Search Results (33)

Externally governed hydrogel swelling is a highly convenient yet inherently challenging process, as it requires both responsive materials and appropriately tuned external stimuli. In this work, for the first time, the influence of simultaneous action of external physical fields—ultrasound (US) and microwave heating (MW), combined with cooling—on the isothermal swelling kinetics of poly(methacrylic acid) (PMAA) hydrogel was investigated and compared with swelling under conventional thermal heating (TH) under isothermal conditions. Swelling kinetics were monitored over a temperature range of 248–318 K, under simultaneous cooling with either US, MW, or TH. The well-established Peppas model was used to determine swelling kinetics parameters, revealing a significant acceleration in the swelling process under MW (up to 48.8 times at 313 K), as well as different water penetrating mechanisms (non-Fickian diffusion) compared to TH and US (Super-case II). Additionally, it was demonstrated that the swelling conversion curves could be mathematically described using a “shrinking boundary surfaces” model. Isothermal swelling constants and the corresponding kinetic parameters (activation energy E_a and pre-exponential factor ln A) were calculated. The results confirmed that external physical fields significantly influence the thermal activation and swelling behavior of PMAA xerogels, offering insight into field-responsive transport processes in hydrogel networks. Full article

This short review provides a focused overview of recent advances in catalytic systems for water purification, with particular attention to photocatalysis, Fenton-like processes, and biocatalysis. While not intended as a comprehensive survey, this review is grounded primarily in recent work from our research group, supported by comparisons with relevant studies from the broader literature. Emphasis is placed on the role of graphene-based materials, particularly aerogels, hydrogels, and xerogels, as functional platforms for catalytic nanoparticles inclusion and enzyme immobilization. This review aims to highlight key insights, practical limitations, and emerging strategies to improve catalyst reusability, stability, and scalability for real-world water treatment applications. Full article

Efficient electrocatalysts for the oxygen reduction reaction (ORR) are essential for numerous energy storage and conversion systems, including zinc–air batteries and fuel cells. Cutting-edge Pt/C catalysts remain the most efficient ORR catalysts to date; however, their high cost and inadequate stability impede their use in commercial devices. Recently, transition metal-based electrocatalysts are being pursued as ideal alternatives for cost-effective and efficient materials with a promising future. This review provides an in-depth analysis of the principles, synthesis, and electrocatalytic assessment of noble metal and transition metal-based catalysts derived from diverse gel precursors, including hydrogels, aerogels, xerogels, metal–organic gels, and metal aerogels. Electrocatalysts derived from gel precursors have garnered significant interest due to their superior physicochemical properties, including an exceptionally high surface area, adjustable porosity, adaptability, and scalability. Catalysts obtained from gel precursors offer numerous advantages over conventional catalyst synthesis methods, including the complete utilization of precursors, precise control over surface area and porosity, and uniform distribution of ORR active sites. Among the various types, metal aerogels are distinguished as the superior catalysts, exceeding the Department of Energy’s (DoE) 2025 targets for the mass and specific activities of ORR catalysts. In contrast, hydrogel- and aerogel-derived catalysts excel in terms of ORR activity, specific surface area, and the potential to incorporate high loadings of single-atom catalysts composed of transition metals. Ultimately, we unequivocally categorized the electrocatalysts into high-, moderate-, and low-performance tiers, identifying the most promising catalyst candidate within each gel classification. Concluding insights, future outlooks, and recommendations were provided for the advancement of cost-effective, scalable electrocatalysts derived from gels for fuel cells and zinc–air batteries. Full article

Silica fillers have been a cornerstone in chemical technology due to their versatility, availability, and ease of integration into various formulations. Recent advancements, including chlorine-free synthesis of alkoxysilanes, have paved the way for alternative materials like polymethylsilsesquioxane (PMSSO). This study explores the structural evolution and properties of a hydrophobic PMSSO xerogel, synthesized through hydrolytic polycondensation of methyltriethoxysilane (MTEOS). PMSSO exhibits exceptional hydrophobicity, high specific surface area, and compatibility with polymer matrices, making it a promising filler for applications in rubber products, lubricants, and cosmetics. We developed a straightforward synthesis method for producing PMSSO xerogel that avoids toxic solvents and organochlorosilanes, ensuring safety and sustainability. The reaction conditions, particularly the amount of alkali and neutralization parameters, were found to significantly influence the properties of the final xerogels, such as specific surface area. Optimization of the synthesis parameters allow for obtaining PMSSO xerogels with a specific surface area about 600 m²/g. These findings underscore PMSSO’s potential as a versatile, eco-friendly alternative to conventional silica fillers, offering tailored properties for diverse industrial applications. Full article

