Search Results (673)

Textile production contributes significantly to water pollution, making dye removal crucial for protecting water resources from toxic textile waste. The use of nano-adsorbents for water purification has emerged as a promising approach to removing pollutants from wastewater. Nickel Ferrite (NiFe₂O₄), Iron Oxide (Fe₂O₃), and Nickel Oxide (NiO) nanoparticles (NPs) were prepared via an auto-combustion sol–gel technique using chitosan as a capping and stabilizing agent. The prepared nanomaterials were characterized using various techniques such as XRD, UV-Vis DRS, FT-IR, Raman, EDX, SEM, and TEM to confirm their structure, particle size, morphology, functional groups on the surface, and optical properties. Subsequently, the adsorption of the methylene blue (MB) dye using the prepared nanomaterials was studied. NiFe₂O₄ NPs exhibited the best adsorption behavior compared to the mono-metal oxides. Moreover, all prepared nanomaterials were compatible with the pseudo-second-order model. Further investigations were conducted for NiFe₂O₄ NPs, showing that both the Freundlich and Langmuir isotherm models can explain the adsorption of the MB dye on the surface of NiFe₂O₄ NPs. Factors affecting MB dye adsorption were discussed, such as adsorbent dose, concentration of the MB dye, contact time, pH, and temperature. NiFe₂O₄ NPs exhibited a maximum removal efficiency of the MB dye, reaching 96.8% at pH 8. Different water sources were used to evaluate the ability of NiFe₂O₄ NPs to purify a wide range of water types. Full article

Microalgae are considered to be a dual solution for CO₂ fixation and biogas slurry purification due to their high photosynthetic efficiency and strong environmental adaptability. However, their application is constrained by the low solubility of CO₂ in the solution environment, which restricts microalgal growth, resulting in low biomass production and poor slurry purification efficiency. In this study, we developed MgFe layered double hydroxide (LDH) that spontaneously combined with Chlorella pyrenoidosa to help it concentrate CO₂, thereby increasing biomass yield and purification capacity for food waste biogas slurry. The prepared MgFe-LDH exhibited a typical layered structure with a CO₂ adsorption capacity of 4.44 mmol/g. MgFe-LDH and C. pyrenoidosa carried opposite charges, enabling successful self-assembly via electrostatic interaction. Compared with the control, the addition of 200 ppm MgFe-LDH increased C. pyrenoidosa biomass and pigment content by 36.82% and 63.05%, respectively. The removal efficiencies of total nitrogen, total phosphorus, and ammonia nitrogen in the slurry were enhanced by 20.04%, 31.54% and 14.57%, respectively. The addition of LDH effectively alleviated oxidative stress in C. pyrenoidosa and stimulated the secretion of extracellular polymeric substances, thereby enhancing the stress resistance and pollutant adsorption capabilities. These findings provided a new strategy for the industrial application of microalgal technology in CO₂ fixation and wastewater treatment. Full article

The development of efficient and sustainable advanced oxidation processes (AOPs) for organic pollutant removal is of great significance for water purification. In this study, a CoFeNi-layered double hydroxide (CoFeNi-LDH) catalyst was synthesized and applied for the simultaneous activation of peroxymonosulfate (PMS) and ozone to degrade rhodamine B (RhB) in aqueous solution. The CoFeNi-LDH/PMS/ozone system achieved a remarkable RhB removal efficiency of 95.2 ± 1.2% within 8 min under neutral pH conditions. Systematic parametric studies revealed that synergistic interactions among CoFeNi-LDH, PMS, and ozone contributed to the generation of reactive oxygen species (ROS), primarily sulfate radicals (SO₄^•−) and singlet oxygen (¹O₂), as confirmed by EPR and quenching experiments. Density functional theory (DFT) calculations demonstrated that ozone enhanced PMS adsorption and activation at CoFeNi catalytic sites. The catalyst exhibited robust magnetic recyclability and structural stability after repeated use. This work highlights a synergistic catalytic strategy for PMS/ozone activation, offering an effective and environmentally friendly platform for dye wastewater remediation. Full article

