Next Article in Journal
A Comprehensive Approach of Eucalyptus globulus Acid Sulfite Pretreatment for Enzymatic Hydrolysis
Next Article in Special Issue
Radical Depolymerization of Alginate Extracted from Moroccan Brown Seaweed Bifurcaria bifurcata
Previous Article in Journal
Mechanical System and Template-Matching-Based Position-Measuring Method for Automatic Spool Positioning and Loading in Welding Wire Winding
Previous Article in Special Issue
Marine Microalgae Biomolecules and Their Adhesion Capacity to Salmonella enterica sv. Typhimurium
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Applied Sciences
Volume 10
Issue 11
10.3390/app10113763
applsci-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Review

Exopolysaccharides from Cyanobacteria: Strategies for Bioprocess Development

by
Diogo Cruz
1,2,
Vitor Vasconcelos
1,2,*,
Guillaume Pierre
3,
Philippe Michaud
3 and
Cédric Delattre
3,4
1
Faculty of Sciences, University of Porto, Rua do Campo Alegre, 4169-007 Porto, Portugal
2
Interdisciplinary Center of Marine and Environmental Research (CIIMAR/CIMAR), University of Porto, Terminal de Cruzeiros do Porto de Leixões, Avenida General Norton de Matos, S/N, 4450-208 Matosinhos, Portugal
3
Université Clermont Auvergne, CNRS, SIGMA Clermont, Institut Pascal, F-63000 Clermont-Ferrand, France
4
Institut Universitaire de France (IUF), 1 rue Descartes Paris, 75005 Paris, France
*
Author to whom correspondence should be addressed.
Appl. Sci. 2020, 10(11), 3763; https://doi.org/10.3390/app10113763
Submission received: 20 April 2020 / Revised: 25 May 2020 / Accepted: 27 May 2020 / Published: 29 May 2020
(This article belongs to the Special Issue Polysaccharides from Marine Environments)
Browse Figure
Versions Notes

Abstract

:
Cyanobacteria have the potential to become an industrially sustainable source of functional biopolymers. Their exopolysaccharides (EPS) harbor chemical complexity, which predicts bioactive potential. Although some are reported to excrete conspicuous amounts of polysaccharides, others are still to be discovered. The production of this strain-specific trait can promote carbon neutrality while its intrinsic location can potentially reduce downstream processing costs. To develop an EPS cyanobacterial bioprocess (Cyano-EPS) three steps were explored: the selection of the cyanobacterial host; optimization of production parameters; downstream processing. Studying the production parameters allow us to understand and optimize their response in terms of growth and EPS production though many times it was found divergent. Although the extraction of EPS can be achieved with a certain degree of simplicity, the purification and isolation steps demand experience. In this review, we gathered relevant research on EPS with a focus on bioprocess development. Challenges and strategies to overcome possible drawbacks are highlighted.

1. Introduction

Polysaccharides are complex polymeric carbohydrates that have a huge impact on the industry as hydrocolloids, bio-sourced materials, biological agents, among others [1]. These biopolymers are often used as raw materials in many industries and have a chemical diversity that can go from linear homopolymers to 3D structures of heteropolymers. The majority of commercialized polysaccharides are extracted from plants, seaweeds, and microorganisms [2]. Polysaccharides excreted from microbial sources hold a wide range of functionalities and are highlighted for easier downstream when compared to other natural sources [2,3]; however, the costs of production, mainly for carbon source, constant oxygenation, and intense energy demand, limit the generalized application of these technology [4]. Eco-friendlier cellular factories such as phototrophic organisms have been highlighted to raise the sustainability of the whole bioprocess [5]. Cyanobacteria can be light-powered, consume inorganic carbon to produce oxygen, and even fix nitrogen under diazotrophic conditions [6]. They are widely known for being rich in protein and a prolific source of secondary metabolites [7]. Nonetheless, their relative low carbohydrate content can be over-exceeded in the forms of sugars and polysaccharides when another relevant nutrient is missing for the production of proteins, nucleic acids, and other biomolecules. This is commonly defined as photosynthesis “carbon overflow” and is similar to lipid accumulation in microalgae [8]. When produced in considerable amounts, the extracellular polysaccharides or exopolysaccharides (EPS) can be combined with proteins (proteoglycans) and lipids (glycolipids) [9]. There is no current consensus in regards to EPS classification in cyanobacteria [10]. Though many authors agree they should be classified into two main groups according to their location: (1) cell-bound polysaccharides (CPS) comprising slime, sheaths, and “capsular”; (2) released polysaccharides (RPS) [4]. A rule of thumb EPS from cyanobacteria are heteropolysaccharides of anionic nature due to uronic acids and are soaked in neutral sugars. In a nutshell, cyanobacterial EPS holds higher complexity among microbes [6]. Physico-chemical properties of cyanobacterial EPS have shown promising performances suitable for the industry as gums, bioflocculants, soil conditioners, biolubrificants, and biosorbents [11,12,13]. The presence of non-carbohydrate substituents is proven to act as biological weapons, showing anti-viral, anti-microbial, anti-tumoral activity [14,15,16,17]. Their potential has been already explored as drug delivery technology [18,19].
Cyanobacterial EPS, from the bioprocess point of view, is seen as a by-product of biomass and/or metabolite production such as proteins and to a lesser extent lipid [10]. The slimy texture of culture medium after EPS production hinders handling while structure elucidation and productivities gave a tough reputation to these classes of polysaccharides within the industrial sector; however, the uniqueness of the few resolved structures has opened markets to these polysaccharides.
The overlooked research of cyanobacterial EPS is dominated by their generic production and extraction which is then used to provide insights on EPS partial characterization, physico-chemical, and/or bioactive properties [10]. There is a lot of anticipation regarding their application as metal bioremediation [20] and soil restoration [21]; however, this review is focused on the bioprocess development, for wild type strains in particular. Within this scope, we approached the EPS cyanobacterial in terms of their chemical-diversity and what techniques were used for strain selection and EPS production. Main developments and strategies are outlined and proposed, respectively.

2. EPS from Cyanobacteria

2.1. Ecology

Cyanobacteria are a very diverse taxonomic group that can be found both in unicellular or multicellular forms of coccoid and/or filamentous [7]. These prokaryotic organisms have a bacterial like cellular envelope. They are structurally similar to Gram-negative bacteria, although some features and thickness of peptidoglycan resemble Gram-positive bacteria. In nature, cyanobacterial EPS can play a variety of functions such as adhesive, structural, protection against abiotic stress, bio weathering processes, gliding motility, and nutrient repositories in phototrophic biofilms or biological soil crusts [22,23,24]. The excretion of EPS, and in particular CPS, can occur via a junctional pore complex (JPC). The quantity and compactness of carbohydrates can help to sort the different types of CPS. Sheaths and capsules are more compact which aim to protect the cellular environment, from abiotic or biotic stresses, while the slime excretions are less compact and allow the cyanobacteria to have gliding motility. Some CPS may also contain aromatic pigments, like scytonemin or oligosaccharide mycosporine-like amino acids. These molecules which absorb UV light can be found in cyanobacteria located in highly exposed sunlight areas [25]. Interestingly, the RPS fraction is less noted in nature, whereas only under laboratory conditions can be easily detected and quantified [26].

2.2. Chemodiversity

The EPS in cyanobacteria is part of a complex network of extra polymeric substances, and it can also comprise proteins, nucleic acids, lipids, and secondary metabolites [10]. More than 13 different monosaccharides have been identified from C5 to C6 and underpinned on 40–50 glycosidic bonds tightly correlated to polysaccharide flexibility [9]. Glucose is the most common monosaccharide, however, some EPS strains were found to contain other dominant monosaccharides such as rhamnose, xylose, arabinose, fucose, mannose, and uronic acids [27]. The latter have an exclusive presence in the cyanobacteria, being identified with a frequency of one or two units. Structurally monosaccharides can be grouped by their form: hexoses (glucose, galactose, mannose, and fructose); pentoses (ribose, xylose, and arabinose); deoxyhexoses (fucose, rhamnose, and methyl rhamnose); acidic hexoses (glucuronic and galacturonic acid). The EPS of Arthrospira platensis strain MMG-9 exhibited rich EPS diversity, the CPS fraction the most diverse (fucose, galactose, glucose, mannose, rhamnose, ribose, and xylose) [28]. Methyl, pyruvyl, and succinyl groups can be present as well as sulfate groups, which are only found in archaea and eukaryotes. Additional types of monosaccharides such as N-acetyl glucosamine, 2,3-O-methyl rhamnose, 3-O-methyl rhamnose, 4-O-methyl rhamnose, and 3-O-methyl glucose are also reported [29,30]. At the macromolecular scale, these polymers are characterized by high molecular weight, which can range from kDa to MDa, whereas more than 75% of those characterized are heteropolymers [6]. The physico-chemical role of these building blocks is extremely rich. Although some exhibit hydrophobic character, which promotes adhesion to solid surfaces, others exhibit hydrophilic character sticking to minerals, nutrients, and water molecules. Notwithstanding, the combination of both moieties can promote an amphiphilic character allowing cyanobacteria to react in different ways to the surrounding environment [30]. Cyanoflan, an RPS isolated from the marine Cyanothece sp. PCC 0010 has a high intrinsic viscosity and emulsifying activity in aqueous solutions [31]. Cyanobacteria constitute a prolific source of EPSs with physico-chemical properties. As a consequence of these natural complexities, a pitfall for structural elucidation burdens the number of available structures [9]. Non-exhaustive data are shown in Table 1.

