Sustainability, Volume 15, Issue 6 (March-2 2023) – 916 articles

Environmental identities and attitude towards oil pipeline vandalism in Niger Delta oil-producing communities were examined to show whether low environmental identity is associated with an environmentally destructive attitude, as well as how such issues may be connected with incidents of oil pipeline vandalism in the area. A survey of youths (N = 603) from selected oil-producing communities in the Niger Delta area was conducted. A subset of the sample participated in focus group discussions, and ten experts were interviewed. Socioeconomic and demographic factors of participants were also investigated, as they might be associated with environmental identities and attitudes. The study found that the youths who scored medium to high on the environmental identity scale are more likely to be pro-environmental. There was also a significant association between gender and environmental identity scores. Occupation, education, and income levels were also associated with attitude towards oil pipeline vandalism. However, there was no significant association between environmental identity and attitude towards oil pipeline vandalism. The strong associations between socioeconomic factors, environmental identity, and attitude towards pipeline vandalism suggest that improved socioeconomic status may help to curb oil pipeline vandalism in the Niger Delta. Full article

Considering that the amount of waste generated by an industrial enterprise is affected by many uncertain factors, such as the quality of raw materials and the state of equipment. The process is not deterministic, as assumed in most existing studies. In this paper, we propose a stochastic impulse control model to characterize the process of pollution control. The Quasi-Variational Inequality (QVI) method is implemented to solve the optimization problem. Our results show that the optimal control strategy for an industrial enterprise is to perform at a fixed intensity when the pollution reaches the threshold level. In addition, sensitivity analysis of parameters is implemented to illustrate the impact of higher growth rates and volatility on the optimal control strategy. The paper provides a decision basis for industrial enterprises to do pollution control efficiently. Full article

The paper proposes an approach to the integrated assessment of the social responsibility of EU countries with a combination of data from three international indices most relevant to the monitoring of social responsibility at the macroeconomic level: the Global Sustainable Competitiveness Index, the Sustainable Development Goals Index and the Social Progress Index. Applying the method of taxonomic analysis on the example of index values for EU countries, we assessed the differences and leaders in ensuring social responsibility. The authors do not consider country-level social responsibility only as a consequence of the development of responsible practices at all levels. Taking into account that social responsibility should be a prerequisite for expanding opportunities in all spheres, in particular, in business, the authors conducted a correlational analysis of the relationship between the taxonomic indicator of social responsibility and the development of innovative business. As a result, we confirmed significant connections with “Business sophistication” indicators (as part of the Global Innovation Index) and the share of innovative firms of total SMEs (according to OESD statistics). The obtained results strengthen the grounds for considering social responsibility not only as an important socially oriented concept, but also as a reliable basis for the development of innovative business due to the created comfortable institutional environment of business development. Full article

It is generally believed that stable airflow can effectively reduce tip burn, a common lettuce plant disease in closed plant factories that severely restricts the sustainable development of these factories. This study aims to achieve stable airflow in the cultivator by zoning the seedling and growth stage crops and installing differential fans, while ensuring comprehensive quality. In this study, a three-dimensional simulation plant factory model was created to simulate the airflow inside the cultivator, taking crop shading and heat dissipation from LED light sources into account. Experiments on photosynthetic physiology and airflow were used to determine environmental thresholds for crop growth, which were then used as CFD boundary conditions. After adopting the optimized cultivation model, the comprehensive quality of lettuce increased by 22.28% during the seedling stage, and the tip burn rate decreased to 26.9%; during the growth stage, the comprehensive quality increased by 25.72%, and the tip burn rate decreased to 23.2%. The zoning optimization cultivation method and differential fan arrangement used in this study to improve the airflow field of plant factories provide new ideas and reliable theoretical support for plant factories to combat lettuce tip burn disease. Full article