Photocatalysis has attracted more and more attention as a possible solution to environmental, water, and energy crises. Although some photocatalytic materials have already proven to perform well, there are still some problems that should be solved for the broad commercialization of photocatalysis-based technologies. Among them, cheap and easy recycling, as well as stability issues, should be addressed. Accordingly, the application of gels, either as a photocatalytic material or as its support, might be a good solution. In this review, various propositions of gel-based photocatalysts have been presented and discussed. Moreover, an easy nanoarchitecture design of gel-based structures enables fundamental studies, e.g., on mechanism clarifications. It might be concluded that gels with their unique properties, i.e., low density, high specific surface area, great porosity, and low-cost preparation, are highly prospective for solar-energy-based reactions, water treatment, photodynamic cancer therapies, and fundamental research. Full article

Chitosan, alginate, and chitosan–alginate (50:50) mixed hydrogels were prepared by freeze casting, freeze-drying, and subsequent physical cross-linking. Chitosan was cross-linked with citrate and alginate with calcium ions, while the mixed gels were cross-linked with both cross-linking agents. Both cryogels and xerogels were obtained by lyophilization and drying of the hydrogels. We investigated the effect of the chemical composition and the physical state of gels on the gel structure and sorption of model dyes. Alginate and mixed gels cross-linked with Ca²⁺ ions sorbed 80–95% of cationic dye from the solutions. The chitosan gels are primarily capable of adsorbing anionic dyes, but at near-neutral pH, their capacity is lower than that of alginate gels, showing 50–60% dye sorption. In the case of alginate gels, the dye sorption capacity of xerogels, cryogels, and hydrogels was the same, but for chitosan gels, the hydrogels adsorbed slightly less dye than the dried gels. Full article

The technology of obtaining porous nanostructures is based on ecological organosilicon materials and their uses in some spheres of human life, for example, for medical preparations, for thermal insulation of building structures and industrial equipment, and for cleaning. The purpose of this study was to establish correlations between various experimental parameters (shear stress, speed pulsations, temperature, viscosity, and processing time) and the rheological characteristics of suspensions obtained by the method of liquid-phase dispersion; it was a study of hydrodynamic effects and the processes of heat and mass exchange in liquid systems during the liquid-phase dispersion of hydrogel monoliths by means of discrete-pulse activation in a special rotary apparatus. The dehydration of hydrogels was carried out by two methods: convective drying in a layer and spraying in the coolant flow. Experiments have shown that the key parameters for obtaining stable homogeneous suspensions are a synergistic combination of concentration factors and processing time. To obtain adsorbents in the form of pastes with specified adsorption properties and a monolith size of up to 300 μm, the optimal parameters were a hydrogel concentration of 70% and a processing time in the double-recirculation mode. Xerogels obtained by convective drying are a polydisperse mixture of strong monoliths and fragile aggregates. In contrast, xerogel monoliths obtained by spray drying show great homogeneity in terms of dispersion and strength characteristics. The rheological parameters of the hydrogel dispersions, which depend on the concentration and hydrodynamic treatment modes, are the dominant factors affecting the moisture extraction during drying. This study marks the first investigation into the resilience of porous organosilicon structures against the influence of intense turbulence fields and mechanical stresses experienced within the rotor apparatus during suspension production. Full article

During the last decades, salicylic acid (SA) and hyaluronic acid (HA) have been studied for a wide range of cosmetic and pharmaceutical applications. The current study investigated the drug loading potential of SA in HA-based crosslinked hydrogel films using a post-loading (osmosis) method of the unmedicated xerogels from saturated aqueous solutions of salicylic acid over a range of pH values. The films were characterized with Fourier-transform infra-red spectroscopy (FT-IR) and ultraviolet-visible (UV-Vis) spectrophotometry in order to elucidate the drug loading profile and the films’ integrity during the loading process. Additional studies on their weight loss (%), gel fraction (%), thickness increase (%) and swelling (%) were performed. Overall, the studies showed significant film disintegration at highly acidic and basic solutions. No drug loading occurred at neutral and basic pH, possibly due to the anionic repulsion between SA and HA, whereas at, pH 2.1, the drug loading was promising and could be detected via UV-Vis analysis of the medicated solutions, with the SA concentration in the xerogel films at 28% w/w. Full article