3. Cyanobacterial Bioprocess (Cyano-EPS) Development

3.1. Strain Selection

The classical approach to bioprospecting an exemplar cyanobacterial EPS producer starts by looking at the growth rate and EPS content, to determine product titer and productivity. Cyanobacteria physiology is diverse and translates into a much wider strain-specific response to the stimulus applied during cultivation. Cultivation screenings can be a useful tool to compare the performance of different strains within a predefined environment. A compilation of cultivation screenings in cyanobacteria is presented in Table 2. Despite the diversity of habitats, we can observe that the same does not happen to the orders of strains studied. Most of the reports were done on Nostocales and Oscillatoriales orders, whereas the majority of tested organisms per study were from the Nostoc genus. In addition, the EPS fraction to be recovered varied among screenings to the methodologies applied. A study on forty Nostoc strains from Pasteur Culture Collection isolated from different habitats (soil, soil/water, water, and plant symbiosis), showing that the RPS production was not related to the habitat nor the morphology of the outermost investments. Still, PCC 7413, 8109, and 6720 were identified as the most productive strains 47, 30, and 28 mg/L/day respectively [40]. Moreover, a more comprehensive screening was recently performed in 166 marine algal strains, though only 16 were cyanobacteria. Despite the low number of cyanobacterial strains, the study comprised strains from five different orders some of them evaluated the EPS production potential for the first time. The authors opted to use the culture medium from the culture collection, which is often complex and used for maintenance; however, the screening conducted at 20 °C and 150 μE revealed Synechococcus sp. as a potential RPS producer (0.12 g/L) [41].
The cultivation screenings were characterized as being too long (30 days). This is explained by the cyanobacteria slow growth rate and also to EPS production associated with the stationary phase [10]. A dilution of N:P in BG11 to a factor of 7 was shown to anticipate the stationary phase in cultures of Microcystis aeruginosa and stationary phase characteristic EPS production was also observed under these conditions [42]. It is important to understand which is the cyanobacteria’s physiological state throughout time and especially to define the period of highest EPS production. Although it is more relevant at the optimization stage, it can be used as a cut-off parameter. Applying a shorter production time (15 days) on four Cyanothece sp. strains from seawater in China’s coast grown on modified f/2 with the addition of sea mud extract, aeration, and relatively strong inoculum for a small volume of cultivation was sufficient to highlight Cyanothece 113 producing abundant quantities of a CPS (α-d-1,6-glucan).
The cyanobacteria inoculum quality (age and concentration) determines the period of acclimation, thus a lag phase in response to the transition of conditions was applied. The number of cells inoculated should be based on the steady-state of each strain, however, this methodology requires the previous knowledge of each strain’s growth curve. The EPS screening studies have rarely provided information of inoculum, though some inoculated according to a determined concentration in terms of the number of cells, the mass of cells, chlorophyll a or even just a percentage. The culture medium provides the required nutrients for cyanobacterial growth, despite the existent formulations BG11 and BG110 (absence of nitrate source) were often applied. BG110 is used for nitrogen-fixing strains mostly from Nostocales order. Under diazotrophic conditions, growth is limited and the metabolism is re-directed towards nitrogen fixation with specialized cells and EPS production favored, namely CPS [40]. With respect to culture medium water sources, few studies have successfully applied seawater and other environmental resources to simulate habitats conditions and stimulate EPS production.
Light in the photoautotrophic metabolism is the energy provider for the cyanobacterial growth and it can be characterized in terms of light intensity (μE), light / dark cycles (L/Dh), and light quality. From Table 2, we can observe a heterogeneity of light conditions applied, while the majority opted for continuous illumination with low or high light intensity others opted for a balanced L/D cycle. No screening using other light sources such as natural light, different light qualities (monochrome) conditions were found. Temperature is a determinant factor for enzymatic activity and thus metabolism propeller. Cyanobacteria can be characterized by their adaptability to temperature as psychrophiles (below 15 °C), mesophiles, and thermophiles (above 40 °C). Very few studied strains belonging to the extremes of this classification, though they could have interesting industrial applications depending on the geographic location. Nonetheless the majority of studies applied constant temperature values within the mesophile range. In addition, no tests on temperature fluctuations were found. EPS production is known to affect the culture medium rheology; thus it is important to control the homogeneity of the cyanobacterial cultures in particular nutrients and pH. Culture mixing and/or aeration (air) were applied by the majority of the studies, though less often a CO2–air mixture was intentionally applied to control pH. The volume of cultivation used varied along with studies (0.01–2 L) whereas it reduces the comparison between results; however, one study at the microplate level revealed a novel way to screen EPS production in 880 microalgal strains by correlating culture medium viscosity with sugar content. An overproducing bacterial strain was found in non-axenic Mycrocistis aeruginosa f. flos-aquae culture [43].

3.2. Production and Optimization

Even though strain selection can anticipate the success of the whole bioprocess development the performance will always need to be ameliorated. At this step, it will be determined how much product can the cell produce in a determined volume per period of time, i.e., productivity. Consequently, the moment that the cell produces the highest amount of EPS and/or how long it takes to achieve will determine the strategy applied [55]. With respect to stress conditions applied to cyanobacterial strains nitrogen, salinity, and light are reported as the most frequent inducers of EPS production. Single parameter optimization has been extensively applied to optimize EPS production, see Table 3. As observed in strain selection, Nostocales and Oscillatoriales are among the most studied orders.

3.2.1. Culture Medium

Culture medium optimization has a very important role in the economic feasibility of a bioprocess as well as to highlight and fine-tune the presence of certain nutrients. The combined presence of nitrogen in Cyanothece sp. CCY 0110 was able to improve RPS production (1.8 g/L) [56]. Although the highest levels of EPS on Nostoc sp. BTA97 and Anabaena sp. BTA990 were obtained in the absence of any combined nitrogen source [47]. The most common source of nitrogen used is NaNO3 [57,58], though KNO3 [59,60] has also shown a positive correlation with EPS production. Interestingly, among the four different sources of nitrogen, urea promoted the highest amount of RPS in Nostoc flagelliforme [61]. The absence of inorganic nitrogen, i.e., diazotrophic conditions, was reported to influence positively the production of EPS in certain heterocystous forming [62,63,64] and unicellular species [65].
The inorganic carbon source most commonly used is CO2 (0.05–10% v/v) combined with air and used to control pH on demand. NaHCO3 was found to positively influence EPS production in Arthropira platensis while at the same time it also promoted bioflocculation with almost 90% of harvest efficiency [66]. Some authors have evaluated the effect of using organic carbon sources. The use of glucose to induce mixotrophic growth on Nostoc flagelliforme was not found to increase EPS production [58,67]. Contrarily, a kinetics study on Arthrospira platensis tested in photoautotrophic, heterotrophic, and mixotrophic mode attained 290 mg/L of EPS in the presence of combined glucose and light [68].
The species Cyanothece sp. grown at very high salinities (70 g/L NaCl) was able to attain an EPS titer, namely CPS, of 22.34 g/L [33]. The increased EPS production, namely CPS fraction, on the freshwater Synechococcus under different salinities was shown to promote osmotic cellular balance. Cell-cycle phase duration was shown to be increased and thus a slowdown on growth rate was noted at higher salinities. Conversely, salinity stress marked an increase in EPS production [69]. Many authors reported the enhanced production of EPS through NaCl stress [46,52,60,62,67], though others reported no significant effect [54,56,59] or even its absence became beneficial [70].
Micronutrients such as MgSO4 [46,62], K2PHO4 [54,57], and CaCl2 [60] have been shown to produce significant effects on EPS, while no effect was found for MgCl2 or NaH2PO4 [56,65]. A less common stress applied in Cyanothece epiphytica was the exposure to ozone for 50 s at 0.06 mg/L resulting in a relatively high EPS yield. The EPS produced showed biolubrificant potential, while the effect of ozone did not provoke any damage to cell structure [62].

