Next Article in Journal
Enhancing Wear Resistance of Drilling Motor Components: A Tribological and Materials Application Study
Previous Article in Journal
Adaptive Control of Quadrotors in Uncertain Environments
Previous Article in Special Issue
Amazon Natural Fibers for Application in Engineering Composites and Sustainable Actions: A Review
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Editorial

Special Issue: Feature Papers in Eng 2023

by
Antonio Gil Bravo
INAMAT^2, Science Department, Public University of Navarra, Building Los Acebos, Campus of Arrosadia, E-31006 Pamplona, Spain
Eng 2024, 5(2), 562-565; https://doi.org/10.3390/eng5020031
Submission received: 28 March 2024 / Revised: 29 March 2024 / Accepted: 29 March 2024 / Published: 3 April 2024
(This article belongs to the Special Issue Feature Papers in Eng 2023)

1. Introduction

The aim of this third Eng Special Issue is to collect experimental and theoretical re-search relating to engineering science and technology. The topics included in Eng are as follows: electrical, electronic, and information engineering; chemical and materials engineering; energy engineering; mechanical and automotive engineering; industrial and manufacturing engineering; civil and structural engineering; aerospace engineering; biomedical engineering; geotechnical engineering and engineering geology; and ocean and environmental engineering. Many of these topics have been selected with the idea of contributing to the circular economy and sustainable development. Therefore, these aspects are being addressed from various points of view and have the support of the field of engineering and its applications. The following editorial presents a representative selection of these articles published in our journal in 2023.
Legislative requirements and the principles of the circular economy and sustainable development make waste valorization the best strategy for its management. The biodegradable fraction of industrial waste is a sustainable source of biomass, optimizing its management through energy recovery, reducing the amount of waste to be managed (and its economic costs), minimizing the environmental impact and health risks, and reducing the high dependence on industries on primary sources and fossil fuels [1,2,3,4,5,6,7]. Although traditional sources of biomass, such as wood, crops, agricultural and forestry residues, and food and municipal wastes, are renewable, sustainable, and profitable, they compete with food, and their energy processes release waste into the environment. On the other hand, there is also a non-biodegradable fraction of industrial waste. If its composition is taken into account, in many cases it is considered an inorganic waste. Here, its valorization is not as standardized as the biodegradable fraction, since the energy aspect is rarely taken into account, and it is the possible applications that give rise to the interest in valorizing this material, rather than depositing it in landfills [8].
Other topics discussed in this Special Issue are as follows:
Amazon natural fibers for application in engineering composites and sustainable actions [9,10,11,12].
Rheological behavior of modern cementitious materials [13,14,15].
Vibration monitoring techniques for predictive maintenance of rotating machinery [16,17].
Integrating multi-criteria decision-making methods with sustainable engineering [18,19].
These topics allow for greater discussion among potential readers. For more information, please see the Contributions.

2. Overview of the Published Articles

This Special Issue contains 34 papers, including eight reviews, published by several authors interested in cutting-edge developments in the field of engineering. The authors are from 25 countries, including Australia, Canada, Bosnia and Herzegovina, Brazil, Egypt, France, Germany, Greece, Hong Kong, Hungary, India, Italy, Japan, Mexico, Montenegro, Portugal, Russia, Serbia, Sweden, Taiwan, The Netherlands, United Arab Emirates, United Kingdom, USA, and Yemen.

3. Conclusions

The articles published in this Special Issue present important advancements in the field of this journal. I would like to express my sincere gratitude to all the authors, who have contributed to this Special Issue, and I would also like to thank the managing editors and reviewers who contributed by improving the papers. I hope that the included articles are interesting and inspiring for readers, especially young scholars who are eager to learn about recent advances and contribute future research to the field.

Acknowledgments

The author is grateful for financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through project PID2020-112656RB-C21.

Conflicts of Interest

The author declares no conflicts of interest.