The present study reported the obtention of xerogels based on chitosan and citral and their use as materials for mercury ion recovery from aqueous solutions, this being a serious problem related to the environment. The systems were prepared by the acid condensation of chitosan with citral, followed by the lyophilization of the resulting hydrogels, in order to obtain highly porous solid materials. The structural, morphological and supramolecular characterization of the systems was performed using ¹H-NMR and FTIR spectroscopy, scanning electron microscopy and wide-angle X-ray diffraction. The ability of the obtained materials to be used for the recovery of mercury from aqueous solutions revealed the high potential of the xerogels to be used in this sense, the analysis of the materials post mercury absorption experiments revealing that this ability is predominantly conferred by the imine linkages which act as coordinating moieties for mercury ions. Full article

Pectin hydrogels have garnered significant attention in the food industry due to their remarkable versatility and promising properties. As a naturally occurring polysaccharide, pectin forms three-dimensional (3D) hydrophilic polymer networks, endowing these hydrogels with softness, flexibility, and biocompatibility. Their exceptional attributes surpass those of other biopolymer gels, exhibiting rapid gelation, higher melting points, and efficient carrier capabilities for flavoring and fat barriers. This review provides an overview of the current state of pectin gelling mechanisms and the classification of hydrogels, as well as their crosslinking types, as investigated through diverse research endeavors worldwide. The preparation of pectin hydrogels is categorized into specific gel types, including hydrogels, cryogels, aerogels, xerogels, and oleogels. Each preparation process is thoroughly discussed, shedding light on how it impacts the properties of pectin gels. Furthermore, the review delves into the various crosslinking methods used to form hydrogels, with a focus on physical, chemical, and interpenetrating polymer network (IPN) approaches. Understanding these crosslinking mechanisms is crucial to harnessing the full potential of pectin hydrogels for food-related applications. The review aims to provide valuable insights into the diverse applications of pectin hydrogels in the food industry, motivating further exploration to cater to consumer demands and advance food technology. By exploiting the unique properties of pectin hydrogels, food formulations can be enhanced with encapsulated bioactive substances, improved stability, and controlled release. Additionally, the exploration of different crosslinking methods expands the horizons of potential applications. Full article

In this investigation, purified attapulgite (ATT) and polyvinyl alcohol (PVA) were utilized to fabricate nanocomposite hydrogels and a xerogel, with a focus on studying the impact of minor additions of ATT on the properties of the PVA nanocomposite hydrogels and xerogel. The findings demonstrated that at a concentration of 0.75% ATT, the water content and gel fraction of the PVA nanocomposite hydrogel reached their peak. Conversely, the nanocomposite xerogel with 0.75% ATT reduced its swelling and porosity to the minimum. SEM and EDS analyses revealed that when the ATT concentration was at or below 0.5%, nano-sized ATT could be evenly distributed in the PVA nanocomposite xerogel. However, when the concentration of ATT rose to 0.75% or higher, the ATT began to aggregate, resulting in a decrease in porous structure and the disruption of certain 3D porous continuous structures. The XRD analysis further affirmed that at an ATT concentration of 0.75% or higher, a distinct ATT peak emerged in the PVA nanocomposite xerogel. It was observed that as the content of ATT increased, the concavity and convexity of the xerogel surface, as well as the surface roughness, decreased. The results also confirmed that the ATT was evenly distributed in the PVA, and a combination of hydrogen bonds and ether bonds resulted in a more stable gel structure. The tensile properties exhibited that when compared with pure PVA hydrogel, the maximum tensile strength and elongation at break were achieved at an ATT concentration of 0.5%, indicating increases of 23.0% and 11.8%, respectively. The FTIR analysis results showed that the ATT and PVA could generate an ether bond, further confirming that ATT could enhance the PVA properties. The TGA analysis showed that the thermal degradation temperature peaked when the ATT concentration was at 0.5%, providing further evidence that the compactness of the nanocomposite hydrogel and the dispersion of the nanofiller was superior, contributing to a substantial increase in the mechanical properties of the nanocomposite hydrogel. Finally, the dye adsorption results displayed a significant rise in dye removal efficiency for methylene blue with the increase in the ATT concentration. At an ATT concentration of 1%, the removal efficiency rose by 103% compared with that of the pure PVA xerogel. Full article