Microwave-induced oxidation has emerged as an effective approach for water purification. In this study, bismuth ferrite-supporting carbon nanotubes with strong microwave absorption and magnetism were successfully fabricated for the degradation of brilliant green. The reactivity of bismuth ferrite in microwave fields and the role of carbon nanotubes was revealed by systematic characterization methods. Our results demonstrated that the addition of bismuth ferrite in microwave-induced system can enhance the ability of microwave-induced absorption and further induce the degradation and mineralization of brilliant green within 10 min, significantly surpassing conventional heating methods. The brilliant green decomposition by bismuth ferrite in microwave-induced process is a heterogeneous process. Its excellent performance achieved by active species-trap experiments can be attributed to microwave-induced holes. Overall, this study presented a promising material for microwave-induced elimination of brilliant green and other dyes in aqueous media, which can provide the basis for the environmental application of microwave radiation to water purification and wastewater treatment. Full article

Meta-cresol (m-cresol) is highly corrosive and toxic, and is widely present in industrial wastewater. As a pollutant, it adversely affects various aspects of human production and daily life. To evaluate the feasibility of using sunflowers to remediate m-cresol-contaminated wastewater, this study used Helianthus annuus L. as the test subject to analyze its tolerance and the wastewater purification efficiency under different m-cresol concentrations. The results showed that the net photosynthetic rate (P_n), transpiration rate (T_r), stomatal conductance (G_s), and light energy utilization efficiency (LUE) of Helianthus annuus L. exhibited an overall decreasing trend, while the intercellular CO₂ concentration (Cᵢ) initially increased and subsequently decreased with increasing m-cresol concentration. When m-cresol concentration reached or exceeded 60 mg·L⁻¹, the net photosynthetic rate and intercellular CO₂ concentration in the leaves showed opposite trends with further increases in m-cresol stress. The inhibition of net photosynthesis in sunflowers by m-cresol was mainly attributed to non-stomatal factors. The maximum photochemical efficiency (F_v/F_m), actual photochemical efficiency (ΦPSII), photochemical quenching coefficient (q^P), PSII excitation energy partition coefficient (α), and the fraction of absorbed light energy used for photochemistry (P) all decreased with increasing m-cresol concentration. In contrast, non-photochemical quenching (NPQ), the quantum yield of regulated energy dissipation [Y(NPQ)], and the fraction of energy dissipated as heat through the antenna (D) first increased and then decreased. Under low-concentration m-cresol stress, sunflowers protected their photosynthetic system by dissipating excess light energy as heat as a stress response. However, high concentrations of m-cresol caused irreversible damage to Photosystem II (PSII) in sunflowers. Under m-cresol stress, chlorophyll a exhibited strong stability with minimal degradation. As the m-cresol concentration increased from 30 to 180 mg·L⁻¹, the removal rate decreased from 84.91% to 11.84%. In conclusion, sunflowers show good remediation potential for wastewater contaminated with low concentrations of m-cresol and can be used for treating m-cresol wastewater with concentrations ≤ 51.9 mg·L⁻¹. Full article

Polymeric membranes are a highly viable technology for wastewater treatment, water purification, and other filtration operations. Accordingly, flat membranes were developed from extruded nanocomposites of polyamide 6 (PA6) and carbon nanotubes (MWCNT), varying the filler content to 1, 3, and 5 parts per hundred resin (phr). The membranes were produced using the phase inversion process through the immersion–precipitation technique. In total, eight membrane compositions were developed with solvent/polymer ratios of 80/20 (weight %). Calcium chloride (CaCl₂) was used as a pore-forming agent at a content of 10 phr. Thus, the characterizations performed were: solution viscosity, FTIR, contact angle measurement, SEM, AFM, water permeability test, and water vapor permeation test. The results showed that the high viscosity of membranes, excessive gelation time, and higher MWCNT contents contributed to a decrease and/or absence of flow. Through SEM images and water flow measurements, the significant influence of CaCl₂ was observed in modifying the membrane morphology (more interconnected porous structures), ensuring the presence of flow. The AFM images also confirm this phenomenon through the increase in roughness. Water vapor transmission increased with higher MWCNT content. These results demonstrate that PA6 and MWCNT membranes were effective for water filtration, only in those where CaCl₂ was used, and for water vapor initially. Full article

