstrates that the approach proposed in this paper is practical and effective for optimizing stiffener layouts in large-box structures. Full article

To detect damage in mechanical structures, acoustic emission (AE) inspection is considered as a powerful tool. Generally, the classical acoustic emission detection method uses a sparse sensor array to identify damage and its location. It often depends on a pre-defined wave velocity and it is difficult to yield a high localization accuracy for complicated structures using this method. In this paper, the passive guided wave phased array method, a dense sensor array method, is studied, aiming to obtain better AE localization accuracy in aluminum thin plates. Specifically, the proposed method uses a cross-shaped phased array enhanced with four additional far-end sensors for AE source localization. The proposed two-step method first calculates the real-time velocity and the polar angle of the AE source using the phased array algorithm, and then solves the location of the AE source with the additional far-end sensor. Both numerical and physical experiments on an aluminum flat panel are carried out to validate the proposed method. It is found that using the cross-shaped guided wave phased array method with enhanced far-end sensors can localize the coordinates of the AE source accurately without knowing the wave velocity in advance. The proposed method is also extended to a stiffened thin-walled structure with high localization accuracy, which validates its AE source localization ability for complicated structures. Finally, the influences of cross-shaped phased array element number and the time window length on the proposed method are discussed in detail. Full article

Guided wave array-based structural health monitoring (SHM) is a promising solution for diagnosing damage in metal-connected structures. In this field, the reconstruction algorithm for probabilistic inspection (RAPID) is one of the most widely used algorithms for performing damage localization. In this paper, a density clustering RAPID based on an array-compensated damage index is proposed. A new probability distribution function was constructed based on a new damage index, which is adaptive to different elements in the sensor array to compensate for performance variation. Then, the imaging matrix of the RAPID algorithm was density-clustered to obtain the location and degree of damage. Finally, the method was verified by experiments on a stiffened aluminum plate. The experimental results demonstrate that the method achieves damage localization and enables quantitative damage diagnosis. Full article

In Sweden, steel bridges are the most common solution regarding prefabricated short-span (15–35 m) pedestrian bridges. The most common bridge type for this application is a carbon steel truss bridge with an orthotropic deck consisting of a 10–12 mm deck plate and trapezoidal stiffeners. For these bridges, the deck is the main driver regarding economic and environmental costs, originating from, e.g., high material consumption and maintenance activities. This paper aims to compare the economic aspects between a conventional steel deck and an extruded aluminum deck from an investment cost perspective. The aluminum deck is homogenous, i.e., containing no mechanical connections. To perform this case study, an optimization routine is developed and executed for the aluminum alternative. This optimization study targets the minimum weight and is constrained by the Eurocode design code. A sub-model approach is adopted for the numerical analysis, based on shell and solid elements. The procedure to go from a cross-section defined by a set of parameters to reach the optimized bridge deck is presented. The studies that are reported in this paper show that the developed optimization routine gives satisfactory results. Furthermore, they indicate that homogenous extruded aluminum decks can be a viable deck option for pedestrian bridges. Full article

Currently, the most important structural design aims are weight reduction, corrosion resistance, high stiffness and vibration damping in several industrial applications, which can be provided by the application of advanced fiber-reinforced plastic (FRP) composites. The main research aim was to develop novel and innovative multicellular plate structures that utilize the benefits of lightweight advanced FRP and aluminum materials, as well as to combine the advantageous characteristics of cellular plates and sandwich structures. Two new multicellular plate structures were developed for the structural element of a transport vehicle. The first structure consists of carbon-fiber-reinforced plastic (CFRP) face sheets and pultruded glass-fiber-reinforced plastic (GFRP) stiffeners. The second structure consists of carbon-fiber-reinforced plastic face sheets and aluminum (Al) stiffeners. The second main goal of this research was the development of an optimization method of minimal weight for the newly developed all-FRP structure and the CFRP-Al structure, considering seven design constraints. The third main purpose was to confirm in a real case study that lightweight multicellular composite constructions, optimized by the flexible tolerance optimization method, provide significant weight saving (86%) compared to the all-steel structure. The added value of the research is that optimization methods were developed for the constructed new composite structures, which can be applied in applications where weight saving is the primary aim. Full article