Transport properties are one of the most crucial assets of hydrogel samples, influencing their main application potential, i.e., as drug carriers. Depending on the type of drug or the application itself, it is very important to be able to control these transport properties in an appropriate manner. This study seeks to modify these properties by adding amphiphiles, specifically lecithin. Through its self-assembly, lecithin modifies the inner structure of the hydrogel, which affects its properties, especially the transport ones. In the proposed paper, these properties are studied mainly using various probes (organic dyes) to effectively simulate drugs in simple release diffusion experiments controlled by UV-Vis spectrophotometry. Scanning electron microscopy was used to help characterize the diffusion systems. The effects of lecithin and its concentrations, as well as the effects of variously charged model drugs, were discussed. Lecithin decreases the values of the diffusion coefficient independently of the dye used and the type of crosslinking. The ability to influence transport properties is better observed in xerogel samples. The results, complementing previously published conclusions, showed that lecithin can alter a hydrogel’s structure and therefore its transport properties. Full article

This work describes the development and characterization of fluorescent nanocomposite hydrogels, with high swelling and absorption capacity, and prepared using a green protocol. These fluorescent materials are obtained by incorporating, for the first time, polyfluorenes-based nanoparticles with different emission bands—poly[9,9-dioctylfluorenyl-2,7-diyl] (PFO) and poly[(9,9-di-n-octylfluorenyl-2,7-diyl)-alt-(1,4-benzo-{2,1,3}-thiadiazole)] (F8BT)—into a three-dimensional polymeric network based on polyacrylamide. To this end, two strategies were explored: incorporation of the nanoparticles during the polymerization process (in situ) and embedment after the hydrogel formation (ex situ). The results show that the combination of PFO nanoparticles introduced by the ex situ method provided materials with good storage stability, homogeneity and reproducibility properties, allowing their preservation in the form of xerogel. The fluorescent nanocomposite hydrogels have been tested as a transportable and user-friendly sensing platform. In particular, the ability of these materials to specifically detect the enzyme alkaline phosphatase (ALP) has been evaluated as a proof-of-concept. The sensor was able to quantify the presence of the enzyme in an aqueous sample with a response time of 10 min and LOD of 21 nM. Given these results, we consider that this device shows great potential for quantifying physiological ALP levels as well as enzyme activity in environmental samples. Full article

Composite hydrogels samples consisting of poly(methyl methacrylate/butyl acrylate/2-hydroxyethylmethacrylate) (poly-OH) and up to 60% reduced graphene oxide (rGO) containing rGO were synthesized. The method of coupled thermally induced self-assembly of graphene oxide (GO) platelets within a polymer matrix and in situ chemical reduction of GO was applied. The synthesized hydrogels were dried using the ambient pressure drying (APD) and freeze-drying (FD) methods. The effects of the weight fraction of rGO in the composites and the drying method on the textural, morphological, thermal, and rheological properties were examined for the dried samples. The obtained results indicate that APD leads to the formation of non-porous xerogels (X) of high bulk density (D), while FD results in the formation of highly porous aerogels (A) with low D. An increase in the weight fraction of rGO in the composite xerogels leads to an increase in D, specific surface area (SA), pore volume (Vp), average pore diameter (dp), and porosity (P). With an increase in the weight fraction of rGO in A-composites, the D values increase while the values of SP, Vp, dp, and P decrease. Thermo-degradation (TD) of both X and A composites takes place through three distinct steps: dehydration, decomposition of residual oxygen functional group, and polymer chain degradation. The thermal stabilities (TS) of the X-composites and X-rGO are higher than those of the A-composites and A-rGO. The values of the storage modulus (E’) and the loss modulus (E”) of the A-composites increase with the increase in their weight fraction of rGO. Full article

Here, we present a study on the incorporation and characterization of the enzyme alkaline phosphatase (ALP) into a three-dimensional polymeric network through a green protocol to obtain transparent hydrogels (ALP@AETA) that can be stored at room temperature and potentially used as a disposable biosensor platform for the rapid detection of ALP inhibitors. For this purpose, different strategies for the immobilization of ALP in the hydrogel were examined and the properties of the new material, compared to the hydrogel in the absence of enzyme, were studied. The conformation and stability of the immobilized enzyme were characterized by monitoring the changes in its intrinsic fluorescence as a function of temperature, in order to study the unfolding/folding process inside the hydrogel, inherently related to the enzyme activity. The results show that the immobilized enzyme retains its activity, slightly increases its thermal stability and can be stored as a xerogel at room temperature without losing its properties. A small portion of a few millimeters of ALP@AETA xerogel was sufficient to perform enzymatic activity inhibition assays, so as a proof of concept, the device was tested as a portable optical biosensor for the detection of phosphate in water with satisfactory results. Given the good stability of the ALP@AETA xerogel and the interesting applications of ALP, not only in the environmental field but also as a therapeutic enzyme, we believe that this study could be of great use for the development of new devices for sensing and protein delivery. Full article