Dye-contaminated wastewater has become one of the most severe environmental challenges due to the non-biodegradability and toxicity of synthetic dyes. While photocatalytic degradation is considered a green and efficient technology for wastewater purification, conventional TiO₂ suffers from limited light utilization and rapid electron–hole recombination. In this exploration, Ag-TiO₂-RGO nanocomposites were successfully fabricated and systematically investigated by XRD, SEM, TEM, XPS, Raman, and PL spectroscopy. The incorporation of Ag nanoparticles and reduced graphene oxide (RGO) synergistically improved charge separation and transfer efficiency. Photocatalytic activity was evaluated using different dyes as pollutants under visible light irradiation. Among the samples, Ag-TiO₂-RGO-3% exhibited the highest RhB degradation efficiency of 99.5% within 75 min, with a rate constant (K) of 0.05420 min⁻¹, which was nearly three times higher than that of pure TiO₂. The photocatalyst also showed excellent reusability with only minor efficiency loss after five cycles, and its activity remained stable across a wide pH range. Radical trapping experiments revealed that •O₂⁻ served as the dominant reactive species, with additional contributions from •OH and photogenerated holes (h⁺). A possible photocatalytic mechanism was proposed, in which Ag nanoparticles and RGO effectively suppressed electron–hole recombination and accelerated the formation of reactive oxygen species for efficient dye mineralization. These findings demonstrate that Ag-TiO₂-RGO-3% is a promising photocatalyst with high activity, stability, and environmental adaptability for wastewater remediation. Full article

The efficient degradation of antibiotics in pharmaceutical wastewater remains a critical challenge against environmental contaminants. Conventional photocatalysts face potential limitations such as narrow visible-light absorption, rapid carrier recombination, and reliance on precious metal cocatalysts. This review investigates the coordination structure of MXene as a cocatalyst to synergistically enhance photocatalytic antibiotic degradation efficiency and the coordination structure modification mechanisms. MXene’s tunable bandgap (0.92–1.75 eV), exceptional conductivity (100–20,000 S/cm), and abundant surface terminations (-O, -OH, -F) enable the construction of Schottky or Z-scheme heterojunctions with semiconductors (Cu₂O, TiO₂, g-C₃N₄), achieving 50–70% efficiency improvement compared to pristine semiconductors. The “electron sponge” effect of MXene suppresses electron-hole recombination by 3–5 times, while its surface functional groups dynamically optimize pollutant adsorption. Notably, MXene’s localized surface plasmon resonance extends light harvesting from visible (400–800 nm) to near-infrared regions (800–2000 nm), tripling photon utilization efficiency. Theoretical simulations demonstrate that d-orbital electronic configurations and terminal groups cooperatively regulate catalytic active sites at atomic scales. The MXene composites demonstrate remarkable environmental stability, maintaining over 90% degradation efficiency of antibiotic under high salinity (2 M NaCl) and broad pH range (4–10). Future research should prioritize green synthesis protocols and mechanistic investigations of interfacial dynamics in multicomponent wastewater systems to facilitate engineering applications. This work provides fundamental insights into designing MXene-based photocatalysts for sustainable water purification. Full article