List of Contributions

  • Kara, P.; Ognjanovic, I.; Maindorfer, I.; Mantas, J.; Wippelhauser, A.; Šendelj, R.; Laković, L.; Roganović, M.; Reich, C.; Simon, A.; et al. The Present and Future of a Digital Montenegro: Analysis of C-ITS, Agriculture, and Healthcare. Eng 2023, 4, 341–366. https://doi.org/10.3390/eng4010021.
  • Junio, R.; da Silveira, P.; Neuba, L.; Monteiro, S.; Nascimento, L. Development and Applications of 3D Printing-Processed Auxetic Structures for High-Velocity Impact Protection: A Review. Eng 2023, 4, 903–940. https://doi.org/10.3390/eng4010054.
  • Elshaboury, N.; Mohammed Abdelkader, E.; Al-Sakkaf, A.; Zayed, T. A Critical Review and Bibliometric Analysis on Applications of Ground Penetrating Radar in Science Based on Web of Science Database. Eng 2023, 4, 984–1008. https://doi.org/10.3390/eng4010059.
  • Sharafeldin, M.; Ksaibati, K.; Gerow, K. Frequency Analysis of Equivalent Property-Damage-Only (EPDO) Crashes at Intersections. Eng 2023, 4, 1116–1126. https://doi.org/10.3390/eng4020064.
  • Hasan, A.; Hasan, U.; AlJassmi, H.; Whyte, A. Transit Behaviour and Sociodemographic Interrelation: Enhancing Urban Public-Transport Solutions. Eng 2023, 4, 1144–1155. https://doi.org/10.3390/eng4020066.
  • Comuzzi, L.; Tumedei, M.; Di Pietro, N.; Romasco, T.; Montesani, L.; Piattelli, A.; Covani, U. Are Implant Threads Important for Implant Stability? An In Vitro Study Using Low-Density Polyurethane Sheets. Eng 2023, 4, 1167–1178. https://doi.org/10.3390/eng4020068.
  • Pontarolli, R.; Bigheti, J.; de Sá, L.; Godoy, E. Microservice-Oriented Architecture for Industry 4.0. Eng 2023, 4, 1179–1197. https://doi.org/10.3390/eng4020069.
  • Johnson, J. Rapid Prediction of Leaf Water Content in Eucalypt Leaves Using a Handheld NIRS Instrument. Eng 2023, 4, 1198–1209. https://doi.org/10.3390/eng4020070.
  • Kakinuma, T.; Hisada, M. A Numerical Study on the Response of a Very Large Floating Airport to Airplane Movement. Eng 2023, 4, 1236–1264. https://doi.org/10.3390/eng4020073.
  • Flamarion, M.; Castro, E.; Ribeiro-Jr, R. Pressure Anomalies Beneath Solitary Waves with Constant Vorticity. Eng 2023, 4, 1306–1319. https://doi.org/10.3390/eng4020076.
  • Shyam Kumar, P.; Ramasamy, M.; Varadan, V. A Comparison of Personalized and Generalized LSTM Neural Networks for Deriving VCG from 12-Lead ECG. Eng 2023, 4, 1337–1355. https://doi.org/10.3390/eng4020078.
  • Shan, F.; He, X.; Xu, H.; Armaghani, D.; Sheng, D. Applications of Machine Learning in Mechanised Tunnel Construction: A Systematic Review. Eng 2023, 4, 1516–1535. https://doi.org/10.3390/eng4020087.
  • Štilić, A.; Puška, A. Integrating Multi-Criteria Decision-Making Methods with Sustainable Engineering: A Comprehensive Review of Current Practices. Eng 2023, 4, 1536–1549. https://doi.org/10.3390/eng4020088.
  • Nilimaa, J.; Zhaka, V. An Overview of Smart Materials and Technologies for Concrete Construction in Cold Weather. Eng 2023, 4, 1550–1580. https://doi.org/10.3390/eng4020089.
  • Rosta, S.; Gáspár, L. Skid Resistance of Asphalt Pavements. Eng 2023, 4, 1597–1615. https://doi.org/10.3390/eng4020091.
  • García-Pintos, C.; Aldana-Murillo, N.; Ovalle-Magallanes, E.; Martínez, E. A Deep Learning-Based Visual Map Generation for Mobile Robot Navigation. Eng 2023, 4, 1616–1634. https://doi.org/10.3390/eng4020092.
  • Lee, J.; Tayfur, H.; Hamza, M.; Alzahrani, Y.; Diaconeasa, M. A Limited-Scope Probabilistic Risk Assessment Study to Risk-Inform the Design of a Fuel Storage System for Spent Pebble-Filled Dry Casks. Eng 2023, 4, 1655–1683. https://doi.org/10.3390/eng4020094.
