Editor’s Choice Articles

This article focuses on determining the optimum structure for a hybrid generation and storage system designed to power a single-family housing estate, taking into account the different number of electric vehicles in use and an assumed level of self-consumption of the generated energy. In terms of generation, two generation sections—wind and solar—and a lithium-ion container storage system will be taken into account. With regards to energy consumption, household load curves, determined on the basis of the tariff for residential consumers and modified by a random disturbance, will be taken into account, as well as the processes for charging electric cars with AC chargers, with power outputs ranging between 3.6 and 22 kW. Analyses were carried out for three locations in Poland—the Baltic Sea coast (good wind conditions), the Lublin Uplands (the best insolation in Poland) and the Carpathian foothills (poor wind and insolation conditions). The mathematical and numerical model of the system and the MOPSO (multiobjective particle swarm optimisation) algorithm were implemented in the Matlab environment. The results include Pareto fronts (three optimisation criteria: minimisation of energy storage capacity, minimisation of energy exchanged with the power grid and maximisation of the self-consumption rate) for the indicated locations and three electromobility development scenarios with determined NPVs (net present values) for a 20-year lifetime. The detailed results relate to the inclusion of an additional expert criterion in the form of a coupled payback period of no more than 10 years, a maximum NPV in the last year of operation and a self-consumption rate of at least 80%. The economic calculations take into account the decrease in PV installation capacity as a function of the year of operation, as well as changes in electricity and petrol prices and variations in energy prices at purchase and sale. Full article

Quality, reliability, and durability are the key features of photovoltaic (PV) solar system design, production, and operation. They are considered when manufacturing every cell and designing the entire system. Achieving these key features ensures that the PV solar system performs satisfactorily and offers years of trouble-free operation, even in adverse conditions. In each cell, the quality of the raw material should meet the quality standards. The fulfillment of the quality management system requires every part that goes into the PV solar system to undergo extensive testing in laboratories and environments to ensure it meets expectations. Hence, every MWh of electricity generated by the PV solar system is counted, the losses should be examined, and the PV system’s returns should be maximized. There are many types of losses in the PV solar system; these losses are identified and quantified based on knowledge and experience. They can be classified into two major blocks: optical and electrical losses. The optical losses include, but are not limited to, partial shading losses, far shading losses, near shading losses, incident angle modifier (IAM) losses, soiling losses, potential induced degradation (PID) losses, temperature losses, light-induced degradation (LID) losses, PV yearly degradation losses, array mismatch losses, and module quality losses. In addition, there are cable losses inside the PV solar power system, inverter losses, transformer losses, and transmission line losses. Thus, this work reviews the losses in the PV solar system in general and the 103 MWp grid-tied Al Quweira PV power plant/Aqaba, mainly using PVsyst software. The annual performance ratio (PR) is $79.5\%$, and the efficiency $\left(\eta \right)$ under standard test conditions (STC) is $16.49\%$. The normalized production is 4.64 kWh/kWp/day, the array loss is 1.69 kWh/kWp/day, and the system loss is 0.18 kWh/kWp/day. Understanding factors that impact the PV system production losses is the key to obtaining an accurate production estimation. It enhances the annual energy and yield generated from the power plant. This review benefits investors, energy professionals, manufacturers, installers, and project developers by allowing them to maximize energy generation from PV solar systems and increase the number of solar irradiation incidents on PV modules. Full article

The demand for a reliable, cheap and environmentally friendly source of energy makes the integration of renewable energy into power networks a global challenge. Furthermore, reliability, as one of the core elements of efficient and cost-effective energy management options, is still among the dominant factors/techniques that receive more attention for realistic penetrations of renewable energy into the electricity grid. This paper proposes an efficient way of energy management for a grid-connected microgrid. The grid-connected microgrid used in the analysis consists of solar photovoltaic (P.V.) and battery. In this microgrid configuration, oftentimes, the output power might not be equal to the system demand; in this regard, it is expected that the mismatch between these output powers is not zero. However, to reduce the mismatch between demand and supply to be close to zero, this paper proposes strategies of increasing the rated power of solar, battery and grid separately and combining them with a view of finding the cheapest option among these strategies. The results have shown that the cost increment for different options is USD 280.792, 84.48 and 48.204 for storage, P.V. and grid, respectively. These have shown that the storage option is the most expansive option for improving P.V. grid-connected microgrids. This is followed immediately by the P.V. option, which is weather dependent. On the other hand, the grid option is the cheapest option for system reliability improvement. This paper is expected to be useful to both new researchers and experts who are working in energy management with an emphasis on the reliability aspect. Full article

The primary purpose of this article is to use the laws of thermodynamics, mainly the second and fourth laws, to evaluate three energy technologies of the future: fusion, solar, and fission. Among the criteria used to evaluate them, the most important are the amount of matter needed to sustain the technology itself and the environmental impact. Much emphasis is placed here on the fourth law of thermodynamics, which introduces the concept of material entropy. Zemansky–Georgescu-Roegen’s Law of Inevitable Dissipation of Useful Concentrated Matter states that, in the economic process, some matter is inevitably degraded and becomes unavailable matter. This has tremendous implications for humanity as a whole since the Earth is thermodynamically a closed system, meaning that it cannot exchange matter with space but is open to the flow of solar energy. This results in the need to conserve matter and natural resources. This law can be used as an important criterion for the selection of energy technology. Moreover, the flow–fund model, which was proposed by Georgescu-Roegen, was used to assess the viability of energy technologies. The final conclusion is that there is no Promethean technology of the third kind yet, but the closest to meeting this condition is solar technology. Technology based on nuclear fission has been rejected due to its adverse ecological effects, while fusion technology has proven to be less useful due to the matter criterion, the negative environmental impact, since radioactive waste only becomes safe for humans after 500 years, and the risks associated with nuclear proliferation. Solar technology can become Prometheus III only after all of humanity is involved with this project, which requires profound social changes, widespread demilitarization, and the development of organic agriculture. This implies the necessity of the emergence of a global solar society based on an economic system called solar communism. Full article

The transition towards climate neutrality will result in an increase in electrical vehicles, as well as other electric loads, leading to higher loads on electrical distribution grids. This paper presents an optimisation algorithm that enables the integration of more loads into distribution grid infrastructure using information from smart meters and/or smart meter gateways. To achieve this, a mathematical programming formulation was developed and implemented. The algorithm determines the optimal charging schedule for all electric vehicles connected to the distribution grid, taking into account various criteria to avoid violating physical grid limitations and ensuring non-discriminatory charging of all electric vehicles on the grid while also optimising grid operation. Additionally, the expandability of the infrastructure and fail-safe operation are considered through the decentralisation of all components. Various scenarios are modelled and evaluated in a simulation environment. The results demonstrate that the developed optimisation algorithm allows for higher transformer loads compared to a P(U) control approach, without causing grid overload as observed in scenarios without optimisation or P(U) control. Full article