3.2.2. Process Conditions

Process conditions and respective control are important to assure the reproducibility and feasibility of the bioprocess. Nevertheless, these settings can possibly influence the desired outcome of the process.
Cyanobacteria can grow in pH ranging from 6–12, while the initial pH was shown to affect the number of EPS produced [47,48]. CO2 is thought to increase EPS production in planktonic cyanobacteria [71]. Setting a pH range to control the cultivation period either through injection of CO2 or the use of acid/basic solutions avoids the limitation of growth before light, which is the ultimate limiting factor for photoautotrophic cultures like cyanobacteria [49,53,54,70,72].
The growth rate of cyanobacteria has been observed to increase with shear stress, probably by promoting orientation and increasing the contact area of the microorganisms and nutrients [73,74]. For the Cyano-EPS a certain degree of shear stress will be necessary once the rheology of the medium is altered and the mass and gas transfers become less efficient throughout the time. The evolution of culture medium rheology combined with shear stress highly affects the bacterial EPS production at the industrial scale [55]; however, reports have shown a variety of shear stress applied most of the times by default, single aeration [33,58] or agitation [47,59,60,69], aeration with CO2 supplementation [53,54,64,70,75,76], simultaneous aeration, and agitation [49,56,57]. Optimization studies demonstrated a low number of reports studying the effect of shear stress on EPS production [54,56,65,70], whereas the majority of them found it highly relevant.
Temperature is also reported to have a positive effect on growth and EPS production [56,57,65,70], though others have reported a dissimilitude [75,76]. When combining the effect of temperature and light intensity the settings for EPS enhancement are antagonists [75]. A petri dish work using crossed gradients of temperature and light intensity have found the optimal range for growth and EPS for Scytonema tolypothrichoides and Tolypothrix bouteillei. These two strains from the same microhabitat had different light and temperature optima, supporting, even more, the strain specificity on Cyano-EPS control. Moreover, the temperature was shown to be the most significant parameter [77].
Light/Dark (L/D) cycles highly affected the production of insoluble carbohydrates per cell [78]. The optimization studies found positive correlation by applying L/D cycles [54,56,60,64], while continuous illumination was found favorable for EPS production in Anabaena genus [54].
Much work has been done on Nostoc flagelliforme [11,61,63,79,80,81,82,83,84]. This strain is an edible terrestrial cyanobacterium that is used as food in China for more than 2000 years. The EPS from N. flagelliforme are reported to be bioactive and possess interesting physico-chemical properties. Light quality experiments have shown that N. flagelliforme has a higher growth rate and EPS production under monochromatic light, namely red and blue light when compared to white light [79,80]. However, no relationship between monosaccharidic composition and the quality of light applied was found [80]. The same was found for another Nostoc sp. [85]. Culture medium optimization was found to enhance the antioxidant activity of CPS fraction [67]. Different light intensities of red light induced photoinhibition which possibly stimulated the protection of the cell by the production of EPS, namely CPS [80]. Optimization of carbon, nitrogen source, and light quality reinforced the fact that growth and EPS have their own requirements. In addition, these culture conditions also affected the EPS-associated enzymes, showing a correlation with the number of EPS produced [63]. More recently, a transcriptomic analysis revealed that light quality regulated EPS biosynthesis via the intracellular reactive oxygen species (ROS) level directly other than oxidative stress of N. flagelliforme [83].
Meta-bibliographic research was conducted to infer which were the cultivation factors that most influence the EPS and glycogen production in Arthropira platensis. The results showed a considerable heterogeneity of authors’ results explained by different operating conditions and extraction/purification methodologies applied. The authors found light intensity as the most preponderant factor in their desk-research and experimented with different light intensities (100, 400, 800, and 1200 μE). The ratio EPS/glycogen was found higher with lower light intensities. In addition, EPS monosaccharides composition was significantly different among different light intensities applied [86].
For those cases, where there was no correlation between growth and RPS production, a two-stage cultivation might be the most appropriate way to attain high biomass and then obtain a higher amount of the RPS at a second stage. This was already suggested in [51]. Playing with intensities of multiple wavelengths (red, blue, and green) and nitrogen source a strategy was defined and an increase in 66% and 217.3% in N. flagelliforme growth an RPS production was attained, respectively. The growth phase was set with white light for nine days while the EPS phase was followed by nine days of mixed wavelength (red/blue/green = 12:5:5) using urea as a nitrogen source [61]. The use of light as a way to control the production of cyanobacterial products has already been reported [87,88]. Moreover, lower light intensity was also utilized as a strategy to increase EPS production [61,89]. Arthrospira sp. was grown in two-stage cultivation wherein biomass production (Zarrouk medium, 30 °C, 80 µE) was favored at first. Secondly, the combined effect of light intensity and salinity (NaCl) was found antagonistic on EPS enhancement. Optimal conditions were found (10 µE and 39 g/L of NaCl) allowing EPS production to have a 1.67-fold increase when compared to optima growth conditions [89].
Applying outdoor cultivation systems can potentially reduce production costs by reducing light and temperature control [62,90,91,92]. Relevance was found in an outdoor pilot scale cultivation of Spirulina sp. LEB-18 on 250 L of open raceways in the summer of Salvador, Bahia, Brazil. The crude RPS demonstrated pseudoplastic behavior and high thermal stability. At day 30, the biomass reached a titer of 1.01 g/L while the crude EPS production was shown to attain 9.5 g/L, wherein the highest productivity happened on day 10 (0.6 g/L/day); however, it is known that outdoor conditions can affect productivities due to variable climate conditions and geographic location [93].

3.2.3. Modes of Cultivation and PBR Design

Cultivation modes are used as a strategy to increase biomass and EPS production [94]. The majority of Cyano-EPS are reported in batch mode followed by almost unexplored fed-batch [51,72] and continuous mode [70]. Anabaena sp. ATCC 33047 grown under different dilution rates was found optimal EPS/biomass ratio of higher than 1.5 and EPS productivity attaining 1.1 g/L/day at 0.03 hour−1. In addition, EPS and biomass production phases were shown to be disassociated [70]. Other authors have claimed the same disassociation of the kinetics [76,77,79].
Photobioreactor (PBR) design technology has been highly evolving due to extensive research applied to microalgal biofuels; however, their application to EPS production does not seem adequate [95]. Immobilizing cyanobacteria in cotton toweling showed the basic limitations of biomass production due to high lateral pressure [96]. A flow-lane incubator in fed-batch mode was used to grow biofilm-forming cyanobacteria. The results showed that the planktonic growth was far more productive. The same was observed for EPS production in a 25 L open pound system with N. flagelliforme under batch and fed-bath cultivation mode. The comparison demonstrated higher biomass and EPS production under fed-batch mode [72]. Arthrospira platensis was batch-grown in 30 m2 PBR located at a coal power plant in Taiwan for flue gas consumption. This novel PBR consisted of multiple 1 L stacked vessels individually controlled. The outdoor conditions were supplied with sunlight and an extra 10 h of LED illumination during the night. Temperature levels ranged from 30–34 °C during 15 days of experiment. The system was able to produce 2.36 g L−1 and produce a CPS with immunogenic activity [92].

3.2.4. Design of Experiments

Optimization refers to the discovery of the conditions of a system, a process, or a product to obtain the maximum benefit from it [97]. The classical methods involve the optimization of just one condition at a time, a methodology highly applied in Cyano-EPS (see Table 3). The optimization method must take into account all the interactions and the optimum conditions obtained are validated. The design of experiments is highly used in bioprocess optimization, though the examples in Cyano-EPS are less frequent. A central composite design (CCD) was applied to Cyanothece epiphytia to evaluate the combined effect of micronutrients magnesium and iron [62]. A full factorial design was applied Arthrospira sp. for the combination of NaCl and light intensity factors [89]. The same experimental design was applied to A. platensis strain “Compére 1968/3786” under photoautotrophic [98] and mixotrophic modes [68]. Temperature highly affected growth and EPS production when compared to light intensity; however, the combination of temperature and light were also found to be significant, while growth and EPS production had different optima settings [98]. Light intensity and glucose concentration were investigated under mixotrophic conditions. In this case, EPS titer and yield were mostly affected by glucose concentration with divergent optimal set points [68].

