Next Article in Journal
Effects of the Temperature–Time Regime of Curing of Composite Patch on Repair Process Efficiency
Next Article in Special Issue
Influence of Thermal Annealing Temperatures on Powder Mould Effectiveness to Avoid Deformations in ABS and PLA 3D-Printed Parts
Previous Article in Journal
The Influence of Decontamination Procedures on the Surface of Two Polymeric Liners Used in Prosthodontics
Previous Article in Special Issue
Tuning the 3D Printability and Thermomechanical Properties of Radiation Shields
 
 
Article

Article Versions Notes

Polymers 2021, 13(24), 4341; https://doi.org/10.3390/polym13244341
Action Date Notes Link
article xml file uploaded 11 December 2021 11:13 CET Original file -
article xml uploaded. 11 December 2021 11:13 CET Update https://www.mdpi.com/2073-4360/13/24/4341/xml
article pdf uploaded. 11 December 2021 11:13 CET Version of Record https://www.mdpi.com/2073-4360/13/24/4341/pdf
article html file updated 11 December 2021 11:15 CET Original file -
article html file updated 30 July 2022 21:46 CEST Update https://www.mdpi.com/2073-4360/13/24/4341/html
Back to TopTop