The main objective of this paper is to propose two innovative monitoring methods for electrical disturbances in low-voltage networks. The two approaches present a focus on the classification of voltage signals in the frequency domain using machine learning techniques. The first technique proposed here uses the Fourier transform (FT) of the voltage waveform and classifies the corresponding complex coefficients through a multilayered neural network with multivalued neurons (MLMVN). In this case, the classifier structure has three layers and a small number of neurons in the hidden layer. This allows complex-valued inputs to be processed without the need for pre-coding, thus reducing computational cost and keeping training time short. The second technique involves the use of the short-time Fourier transform (STFT) and a convolutional neural network (CNN) with 2D convolutions in each layer for feature extraction and dimensionality reduction. The voltage waveform perturbations taken into consideration are: voltage sag, voltage swell, harmonic pollution, voltage notch, and interruption. The comparison between the two proposed techniques is developed in two phases: initially, the simulated data used during the training phase are considered and, subsequently, various experimental measurements are processed, obtained both through an artificial disturbance generator and through a variable load. The two techniques represent an innovative approach to this problem and guarantee excellent classification results. Full article

The ERTMS/ETCS is the newest automatic train protection system. This is a system that supports the driver in driving the train. It is currently being implemented throughout the European Union. This system’s latest specifications also provide additional functions to increase the energy efficiency of train driving in the form of ATO (automatic train operation). These functions of the ETCS will be valuable, provided they operate without failure. To achieve errorless configuration of the ETCS, a methodology for automatic system verification using the IMDS (Integrated Model of Distributed Systems) formalism and the temporal tool Dedan was applied. The main contribution is asynchronous and timed verification, which appropriately models the distributed nature of the ETCS and allows the designer not only to analyze time dependencies but also to define the range of train velocities in which the operational scenario is valid. Additionally, the novelties of the presented verification methodology are the graphical design of the system components and automated verification freeing the designer from using textual design. We express the verified properties as observer automata rather than in temporal logic. Moreover, we check partial properties related to system fragments, which is crucial in distributed systems. This paper presents the verification of an example ETCS system application. The verification results are presented as sequence diagrams leading to a correct/incorrect final state. Full article

The use of renewable energy sources such as solar photovoltaic, wind, and fuel cells is becoming increasingly prevalent due to a combination of environmental concerns and technological advancements, as well as decreasing production costs. Power electronics DC-DC converters play a key role in various applications, including hybrid energy systems, hybrid vehicles, aerospace, satellite systems, and portable electronic devices. These converters are used to convert power from renewable sources to meet the demands of the load, improving the dynamic and steady-state performance of green generation systems. This study presents a comparison of the most commonly used non-isolated DC-DC converters for fuel cell applications. The important factors considered in the comparison include voltage gain ratio, voltage switch stress, voltage ripple, efficiency, cost, and ease of implementation. Based on the comparison results, the converters have been grouped according to voltage level applications, with low voltage applications being best served by converters such as DBC, DuBC, TLBC, 2-IBC, 1st M-IBC, PSOL, SEPIC, and 1st M-SEPIC owing to their lower cost, smaller size, and reduced switch stress. Medium voltage applications are best suited to converters such as TBC, 1st M-TLBC, 2nd M-TLBC, 4-IBC, 1st M-IBC, 2nd M-IBC, 1st M-PSOL, 2nd M-PSOL, 1st M-SEPIC, and 2nd M-SEPIC, which offer higher efficiency. Finally, high voltage applications are best served by converters such as TBC, 1st M-TBC, 2nd M-IBC, 3rd M-IBC, 3rd M-PSOL, 4th M-PSOL, 2nd M-SEPIC, 3rd M-SEPIC, and 4th M-SEPIC. Full article

Community energy projects have gained popularity in recent years, and encouraging citizens to form local energy communities (LEC) is considered an effective tool for raising awareness about renewable energy. Since no single universal method exists for operating LECs, this study investigated the impact that different business models and asset dispatch methods have on LECs’ economic and energy-related indicators. We carried out a case study, which included the development, modelling, and simulation of seven scenarios using mixed-integer linear programming (MILP). To measure and compare the prospective performance of the LECs in each scenario, six key metrics were evaluated and assessed. The authors find that simple, rule-based control systems might be well suited for LECs with a limited number of controllable assets that aim to provide increased levels of self-consumption of up to 3%. We also conclude that when the LEC utilises an energy cooperative business model, the selected asset dispatch method provides only minor differences in LEC performance, while for prosumer communities, the importance of selecting a suitable asset dispatch method is higher. We also conclude that LECs have the potential to significantly increase their economic performance by more than 10% by acting as aggregators and providing grid services directly to system operators. Full article

In the last few years, many innovative solutions have been presented to address the climate change crisis. One of the innovative solutions is the participation of community members in the collective production of solar electricity instead of individual production. The current study aims to provide a critical literature review of the collective production of solar electricity, which is called “community-shared solar” (CSS). Sixty-seven peer-reviewed publications were selected based on the setting up of a combination of related keywords. To analyze the concept of CSS in the existing literature, a multi-level perspective (MLP) framework was used to observe the CSS innovation at the niche, regime, and landscape levels. Four aspects, including the technical, economic, socio-political, and regulatory and institutional, were considered to evaluate those three levels. The results revealed that in the technical and economic aspects, CSS has reached maturity and internal momentum that can take it to the next levels. However, a lack of attention to the socio-political aspect and the regulatory and institutional aspect, in particular, is the potential barrier to the emergence of CSS and its potential position as a leading energy system. Full article

The pretreatment of biomass through torrefaction is an effective means of improving the fuel quality of woody biomass and its suitability for use in existing facilities burning thermal coal. Densification of torrefied biomass produces a fuel of similar energy density, moisture content, and fixed carbon content to low-grade coals. Additionally, if the torrefaction conditions are optimized, the produced torrefied pellet will be resistant to weathering and biological degradation, allowing for outdoor storage and transport in a manner similar to coal. In untreated biomass, lignin is the primary binding agent for biomass pellets and is activated by the heat and pressures of the pellet extrusion process. The thermal degradation of lignin during torrefaction reduces its binding ability, resulting in pellets of low durability not suitable for transportation. The use of a binding agent can increase the durability of torrefied pellets/briquettes through a number of different binding mechanisms depending on the binder used. This study gives a review of granular binding mechanisms, as they apply to torrefied biomass and assesses a variety of organic and inorganic binding agents, ranking them on their applicability to torrefied pellets based on a number of criteria, including durability, hydrophobicity, and cost. The best binders were found to be solid lignin by-product derived from pulp and paper processing, biomass tar derived from biomass pyrolysis, tall oil pitch, and lime. Full article