Urban resilience strengthens urban sustainability and leads to sustainable solutions in the process of promoting sustainable development. Paying attention to the benefits of urban resilience to strengthen sustainable urban systems is vital to achieve our desired future. This study aims to identify and classify the key indicators of resilience in Tongdejie, a residential area in Guangzhou, China, as well as to examine and compare these indicators with sustainable development indicators. Fuzzy AHP was used to rank the most important indicators in Tongdejie. The results showed that the first three important indicators were economic indicators, and the economic dimension with a weight of 0.41 was higher than the other four indicators. Then, social and cultural indicators took second place with a weight of 0.194, and the management and institutional indicators took third place with a weight of 0.194. Structural–physical and environmental dimensions were ranked fourth and fifth, respectively. From the obtained results and their comparison with the sustainable indicators, in addition to ranking the importance of these indicators and incorporating the research related to urban construction development indicators, it can be concluded that these two concepts have a direct relationship with each other. In order to attain a desired and resilient urban future, it is important to pay attention to the indications and advantages of resilience. This leads to the development and stability of urban systems. Full article

Regarding the problem of the optimal configuration of self-consistent energy systems based on a 100% renewable energy supply for expressway electricity demand in no-grid areas, this paper proposes a multi-objective planning model based on chance-constrained programming (CCP) to achieve the optimization objectives of low cost and high reliability. Firstly, the number of units of different types of wind turbines (WT), the capacity of photovoltaic (PV) cells, and the number of sets of energy storage systems (ESS) are selected for the design variables in our configuration plan. After defining the load grading shedding and ESS scheduling strategy, the Monte Carlo Simulation (MCS) method and the backward reduction method are applied to model the uncertainties of electric load and renewable energy sources. Finally, the set of Pareto solutions are optimized by the non-dominated sorted genetic algorithm-II (NSGA-II) and its unique best solution is determined by the Criteria Importance Though Intercriteria Correlation (CRITIC) and the Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) approach. Making use of the wind speed and solar radiation intensity historical data of an area in northwest China in the last five years, eight case studies of two typical scenarios are designed and carried out to explore in-depth the impact of different confidence levels and load fluctuation ranges on the planning results. The results verify that the proposed method can effectively improve the robustness of the system and satisfy the power demand in confidence scenarios. Full article

Climate change has a profound impact on global biodiversity and species geographical distribution, especially in alpine regions. The prediction of species’ habitat could help the understanding of species’ responses to potential climate threats. Triosteum L. (1753) is a typical mountain plant with medicinal and ecological value. There are three species of this genus in East Asia. Triosteum Pinnatifidum Maxim. 1888 and Triosteum himalayanum Wall. 1829 are mainly distributed in the Qinghai–Tibet Plateau and its surroundings, and they are sensitive to climate changes. In this study, a MaxEnt model was used to predict the potential distribution of T. Pinnatifidum and T. himalayanum in the present time and at four different time periods in the future under two different Shared Socioeconomic Pathways (SSPs). Topographic factors were taken into account in the prediction. In the present study, the accuracy of the model’s prediction was verified (the AUC values are 0.975 and 0.974), and the results indicate that temperature is the key factor that affects the distribution of these two species. Compared with current distribution, the potential suitable area of T. Pinnatifidum will increase in the future under two types of SSPs (an average increase is 31%), but the potential suitable area of T. himalayanum will decrease significantly (the average area is 93% of what it was before). In addition, the overlap of potential suitable areas of these two species will also expand, potentially affecting their hybridization and interspecific competition. The centroids of T. Pinnatifidum will migrate to the east, but the trajectory of centroids of T. himalayanum is complex. This study could provide basic data for the resource utilization and biogeography research of Triosteum. It will also be helpful for conservation and sustainable use of mountain herbaceous plants under climate change. Full article

Attentional neurodiversity is evidenced in the majority of current schools. The role that physical education plays for the inclusion of students with attentional problems in the school is quite relevant. This essay aims to show the effectiveness of sports and physical exercise on the core symptoms of schoolchildren and adolescents with attention deficit/hyperactivity disorder (ADHD). What is more, this proposal sheds light the key differences between clinical conditions of physical exercise and/or sport interventions and the ecological conditions of physical education lessons where the students with attentional problems should be included. Finally, this essay puts forward the real need for bridging the gap between physical education and science by changing the curriculum based programs, re-designing the teachers’ training programs, and acquiring the scientific recommendations in order to ensure the inclusion of all students according to Agenda 2030. Full article

