Next Article in Journal
Correction: Falck, R. et al. Microstructure and Mechanical Performance of Additively Manufactured Aluminum 2024-T3/Acrylonitrile Butadiene Styrene Hybrid Joints by AddJoining Technique. Materials 2019, 12, 864
Next Article in Special Issue
Effects of Temperature on Fluidity and Early Expansion Characteristics of Cement Asphalt Mortar
Previous Article in Journal
Requirements and Variability Affecting the Durability of Bonded Joints
Previous Article in Special Issue
Inventive Microstructural and Durability Investigation of Cementitious Composites Involving Crystalline Waterproofing Admixtures and Portland Limestone Cement
 
 
Article

Article Versions Notes

Materials 2020, 13(6), 1467; https://doi.org/10.3390/ma13061467
Action Date Notes Link
article xml file uploaded 23 March 2020 16:54 CET Original file -
article pdf uploaded. 23 March 2020 16:54 CET Version of Record https://www.mdpi.com/1996-1944/13/6/1467/pdf-vor
article xml file uploaded 25 March 2020 08:42 CET Update -
article xml uploaded. 25 March 2020 08:42 CET Update https://www.mdpi.com/1996-1944/13/6/1467/xml
article pdf uploaded. 25 March 2020 08:42 CET Updated version of record https://www.mdpi.com/1996-1944/13/6/1467/pdf
article html file updated 25 March 2020 08:43 CET Original file -
article html file updated 2 April 2020 07:15 CEST Update -
article html file updated 20 July 2022 23:47 CEST Update https://www.mdpi.com/1996-1944/13/6/1467/html
Back to TopTop