3.3. Downstream Processes and Cyano-EPS Global Market

Interest for cyanobacteria EPS has increased significantly during the last two decades as they offer some structural originalities compared to those extracted from marine microalgae and to hydrocolloids from macroalgae and plants [10,50]. They have wide putative applications such as: food additives, soil (water holding capacity), wastewater treatments (removal of heavy metals), bioactive agents for nutraceutic, pharmaceutical, and cosmetic fields [101]. The development of strategies for their extraction and purification is strongly correlated with their cellular location. EPS should be employed only to reference polysaccharides excreted by microorganisms in their extracellular environment and not having covalent links with their cellular envelope. Considering the abundant literature focusing on polysaccharides from cyanobacteria they can be divided into three groups: biopolymers poorly associated with the cell surface and usually encompassed under the term of slime or released polysaccharides (RPS); polysaccharide structured as a sheath, which is a thin layer next to the outer cell membrane and containing fibers; capsular polysaccharides (CPS) intimately associated with the envelope cells [102]. The extraction and purification of these polysaccharides from cyanobacterial culture media is a major concern before the investigation of their structure and/or to find commercial applications. The main question before developing a strategy for their purification is what kind of EPS is the objective of the extraction: slime, sheath, or capsular polysaccharides? Several articles or reviews detail the processes available for the extraction of these three kinds of biopolymers, often calling them with different appellations, increasing the confusion between these different classes [10,35,40,102,103,104,105]. All the protocols are summarized in Figure 1. Firstly, the extracellular medium of cyanobacteria cultures is collected generally by centrifugation, but tangential microfiltration may be an interesting alternative as described by [106] for red microalgae or by [10]. Note that [105] suggested suspending the pellet in Milli-Q water and to incubate them at 4 °C during 12 h before to centrifuge them again to collect, by depletion, the maximum of slime. The cyanobacteria free supernatants or permeates are then treated by polar alcohols (methanol, ethanol, or isopropanol) or acetone to precipitate the EPS. The volume ratios are different depending on studies but two or three volumes of cold ethanol (or isopropanol) is probably a good compromise. Sometimes the supernatant is concentrated under vacuum at low temperatures (50–60 °C) to limit the volume of used alcohol or acetone [10,50]. This sole EPS precipitation is generally not enough to remove salts and/or low molecular weight metabolites from extracted polysaccharides as they co-precipitated during alcohol/acetone treatment. So, two protocols are generally used by authors to increase the purity level of polysaccharides, measured by Dubois assay [107]. The first one is a solubilization of dried polysaccharides in Milli-Q water before their precipitation using the same alcohol or acetone volume ratio. The second one is to dialyze them against water. Finally, the EPS are freeze-dried or dried under vacuum. The second extraction strategy focuses on polysaccharides designed as a sheath (or CPS) and concerns the main extraction protocols described in the literature. Numerous cyanobacteria such as Nostoc genus form macroscopic colonies embedded in extracellular polysaccharides protecting them from environment [108].
Even if these polysaccharides do not have covalent linkages with the cyanobacteria cell wall, they interact strongly with it, which requires specific processes to dissociate them. Note that in numerous publications, authors include sheath and capsular polysaccharides as a unique fraction. These processes present some differences but can be resumed by collecting biomass using centrifugation and the extraction of EPS using hot distilled water (50–121 °C) in varying times (0.5–6 h). In other protocols, the extraction is achieved by differential sucrose gradient centrifugation of cyanobacterial biomass or after re-suspending it in a low ionic strength buffer at 100 °C [22,105,108]. After the extraction, the suspension is filtered through a filter paper, of 0.2 µm membrane or centrifuged to collect the permeate or the supernatant. The retentate or the pellets are extracted again several times using the same process to deplete the biomass (up to 5–6 times). Note that with this extraction numerous non-polysaccharidic compounds and notably proteins are co-extracted needing a purification supplementary step. Another way to start is by a 50 °C concentration under vacuum (not always necessary or done) followed by an optional protein extraction using the Sevag method or another. Then, an alcoholic (isopropanol or ethanol (2–3 v/v)) precipitation of polysaccharides is applied. Finally polysaccharides are freeze- or oven-dried [10,14,90,105]. Sometimes, the lipids and pigments of the biomass can be previously extracted using an organic solvent such as hexane, acetone, ethanol, or other [14,92]. This kind of process may be improved using microwave or ultrasound treatments as applied to Arthrospira biomass [109,110]. Finally, the last class of extracellular polysaccharides is that of capsular polysaccharide needing stronger conditions for their extraction. Often considered as EPS in literature, their extraction implies the use of alkaline treatments of biomass such as a reflux in NaOH 0.1 M for 5 h at 90 °C [111]. The polysaccharides are precipitated using two volumes of isopropanol and dissolved in Milli-Q water. A second precipitation with alcohol is performed to increase their purity level.
In their excellent review entitled « Exocellular polysaccharides from cyanobacteria and their possible applications » published in FEMS Microbiology Letters in 1998, R. De Philippis and M., Vincenzini [108] were very careful considering the industrial exploitation of EPS from cyanobacteria despite their potential. Cyanobacterial EPS have to compete with cheaper hydrocolloids from seaweeds, terrestrial plants, and non-photosynthetic bacteria, wherein some have authorizations for their use in food. What is the situation 21 years later? The number of publications focusing on the rheological and biological potential of these biopolymers increases dramatically [10,22,101,105,112] but is not correlated with the arrival on the market of EPS from cyanobacteria. Currently and to our knowledge, only four EPS from Cyanobacteria are commercially available and exploited in niche markets mainly in the cosmetic and nutraceutical area. They are Spirulan, Immulan, Nostoflan, and Emulcyan extracted from respectively Arthrospira platensis, Aphanotece halophytica, Nostoc flagelliforme, and Phormidium [22,113,114,115].

4. Considerations for Cyano-EPS Development

In light of bioprocess development, Cyano-EPS has still a long way to become a trustable supplier of polysaccharides for the hydrocolloids industry. For that, three key steps must interplay: strain selection, production process, and downstream processing.
Increased cell robustness is a concept elaborated in [116], wherein the selection of the organism takes into account the relevant process parameters as well all the whole bioprocess stages until the final product performance. According to [116] the stability of a bioprocess depends on the following factors: shear stress resistance; tolerance against temperature and/pH; low sensitivity to infections; robustness against contaminations; no sticking or biofouling. To date no comprehensive screening taking into account the sustainability of bioprocess was published for cyanobacterial EPS. Interesting examples are being applied to the microalgae field by: the selection of desert-adapted strains for commercial application and CO2 sequestration [117]; cold-adapted microalgae strains for the production of fatty acids and proteins [118]. Application of such strategies in Cyano-EPS might bring a new possibility, whereas it will be determinant the polymer functionality. Other possibilities include the use of genetic engineering technologies for the development of cyanobacterial tailor-made polymers [119].
For the production process, much can be done around optimization, especially by applying statistically-based experimental design methods. Culture medium components, pH, mass, and gas transference rate, light, and inoculum conditions are some of the factors to consider in Cyano-EPS optimization. For this, it is important to understand the kinetics of biomass and EPS production for the cultivation conditions applied and opt for the most convenient strategy. The use of omics as a support tool can along with cultivation unroll unknown factors [120]. One stage cultivation seems practical for cases in which growth and EPS are associated, whereas two-stage cultivation will fit for the decoupled cases and biomass can be produced followed by the EPS production phase. PBR design has still considerable space for improvement with special needs for the mass and gas transfer within the culture vessel due to culture medium viscosity increase.
The location of the EPS should be taken into account since it will strongly affect the downstream processing. RPS can be easily recovered from the culture medium allowing the possibility to valorize the biomass produced. Conversely, CPS attached to the cell surface involve more destructive methodologies that might restrict the valorization of the produced biomass. However, an alternative to this was found through the combination of methodologies for the extraction of CPS and pigments. This methodology was confirmed in four cyanobacterial strains and proposes the CPS extraction followed by freeze-drying of the biomass, extraction of phycobiliproteins, and extraction of chlorophyll a and carotenoids [121].
Water and nutrients sources must be highly considered since the beginning of the bioprospection process not only for their sustainability but also for their future impacts on the EPS purification.

5. Conclusions

Cyano-EPS can offer unique structures, and thus, new functionalities; however, bioprospection needs more diversity of strains and methodologies to discover reliable EPS producers. Integrative methodologies of production and extraction can make this bioprocess more attractive to the industry through the increase of productivities and efficiency, respectively. Cyano-EPS have the potential to be a natural polysaccharide supplier to niche markets.

Author Contributions

Conceptualization, D.C., V.V., and C.D.; investigation, D.C. and V.V.; writing—original draft preparation, D.C., V.V., and C.D.; writing—review and editing, D.C., V.V., P.M., G.P., and C.D.; supervision, V.V. and C.D.; project administration, V.V. and C.D.; funding acquisition, D.G. and V.V. All authors have read and agreed to the published version of the manuscript.

Funding

This research was funded by FCT UIDB/04423/2020 and UIDP/04423/2020 and by the Atlantic Interreg Project Enhance MicroAlgae—High added-value industrial opportunities for microalgae in the Atlantic Area [EAPA_338/2016].