The major focus of this study was determining the effectiveness of new construction specifications regarding the method of cement grout injection for the jet grouting system (high-pressure injection stirring method), with the objective of developing a sustainable ground improvement method. The recent innovative jet grouting techniques allow for improvement at middle pressure, but the mud discharge amount is drastically increased. This produces a serious environmental and financial burden during the disposal of mud discharge. This study attempts to develop a sustainable jet grouting method. The simulation model was prepared by the 3D AutoCAD software, and the analysis was conducted using the moving particle semi-implicit method (MPS method). The study focused on the changes that occurred in the mixing ratio of cement slurry and soil due to the changes made in cement milk spraying during the construction phase and compared it with the traditional method of cement milk spraying. All other construction parameters were kept the same for both cases, and the comparison result shows that the modified construction specification provides a denser and larger improved soil body than the traditional method. Furthermore, the density of the number of particles was determined at the upper, middle, and lower portions of the improved body for comparison. Full article

Granular lateritic soil is commonly used for road construction in humid tropical and subtropical regions. However, the high plastic clay content and poor particle distribution of some laterite materials make them unsuitable for bases and subbases. Lime treatment is a widely used method for improving problematic lateritic soil, and liquid ionic stabilizers are considered an environmentally friendly solution for reinforcing such soils. However, using only lime or only stabilizers may not be optimal. This study investigated the effect of treating granular lateritic soil with hydrated lime and a new liquid stabilizer, Zhonglu-2A (ZL-2A). A series of indoor tests, including compaction, California bearing ratio, and unconfined compressive strength tests, were conducted to evaluate the effects of hydrated lime content and stabilizer content on the mechanical properties, mineralogical composition, and microstructure of the soil. The results show that an increase in hydrated lime dosage increases the optimal moisture content and decreases the maximum dry density. The CBR of lime-stabilizer-treated laterite was at least 2–3 times higher than that of the only-lime-treated soil. The highest CBR was observed in samples treated with 0.2‰ ZL-2A stabilizer. The sample with 6% lime and 0.2‰ ZL-2A stabilizer exhibited the highest unconfined compressive strength, and a nearly linear increase was observed between the unconfined compressive strength and CBR. Further investigation of the stabilization mechanism using X-ray diffraction mineralogy analysis and scanning electron microscopy revealed that the inorganic substances of the ZL-2A stabilizer and the hydrated lime provided the basic conditions for the reaction and generated cementitious hydrates on the clay particles. The mixture of granular lateritic soil and hydrated lime was wrapped by the ZL-2A stabilizer, forming a complex spatial structure and improving the strength of the soil. To improve the bearing capacity of subgrades in actual subgrade engineering, a combination of a liquid ionic stabilizer and lime should be used to treat laterite. Full article

Accelerating the high-quality integrated development of digital economy and marine economy is vital for the development of the marine economy in coastal countries and regions. However, few scholars examined such coordination. Here, based on panel data from 2012 to 2019 and the spatial scale of China’s coastal provinces and cities, the entropy method, coupling harmonious degree model (CCDM), Theil index, and Tobit model were adopted to measure and calculate the interval index differences in the marine economic quality and digital economy level. Exploring the coordination between the marine economy and digital economy, the interval difference index, and the coordination impact factors were also important. First, we found that the quality level of the marine economy and digital economy moved forward in waves and spiraled up, but that the quality of development was relatively low. Second, the coordination between the marine economy and digital economy gradually increased. Third, the coordination gap between the regional marine economy and digital economy was obvious. Fourth, the main factors that affected the coordination between the marine economy and digital economy were the level of digital infrastructure construction, the scale of the marine economy, the level of the marine industry, and industrial digitalization. The results have value for the sustainable development of the marine economy of coastal countries and regions. Full article