Indonesia’s final energy demand is projected to increase by 70% in the next decade, with electricity expected to account for 32%. The increasing electricity demand poses a potential threat to national emissions reduction targets since fossil fuels generated 86% of the electricity in 2018, associated to 50% of the national CO₂ emissions. Indonesia plans to reduce its CO₂ emissions by 29% by increasing the total electricity generated from renewables, using a set of market-based and regulatory policies. However, economic, social, and environmental issues may arise from the widespread adoption of renewable energy. This study explores the economic, social, and environmental effects of renewable energy policies in the electricity sector. Our work presents an advance over previous studies that attempted to understand the electricity sector energy transition from a system perspective by exploring the structural feedback between it and economic, energy, and environmental systems. This enables the assessment of different energy policies using more macro indicators, which further emphasize the novelty of our work. A combination of system dynamics modelling and a policy analysis framework was applied to explore these issues. Our study proposes a dynamic hypothesis that the price of energy increases over time, in the absence of substitution, becoming a limiting factor in the transition to renewables in the electricity sector. The fiscal budget was found to be a bottleneck for renewable energy adoption in the electricity sector in Indonesia. We found that a fossil fuel depletion premium could be a potential supporting policy to enable the smooth phasing-out of fossil fuels and support a sustainable energy transition. Full article

Operation modes of rolling stock at mining enterprises are considered and analyzed. The justification of the need to replace it with a modern specialized electric locomotive for quarry railway transport, equipped with an asynchronous traction electric drive and an on-board energy storage system, is presented. The determination of the parameters and structure of the on-board energy storage system, based on the condition of power compensation with limited power consumption from the traction network and ensuring the autonomous movement of the electric locomotive, is considered. This study was carried out by modeling the processes of energy exchange in the traction system of an electric locomotive. The use of lithium cells and supercapacitors in energy storage is considered. Variants of the hybridization of energy storage were studied from the standpoint of minimizing the weight, size, and cost indicators. It was established that reducing the mass of the energy storage device, which includes lithium cells and supercapacitors, leads to an increase in the cost of one kilowatt-hour of energy storage capacity, which reduces the attractiveness of capital expenditures for the creation of such an energy storage device. Hybridization of the energy storage device by combining lithium cells of different types practically does not improve its weight, size, and cost indicators. The recommended option is a storage capacity of energy based on LTO elements, for which it is necessary to select elements in order to minimize weight, size, and cost indicators. Full article

Synthesis gas (syngas) fermentation is a biological carbon fixation process through which carboxydotrophic acetogenic bacteria convert CO, CO₂, and H₂ into platform chemicals. To obtain an accurate overview of the syngas fermentation research and innovation from 2012 to 2022, a systematic search was performed on Web of Science and The Lens, focusing on academic publications and patents that were published or granted during this period. Overall, the research focus was centered on process optimization, the genetic manipulation of microorganisms, and bioreactor design, in order to increase the plethora of fermentation products and expand their possible applications. Most of the published research was initially funded and developed in the United States of America. However, over the years, European countries have become the major contributors to syngas fermentation research, followed by China. Syngas fermentation seems to be developing at “two-speeds”, with a small number of companies controlling the technology that is needed for large-scale applications, while academia still focuses on low technology readiness level (TRL) research. This systematic review also showed that the fermentation of raw syngas, the effects of syngas impurities on acetogen viability and product distribution, and the process integration of gasification and fermentation are currently underdeveloped research topics, in which an investment is needed to achieve technological breakthroughs. Full article

The development of innovative technologies based on employing green energy carriers, such as hydrogen, is becoming high in demand, especially in the automotive sector, as a result of the challenges associated with sustainable mobility. In the present review, a detailed overview of the entire hydrogen supply chain is proposed, spanning from its production to storage and final use in cars. Notably, the main focus is on Polymer Electrolyte Membrane Fuel Cells (PEMFC) as the fuel-cell type most typically used in fuel cell electric vehicles. The analysis also includes a cost assessment of the various systems involved; specifically, the materials commonly employed to manufacture fuel cells, stacks, and hydrogen storage systems are considered, emphasizing the strengths and weaknesses of the selected strategies, together with assessing the solutions to current problems. Moreover, as a sought-after parallelism, a comparison is also proposed and discussed between traditional diesel or gasoline cars, battery-powered electric cars, and fuel cell electric cars, thus highlighting the advantages and main drawbacks of the propulsion systems currently available on the market. Full article

Self-consumption of the energy generated by photovoltaics (PV) is playing an increasingly important role in the power grid. “Prosumer” systems consume part of the produced energy directly to meet the local demand, which reduces the feed-in into as well as the demand from the grid. In order to analyse the effects of PV self-consumption in the power grid, we introduce a stochastic bottom-up model of PV power generation and local consumption in the control area of the German transmission system operator TransnetBW. We set up a realistic portfolio of more than 100,000 PV/prosumer systems to generate representative time series of PV generation and consumption as a basis to derive self-consumption and feed-in. This model allows for the investigation of the time-dependent behaviour in detail for the full portfolio whereas measurements are presently only available as aggregated feed-in time series over a nonrepresentative subset of systems. We analyse the variation of self-consumption with PV generation and consumption at the portfolio level and its seasonal, weekly and diurnal cycles. Furthermore, we study a scenario of 100% prosumers as a limiting case for a situation without subsidized feed-in tariffs and local energy storage. Full article

A reliable power grid system based on renewable energy sources is a crucial step to restrict the climate crisis. Stationary battery energy storage systems (BESS) offer a great potential to repel power fluctuations in the grid at different timescales. However, for a reliable operation and cost estimation, the degradation in the batteries needs to be understood. We present an accelerated battery degradation study, on single as well as multi-service applications, of NCM532/Gr lithium-ion battery cells. Frequency regulation (FR) was the least harmful for the battery, with an expected lifetime of 12 years, while peak shaving (PS) resulted in an expected lifetime of 8 years. The combined cycle (FRPS) accelerated the capacity loss, and degradation of the positive electrode was induced from the start of cycling, causing power limitations after only 870 equivalent full cycles (EFC). Tracking the 1C-rate discharge capacity was proven to be a good indication of the accelerated cell polarization, and it can serve as a useful method to evaluate the internal battery state of health (SOH). Full article

The global energy sector is in a period of transition, during which time it is expected that renewable and low-carbon energy sources, such as wind and solar, will replace traditional fossil fuels, including oil, gas, and coal. The energy transition is happening not only to limit the environmental impact of fossil fuel production and consumption but also to ensure energy security, reliability, access, affordability, and sustainability. The importance of the energy transition has been amplified by recent events, notably the Russian-Ukraine conflict. Economic, financial, and trade sanctions against Russia, and in particular its oil and gas industry, have forced countries to find new suppliers in the short term, but also to investigate new and more sustainable sources to guarantee long-term energy security. Given the importance of energy, it is perhaps not unexpected that there is a considerable body of recent academic literature, particularly over the last 4–5 years, studying what industries, consumers, governments, and markets can do to help bring about a faster energy transition. In this paper, we provide a review of the literature that pertains to the economic aspects of the energy transition. While our initial search of the literature is targeted at uncovering all relevant articles on the subject, we focus most of our discussion on the most influential articles in prominent journals and articles published in this journal—Energies. This review is intended to help identify active topics and potential research gaps and provide future direction, so we hope it will prove useful to the readers and authors interested in this topic. Full article