Hyper-velocity impact (HVI) caused by a collision between orbital debris and spacecraft exists widely in outer space, and it poses a threat to spacecraft. This paper proposes a probabilistic hyperbola method based on Lamb waves analysis to detect and locate the impact in stiffened aluminum (Al) plates. A hybrid model using finite element analysis (FEA) and smoothed particle hydrodynamics (SPH) was developed to gain an insight into characteristics of HVI-induced acoustic emission (AE) and shock wave propagation. In addition, an experimental validation was carried out with a two-stage light gas gun, giving an aluminum projectile a velocity of several kilometers per second. Then a quantitative agreement is obtained between numerical and experimental results, demonstrating the correctness of the hybrid model and facilitating the explanation of received AE signals in experiments. Signal analysis shows that the shock wave quickly converts to a Lamb wave as it propagates from the HVI spot, and the zeroth-order symmetric wave mode (S0) dominates wave signal energy. The S0 wave is dispersive and shows a wide frequency range, with dominant magnitudes below 500 kHz. Finally, the HVI experiment results obtained with a light gas gun showed that the average location error could be less than 1 cm with only four sensors for a 1-square-meter stiffened metal plate. Full article

Additive manufacturing processes, such as coreless filament winding with fiber composites or laser powder bed fusion with metals, can produce lightweight structures while exhibiting process-specific characteristics. Those features must be accounted for to successfully combine multiple processes and materials. This hybrid approach can merge the different benefits to realize mass savings in load-bearing structures with high mass-specific stiffnesses, strict geometrical tolerances, and machinability. In this study, a digital tool for coreless filament winding was developed to support all project phases by natively capturing the process-specific characteristics. As a demonstration, an aluminum base plate was stiffened by a coreless wound fiber-composite structure, which was attached by additively manufactured metallic winding pins. The geometrical deviations and surface roughness of the pins were investigated to describe the interface. The concept of multi-stage winding was introduced to reduce fiber–fiber interaction. The demonstration example exhibited an increase in mass-specific component stiffness by a factor of 2.5 with only 1/5 of the mass of a state-of-the-art reference. The hybrid design approach holds great potential to increase performance if process-specific features, interfaces, material interaction, and processes interdependencies are aligned during the digitized design phase. Full article

The aim of this work is to propose a numerical methodology based on the finite element (FE) method to investigate the dispersive behavior of guided waves transmitted, converted, and reflected by reinforced aluminum and composite structures, highlighting their differences. The dispersion curves of such modes can help designers in improving the damage detection sensitivity of Lamb wave based structural health monitoring (SHM) systems. A preliminary phase has been carried out to assess the reliability of the modelling technique. The accuracy of the results has been demonstrated for aluminum and composite flat panels by comparing them against experimental tests and semi-analytical data, respectively. Since the good agreement, the FE method has been used to analyze the phenomena of dispersion, scattering, and mode conversion in aluminum and composite panels characterized by a structural discontinuity, as a stiffener. The research activity allowed emphasizing modes conversion at the stiffener, offering new observations with respect to state of the art. Converted modes propagate with a slightly slower speed than the incident ones. Reflected waves, instead, have been found to travel with the same velocity of the incident ones. Moreover, waves reflected in the composite stiffened plate appeared different from those that occurred in the aluminum one for the aspects herein discussed. Full article

Nowadays, the application of composite materials and light-weight structures is required in those industrial applications where the primary design aims are weight saving, high stiffness, corrosion resistance and vibration damping. The first goal of the study was to construct a new light-weight structure that utilizes the advantageous characteristics of Carbon Fiber Reinforced Plastic (CFRP) and Aluminum (Al) materials; furthermore, the properties of sandwich structures and cellular plates. Thus, the newly constructed structure has CFRP face sheets and Al stiffeners, which was manufactured in order to take experimental measurements. The second aim of the research was the elaboration of calculation methods for the middle deflection of the investigated sandwich-like structure and the stresses that occurred in the structural elements. The calculation methods were elaborated; furthermore, validated by experimental measurements and Finite Element analysis. The third main goal was the elaboration of a mass and cost optimization method for the investigated structure applying the Flexible Tolerance optimization method. During the optimization, seven design constraints were considered: total deflection; buckling of face sheets; web buckling in stiffeners; stress in face sheets; stress in stiffeners; eigenfrequency of the structure and constraints for the design variables. The main added values of the research are the elaboration of the calculation methods relating to the middle deflection and the occurred stresses; furthermore, elaboration of the optimization method. The primary aim of the optimization was the construction of the most light-weighted structure because the new light-weight sandwich-like structure can be utilized in many industrial applications, e.g., elements of vehicles (ship floors, airplane base-plate); transport containers; building constructions (building floors, bridge decks). Full article

In this work, the tensile behavior of a hybrid metallic–composite stiffened panel is investigated. The analyzed structure consists of an omega-reinforced composite fiber-reinforced plastic (CFRP) panel joined with a Z-reinforced aluminum plate by fasteners. The introduced numerical model, able to simulate geometrical and material non-linearities, has been preliminary validated by means of comparisons with experimental test results, in terms of strain distributions in both composite and metallic sub-components. Subsequently, the inter-laminar damage behavior of the investigated hybrid structure has been studied numerically by assessing the influence of key structural subcomponents on the damage evolution of an artificial initial debonding between the composite skin and stringers. Full article