  • Fiorin, F.; Sartori, L.; Méndez, M.; Ferreira, C.; França, M.; Krueger, E. The Learning Curve of People with Complete Spinal Cord Injury Using a NESs-FESs Interface in the Sitting Position: Pilot Study. Eng 2023, 4, 1711–1722. https://doi.org/10.3390/eng4020097.
  • Romanssini, M.; de Aguirre, P.; Compassi-Severo, L.; Girardi, A. A Review on Vibration Monitoring Techniques for Predictive Maintenance of Rotating Machinery. Eng 2023, 4, 1797–1817. https://doi.org/10.3390/eng4030102.
  • El Bitouri, Y. Rheological Behavior of Cement Paste: A Phenomenological State of the Art. Eng 2023, 4, 1891–1904. https://doi.org/10.3390/eng4030107.
  • da Silva, F.; de Castro, P. Redesign of a Failed Hoisting Shaft of a Vertical Transfer Device. Eng 2023, 4, 1981–2002. https://doi.org/10.3390/eng4030112.
  • Hasan, U.; AlJassmi, H.; Hasan, A. Microsimulation Modelling and Scenario Analysis of a Congested Abu Dhabi Highway. Eng 2023, 4, 2003–2014. https://doi.org/10.3390/eng4030113.
  • Chliveros, G.; Kontomaris, S.; Letsios, A. Automatic Identification of Corrosion in Marine Vessels Using Decision-Tree Imaging Hierarchies. Eng 2023, 4, 2090–2099. https://doi.org/10.3390/eng4030118.
  • Sosnin, M.; Berestenko, E.; Mounassar, E.; Shorstkii, I. Cold Plasma Technology for Tomato Processing By-Product Valorization: The Case of Tomato Peeling and Peel Drying. Eng 2023, 4, 2167–2177. https://doi.org/10.3390/eng4030124.
  • Durden, S.; Vilnrotter, V.; Shaffer, S. Assessment of Techniques for Detection of Transient Radio-Frequency Interference (RFI) Signals: A Case Study of a Transient in Radar Test Data. Eng 2023, 4, 2191–2203. https://doi.org/10.3390/eng4030126.
  • Provatidis, C. Power Transmission Using Circular Elements Bounded by Given Central Angle in Rolling Contact. Eng 2023, 4, 2309–2335. https://doi.org/10.3390/eng4030132.
  • Oliveira, C.; Lima, T. Setup Time Reduction of an Automotive Parts Assembly Line Using Lean Tools and Quality Tools. Eng 2023, 4, 2352–2362. https://doi.org/10.3390/eng4030134.
  • Gonzalez, Y.; Prati, R. Comparative Study of Musical Timbral Variations: Crescendo and Vibrato Using FFT-Acoustic Descriptor. Eng 2023, 4, 2468–2482. https://doi.org/10.3390/eng4030140.
  • Schmitz, M.; Menz, F.; Grunau, R.; Mandischer, N.; Hüsing, M.; Corves, B. Robot Cooking—Transferring Observations into a Planning Language: An Automated Approach in the Field of Cooking. Eng 2023, 4, 2514–2524. https://doi.org/10.3390/eng4040143.
  • Franco, B.; Alves Ribeiro, J.; Sánchez-Arce, I. Development of an Airbag Geometry Specific for Autonomous Vehicles. Eng 2023, 4, 2553–2570. https://doi.org/10.3390/eng4040146.
  • Rodrigues, E.; Santos, D.; Buiochi, F. Comparison of Three Linear Digital Filters Applied to Improve the Quality of the Measured Acoustic Field. Eng 2023, 4, 2582–2600. https://doi.org/10.3390/eng4040148.
  • Koury Costa, G. Modelling Air Flow through Pneumatic Valves: A Brief Review with an Experimental Case Study. Eng 2023, 4, 2601–2614. https://doi.org/10.3390/eng4040149.
  • Patle, B.; Patel, B.; Jha, A.; Kashyap, S. Self-Directed Mobile Robot Navigation Based on Functional Firefly Algorithm (FFA). Eng 2023, 4, 2656–2681. https://doi.org/10.3390/eng4040152.
  • da Silveira, P.; Cardoso, B.; Marchi, B.; Monteiro, S. Amazon Natural Fibers for Application in Engineering Composites and Sustainable Actions: A Review. Eng 2024, 5, 133–179. https://doi.org/10.3390/eng5010009.