Methane and methanol are promising products for CO₂ hydrogenation for carbon capture and utilization concepts. In the search for effective, robust, easy-to-manufacture and stable catalysts, supported metal-based catalysts have proven advantageous. Whereas nickel for methane synthesis and copper for methanol synthesis stand out as efficient and cost-effective catalytically active metals, the best choice of support material is still a matter of ongoing debate. This review discusses the potential of the alkaline earth metal oxide MgO as support material for CO₂ hydrogenation catalysts. Due to its basicity, it gives access to bifunctional catalysts as it shows pronounced CO₂ adsorption capacity. Whereas carbonate formation seems to be beneficial in CO₂ methanation, it may even have an adverse effect in methanol synthesis from CO₂. Full article

Among the alternative fuels enabling the energy transition, hydrogen-based transportation is a sustainable and efficient choice. It finds application both in light-duty and heavy-duty mobility. However, hydrogen gas has unique qualities that must be taken into account when employed in such vehicles: high-pressure levels up to 900 bar, storage in composite tanks with a temperature limit of 85 °C, and a negative Joule–Thomson coefficient throughout a wide range of operational parameters. Moreover, to perform a refueling procedure that is closer to the driver’s expectations, a fast process that requires pre-cooling the gas to −40 °C is necessary. The purpose of this work is to examine the major phenomena that occur during the hydrogen refueling process by analyzing the relevant theory and existing modeling methodologies. Full article

In this study, biomass–specific gasification data is experimentally collected for numerical simulations of fixed–bed reactors. Since biomass properties vary, it is crucial to have characteristic biomass data. Extensive data is collected to determine an appropriate description of specific biomass behavior, including basic data (e.g., heating value, size, densities, ultimate and total analysis etc.), biomass pyrolysis and heterogeneous gasification reaction data. Heterogeneous reactions were comparatively investigated in the forms of powder, particles, and a fixed–bed. The powder was investigated in depth with CO₂, O₂, and H₂O (gas fraction 5–20 vol.%; temperature CO₂, O₂ and H₂O, respectively, at 730–790 °C, 360–405 °C, 720–780 °C), while particle reactions and fixed–bed reaction were only studied with CO₂. A model description for a fixed–bed batch reactor was applied, modified, and compared to experimental fixed–bed batch reactor results. This study concludes that determining the appropriate characteristic particle size and parameters for the porous structure of specific biomass char is essential for simulation based on preliminary biomass characterization. Therefore, in future investigations, the description for biomass-specific differences between powder, single particles, and bulk of biomass char may be of greater focus, also taking into consideration O₂ and H₂O. Full article

In electrical grids with a high renewable percentage, weather conditions have a greater impact on power generation. This can lead to the overproduction of electricity during periods of substantial wind power generation, resulting in shutoffs of wind turbines. To reduce such shutoffs and to bridge periods of lower electricity production, three thermal energy storage systems (TESs) have been developed for space heating and domestic hot water. These include a water-based thermal system (WBTS), a thermally activated building system (TABS), and a high-temperature stone storage system (HTSS). The paper explains the development of computer models used to simulate the systems and their successful verification using field measurements. Target values to cover about 90% of building heating demand with excess electricity were found to be achievable, with performance ratios depending on storage size, particularly for WBTS and HTSS. The TABS’ storage capacity is limited by building geometry and the available inner ceilings and walls. Full article

A countermeasure to global warming is removing high CO₂ amounts from the atmosphere and locating the emitted CO₂ into long-term stable carbon storage sites. The sequestration technologies must be reliable, long-lasting, and environmentally friendly. An alternative and innovative approach that may meet the sequestration requirements is CO₂ storage as clathrate hydrates in marine environments. Extensive research has been devoted to CO₂-CH₄ replacement in natural gas hydrates. Another option is the direct formation of CO₂ hydrates into deep ocean water or into marine underfloor sediments. This article deals with the positioning of direct hydrate-based CO₂ storage among the other traditional geological options and the discussion of new, by-far, state-of-the-art knowledge required for the development of a hydrate-based CO₂ storage pathway that is reliable, stable, durable, efficient, and environmentally benign. Full article

Employment of a battery energy storage system to compensate for the generation-consumption mismatch is a vital element for a resilient microgrid. However, the frequent (i.e., short-term) cyclic activity and the abrupt current variations (i.e., high di/dt) have adverse effects on the energy-type battery’s lifespan. On the other hand, the power-type supercapacitor energy storage system (SCES) has almost zero lifetime degradation when it is subjected to irregular charging/discharging patterns. Therefore, the hybridization between them can reduce battery stress levels. This study proposes a droop control algorithm with multiple segments for a SCES/battery hybrid energy storage system (HESS) that is employed in a solar/wind DC microgrid. The presented control scheme is decentralized since it avoids the central controller (CC) and the communication links between the controllers of SCES and battery units. To eliminate the short-term cyclic operation of the battery, the SCES regulates the bus voltage inside a narrow zone with a droop curve that exploits all its available energy capacity. Inside this zone, the battery is kept inactive. As soon as the bus voltage deviates from this band, the SCES enters the idle mode, and the battery is triggered following a droop curve different for charging or discharging mode to stabilize the bus voltage. To evaluate the effectiveness of the proposed system over a battery-only system and a hybrid SCES/battery system controlled with the classical droop method, a comparative analysis under different scenarios is presented. Full article

Over the three-day gasification test of a large coal block with oxygen in atmospheric pressure conditions, the yield and composition of the tar collected was investigated. The tar was sampled approximately every 7 h into sorption tubes directly from the reactor outlet. Sand, with a moisture content of 11%, was used as an insulating material to simulate the environment of the gasified coal seam. Light aromatic hydrocarbons (BTEX), phenols, and polycyclic aromatic hydrocarbons (PAHs) were determined in the tar. The results that were obtained were recalculated into the concentrations of the individual components of the tar and its mass stream in the process gas. The residence time of the tar in the reactor, its molar mass, and the H/C ratio were also calculated. As the reaction progressed, the water that was contained in the wet sand started to react with the gasified coal, which significantly affected the composition and amount of the obtained process gas and the produced tar. Due to an increase in the amount of generated gases and steam, the residence time of the tar vapours in the reactor decreased as the gasification progressed, ranging from approximately 1 s at the beginning of the process to 0.35 s at the end. The obtained tar was characterised by a high average content of BTEX fractions at approximately 82.6%, PAHs at 14.7%, and phenols at 2.7%. Benzene was the dominant BTEX compound, with a concentration of 83.7%. The high content of the BTEX compounds, especially benzene, was a result of secondary processes taking place in the tar (hydrocracking and steam reforming), and as a result of which, in the presence of hydrogen and steam, the heavier components of the tar were transformed into lighter ones. The total yield of the tar from this UCG (underground coal gasification) process—calculated per 1 ton of gasified coal—was 1.8% (counted on the basis of the analysed tar composition). Comparing this result to the efficiency of the classic coking process, the tar yield was about three times lower. Full article