The tanning industry is one of the highly polluting sectors, and it is only in the last few years that studies on the energy improvement of tanneries started to proliferate in the literature. Even though the energy cost of a tannery is only a small fraction of the total cost, many tanners became aware of the importance of improving energy efficiency and reducing the environmental footprint to keep the business afloat and be more competitive in the market. This paper presents a study on increasing the sustainability of a tannery located in the region of Catalonia, Spain. Several measures to increase its energy efficiency and reduce its primary energy consumption were proposed and analysed including, among others, the implementation of solar thermal collectors and photovoltaic panels. A cost analysis of the most promising solutions was carried out and discussed. The results show that the tannery should invest between EUR 2 to 2.5 M to obtain the highest energy savings, with an estimated payback period between 5 and 7 years. However, acceptable energy savings can be obtained with a lower investment cost of between EUR 1 to 1.5 M, with a shorter payback period of between 2 and 4 years. Full article

The food supply and the consumption of resources are already central challenges for the growing world population and increasing demands. Urban areas in particular face problems of resilience and sustainability. The development of alternative food systems by, e.g., urban gardening, can contribute to meet targets of sustainable consumption, inclusive economy, and resilient food systems of cities. Our research presents insights into the available harvest of products from allotments. In addition, the interest and motivation of gardeners to distribute products from their allotments was investigated. The analysis was based on a structured and standardized questionnaire with more than 90 allotment gardeners in Leipzig. Data were analyzed by means of descriptive statistics. Our results showed that especially zucchinis, tomatoes, berries, and apples could be distributed to consumers; however, the greatest obstacle involves the legal framework to economically distribute products from these allotments. On the other hand, some respondents showed that income generation from allotment products is less important than the enjoyment of the garden and the charitable goal of action. They suggested an organized distribution system of surplus from allotments to particularly disadvantaged people. This paper encourages re-examination of the conventional urban–rural relations, the production–consumption relationships, and the norms of economic activity. Full article

The growing pressures from the government, buyers, consumers, suppliers, and the general public have recently compelled manufacturing firms to enhance their production methods by becoming more environmentally friendly and pursuing new innovative methods for producing green goods in developing countries. However, the relationship between green supply chain management (GSCM), green human capital (GHC), green innovation (GIN), managerial environmental knowledge (MEK), and firm performance (FPR) has received only a minimal amount of research focus. This study addresses this research gap by providing empirical evidence to motivate firms to implement GSCM, GHC, GIN, and MEK to enhance their FPR in developing countries substantially. A conceptual framework was developed to connect the concepts mentioned above. A questionnaire-based survey was used to collect the data. A total of 736 respondents from manufacturing firms in China were selected. Utilizing structural equation modeling (SEM), the data were analyzed. The findings indicate that neither GHC nor GSCM directly affects FPR; rather, GIN mediates the connection between GHC, GSCM, and FPR. In addition, the findings showed that MEK directly affects FPR and moderates the link between GIN and FPR. This study examined several theoretical and managerial implications and expanded research in the related fields. The results may help practitioners and managers comprehend how GSCM practices impact GIN and FPR. The outcomes of this research will benefit experts, policy makers, and stakeholders who seek to encourage FPR enhancements. Full article

With the arrival of the pandemic, many education students in higher education classrooms saw how their internships were cancelled, making it impossible for them to access real contexts that would let them know how their everyday professional life would be. Consequently, it was necessary to make a methodological change. To bridge the gap between theoretical and practical training, we conducted an educational experience at a private university where several educational videos were used to reflect the implementation of different educational methodologies in teaching mathematics by expert teachers. In the recorded practices, it was shown how four different methodologies were implemented in several contexts during the day-to-day classes: International Baccalaureate (IB), gamification, flipped classroom and project-based learning. We studied each methodology to measure their impact on primary students’ learning and guarantee that higher education students had visualized effective practices through micro-videos. The results of our study show that, in certain aspects of mathematics, the students’ own teaching capabilities have greater influence than the theoretical methodological instruction they generally receive in the classroom. Further, concerning students’ perceptions, we can conclude that their motivation increased towards the use of micro-videos, since they became active agents of their own learning. Full article