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Michaud, P. Polysaccharides from Microalgae, what’s future? Adv. Biotechnol. Microbiol. 2018, 8. [Google Scholar] [CrossRef]
  2. Freitas, F.; Torres, C.A.V.; Reis, M.A.M. Engineering aspects of microbial exopolysaccharide production. Bioresour. Technol. 2017, 245, 1674–1683. [Google Scholar] [CrossRef] [PubMed]
  3. Barcelos, M.C.S.; Vespermann, K.A.C.; Pelissari, F.M.; Molina, G. Current status of biotechnological production and applications of microbial exopolysaccharides. Crit. Rev. Food Sci. Nutr. 2019, 60, 1–21. [Google Scholar]
  4. Kamravamanesh, D.; Lackner, M.; Herwig, C. Bioprocess engineering aspects of sustainable polyhydroxyalkanoate production in Cyanobacteria. Bioengineering 2018, 5, 111. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  5. Wijffels, R.H.; Barbosa, M.J. An outlook on microalgal biofuels. Science 2010, 329, 796–799. [Google Scholar] [CrossRef] [Green Version]
  6. Okajima, M.K.; Sornkamnerd, S.; Kaneko, T. Development of functional bionanocomposites using cyanobacterial polysaccharides. Chem. Rec. 2018, 18, 1167–1177. [Google Scholar] [CrossRef]
  7. Ramos, V.; Morais, J.; Castelo-Branco, R.; Pinheiro, Â.; Martins, J.; Regueiras, A.; Pereira, A.L.; Lopes, V.R.; Frazão, B.; Gomes, D. Cyanobacterial diversity held in microbial biological resource centers as a biotechnological asset: The case study of the newly established LEGE culture collection. J. Appl. Phycol. 2018, 30, 1437–1451. [Google Scholar]
  8. Hays, S.G.; Ducat, D.C. Engineering cyanobacteria as photosynthetic feedstock factories. Photosynth. Res. 2015, 123, 285–295. [Google Scholar] [CrossRef]
  9. Pereira, S.; Zille, A.; Micheletti, E.; Moradas-Ferreira, P.; De Philippis, R.; Tamagnini, P. Complexity of cyanobacterial exopolysaccharides: Composition, structures, inducing factors and putative genes involved in their biosynthesis and assembly. FEMS Microbiol. Rev. 2009, 33, 917–941. [Google Scholar]
  10. Delattre, C.; Pierre, G.; Laroche, C.; Michaud, P. Production, extraction and characterization of microalgal and cyanobacterial exopolysaccharides. Biotechnol. Adv. 2016, 34, 1159–1179. [Google Scholar] [CrossRef]
  11. Han, P.; Sun, Y.; Wu, X.; Yuan, Y.; Dai, Y.; Jia, S. Emulsifying, flocculating, and physicochemical properties of exopolysaccharide produced by cyanobacterium Nostoc flagelliforme. Appl. Biochem. Biotechnol. 2014, 172, 36–49. [Google Scholar] [CrossRef] [PubMed]
  12. Roncero-Ramos, B.; Román, J.R.; Gómez-Serrano, C.; Cantón, Y.; Acién, F.G. Production of a biocrust-cyanobacteria strain (Nostoc commune) for large-scale restoration of dryland soils. J. Appl. Phycol. 2019, 31, 2217–2230. [Google Scholar]
  13. Xu, Y.; Rossi, F.; Colica, G.; Deng, S.; De Philippis, R.; Chen, L. Use of cyanobacterial polysaccharides to promote shrub performances in desert soils: A potential approach for the restoration of desertified areas. Biol. Fertil. Soils 2013, 49, 143–152. [Google Scholar] [CrossRef]
  14. Wang, H.-B.; Wu, S.-J.; Liu, D. Preparation of polysaccharides from cyanobacteria Nostoc commune and their antioxidant activities. Carbohydr. Polym. 2014, 99, 553–555. [Google Scholar]
  15. Gudmundsdottir, A.B.; Omarsdottir, S.; Brynjolfsdottir, A.; Paulsen, B.S.; Olafsdottir, E.S.; Freysdottir, J. Exopolysaccharides from cyanobacterium aponinum from the Blue Lagoon in Iceland increase IL-10 secretion by human dendritic cells and their ability to reduce the IL-17 + RORγt + /IL-10 + FoxP3 + ratio in CD4 + T cells. Immunol. Lett. 2015, 163, 157–162. [Google Scholar] [CrossRef]
  16. Hussein, M.H.; Abou-ElWafa, G.S.; Shaaban-Dessuuki, S.A.; Hassan, N.I. Characterization and antioxidant activity of exopolysaccharide secreted by Nostoc carneum. Int. J. Pharm. 2015, 11, 432–439. [Google Scholar]
  17. Li, H.; Su, L.; Chen, S.; Zhao, L.; Wang, H.; Ding, F.; Chen, H.; Shi, R.; Wang, Y.; Huang, Z. Physicochemical characterization and functional analysis of the Polysaccharide from the edible microalga nostoc sphaeroides. Molecules 2018, 23, 508. [Google Scholar] [CrossRef] [Green Version]
  18. Bellini, E.; Ciocci, M.; Savio, S.; Antonaroli, S.; Seliktar, D.; Melino, S.; Congestri, R. Trichormus variabilis (Cyanobacteria) biomass: From the nutraceutical products to novel EPS-cell/protein carrier systems. Mar. Drugs 2018, 16, 298. [Google Scholar]
  19. Leite, J.P.; Mota, R.; Durão, J.; Neves, S.C.; Barrias, C.C.; Tamagnini, P.; Gales, L. Cyanobacterium-derived extracellular carbohydrate polymer for the controlled delivery of functional proteins. Macromol. Biosci. 2017, 17, 1600206. [Google Scholar] [CrossRef]
  20. Bhunia, B.; Uday, U.S.P.; Oinam, G.; Mondal, A.; Bandyopadhyay, T.K.; Tiwari, O.N. Characterization, genetic regulation and production of cyanobacterial exopolysaccharides and its applicability for heavy metal removal. Carbohydr. Polym. 2018, 179, 228–243. [Google Scholar] [CrossRef]
  21. Chamizo, S.; Mugnai, G.; Rossi, F.; Certini, G.; De Philippis, R. Cyanobacteria inoculation improves soil stability and fertility on different textured soils: Gaining insights for applicability in soil restoration. Front. Environ. Sci. 2018, 6, 49. [Google Scholar]
  22. Li, P.; Harding, S.E.; Liu, Z. Cyanobacterial exopolysaccharides: Their nature and potential biotechnological applications. Biotechnol. Genet. Eng. Rev. 2001, 18, 375–404. [Google Scholar] [CrossRef] [PubMed]
  23. Rossi, F.; De Philippis, R. Role of cyanobacterial exopolysaccharides in phototrophic biofilms and in complex microbial mats. Life 2015, 5, 1218–1238. [Google Scholar] [PubMed] [Green Version]
  24. Cui, L.; Xu, H.; Zhu, Z.; Gao, X. The effects of the exopolysaccharide and growth rate on the morphogenesis of the terrestrial filamentous cyanobacterium Nostoc flagelliforme. Biol. Open 2017, 6, 1329–1335. [Google Scholar]
  25. Sciuto, K.; Moro, I. Cyanobacteria: The bright and dark sides of a charming group. Biodivers. Conserv. 2015, 24, 711–738. [Google Scholar]
  26. Myklestad, S.M. Release of extracellular products by phytoplankton with special emphasis on polysaccharides. Sci. Total Environ. 1995, 165, 155–164. [Google Scholar] [CrossRef]
  27. Rossi, F.; De Philippis, R. Exocellular polysaccharides in Microalgae and Cyanobacteria: Chemical features, role and enzymes and genes involved in their biosynthesis. In the Physiology of Microalgae; Springer: Berlin/Heidelberg, Germany, 2016; pp. 565–590. [Google Scholar]
  28. Ahmed, M.; Moerdijk-Poortvliet, T.C.W.; Wijnholds, A.; Stal, L.J.; Hasnain, S. Isolation, characterization and localization of extracellular polymeric substances from the cyanobacterium Arthrospira platensis strain MMG-9. Eur. J. Phycol. 2014, 49, 143–150. [Google Scholar]
  29. Pathak, J.; Rajneesh, R.; Sonker, A.S.; Kannaujiya, V.K.; Sinha, R.P. Cyanobacterial extracellular polysaccharide sheath pigment, scytonemin: A novel multipurpose pharmacophore. In Marine Glycobiology; CRC Press: Boca Raton, FL, USA, 2016; pp. 343–358. [Google Scholar]