Microbial fuel cell (MFC) technology is anticipated to be a practical alternative to the activated sludge technique for treating domestic and industrial effluents. The relevant literature mainly focuses on developing the systems and materials for maximum power output, whereas understanding the fundamental electrochemical characteristics is inadequate. This experimental study uses a double-chamber MFC having graphite electrodes and an anion-exchange membrane to investigate the electrochemical process limitations and the potential of bioelectricity generation and dairy effluent treatment. The results revealed an 81% reduction in the chemical oxygen demand (COD) in 10 days of cell operation, with an initial COD loading of 4520 mg/L. The third day recorded the highest open circuit voltage of 396 mV, and the maximum power density of 36.39 mW/m² was achieved at a current density of 0.30 A/m². The electrochemical impedance spectroscopy analysis disclosed that the activation polarization of the aerated cathode was the primary factor causing the cell’s resistance, followed by the ohmic and anodic activation overpotentials. Full article

Internal combustion engines face increased market, societal, and governmental pressures to improve performance, requiring researchers to utilize modeling tools capable of a thorough analysis of engine performance. Heat release is a critical aspect of internal combustion engine diagnostic analysis, but is prone to variability in modeling validity, particularly as engine operation is pushed further from conventional combustion regimes. To that end, this effort presents a comprehensive open-source, zero-dimensional equilibrium heat release model. This heat release analysis is based on a combined mass, energy, entropy, and exergy formulation that improves upon well-established efforts constructed around the ratio of specific heats. Furthermore, it incorporates combustion using an established chemical kinetics mechanism to endeavor to predict the global chemical species in the cylinder. Future efforts can augment and improve the chemical kinetics reactions for specific combustion conditions based on the radical pyrolysis of the fuel. In addition, the incorporation of theoretical calculations of energy and exergy based on the change in chemical species allows for cross-checking of combustion model validity. Full article

The description of the functionality of a smart grid’s architectural concept, analyzing different Smart Grid (SG) scenarios without disrupting the smooth operation of the individual processes, is a major challenge. The field of smart energy grids has been increasing in complexity since there are many stakeholder entities with diverse roles. Electric Vehicles (EVs) can transform the stress on the energy grid into an opportunity to act as a flexible asset. Smart charging through an external control system can have benefits for the energy sector, both in grid management and environmental terms. A suitable model for analyzing and visualizing smart grid use cases in a technology-neutral manner is required. This paper presents a flexible architecture for the potential implementation of electromobility as a distributed storage asset for the grid’s capacity optimization by applying the Use Case and Smart Grid Architecture Model (SGAM) methodologies. The use case scenario of booking a charge session through a mobile application, as part of the TwinERGY Horizon 2020 project, is deployed to structure the SGAM framework layers and investigate the applicability of the SGAM framework in the integration of electromobility as a distributed storage asset into electricity grids with the objective of enhanced flexibility and decarbonization. Full article

Given the fundamental role of renewable energy assets in achieving global temperature control targets, new energy management methods are required to efficiently match intermittent renewable generation and demand. Based on analysing various designed cases, this paper explores a number of heuristics for a smart battery scheduling algorithm that efficiently matches available power supply and demand. The core of improvement of the proposed smart battery scheduling algorithm is exploiting future knowledge, which can be realized by current state-of-the-art forecasting techniques, to effectively store and trade energy. The performance of the developed heuristic battery scheduling algorithm using forecast data of demands, generation, and energy prices is compared to a heuristic baseline algorithm, where decisions are made solely on the current state of the battery, demand, and generation. The battery scheduling algorithms are tested using real data from two large-scale smart energy trials in the UK, in addition to various types and levels of simulated uncertainty in forecasts. The results show that when using a battery to store generated energy, on average, the newly proposed algorithm outperforms the baseline algorithm, obtaining up to 20–60% more profit for the prosumer from their energy assets, in cases where the battery is optimally sized and high-quality forecasts are available. Crucially, the proposed algorithm generates greater profit than the baseline method even with large uncertainty on the forecast, showing the robustness of the proposed solution. On average, only 2–12% of profit is lost on generation and demand uncertainty compared to perfect forecasts. Furthermore, the performance of the proposed algorithm increases as the uncertainty decreases, showing great promise for the algorithm as the quality of forecasting keeps improving. Full article

Stochastic power generation is the new reality in power system management. Voltage Control mechanisms based on physical assets of the power system are deemed inadequate and are not guaranteed to lead the energy transformation in a way that ensures system security as well as cost-effective operation. Many countries that recently attained deregulated Balancing Market environments are in need of regulatory provisions and rigorous extension of electricity market mechanisms. On 1 November 2020, the Greek Electricity Market commenced operations conforming to the European Target Model. Apart from the innate difficulties a transformation such as this contains, more challenges occur as Greece is bound by European law to design market-based incentive mechanisms to remunerate Ancillary Services provided to the power system. This paper aims to examine some of the technical and regulatory aspects linked with—future—Transmission System Operator (TSO) and Distribution System Operator (DSO) cooperation in overcoming local transmission system problems concerning Voltage regulation. The interaction between localized Voltage Control Market (VCM) and the Balancing Market, the incorporation and competition of Distributed Energy Resources (DER) and Transmission Energy Resources (TER) within the VCM along with the TSO - DSO procedures and products standardization are the focus points of the present research paper. Full article

This article explores the use of battery energy storage in a transactive energy approach for a heavily solar-penetrated community. We hypothesize that the efficient market interactions between independently acting, fully automated agents (some equipped with battery energy storage) can result in both bill savings and improvements in power flow, without explicitly optimizing for power flow ahead of time. A test setting of nine typical residential prosumers and one heavily loaded prosumer is used. The heavily loaded prosumer initially experiences multiple undervoltage violations, and a 13.5 kWh battery is installed to alleviate the problem. Two profile-shaping strategies are compared. The first scenario uses greedy control that maximizes self-sufficiency, while the second scenario uses a local market to enable energy trading between participants and a rule-based trading and management agent for control. The results show that the first scenario made minimal improvements to power flow, but the second scenario eliminated all occurrences of under-voltage violations. Furthermore, the total amount of energy from the grid is reduced by 24.3%, and the amount of energy injected into the grid is reduced by 39.2%. This results in lower bills for every participant and a bill reduction of 16.7% for the community as a whole. Full article