Sustainability is a critical issue for businesses today, and corporate boards and nomination committees play a vital role in promoting sustainable practices within organizations. Nomination Committees (NCs) have become important mechanisms for what has been coined as good or sustainable governance. Stakeholders, however, have different opinions on the merits of these committees. Amongst other things, there is disagreement about whom to select for NCs and the criteria for selection. The composition of NCs can influence board nominations and determine whether the necessary knowledge and skills reside within a board to deal with sustainability and good corporate governance. The aim of this research is to provide insights into stakeholders’ perspectives on what matters when profiling nomination committees’ members. The literature on NCs is underdeveloped, and this research importantly addresses the issue by interviewing 13 individuals who are either shareholders, board members of listed companies, or members of NCs. Additionally, a questionnaire was sent to shareholders, board members, and NC members of the 300 largest companies in Iceland. A total of 138 responses were received. The results show that stakeholders believe it is important to decide upon an NC’s composition prior to electing its members. NC members should have either management or board membership experience. Diversity within the committees is also seen to be important, as it can influence diversity and inclusion overall at the board level. These research results provide important insights and understanding for shareholders and boards of directors when composing nomination committees. Full article

The application of recycled aggregates in the asphalt industry has been investigated in recent decades. However, low percentages of these materials have practically been used in asphalt mixtures because of the limitations set by the relevant specifications due to their performance uncertainties. This research investigates the feasibility of increasing the percentage of recycled aggregates to 100% in hot mix asphalt (HMA). Recycled concrete aggregate (RCA), recycled glass (RG), and reclaimed asphalt pavement (RAP) were used to develop HMAs suitable for roads with light to medium traffic. First, potential mix designs were proposed using an innovative approach considering the industry’s needs. Next, the volumetric properties, tensile strength, moisture sensitivity and resilient modulus response of the mixtures under different temperature conditions were determined and compared. In general, the proposed recycled material HMA exhibited superior mechanical and resilient modulus performances, i.e., 45 to 145% increase in stiffness, and up to 99% higher in Marshall stability. Furthermore, higher tensile strength ratios of the recycled material mixtures indicated a greater resistance to water damage, and hence greater durability. The findings of this research provide evidence-based insights into the increased proportion of recycled materials in the construction of asphalt pavements, thereby promoting sustainable pavement construction materials. Full article

To solve the problem of soil degradation in coastal saline–alkali land, three different types of biochar (rice straw biochar, magnetic biochar, and humic acid–magnetic biochar) were prepared to remedy the saline–alkali soil under different mixing ratios. The effects of biochar on the growth of crops in saline–alkali soil were explored through a pot experiment on Chinese cabbage. The experimental results showed that the soil leaching treatment combined with humic acid–magnetic biochar could effectively repair the coastal saline–alkali soil. After adding 5% humic acid–magnetic biochar, the content of soil organic matter was 33.95 g/kg, the water content was 13.85%, and the contents of available phosphorus and available potassium were 9.43 mg/kg and 29.51 mg/kg. After adding 5% humic acid–magnetic biochar, the plant height of Chinese cabbage was 9.16 ± 0.19 cm, and the plant germination rate reached 83.33 ± 5.54%. The incorporation of biochar could effectively increase the chlorophyll content and soluble protein content of pakchoi and reduce the soluble sugar content of pakchoi. The study analyzed the effect of different modified biochar on saline–alkali land restoration and crop growth and explored the action rule of hydrochloric acid magnetic biochar on saline–alkali land restoration, which has important practical value for improving coastal saline–alkali land. Full article