  30. Rossi, F.; Mugnai, G.; De Philippis, R. Complex role of the polymeric matrix in biological soil crusts. Plant Soil 2018, 429, 1–16. [Google Scholar]
  31. Mota, R.; Vidal, R.; Pandeirada, C.; Flores, C.; Adessi, A.; De Philippis, R.; Nunes, C.; Coimbra, M.A.; Tamagnini, P. Cyanoflan: A cyanobacterial sulfated carbohydrate polymer with emulsifying properties. Carbohydr. Polym. 2019, 229, 115525. [Google Scholar] [CrossRef]
  32. Ngatu, N.R.; Okajima, M.K.; Yokogawa, M.; Hirota, R.; Eitoku, M.; Muzembo, B.A.; Dumavibhat, N.; Takaishi, M.; Sano, S.; Kaneko, T. Anti-inflammatory effects of sacran, a novel polysaccharide from Aphanothece sacrum, on 2, 4, 6-trinitrochlorobenzene–induced allergic dermatitis in vivo. Ann. Allergy Asthma Immunol. 2012, 108, 117–122. [Google Scholar] [CrossRef]
  33. Chi, Z.; Su, C.D.; Lu, W.D. A new exopolysaccharide produced by marine Cyanothece sp. 113. Bioresour. Technol. 2007, 98, 1329–1332. [Google Scholar] [CrossRef] [PubMed]
  34. Shah, V.; Ray, A.; Garg, N.; Madamwar, D. Characterization of the extracellular polysaccharide produced by a marine cyanobacterium, Cyanothece sp. ATCC 51142, and its exploitation toward metal removal from solutions. Curr. Microbiol. 2000, 40, 274–278. [Google Scholar] [CrossRef] [PubMed]
  35. Helm, R.F.; Huang, Z.; Edwards, D.; Leeson, H.; Peery, W.; Potts, M. Structural characterization of the released polysaccharide of desiccation-tolerant Nostoc communeDRH-1. J. Bacteriol. 2000, 182, 974–982. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  36. Kanekiyo, K.; Lee, J.-B.; Hayashi, K.; Takenaka, H.; Hayakawa, Y.; Endo, S.; Hayashi, T. Isolation of an antiviral polysaccharide, nostoflan, from a terrestrial cyanobacterium, Nostoc f lagelliforme. J. Nat. Prod. 2005, 68, 1037–1041. [Google Scholar] [CrossRef] [PubMed]
  37. Volk, R.-B.; Venzke, K.; Blaschek, W. Structural investigation of a polysaccharide released by the cyanobacterium Nostoc insulare. J. Appl. Phycol. 2007, 19, 255. [Google Scholar] [CrossRef]
  38. Liu, Y.; Su, P.; Xu, J.; Chen, S.; Zhang, J.; Zhou, S.; Wang, Y.; Tang, Q.; Wang, Y. Structural characterization of a bioactive water-soluble heteropolysaccharide from Nostoc sphaeroids kütz. Carbohydr. Polym. 2018, 200, 552–559. [Google Scholar] [CrossRef]
  39. Hayashi, T.; Hayashi, K.; Maeda, M.; Kojima, I. Calcium spirulan, an inhibitor of enveloped virus replication, from a blue-green alga Spirulina platensis. J. Nat. Prod. 1996, 59, 83–87. [Google Scholar] [CrossRef]
  40. De Philippis, R.; Faraloni, C.; Margheri, M.C.; Sili, C.; Herdman, M.; Vincenzini, M. Morphological and biochemical characterization of the exocellular investments of polysaccharide-producing Nostoc strains from the pasteur culture collection. World J. Microbiol. Biotechnol. 2000, 16, 655–661. [Google Scholar] [CrossRef]
  41. Gaignard, C.; Laroche, C.; Pierre, G.; Dubessay, P.; Delattre, C.; Gardarin, C.; Gourvil, P.; Probert, I.; Dubuffet, A.; Michaud, P. Screening of marine microalgae: Investigation of new exopolysaccharide producers. Algal Res. 2019, 44, 101711. [Google Scholar] [CrossRef]
  42. Xu, H.; Cai, H.; Yu, G.; Jiang, H. Insights into extracellular polymeric substances of cyanobacterium Microcystis aeruginosa using fractionation procedure and parallel factor analysis. Water Res. 2013, 47, 2005–2014. [Google Scholar] [CrossRef]
  43. Mancuso-Nichols, C.A.; Nairn, K.M.; Glattauer, V.; Blackburn, S.I.; Ramshaw, J.A.M.; Graham, L.D. Screening microalgal cultures in search of microbial exopolysaccharides with potential as adhesives. J. Adhes. 2009, 85, 97–125. [Google Scholar] [CrossRef]
  44. Singh, S.; Das, S. Screening, production, optimization and characterization of cyanobacterial Polysaccharide. World J. Microbiol. Biotechnol. 2011, 27, 1971–1980. [Google Scholar]
  45. Uhliariková, I.; Chválová, B.; Matulová, M.; Cepák, V.; Lukavský, J.; Capek, P. Extracellular biopolymers produced by freshwater cyanobacteria: A screening study. Chem. Pap. 2019, 73, 771–776. [Google Scholar] [CrossRef]
  46. Zhang, Y.; Chi, Z.; Lu, W. Exopolysaccharide production by four cyanobacterial isolates and preliminary identification of these isolates. J. Ocean Univ. China 2007, 6, 147–152. [Google Scholar] [CrossRef]
  47. Tiwari, O.N.; Khangembam, R.; Shamjetshabam, M.; Sharma, A.S.; Oinam, G.; Brand, J.J. Characterization and optimization of bioflocculant exopolysaccharide production by Cyanobacteria Nostoc sp. BTA97 and Anabaena sp. BTA990 in culture conditions. Appl. Biochem. Biotechnol. 2015, 176, 1950–1963. [Google Scholar] [CrossRef] [PubMed]
  48. Khangembam, R.; Tiwari, O.; Kalita, M. Production of exopolysaccharides by the cyanobacterium Anabaena sp. BTA992 and application as bioflocculants. J. Appl. Biol. Biotechnol. 2016, 4, 8–11. [Google Scholar]
  49. Richert, L.; Golubic, S.; Le Guédès, R.; Ratiskol, J.; Payri, C.; Guezennec, J. Characterization of exopolysaccharides produced by Cyanobacteria isolated from Polynesian microbial mats. Curr. Microbiol. 2005, 51, 379–384. [Google Scholar] [CrossRef]
  50. Parikh, A.; Madamwar, D. Partial characterization of extracellular polysaccharides from Cyanobacteria. Bioresour. Technol. 2006, 97, 1822–1827. [Google Scholar]
  51. Di Pippo, F.; Ellwood, N.T.W.; Gismondi, A.; Bruno, L.; Rossi, F.; Magni, P.; De Philippis, R. Characterization of exopolysaccharides produced by seven biofilm-forming cyanobacterial strains for biotechnological applications. J. Appl. Phycol. 2013, 25, 1697–1708. [Google Scholar] [CrossRef] [Green Version]
  52. Ozturk, S.; Aslim, B. Modification of exopolysaccharide composition and production by three cyanobacterial isolates under salt stress. Environ. Sci. Pollut. Res. 2010, 17, 595–602. [Google Scholar] [CrossRef]
  53. Otero, A.; Vincenzini, M. Extracellular polysaccharide synthesis by Nostoc strains as affected by N source and light intensity. J. Biotechnol. 2003, 102, 143–152. [Google Scholar] [PubMed]
  54. Nicolaus, B.; Panico, A.; Lama, L.; Romano, I.; Manca, M.C.; De Giulio, A.; Gambacorta, A. Chemical composition and production of exopolysaccharides from representative members of heterocystous and non-heterocystous Cyanobacteria. Phytochemistry 1999, 52, 639–647. [Google Scholar] [CrossRef]
  55. Seviour, R.J.; McNeil, B.; Fazenda, M.L.; Harvey, L.M. Operating bioreactors for microbial exopolysaccharide production. Crit. Rev. Biotechnol. 2011, 31, 170–185. [Google Scholar]
  56. Mota, R.; Guimarães, R.; Büttel, Z.; Rossi, F.; Colica, G.; Silva, C.J.; Santos, C.; Gales, L.; Zille, A.; De Philippis, R. Production and characterization of extracellular carbohydrate polymer from Cyanothece sp. CCY 0110. Carbohydr. Polym. 2013, 92, 1408–1415. [Google Scholar] [CrossRef] [PubMed]
  57. Yu, H.; Jia, S.; Dai, Y. Accumulation of exopolysaccharides in liquid suspension culture of Nostoc flagelliforme cells. Appl. Biochem. Biotechnol. 2010, 160, 552–560. [Google Scholar] [PubMed]