Fiscal policy is an essential tool that policymakers use for guiding the economy. Thus, the effects of fiscal policy may affect many aspects of our lives, including the impact of carbon dioxide (CO₂) emissions. This article investigates the role of fiscal policy, in addition to gross domestic product (GDP), innovation, and financial development, in mitigating CO₂ emissions in the context of the Environmental Kuznets Curve theory in the Group of Twenty (G20) countries from 1995 to 2019. The study implied the autoregressive distributed lag of pooled mean group (ARDL-PMG) approach to analyze the suggested model. The results revealed the validity of the model for the G20 countries, as well as a long-run cointegration between the study variables. The results also showed that fiscal policy is associated positively with CO₂ emissions. Hence, we recommend reconsidering the applied financial policy, redirecting it to support clean energy projects, provide incentives for projects combating environmental degradation, and relying on environmentally friendly energy. Full article

For the offshore wind turbines (OWTs) located in a seismically active region, the occurrence of earthquakes combined with scour is a highly possible multi-hazard event. This study developed an alternative fragility analysis framework to assess the seismic performance of suction bucket-supported OWTs under the action of scour. First, the probabilistic approach was applied to calculate the occurrence probability of scour depth (SD) and earthquake events. Then, the possible combinations of these two events were considered in the analysis model to establish the fragility surface of the suction bucket foundation. Finally, by integrating the product of scour and earthquake hazard, as well as fragility curves, the suction bucket foundation failure probability was obtained. The developed framework provides a reliable approach to risk assessment for OWT-supporting structures in extreme event situations and can be applied to other complex natural hazards. Full article

The development of a country’s economy is directly related to the use of energy in that country’s economic sectors. Therefore, the energy–environmental Kuznets curve (EEKC) is often used when analysing a country’s potential and challenges in sustainable development, green economy, and green growth. This hypothesis tests whether there is an inverse “U”-shaped relationship between energy use and economic growth and is especially important when analysing developing countries to assess if, at a certain point, energy use begins to drop, resulting in fewer greenhouse gas emissions, environmental degradation, and the consumption of fossil-based fuels. This study aims to examine the relationship between energy consumption and economic growth in the Baltic States from 1995 to 2019, with a focus on the agriculture sector. The study uses the non-linear autoregressive distributed lag (NARDL) model for individual and panel time series. Total energy use, as well as electricity use, is included in the study, whereas gross value added is employed as a measure of economic growth. Research data analysis reveals that energy use in all three Baltic countries stabilises as gross value added increases. However, there is insufficient evidence to show that after a certain point, energy use begins to drop; thus, the hypothesis for the inverse “U”-shaped energy–environmental Kuznets curve (EEKC) is rejected. Research results have important practical implications regarding countries’ policies toward energy, including the use of electricity and sustainable development. Full article

Artificial intelligence (AI) techniques are increasingly used to address problems in electricity systems that result from the growing supply of energy from dynamic renewable sources. Researchers have started experimenting with data-driven AI technologies to, amongst other uses, forecast energy usage, optimize cost-efficiency, monitor system health, and manage network congestion. These technologies are said to, on the one hand, empower consumers, increase transparency in pricing, and help maintain the affordability of electricity in the energy transition, while, on the other hand, they may decrease transparency, infringe on privacy, or lead to discrimination, to name a few concerns. One key concern is how AI will affect energy justice. Energy justice is a concept that has emerged predominantly in social science research to highlight that energy related decisions—in particular, as part of the energy transition—should produce just outcomes. The concept has been around for more than a decade, but research that investigates energy (in)justice in the context of digitalized and data-driven electricity systems is still rather scarce. In particular, there is a lack of scholarship focusing on the challenges and questions that arise from the use of AI technologies in the management of electricity systems. The central question of this paper is, therefore: what may be the implications of the use of AI in smart electricity systems from the perspective of energy justice, and what does this mean for the design and regulation of these technologies? Full article

Coloured building integrated photovoltaics (BIPVs) may contribute to meeting the decarbonisation targets of European and other countries. Nevertheless, their market uptake has been hindered by a lack of social acceptance, technical issues, and low economic profitability. Being able to assess in advance the influence of the coloured layers on a module’s power generation may help reduce the need for prototyping, thereby allowing optimisation of the product performance by reducing the time and costs of customised manufacturing. Therefore, this review aims at investigating the available literature on models and techniques used for assessing the influence of coloured layers on power generation in customised BIPV products. Existing models in the literature use two main approaches: (i) detailed optical modelling of the layers in the module’s stack, including coloured layers, and (ii) mathematical elaboration of the final product’s measured characteristics. Combining the two approaches can provide improved future models, which can accurately assess every single layer in the module’s stack starting from measured parameters obtained with simpler equipment and procedures. Full article

Recently, fuel cell combined heat and power systems (FC-CGSs) for residential applications have received increasing attention. The International Electrotechnical Commission has issued a technical specification (TS 62282-9-101) for environmental impact assessment procedures of FC-CGSs based on the life cycle assessment, which considers global warming during the utilization stage and abiotic depletion during the manufacturing stage. In proton exchange membrane fuel cells (PEMFCs), platinum (Pt) used in the catalyst layer is a major contributor to abiotic depletion, and Pt loading affects power generation performance. In the present study, based on TS 62282-9-101, we evaluated the environmental impact of a 700 W scale PEMFC-CGS considering cathode catalyst degradation. Through Pt dissolution and Ostwald ripening modeling, the electrochemical surface area transition of the Pt catalyst was calculated. As a result of the 10-year evaluation, the daily power generation of the PEMFC-CGS decreased by 11% to 26%, and the annual global warming value increased by 5% due to the increased use of grid electricity. In addition, when Pt loading was varied between 0.2 mg/cm² and 0.4 mg/cm², the 10-year global warming values were reduced by 6.5% to 7.8% compared to the case without a FC-CGS. Full article

In this study, the technoeconomic feasibility of bioenergy production from sawdust under four different case scenarios is simulated and compared. These scenarios include: (1) heat and electricity generation from raw sawdust; (2) pellet production from sawdust; (3) and (4) integrated biorefinery approach for the simultaneous manufacturing of multiple products (steam-exploded and torrefied pellets) and co-products (furfural, hydroxy methyl furfural (HMF), acetic acid), along with heat and electricity generation. Economic assessments such as cost analysis, payback time (PBT), net present value (NPV) and internal rate of return (IRR) were determined for these scenarios. The results showed that the approach of producing torrefied pellets, furfural, and acetic acid, along with co-generated heat and electricity, in terms of multiproducts and profitability (NPV (at 7%): USD 38.29 M) was preferable over other alternatives. In terms of simplified technology and other economic indices (PBT: 2.49 year, IRR: 51.33%, and return on investment (ROI): 40.1%), the scenario for producing pellets from wood sawdust was more promising than others. If plant capacity was not a limiting factor, the optimal size for the combined heat and power (CHP) plant was between 250–300 kt for the main product. Additionally, untreated and treated pellet plants equipped with CHP had an optimal size of 150–200 kt of wood pellets per year. Full article