This literature review highlights the latest advances in the use of adsorption materials based on modified chitosan for the purification of aqueous solutions from pharmaceutical residues. Some countries are actively working to detect pharmaceuticals and their metabolites in water samples from natural sources and municipal wastewater, as well as to study their impact on the environment. In this article, adsorbents based on chitosan, a natural, low toxic and biodegradable polymer, are considered as a promising solution to this problem. Due to some disadvantages of pure chitosan (low mechanical strength, small specific surface area), its practical application is limited. One of the ways to overcome them is to create modified materials, such as grafted copolymers, as well as chitosan derivatives and its composites, including those with magnetic nanoparticles and carbon materials. Modification of chitosan makes it possible to achieve an increase in mechanical strength, specific surface area and porosity. The high efficiency of hybrid adsorbents is emphasised, demonstrating high adsorption capacity, reuse ability and selectivity for a wide range of pharmaceutical preparations, including antibiotics. Thus, despite a number of limitations, chitosan-based materials are a promising solution for deep wastewater treatment. Full article

Pectins are high-value plant cell-wall polysaccharides with extensive applications in the food, pharmaceutical, textile, paper, and environmental sectors. Traditional extraction and processing methodologies rely heavily on harsh acids, high temperatures, and non-renewable solvents, generating substantial environmental and economic costs. This review consolidates recent advances across the entire Bacillus–pectinase value chain, from green pectin extraction and upstream substrate characterization, through process and statistical optimization of enzyme production, to industrial biocatalysis applications. We propose a practical roadmap for developing high-efficiency, low-environmental-footprint enzyme systems that support circular bioeconomy objectives. Critical evaluation of optimization strategies, including submerged versus solid-state fermentation, response surface methodology, artificial neural networks, and design of experiments, is supported by comparative data on strain performance, fermentation parameters, and industrial titers. Sector-specific case studies demonstrate the efficacy of Bacillus pectinases in fruit-juice clarification, textile bio-scouring, paper bio-bleaching, bio-based detergents, coffee and tea processing, oil extraction, animal feed enhancement, wastewater treatment, and plant-virus purification. Remaining challenges, including enzyme stability in complex matrices, techno-economic scale-up, and structure-guided protein engineering, are identified. Future directions are charted toward CRISPR-driven enzyme design and fully integrated circular-economy bioprocessing platforms. Full article

The increasing global demand for sustainable water management in coal-fired power plants highlights the critical challenges of high-salinity wastewater treatment, where electrodialysis technology emerges as a promising technology for salinity removal. This paper systematically investigates the application status, technical principles, advantages, and challenges of electrodialysis (ED) in clean water treatment for coal-fired power plants, and its future development potential is also discussed. As an efficient membrane-based desalination technology, ED could effectively remove chloride ions, sulfate ions, and other dissolved salts from clean water, significantly reducing conductivity and enabling both water reuse and salt recovery. Studies indicate that through optimized operational parameters and system design, ED systems can achieve over 90% desalination efficiency and concentrate salts to levels exceeding 12%, delivering notable economic and environmental benefits. However, practical implementation still faces challenges such as membrane fouling and high energy consumption. Advances in novel membrane materials, system integration, and intelligent control technologies are expected to broaden ED’s applicability in power plant water treatment. This study serves as a valuable technical reference for advancing clean water purification and resource recovery in the energy sector, and the findings will contribute to informed decision-making for sustainable water treatment solutions. Full article

Clean water and uncontaminated soil are fundamental for sustaining life on Earth and are essential for assuring human health, and the use of sustainable adsorption materials has emerged as an effective strategy to reduce the volume of effluents released into the environment. Cellulose–bentonite composites have shown significant promise in water purification due to their high adsorption capacity, structural stability, and eco-friendly nature, making them an effective material for the removal of a wide range of pollutants from contaminated water. The most commonly employed methods of fabrication of cellulose–bentonite composites include solution casting, in situ polymerization, and electrospinning. Wastewater typically contains a variety of toxic contaminants, including synthetic dyes such as Congo red and methylene blue, heavy metals such as Cu, Pb, Hg, Ni, pesticides, and oils. Cellulose–bentonite composites offer an economical and efficient solution for the removal of these pollutants, owing to their synergistic properties—especially when compared to other adsorbents such as activated carbon, nanographene oxide, and metal–organic frameworks (MOFs). However, a systematic evaluation of their fabrication strategies, adsorption mechanisms, and application-related studies remains lacking. Also, there is an urgent need for a comprehensive review that consolidates recent findings on the removal of environmental contaminants and highlights both individual and combined adsorption efficiencies. Therefore, this work focuses on cellulose–bentonite composites as highly promising materials for developing sustainable, high-performance adsorbents tailored for advanced water treatment technologies. Full article