References

  1. Castaldi, M.M.; van Deventer, J.; Lavoie, J.M.; Legrand, J.; Nzihou, A.; Pontikes, Y.; Py, X.; Vandecasteele, C.; Vasudevan, P.T.; Verstraete, W. Progress and Prospects in the Field of Biomass and Waste to Energy and Added-Value Materials. Waste Biomass Valor. 2017, 8, 1875–1884. [Google Scholar] [CrossRef]
  2. Qazi, W.A.; Abushammala, M.F.M.; Azam, M.-H.; Younes, M.K. Waste-to Energy Technologies: A Literature Review. J. Solid Waste Technol. Manag. 2018, 44, 387–409. [Google Scholar] [CrossRef]
  3. Bolis, V.; Capón-García, E.; Roca-Puigros, M.; Gazzola, A.; Hungerbühler, K. Opimal Design and Management of Industrial Waste-to-Energy Systems. Ind. Eng. Chem. Res. 2019, 58, 3735–3753. [Google Scholar] [CrossRef]
  4. Seljak, V.; Buffi, M.; Valera-Medina, A.; Chong, C.T.; Chiaramonti, D.; Katrašnik, T. Bioliquids and their Use in Power Generation—A Technology Review. Renew Sustain. Energy Rev. 2020, 129, 109930. [Google Scholar] [CrossRef]
  5. Bora, A.P.; Gupta, D.P.; Durbha, K.S. Sewage Sludge to Bio-Fuel: A Review on the Sustainable Approach of Transforming Sewage Waste to Alternative Fuel. Fuel 2020, 259, 116262. [Google Scholar] [CrossRef]
  6. Gil, A. Current insights into Lignocellulose Related Waste Valorization. Chem. Eng. J. Adv. 2021, 8, 100186. [Google Scholar] [CrossRef]
  7. Gil, A. Challenges on Waste-to-Energy for the Valorization of Industrial Wastes: Electricity, Heat and Cold, Bioliquids and Biofuels. Environ. Nanotechnol. Monit. Manag. 2022, 17, 100615. [Google Scholar] [CrossRef]
  8. Gil, A.; Korili, S.A. Management and Valorization of Aluminum Saline Slags: Current Status and Future Trends. Chem. Eng. J. 2016, 289, 7484. [Google Scholar] [CrossRef]
  9. Kieling, A.C.; de Macedo Neto, J.C.; Del Pino, G.G.; da Silva Barboza, R.; Diáz, F.R.V.; Rivera, J.L.V.; Fernández, M.V.; Ketterer, C.G.; Ortega, A.G.; Abarzúa, R.I. Development of an Epoxy Matrix Hybrid Composite with Astrocaryum Aculeatum (Tucumã) Endocarp and Kaolin from the Amazonas State in Brazil. Polymers 2023, 15, 2532. [Google Scholar] [CrossRef] [PubMed]
  10. Neto, J.S.; de Queiroz, H.F.; Aguiar, R.A.; Banea, M.D. A Review on the Thermal Characterisation of Natural and Hybrid Fiber Composites. Polymers 2021, 13, 4425. [Google Scholar] [CrossRef] [PubMed]
  11. Kieling, A.C.; Santana, G.P.; Santos, M.C.D.; Neto, J.C.D.M.; Pino, G.G.D.; Santos, M.D.D.; Duvoisin Jr, S.; Panzera, T.H. Wood-Plastic Composite Based on Recycled Polypropylene and Amazonian Tucumã (Astrocaryum aculeatum) Endocarp Waste. Fibers Polym. 2021, 22, 2834–2845. [Google Scholar] [CrossRef]