This study entailed a load evaluation for the tower design of a large floating offshore wind turbine system in accordance with the wave conditions. The target model includes the IEA 15 MW reference wind turbine and a semi-submersible VolturnUS-S reference floating offshore wind turbine platform from the University of Maine. The OpenFAST, which is an aero-hydro-servo-elastic fully coupled analysis tool, was used for load analysis. The DLC1.2 and 1.6 were used as the design load cases, and the environmental conditions suitable for the design load cases were cited in the VolturnUS-S platform report. Load evaluation was performed according to time series and FFT results. The findings of the study are as follows: first, in the correlation analysis, the tower-top deflection had the highest correlation, and this further affects nacelle acceleration. Second, the tower-base pitch moment increased with the significant wave height. However, the wave peak period increased until it matched the tower-top deflection frequency and decreased thereafter. Third, the comparison between the normal and severe sea state conditions revealed that the tower-base pitch moments for the two conditions are almost similar, despite the conditions wherein the wave spectral energy differs by a factor of 3.5. Fourth, the tower shape is changed while adjusting the diameter of the tower, and the tower-top and tower-base pitch moments are reviewed using a redesigned tower. Even if the mass is the same, adjusting the diameter of the tower reduces only the pitch moment. Full article

This paper presents work on a wave energy device with an on-board power take-off based on a magnetostrictively actuated deformable structure. Such devices potentially could be used in low-cost, short-term expeditionary operations. The paper discusses an analytical model that describes the heave oscillations of a buoy with two inclined, overhanging beams with magnetostrictive strips affixed to them. This work comprises the first steps toward an analytical model that would enable potential users to obtain quick power estimates at the planning stage. Here, the fully nonlinear magneto-mechanical-electrical constitutive relations are linearized about a desirable operating point, and a coupled dynamic model is derived using a variational formulation that includes buoy heave, flexural oscillations of the two beams, and the voltage response of the magnetostrictive strips. Energy conversion performance in wind-sea-dominated Pierson–Moskowitz spectra is found to be modest. However, present results also indicate that performance could be improved with suitable mechanical modifications. Full article

Tidal stream turbines may operate under yawed conditions due to variability in ocean current directions. Insight into the wake structure of yawed turbines can be essential to ensure efficient tidal stream energy extraction, especially for turbine arrays where wake interactions emerge. We studied experimentally the effects of turbines operating under varying yaw conditions. Two scenarios, including a single turbine and a set of two turbines in alignment, were configured and compared. The turbine thrust force results confirmed that an increasing yaw angle results in a decrease in the turbine streamwise force and an increase in the turbine spanwise force. The velocity distribution from the single turbine scenario showed that the wake deflection and velocity deficit recovery rate increased at a rate proportional to the yaw angle. The two-turbine scenario results indicated that the deployment of an upstream non-yawed turbine significantly limited the downstream wake steering (i.e., the wake area behind the downstream turbine). Interestingly, a yawed downstream turbine was seen to influence the steering of both the upstream and the downstream wakes. These systematically derived data could be regarded as useful references for the numerical modelling and optimisation of large arrays. Full article

The concept of local energy communities is receiving increasing attention. However, the question of how to distribute the benefit of a community among its members is still open. It is commonly desired that the benefit distribution is fair and stable. While benefit distribution schemes such as the nucleolus, Shapley value and Shapley-core are known to perform well in terms of fairness and stability, studies have shown that none of them can guarantee full fairness and stability at the same time. However, the existing studies neglect the temporal component. Hence, in order to gain more insights into the stability and fairness of the three aforementioned distributions in practice, we investigate their performance over time in simulation experiments on real-world data from Australian households. In about 90% of the cases, the Shapley value yielded a reasonably stable distribution, while the nucleolus yielded a reasonably fair distribution in about 75% of the cases. Furthermore, the experiments show an impact of the community size on the stability and fairness of the investigated distributions. One can conclude that for small communities, the Shapley value is the best choice, but that the nucleolus and Shapley–core become more and more attractive with increasing size of the community. Full article

The stochastic nature of renewable energy resources and consumption has the potential to threaten the balance between generation and consumption as well as to cause instability in power systems. The microgrid operators (MGOs) are financially responsible for compensating for the imbalance of power within their portfolio. The imbalance of power can be supplied by rescheduling flexible resources or participating in the balancing market. This paper presents a robust optimization (RO)-based model to maintain the balance of a portfolio according to uncertainties in renewable power generation and consumption. Furthermore, load reduction (LR) and battery energy storage (BES) are considered flexible resources of the MGO on the consumption side. The model is formulated based on the minimax decision rule that determines the minimum cost of balancing based on the worst-case realizations of uncertain parameters. Through the strong duality theory and big-M theory, the proposed minimax model is transformed into a single-level linear maximization problem. The proposed model is tested on a six-node microgrid test system. The main contributions of the proposed model are presenting a robust model for portfolio management of MGO and using BES and LR to improve the flexibility of microgrid. Simulation results demonstrate that using LR and BES could decrease the balancing cost. However, the optimal portfolio management to compensate for the imbalance of power is highly dependent on the risk preferences of MGO. Full article

This paper studies the stability impact of the alternate voltage controller’s (AVC) low-pass filter (LPF) in a wind turbine’s grid-connected voltage source converter (VSC). A small-signal model of the grid-connected converter is designed with a grid-following synchronization control. More specifically, the non-linear state-space model of the grid-connected converter was developed, including the dynamics of both the inner and outer control loops of the converter, the dynamics of the elements of the electrical system, as well as the digital time delay. An eigenvalue-based stability analysis gives insight into the stability impacts of the outer-loop controllers. It is proven that the cutoff frequency of the AVC’s LPF affects the phase-locked loop (PLL) and AVC bandwidths of instability, as well as the corresponding critical oscillation frequencies. This phenomenon is observed in both weak and strong grids. Consequently, the small-signal stability regions of the PLL and AVC bandwidth can be identified for the range of the AVC’s LPF cutoff frequency under study. The stability regions of the PLL and AVC, which are obtained from the small-signal model, as well as the determined critical oscillation frequencies, are validated through time domain simulations and fast-Fourier transformation (FFT) analysis. Full article

Although partial discharge (PD) measurement is a well-accepted technology to assess the quality of the insulation system of power transformers, there are still uncertainties about which frequency range PDs radiate and which frequency range should be evaluated in a measurement. This paper discusses both a UHF PD frequency range obtained from studies investigating laboratory experiments and a frequency range from numerous practical use cases with online and on-site measurements. The literature review reveals a frequency spectrum of ultrahigh-frequency (UHF) PD measurements in the range of 200 MHz to 1 GHz for most publications. Newer publications extend this range from 3 to 6 GHz. The use cases present UHF PD measurements at transformers with power ratings up to 1000 MVA to determine frequency ranges which are considered effective for practical applications. The “common” frequency range, where measurements from all use cases provide signal power, is from approximately 400 MHz to 900 MHz, but it is noted that the individual frequency range, as well as the peak UHF signal power, strongly varies from case to case. We conclude from the discussed laboratory experiments and practical observations that UHF PD measurements in power transformers using either valve or window antennas, according to Cigré, are feasible methods to detect PD. Full article