  58. Lama, L.; Nicolaus, B.; Calandrelli, V.; Manca, M.C.; Romano, I.; Gambacorta, A. Effect of growth conditions on endo-and exopolymer biosynthesis in Anabaena cylindrica 10 C. Phytochemistry 1996, 42, 655–659. [Google Scholar] [CrossRef]
  59. Khattar, J.I.S.; Singh, D.P.; Jindal, N.; Kaur, N.; Singh, Y.; Rahi, P.; Gulati, A. Isolation and characterization of exopolysaccharides produced by the cyanobacterium limnothrix redekei PUPCCC 116. Appl. Biochem. Biotechnol. 2010, 162, 1327–1338. [Google Scholar] [CrossRef]
  60. Jindal, N.; Singh, D.P.; Khattar, J.I.S. Kinetics and physico-chemical characterization of exopolysaccharides produced by the cyanobacterium Oscillatoria formosa. World J. Microbiol. Biotechnol. 2011, 27, 2139–2146. [Google Scholar]
  61. Han, P.; Shen, S.; Wang, H.-Y.; Yao, S.; Tan, Z.; Zhong, C.; Jia, S. Applying the strategy of light environment control to improve the biomass and polysaccharide production of Nostoc flagelliforme. J. Appl. Phycol. 2017, 29, 55–65. [Google Scholar] [CrossRef]
  62. Borah, D.; Nainamalai, S.; Gopalakrishnan, S.; Rout, J.; Alharbi, N.S.; Alharbi, S.A.; Nooruddin, T. Biolubricant potential of exopolysaccharides from the cyanobacterium Cyanothece epiphytica. Appl. Microbiol. Biotechnol. 2018, 102, 3635–3647. [Google Scholar]
  63. Han, P.; Yao, S.; Guo, R.; Yan, R.; Wu, Y.; Shen, S.; Jia, S. Influence of culture conditions on extracellular polysaccharide production and the activities of enzymes involved in the polysaccharide synthesis of Nostoc flagelliforme. RSC Adv. 2017, 7, 45075–45084. [Google Scholar] [CrossRef] [Green Version]
  64. Phlips, E.J.; Zeman, C.; Hansen, P. Growth, photosynthesis, nitrogen fixation and carbohydrate production by a unicellular cyanobacterium, Synechococcus sp.(Cyanophyta). J. Appl. Phycol. 1989, 1, 137–145. [Google Scholar] [CrossRef]
  65. Su, C.; Chi, Z.; Lu, W. Optimization of medium and cultivation conditions for enhanced exopolysaccharide yield by marine Cyanothece sp. 113. Chin. J. Oceanol. Limnol. 2007, 25, 411–417. [Google Scholar]
  66. Vergnes, J.-B.; Gernigon, V.; Guiraud, P.; Formosa-Dague, C. Bicarbonate concentration induces production of exopolysaccharides by Arthrospira platensis that mediate bioflocculation and enhance flotation harvesting efficiency. Acs Sustain. Chem. Eng. 2019, 7, 13796–13804. [Google Scholar]
  67. Shen, S.; Jia, S.; Wu, Y.; Yan, R.; Lin, Y.-H.; Zhao, D.; Han, P. Effect of culture conditions on the physicochemical properties and antioxidant activities of polysaccharides from Nostoc flagelliforme. Carbohydr. Polym. 2018, 198, 426–433. [Google Scholar] [CrossRef]
  68. Trabelsi, L.; Ouada, H.B.; Zili, F.; Mazhoud, N.; Ammar, J. Evaluation of Arthrospira platensis extracellular polymeric substances production in photoautotrophic, heterotrophic and mixotrophic conditions. Folia Microbiol. 2013, 58, 39–45. [Google Scholar] [CrossRef]
  69. Bemal, S.; Anil, A.C. Effects of salinity on cellular growth and exopolysaccharide production of freshwater Synechococcus strain CCAP1405. J. Plankton Res. 2017, 40, 46–58. [Google Scholar]
  70. Moreno, J.; Vargas, M.A.; Olivares, H.; Rivas, J.; Guerrero, M.G. Exopolysaccharide production by the cyanobacterium Anabaena sp. ATCC 33047 in batch and continuous culture. J. Biotechnol. 1998, 60, 175–182. [Google Scholar] [CrossRef]
  71. Kamennaya, N.A.; Zemla, M.; Mahoney, L.; Chen, L.; Holman, E.; Holman, H.-Y.; Auer, M.; Ajo-Franklin, C.M.; Jansson, C. High p CO2-induced exopolysaccharide-rich ballasted aggregates of planktonic cyanobacteria could explain paleoproterozoic carbon burial. Nat. Commun. 2018, 9, 2116. [Google Scholar]
  72. Tan, N.; Jia, S.R.; Han, P.P.; Guo, W.; Dai, Y.J. The open culture of Nostoc flagelliforme with a 25 L open pond. In Advanced Materials Research; Trans Tech Publications Ltd.: Bäch, Switzerland, 2012; Volume 554, pp. 1009–1012. [Google Scholar]
  73. Xiao, Y.; Li, Z.; Li, C.; Zhang, Z.; Guo, J. Effect of small-scale turbulence on the physiology and morphology of two bloom-forming cyanobacteria. PLoS ONE 2016, 11, e0168925. [Google Scholar] [CrossRef]
  74. Fadlallah, H.; Jarrahi, M.; Herbert, E.; Ferrari, R.; Mejean, A.; Peerhossaini, H. Effects of shear stress on the growth rate of micro-organisms in agitated reactors. In Proceedings of the ASME 2016 Fluids Engineering Division Summer Meeting collocated with the ASME 2016 Heat Transfer Summer Conference and the ASME 2016 14th International Conference on Nanochannels, Microchannels, and Minichannels, Washington, DC, USA, 10–14 July 2016. [Google Scholar]
  75. Trabelsi, L.; M’sakni, N.H.; Ouada, H.B.; Bacha, H.; Roudesli, S. Partial characterization of extracellular polysaccharides produced by cyanobacterium Arthrospira platensis. Biotechnol. Bioprocess Eng. 2009, 14, 27–31. [Google Scholar] [CrossRef]
  76. Gris, B.; Sforza, E.; Morosinotto, T.; Bertucco, A.; La Rocca, N. Influence of light and temperature on growth and high-value molecules productivity from Cyanobacterium aponinum. J. Appl. Phycol. 2017, 29, 1781–1790. [Google Scholar]
  77. Kvíderová, J.; Kumar, D.; Lukavský, J.; Kaštánek, P.; Adhikary, S.P. Estimation of growth and exopolysaccharide production by two soil Cyanobacteria, Scytonema tolypothrichoides and Tolypothrix bouteillei as determined by cultivation in irradiance and temperature crossed gradients. Eng. Life Sci. 2019, 19, 184–195. [Google Scholar] [CrossRef] [Green Version]
  78. Werner, A.; Broeckling, C.D.; Prasad, A.; Peebles, C.A.M. A comprehensive time-course metabolite profiling of the model cyanobacterium Synechocystis sp. PCC 6803 under diurnal light: Dark cycles. Plant J. 2019, 99, 379–388. [Google Scholar] [PubMed]
  79. Han, P.; Sun, Y.; Jia, S.; Zhong, C.; Tan, Z. Effects of light wavelengths on extracellular and capsular polysaccharide production by Nostoc flagelliforme. Carbohydr. Polym. 2014, 105, 145–151. [Google Scholar] [CrossRef]
  80. Han, P.; Shen, S.; Wang, H.-Y.; Sun, Y.; Dai, Y.; Jia, S. Comparative metabolomic analysis of the effects of light quality on polysaccharide production of cyanobacterium Nostoc flagelliforme. Algal Res. 2015, 9, 143–150. [Google Scholar] [CrossRef]
  81. Han, P.; Yao, S.; Guo, R.; Shen, S.; Yan, R.; Tan, Z.; Jia, S. The relationship between monosaccharide composition of extracellular polysaccharide and activities of related enzymes in Nostoc flagelliforme under different culture conditions. Carbohydr. Polym. 2017, 174, 111–119. [Google Scholar]
  82. Han, P.; Guo, R.; Shen, S.; Yan, R.; Wu, Y.; Yao, S.; Wang, H.; Jia, S. Proteomic profiling of Nostoc flagelliforme reveals the common mechanism in promoting polysaccharide production by different light qualities. Biochem. Eng. J. 2018, 132, 68–78. [Google Scholar]
  83. Han, P.; Shen, S.; Guo, R.; Zhao, D.; Lin, Y.-H.; Jia, S.; Yan, R.; Wu, Y. ROS Is a Factor regulating the increased polysaccharide production by light quality in the edible cyanobacterium Nostoc flagelliforme. J. Agric. Food Chem. 2019, 67, 2235–2244. [Google Scholar] [CrossRef]
