Next Article in Journal
Process Development for Flexible Films of Industrial Cellulose Pulp Using Superbase Ionic Liquids
Next Article in Special Issue
Effect of Printing Parameters on the Tensile Properties of 3D-Printed Polylactic Acid (PLA) Based on Fused Deposition Modeling
Previous Article in Journal
Analysis and Simulation of Polymer Injectivity Test in a High Temperature High Salinity Carbonate Reservoir
Previous Article in Special Issue
Optimisation of Strength Properties of FDM Printed Parts—A Critical Review
 
 
Article

Article Versions Notes

Polymers 2021, 13(11), 1766; https://doi.org/10.3390/polym13111766
Action Date Notes Link
article pdf uploaded. 27 May 2021 19:28 CEST Version of Record https://www.mdpi.com/2073-4360/13/11/1766/pdf-vor
article xml file uploaded 9 June 2021 07:52 CEST Original file -
article xml uploaded. 9 June 2021 07:52 CEST Update https://www.mdpi.com/2073-4360/13/11/1766/xml
article pdf uploaded. 9 June 2021 07:52 CEST Updated version of record https://www.mdpi.com/2073-4360/13/11/1766/pdf
article html file updated 9 June 2021 07:54 CEST Original file -
article html file updated 9 June 2021 09:58 CEST Update -
article html file updated 26 July 2022 21:42 CEST Update https://www.mdpi.com/2073-4360/13/11/1766/html
Back to TopTop