Mangrove ecosystems have high ecological and economic value mainly because of their ability to sequester large amounts of carbon and protect shorelines. Monitoring such ecosystems with earth observation data analytics is necessary to achieve deeper insight and subsequent conservation strategies. The Sundarbans is the world’s largest contiguous mangrove forest, and Sundarbans National Park is a part of this world-famous mangrove forest in India. To examine vegetation change in this region, we used a planetary-scale tool, the Google Earth Engine. A time series of the surface reflectance product of Landsat 8 between 2014 and 2020 was analysed using annual median images. NDVI and dNDVI were derived to monitor vegetation cover change. While we noticed no major changes in the vegetation cover throughout the study area, the coastal regions, especially the southern end, showed significant changes. There were both mangrove vegetation gains due to land accretion and mangrove loss due to erosion and cyclone damage. This study will be useful for long-term monitoring of the imperiled Sundarbans ecosystem to measure any major changes. Full article

The most negative effects caused by earthquakes are the damage and collapse of buildings. Seismic building retrofitting and repair can effectively reduce the negative impact on post-earthquake buildings. The priority to repair the construction after being damaged by an earthquake is to perform an assessment of seismic buildings. The traditional damage assessment method is mainly based on visual inspection, which is highly subjective and has low efficiency. To improve the intelligence of damage assessments for post-earthquake buildings, this paper proposed an assessment method using CV (Computer Vision) and AR (Augmented Reality). Firstly, this paper proposed a fusion mechanism for the CV and AR of the assessment method. Secondly, the CNN (Convolutional Neural Network) algorithm and gray value theory are used to determine the damage information of post-earthquake buildings. Then, the damage assessment can be visually displayed according to the damage information. Finally, this paper used a damage assessment case of seismic-reinforced concrete frame beams to verify the feasibility and effectiveness of the proposed assessment method. Full article

The focus of this study is buildings for public purposes, specifically for higher education, planned in zones of spatial cultural-historical units. Sustainable urban planning in areas with cultural-historical heritage is a particular challenge since the higher education facilities themselves have their own functional requirements, which are much easier to fulfill in “softer” locations. The research objective is to prove the hypothesis that it is possible to indicate a prescription for the practical application of the theoretical model and define the necessary steps to achieve the best sustainable quality results in practice. The paper analyses the associated process, relational settings, circumstances, participants, and timelines, and it presents the results of final designs based on two parallel case studies of new capital buildings for the University of Belgrade. Methodologically it gives an overview of the context, referring to other research and examples, detailing chosen case studies, and describing their backgrounds, conditions and requirements, frameworks, chronologies, approaches, and results. The discussion concludes with theoretical models originating from the comparison of implemented steps in the process of creation and evaluation of architectural ideas and summarized similarities and differences, aiming that there is a common model suitable for further applications. The practical result of the research is findings about the pathway for the best original planning solution emphasized through the institution of urban architectural competitions as a mandatory step, recommending wider participation of experts in the process of evaluation. Full article

Bangladesh derives one-half of its agricultural GDP and one-sixth of its national income from paddy. It is crucial to the farmers’ ability to survive. This paper aims to investigate current paddy procurement system and farmer awareness in the Bangladeshi agricultural sector to ensure business sustainability. This paper utilised a quantitative approach to research. The research investigated farmers’ consciousness through perception and contentment. For the measurement, a survey of 210 farmers from three Upazilas was conducted using a closed-ended, pre-tested questionnaire. Version 20 of the SPSS programme was used for data analysis. Approximately 67.6% of respondents were unhappy with the current paddy procurement system, according to the study. Approximately 69.10% of respondents believe there is a middleman in the current paddy procurement system, approximately 94.30% of respondents believe the current system needs improvement, and 99.0% believe a new paddy procurement system could be beneficial. Furthermore, these findings led to the conclusion that there is room for improvement in the current paddy procurement system, which will increase the transparency and sustainability of paddy procurement activities for everyone, including farmers. Full article

