Correction: Dong et al. FE Model Updating of Continuous Beam Bridge Based on Response Surface Method. Buildings 2024, 14, 960
Reference
- Dong, F.; Shi, Z.; Zhong, R.; Jin, N. FE Model Updating of Continuous Beam Bridge Based on Response Surface Method. Buildings 2024, 14, 960. [Google Scholar] [CrossRef]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content. |
© 2024 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).
Share and Cite
Dong, F.; Shi, Z.; Zhong, R.; Jin, N. Correction: Dong et al. FE Model Updating of Continuous Beam Bridge Based on Response Surface Method. Buildings 2024, 14, 960. Buildings 2024, 14, 2642. https://doi.org/10.3390/buildings14092642
Dong F, Shi Z, Zhong R, Jin N. Correction: Dong et al. FE Model Updating of Continuous Beam Bridge Based on Response Surface Method. Buildings 2024, 14, 960. Buildings. 2024; 14(9):2642. https://doi.org/10.3390/buildings14092642
Chicago/Turabian StyleDong, Fang, Zhongqi Shi, Rumian Zhong, and Nan Jin. 2024. "Correction: Dong et al. FE Model Updating of Continuous Beam Bridge Based on Response Surface Method. Buildings 2024, 14, 960" Buildings 14, no. 9: 2642. https://doi.org/10.3390/buildings14092642