Floating treatment wetlands (FTWs) are engineered systems that utilize floating platforms planted with aquatic vegetation to treat polluted water such as stormwater, agricultural runoff, and wastewater. FTWs have emerged as promising and environmentally sustainable solutions for water purification. This review synthesizes the current knowledge on FTW design, plant selection, and performance evaluation. It highlights key factors influencing nutrient and heavy metal removal, including the hydraulic retention time, mat thickness, and types of plant species. Recent findings on the roles of root architecture, microbial interactions, and seasonal variability in treatment efficiency are also discussed. Additionally, the review explores advanced analytical methods for monitoring water quality and assessing plant growth and contaminant uptake. Case studies from both laboratory- and field-scale experiments illustrate how variation in FTW configurations impacts pollutant removal efficiency. The review concludes by identifying critical research gaps, including the need for standardized monitoring protocols, strategies to enhance long-term performance, and the integration of FTWs with complementary treatment technologies to improve effectiveness across diverse aquatic environments. Full article

Oily wastewater is a critical environmental concern, and the high costs and fouling of conventional membranes drive the search for low-cost, efficient alternatives. This study evaluates surface-modified quartz particles for oil–water separation, focusing on hydrophilic and hydrophobic coatings. Quartz samples underwent washing, hydrophobic coating, and hydrophilic coating, with morphological and elemental changes assessed using scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM–EDS). Oil and grease (O&G) content was determined via the EPA 1664 method under high-solids conditions. The untreated oil–water mixture contained 142,955.9 mg/L O&G. Hydrophilic-coated quartz achieved the greatest reduction, producing water with only 751.3 mg/L O&G, indicating excellent oil rejection and water selectivity. Washed quartz performed similarly at 837.1 mg/L. Hydrophobic-coated quartz, while yielding higher residual oil in water (64,198.9 mg/L), demonstrated strong oil affinity, making it more suitable for oil recovery applications. Raw quartz, tested without heavy oil loading, showed a baseline of 13.4 mg/L. These results confirm that surface engineering of quartz enables tunable separation properties, where hydrophilic surfaces favor water purification and hydrophobic surfaces enhance oil capture. The findings provide a pathway for scalable, cost-effective, and application-specific oily wastewater treatment solutions. Full article

As the demand for clean water continues to rise, the development of reliable and environmentally sustainable purification methods has become increasingly important. In this study, we describe the production and characterization of electrospun polyimide (PID) nanofibers modified with MXene (Ti₃C₂Tx), tungsten trioxide (WO₃), and titanium dioxide (TiO₂) nanomaterials for improved photocatalytic degradation of rhodamine 6G (R6G), a model organic dye. Superior photocatalytic performance was achieved by suppressing electron–hole recombination, promoting efficient charge carrier separation, and the significant increase in light absorption through the addition of metal oxide nanowires and MXene to the PID matrix. Comprehensive characterization confirms a core–shell nanofiber architecture with TiO₂, WO₃, and MXene effectively integrated and electronically coupled, consistent with the observed photocatalytic response. The PID/TiO₂/WO₃/MXene composite exhibited the highest photocatalytic activity among the tested configurations, degrading R6G by 74% in 90 min of light exposure. This enhancement was ascribed to the synergistic interactions between MXene and the metal oxides, which reduced recombination losses and promoted effective charge transfer. The study confirms the suitability of PID-based hybrid nanofibers for wastewater treatment applications. It also points toward future directions focused on scalable production and deployment in the field of environmental remediation. Full article