  12. Neves, P.D.; Cabral, M.R.; Santos, V.; Mafra, M.R.P.; Junior, H.S. Technical Assessment of Leaf Fibers from Curaua: An Amazonian Bioresource. J. Nat. Fibers 2022, 19, 5900–5909. [Google Scholar] [CrossRef]
  13. Nicolas, R.; Richard, B.; Nicolas, D.; Irina, I.; Temitope, K.J.; Dirk, L.; Viktor, M.; Romain, M.; Arnaud, P.; Ursula, P.; et al. Assessing the Fresh Properties of Printable Cement-Based Materials: High Potential Tests for Quality Control. Cem. Concr. Res. 2022, 158, 106836. [Google Scholar] [CrossRef]
  14. Biricik, Ö.; Mardani, A. Parameters Affecting Thixotropic behavior of Self Compacting Concrete and 3D Printable Concrete; a State-of-the-Art Review. Constr. Build. Mater. 2022, 339, 127688. [Google Scholar] [CrossRef]
  15. Li, R.; Lei, L.; Plank, J. Influence of PCE Superplasticizers on the Fresh Properties of Low Carbon Cements Containing Calcined Clays: A Comparative Study of Calcined Clays from Three Different Sources. Cem. Concr. Compos. 2023, 139, 105072. [Google Scholar] [CrossRef]
  16. Lee, S.B.; Stone, G.C.; Antonino-Daviu, J.; Gyftakis, K.N.; Strangas, E.G.; Maussion, P.; Platero, C.A. Condition Monitoring of Industrial Electric Machines: State of the Art and Future Challenges. IEEE Ind. Electron. Mag. 2020, 14, 158–167. [Google Scholar] [CrossRef]
  17. Shukla, K.; Nefti-Meziani, S.; Davis, S. A Heuristic Approach on Predictive Maintenance Techniques: Limitations and Scope. Adv. Mech. Eng. 2022, 14, 16878132221101009. [Google Scholar] [CrossRef]
  18. Stojcic, M.; Zavadskas, E.K.; Pamučar, D.; Stević, Ž.; Mardani, A. Application of MCDM Methods in Sustainability Engineering: A Literature Review 2008–2018. Symmetry 2019, 11, 350. [Google Scholar] [CrossRef]
  19. Banasik, A.; Bloemhof-Ruwaard, J.M.; Kanellopoulos, A.; Claassen, G.; Van Der Vorst, J.G. Multi-Criteria Decision Making Approaches for Green Supply Chains: A Review. Flex. Serv. Manuf. J. 2018, 30, 366–396. [Google Scholar] [CrossRef]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Gil Bravo, A. Special Issue: Feature Papers in Eng 2023. Eng 2024, 5, 562-565. https://doi.org/10.3390/eng5020031

AMA Style

Gil Bravo A. Special Issue: Feature Papers in Eng 2023. Eng. 2024; 5(2):562-565. https://doi.org/10.3390/eng5020031

Chicago/Turabian Style

Gil Bravo, Antonio. 2024. "Special Issue: Feature Papers in Eng 2023" Eng 5, no. 2: 562-565. https://doi.org/10.3390/eng5020031

Article Metrics

Back to TopTop