Due to the limited and difficult access to sensor energy, energy conservation has always been an important issue in wireless body area network (WBAN). How to make full use of the limited energy of heterogeneous sensors in WBAN to achieve lightweight and high-reliable data transmission has also become key to the sustainable development of telemedicine services. This paper proposes a two-tier cooperation based high-reliable and lightweight forwarding (TTCF) mechanism via minimizing the amount of transmitted data and optimizing forwarding performance, so as to improve the efficiency and reliability of WBAN and reduce system energy consumption. In TTCF, an adaptive semi-tensor product compressed sensing evolution (STPCSE) model is first constructed to minimize the amount of data to be transmitted and extend the lifetime of sensors. Then, the important factors closely related to the energy consumption of human body sensors, including sampling frequency, residual energy and their importance in the network, are analyzed and redefined, and a high-reliable and lightweight forwarding model based on a multi-factor dynamic fusion is built. Finally, the performance and energy-saving effect of TTCF in a dynamic WBAN environment are compared and analyzed. Simulation results show that the system with our TTCF always performs the best in terms of data reconstruct accuracy, cumulative delivery rata, energy consumption and throughput. For example, its cumulative delivery rate is about 12% and 20.8% higher than that of UC-MPRP and CRPBA, and its residual energy and throughput are 1.22 times and 1.41 times, 1.35 times and 1.6 times of the latter two, respectively. Full article

For achieving net-zero emissions by 2050, countries worldwide are committed to setting ambitious carbon reduction targets. In 2022, the officially published report, “Taiwan’s Pathway to Net-Zero Emissions in 2050”, sets out a comprehensive transition plan based on four fundamental strategies: energy, industrial, lifestyle, and social. This transition will likely entail an infrastructure transformation in all sectors of the economy, embracing renewable energy, electricity, and low-carbon fuels. While the Taiwan government is rolling up its sleeves to accelerate the pace of carbon-emission reduction, it is risky to set targets without considering the full implications of net-zero emission and how it will be achieved. This paper provides four insights into Taiwan’s net-zero-emission plan from a perspective of the current understanding of decarbonization and the techniques urgently needed. Although many uncertainties and outstanding questions exist in our net-zero energy systems, and the required granular information for decision makers to track progress has not been clearly identified, this paper points out the characteristics that have been neglected and provides guidance for all stakeholders—governments, businesses, investors, and citizens—to work together on a coordinated plan to tackle climate change. Full article

In this age of global warming, academics and policymakers are increasingly concerned about firm environmental sustainability success. Therefore, this study aims to investigate whether Environmental, Social and Governance (ESG) performance impacts sustainability performance through the mediating effect of firm innovation. To this end, Structural Equation Modeling (SEM) was deployed to analyze data collected from the employees of manufacturing industries in Bangladesh. The results revealed that ESG performance significantly enhances the innovation and sustainability performance of manufacturing industries, indicating that the higher the ESG performance of a firm, the greater its innovation and sustainability performance. Furthermore, the results confirmed that firm innovation performance fully mediates the relationship between ESG initiatives and sustainability performance. The findings of this study provide policymakers and industry authorities with valuable insight into the role of ESG and innovation performance in improving sustainability performance. Specifically, the study sheds knowledge on how firm ESG initiatives and innovation performance impact sustainability performance in the manufacturing sector of an emerging economy such as Bangladesh. Full article

China is the world’s largest producer and consumer of aquatic products. With the rapid economic development of our country and the great improvement of people’s living standards, people have put forward higher requirements for beautiful water ecological environments and high-quality aquaculture products, and promoting aquaculture green development has become an important initiative to promote high-quality sustainable development of aquaculture. Therefore, the assessment and analysis of the current green development level of the aquaculture industry have important practical significance for comprehensively grasping the current green development status of the aquaculture industry in China, purposefully breaking the development bottleneck, and promoting green and sustainable development of the aquaculture industry. This paper obtains comprehensive evaluation results of the green development of aquaculture in China from 2012 to 2021 by constructing a green development index system of aquaculture and applying the entropy method. The results show that the green development level of aquaculture in China has a fluctuating upward trend, with a good development momentum. The production and living standards of fishermen are important aspects that affect its development. In order to further promote the green development of aquaculture in China, countermeasures and suggestions are put forward from the following aspects: improving the green subsidy policy, improving the level of supervision and service, strengthening scientific and technological innovation and the transformation of scientific and technological achievements, and making full use of the unique advantages according to local conditions. Full article