Firewood stoves are widespread and popular for renewable heat supply in Europe. Several new technological measures have been developed recently that aim at improving the appliance performance in terms of emissions and efficiency. In order to support the trend towards “(nearly) zero-emissions technologies”, the objective of this study was to provide a profound overview of the most relevant technical primary and secondary measures for emission reduction and to analyze their functionality, the relevant framework conditions for their application and their costs. Since user behavior is essential for emission and efficiency performance, the state of knowledge about user behavior is summarized and the latest measures for its optimization are evaluated as non-technical primary measures. Primary and secondary measures were analyzed separately, but also potentially promising combinations of primary and secondary optimization were evaluated using SWOT analysis. The results showed that complementary application of primary and secondary measures will be necessary in order to achieve “(nearly) zero-emission technologies”. The paper is useful for manufacturers and provides them with guidance and recommendations for future developments. They can specifically select appropriate measures for their products and applications not only based on technical aspects, but also with a strong focus on user behavior and user comfort. Full article

Solar heating and cooling (SHC) systems are currently attracting attention, especially in times of increasing energy prices and supply crises. In times of lower energy prices, absorption SHC systems were not competitive to compression cooling supported by photovoltaic (PV) modules due to the high investment costs and total energy efficiency. This paper aims to discuss the current changes in energy supply and energy prices in terms of the feasibility of the application of a small absorption SHC system in a mild Mediterranean climate. The existing hospital complex restaurant SHC system with evacuated tube solar collectors and a small single-stage absorption chiller was used as a reference system for extended analysis. Dynamic simulation models based on solar thermal collectors, PV modules, absorption chillers and air-to-water heat pumps were developed for reliable research and system comparison. The results showed that primary energy consumption in SHC systems designed to cover base energy load strongly depends on the additional energy source, e.g., boiler or heat pump. Absorption SHC systems can be price competitive to air-to-water heat pump (AWHP) systems with PV collectors only in the case of reduced investment costs and increased electricity price. To reach acceptable economic viability of the absorption SHC system, investment price should be at least equal to or lower than a comparable AWHP system. Full article

Many attempts are made worldwide to create cheap, efficient, and eco-friendly water desalination systems. Passive solar stills (SS) are considered to be such. This paper presents the results of the experimental and theoretical investigation of the effects of using phase-change materials (PCM) on the performance of SS. The experiments were conducted for two paraffin waxes, as PCM and 1.0, 2.5, and 5.0 kg of PCM were used. The results of the experimental studies were used to validate a mathematical model, which was based on the energy balance ordinary differential equations. The equations were solved numerically since the approximate solutions obtained numerically are sufficient and relatively simple as compared to the exact analytical solutions. A theoretical analysis was then carried out and a novel and detailed dependence on the water evaporation rate as a function of water temperature and the difference between water and cover temperature was determined. It was also found that the productivity of the SS with PCM strongly depends on the operating conditions. For uniform initial temperatures of the SS, its productivity decreases with an increasing PCM-to-water mass ratio, and the maximum decrease is 10.8%. If the SS is not thermally insulated, the PCM can take the role of a thermal insulator and increase productivity by 1.1%, but there is an optimal PCM-to-water mass ratio. The greatest increase in productivity, by up to 47.1%, can be obtained when the PCM is heated outside the SS and inserted into the SS when the water temperature starts to decrease. In this case, the productivity increases with the increasing PCM-to-water mass ratio. These outcomes fill a knowledge gap caused by a lack of justification for why in some cases, the application of PCM fails to improve the productivity of SS. Full article

In recent years, there has been a significant increase in investment in renewable energy sources, leading to the decarbonization of the electricity sector. Accordingly, a key concern is the influence of this process on future electricity market prices, which are expected to decrease with the increasing generation of renewable power. This is important for both current and future investors, as it can affect profitability. To address these concerns, a long-term analysis is proposed here to examine the influence of the future electricity mix on Iberian electricity prices in 2030. In this study, we employed artificial intelligence forecasting models that incorporated the main electricity price-driven components of MIBEL, providing accurate predictions for the real operation of the market. These can be extrapolated into the future to predict electricity prices in a scenario with high renewable power penetration. The results, obtained considering a framework featuring an increase in the penetration of renewables into MIBEL of up to 80% in 2030, showed that electricity prices are expected to decrease by around 50% in 2030 when compared to 2019, and there will be a new pattern of electricity prices throughout the year due to the uneven distribution of renewable electricity. The study’s findings are relevant for ongoing research on the unique challenges of energy markets with high levels of renewable generation. Full article

Hydrogen is expected to play an important role in renewable power storage and the decarbonization of the power sector. In order to clarify the environmental impacts of power regenerated through hydrogen-fueled gas turbines, this work details a life cycle model of the greenhouse gas (GHG) and NOx emissions of the power regenerated by power-to-H₂-to-power (PHP) technology integrated with a combined cycle gas turbine (CCGT). This work evaluates the influences of several variables on the life cycle of GHG and NOx emissions, including renewable power sources, hydrogen production efficiency, net CCGT efficiency, equivalent operating hours (EOH), and plant scale. The results show that renewable power sources, net CCGT efficiency, and hydrogen production efficiency are the dominant variables, while EOH and plant scale are the minor factors. The results point out the direction for performance improvement in the future. This work also quantifies the life cycle of GHG and NOx emissions of power regenerated under current and future scenarios. For hydro, photovoltaic (PV) and wind power, the life cycle of the GHG emissions of regenerated power varies from 8.8 to 366.1 g_CO2e/kWh and that of NOx emissions varies from 0.06 to 2.29 g/kWh. The power regenerated from hydro and wind power always has significant advantages over coal and gas power in terms of GHG and NOx emissions. The power regenerated from PV power has a small advantage over gas power in terms of GHG emissions, but does not have advantages regarding NOx emissions. Preference should be given to storing hydro and wind power, followed by PV power. For biomass power with or without CO₂ capture and storage (CCS), the life cycle of the GHG emissions of regenerated power ranges from 555.2 to 653.5 and from −2385.0 to −1814.4, respectively, in g_CO2e/kWh; meanwhile, the life cycle of NOx emissions ranges from 1.61 to 4.65 g/kWh, being greater than that of coal and gas power. Biomass power with CCS is the only power resource that can achieve a negative life cycle for GHG emissions. This work reveals that hydrogen-fueled gas turbines are an important, environmentally friendly technology. It also helps in decision making for grid operation and management. Full article