The authors wish to make the following erratum to this paper [1].
Funding and Acknowledgement are incorrect and must be replaced by the following Funding and Acknowledgments:
Funding: This research was funded by the São Paulo Research Foundation (FAPESP), grant number #2018/07292-0, Coordination of Superior Level Staff Improvement (CAPES) and National Council for Scientific and Technological Development (CNPQ), under grant 306435/2017-9 for supporting this research work.
Acknowledgments: The authors are grateful to the São Paulo Research Foundation–FAPESP, Coordination of Superior Level Staff Improvement—CAPES and National Council for Scientific and Technological Development—CNPQ for financial support.
The authors would like to apologize for any inconvenience caused to the readers by these changes.
Reference
- Aulestia Viera, M.A.; Aguiar, P.R.; Oliveira Junior, P.; Alexandre, F.A.; Lopes, W.N.; Bianchi, E.C.; da Silva, R.B.; D’addona, D.; Andreoli, A. A Time–Frequency Acoustic Emission-Based Technique to Assess Workpiece Surface Quality in Ceramic Grinding with PZT Transducer. Sensors 2019, 19, 3913. [Google Scholar] [CrossRef] [PubMed]
© 2020 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).