Cost estimates in the early stages of project development are essential for making the right decisions, but they are a huge challenge and risk for owners and potential contractors due to limited information about the characteristics of a future highway project. Whereas previous studies were mainly focused on achieving the highest possible estimation accuracy, this paper aims to propose cost-estimation models that can provide satisfactory accuracy with the least possible effort and to compare the perspectives of owners and contractors as the key stakeholders on projects. To determine cost drivers (CDs) that have a high influence on highway-construction costs and require low effort for their establishment, a questionnaire survey was conducted. Based on the key stakeholders’ perceptions and collected data set, cost-estimation models were developed using multiple-regression analysis, artificial neural networks, and XGBoost. The results show that reasonable cost-estimation accuracy can be achieved with relatively low effort for three CDs for the owners’ perspective and five CDs for the contractors’ perspective. Additional inclusion of input CDs in models does not necessarily imply an increase in accuracy. Also, the questionnaire results show that owners are more concerned about environmental issues, whereas contractors are more concerned about the possible changes in resource prices (especially after recent high increases caused by COVID-19 and the Russia–Ukraine war). These findings can help owners and potential contractors in intelligent decision-making in the early stages of future highway-construction projects. Full article

Due to the rising appeal of travel, as well as the appearance of low-cost carriers that fly to both popular and exotic destinations, people nowadays tend to book their accommodation through the more convenient and flexible sharing economy platforms. The success of such platforms among consumers depends on various factors, such as satisfaction and platform credibility, and on sustainable performance among contributors, increasing their relevance and visibility. This research proposes a conceptual model for measuring the success of sharing economy platforms in tourism, based on added value, unique experience, and enhanced social interactions, together with credibility and sustainable performance. In this vein, the authors conduct an empirical investigation in an emerging market—Romania—where the development of such sharing economy platforms is still in its infancy. Data gathered by the authors by means of a self-developed questionnaire distributed to 500 respondents are modelled via structural equations with SmartPLS. The results indicate that the platform credibility and sustainable performance of sharing economy platforms are key elements in generating their success. The research adds value to the stimulus–organism–response approach, highlighting some insights from a relevant emerging market, which in the future could become a turning point for inbound and outbound tourism. Full article

In an increasingly fast-paced world, emerging mobility demands must be met by competitive services that are in line with the principles of sustainable transportation concepts. It is not possible to know exactly what the mobility solution of the future will be, but it is certain that it will require a reduction in car use. A dramatic increase in energy prices will have an impact on the transportation sector, but making public transportation attractive to large numbers of people could reduce unit costs. Public transportation systems can be made more efficient through flexible transportation concepts and by combining individual passenger demand for travel. In the field of rail passenger transportation, practice uses fixed timetables, which do not take into account the changes in ad hoc travel needs. This results in significant losses due to unjustified unnecessary stops and longer travel times. This article presents an operational concept that enables ad hoc passenger demands to be met. The concept ensures minimum energy consumption and a higher level of passenger demand satisfaction through multilevel demand management. A case study was presented to prove the developed theory. Full article

Energy consumption and environmental issues have become major drivers of increasing renewable energy penetration levels. The electricity generated from renewable energy sources is decentralized throughout distributed generation (DG), which is located at the distribution level. However, the presence of DG can change distribution system characteristics and affect protection systems. Thus, this study aims to investigate the impact of DG in term of its sizing and placement on distribution systems under both normal and fault conditions. In addition, the effects on voltage improvement under normal conditions and current under fault conditions are also considered. The case study system in this study was modelled after an actual section of a 22 kV distribution line from the Provincial Electricity Authority of Thailand using PSCAD software. For DG, wind turbine generation was selected as a renewable energy source. The simulation results demonstrated that the presence of DG has a significant impact on both voltage and current characteristics under both normal and fault conditions. These impacts on the distribution system caused by DG can affect the operation of conventional distribution systems, which require further analysis and preventive measures in order to ensure good system reliability. Full article