  84. Shen, S.-G.; Lin, Y.-H.; Zhao, D.-X.; Wu, Y.-K.; Yan, R.-R.; Zhao, H.-B.; Tan, Z.-L.; Jia, S.-R.; Han, P.-P. Comparisons of functional properties of polysaccharides from Nostoc flagelliforme under three culture conditions. Polymers 2019, 11, 263. [Google Scholar] [CrossRef] [Green Version]
  85. Ge, H.; Xia, L.; Zhou, X.; Zhang, D.; Hu, C. Effects of light intensity on components and topographical structures of extracellular polysaccharides from the cyanobacteria Nostoc sp. J. Microbiol. 2014, 52, 179–183. [Google Scholar] [CrossRef] [PubMed]
  86. Phélippé, M.; Gonçalves, O.; Thouand, G.; Cogne, G.; Laroche, C. Characterization of the polysaccharides chemical diversity of the Cyanobacteria Arthrospira platensis. Algal Res. 2019, 38, 101426. [Google Scholar] [CrossRef]
  87. Ho, S.-H.; Liao, J.-F.; Chen, C.-Y.; Chang, J.-S. Combining light strategies with recycled medium to enhance the economic feasibility of phycocyanin production with Spirulina platensis. Bioresour. Technol. 2018, 247, 669–675. [Google Scholar] [CrossRef] [PubMed]
  88. Pagels, F.; Lopes, G.; Vasconcelos, V.; Guedes, A.C. White and red LEDs as two-phase batch for cyanobacterial pigments production. Bioresour. Technol. 2020, 123105. [Google Scholar] [CrossRef] [PubMed]
  89. Chentir, I.; Hamdi, M.; Doumandji, A.; HadjSadok, A.; Ouada, H.B.; Nasri, M.; Jridi, M. Enhancement of extracellular polymeric substances (EPS) production in Spirulina (Arthrospira sp.) by two-step cultivation process and partial characterization of their polysaccharidic moiety. Int. J. Biol. Macromol. 2017, 105, 1412–1420. [Google Scholar] [CrossRef]
  90. De Jesus, C.S.; de Jesus-Assis, D.; Rodriguez, M.B.; Menezes Filho, J.A.; Costa, J.A.V.; de Souza Ferreira, E.; Druzian, J.I. Pilot-scale isolation and characterization of extracellular polymeric substances (EPS) from cell-free medium of Spirulina sp. LEB-18 cultures under outdoor conditions. Int. J. Biol. Macromol. 2019, 124, 1106–1114. [Google Scholar] [CrossRef]
  91. Abe, A.; Ohashi, E.; Ren, H.; Hayashi, T.; Endo, H. Isolation and characterization of a cold-induced nonculturable suppression mutant of Vibrio vulnificus. Microbiol. Res. 2007, 162, 130–138. [Google Scholar] [CrossRef]
  92. Chen, H.-W.; Yang, T.-S.; Chen, M.-J.; Chang, Y.-C.; Lin, C.-Y.; Eugene, I.; Wang, C.; Ho, C.-L.; Huang, K.-M.; Yu, C.-C. Application of power plant flue gas in a photobioreactor to grow Spirulina algae, and a bioactivity analysis of the algal water-soluble polysaccharides. Bioresour. Technol. 2012, 120, 256–263. [Google Scholar] [CrossRef]
  93. Tredici, M.R. Photobiology of microalgae mass cultures: Understanding the tools for the next green revolution. Biofuels 2010, 1, 143–162. [Google Scholar] [CrossRef]
  94. Tiwari, O.N.; Chakraborty, S.; Devi, I.; Mondal, A.; Bhunia, B.; Boxiong, S. Bioprocess parameters of production of cyanobacterial exopolysaccharide: Biomass production and product recovery. In Handbook of Algal Technologies and Phytochemicals; CRC Press: Boca Raton, FL, USA, 2019; pp. 25–32. [Google Scholar]
  95. Pierre, G.; Delattre, C.; Dubessay, P.; Jubeau, S.; Vialleix, C.; Cadoret, J.-P.; Probert, I.; Michaud, P. What is in store for EPS Microalgae in the next decade? Molecules 2019, 24, 4296. [Google Scholar] [CrossRef] [Green Version]
  96. Fischer, D.; Schlösser, U.G.; Pohl, P. Exopolysaccharide production by cyanobacteria grown in closed photobioreactors and immobilized using white cotton towelling. J. Appl. Phycol. 1997, 9, 205–213. [Google Scholar] [CrossRef]
  97. Araujo, P.W.; Bereton, R.G. Experimental design II: Optimization. TrAC Trend. Anal. Chem. 1996, 15, 5–6. [Google Scholar] [CrossRef]
  98. Trabelsi, L.; Ouada, H.B.; Bacha, H.; Ghoul, M. Combined effect of temperature and light intensity on growth and extracellular polymeric substance production by the cyanobacterium Arthrospira platensis. J. Appl. Phycol. 2009, 21, 405–412. [Google Scholar] [CrossRef]
  99. De Philippis, R.; Sili, C.; Vincenzini, M. Response of an exopolysaccharide-producing heterocystous cyanobacterium to changes in metabolic carbon flux. J. Appl. Phycol. 1996, 8, 275–281. [Google Scholar]
  100. Ge, H.; Zhang, J.; Zhou, X.; Xia, L.; Hu, C. Effects of light intensity on components and topographical structures of extracellular polymeric substances from Microcoleus vaginatus (Cyanophyceae). Phycologia 2014, 53, 167–173. [Google Scholar]
  101. Wijffels, R.H.; Kruse, O.; Hellingwerf, K.J. Potential of industrial biotechnology with cyanobacteria and eukaryotic microalgae. Curr. Opin. Biotechnol. 2013, 24, 405–413. [Google Scholar] [CrossRef]
  102. De Philippis, R.; Vincenzini, M. Outermost polysaccharidic investments of cyanobacteria: Nature, significance and possible applications. Recent Res. Dev. Microbiol. 2003, 7, 13–22. [Google Scholar]
  103. Adhikary, S.P. Polysaccharides from mucilaginous envelope layers of Cyanobacteria and their ecological significance. J. Sci. Ind. Res. 1998, 57, 454–466. [Google Scholar]
  104. Bertocchi, C.; Navarini, L.; Cesàro, A.; Anastasio, M. Polysaccharides from Cyanobacteria. Carbohydr. Polym. 1990, 12, 127–153. [Google Scholar]
  105. Kumar, D.; Kastanek, P.; Adhikary, S.P. Exopolysaccharides from cyanobacteria and microalgae and their commercial application. Curr. Sci. 2018, 115, 234. [Google Scholar]
  106. Patel, A.K.; Laroche, C.; Marcati, A.; Ursu, A.V.; Jubeau, S.; Marchal, L.; Petit, E.; Djelveh, G.; Michaud, P. Separation and fractionation of exopolysaccharides from Porphyridium cruentum. Bioresour. Technol. 2013, 145, 345–350. [Google Scholar] [CrossRef] [PubMed]
  107. Dubois, M.; Gilles, K.A.; Hamilton, J.K.; Rebers, P.A.T.; Smith, F. Colorimetric method for determination of sugars and related substances. Anal. Chem. 1956, 28, 350–356. [Google Scholar]
  108. De Philippis, R.; Vincenzini, M. Exocellular polysaccharides from Cyanobacteria and their possible applications. Fems Microbiol. Rev. 1998, 22, 151–175. [Google Scholar] [CrossRef]
  109. Kurd, F.; Samavati, V. Water soluble polysaccharides from Spirulina platensis: Extraction and in vitro anti-cancer activity. Int. J. Biol. Macromol. 2015, 74, 498–506. [Google Scholar] [CrossRef]
  110. De Silva, A.S.; de Magalhaes, W.T.; Moreira, L.M.; Rocha, M.V.P.; Bastos, A.K.P. Microwave-assisted extraction of polysaccharides from Arthrospira (Spirulina) platensis using the concept of green chemistry. Algal Res. 2018, 35, 178–184. [Google Scholar] [CrossRef]
  111. Rodriguez, S.; Torres, F.G.; López, D. Preparation and characterization of polysaccharide films from the cyanobacteria Nostoc commune. Polym. Renew. Resour. 2017, 8, 133–150. [Google Scholar]
  112. Pignolet, O.; Jubeau, S.; Vaca-Garcia, C.; Michaud, P. Highly valuable microalgae: Biochemical and topological aspects. J. Ind. Microbiol. Biotechnol. 2013, 40, 781–796. [Google Scholar]
  113. Fattom, A.; Shilo, M. Production of emulcyan by phormidium J-1: Its activity and function. FEMS Microbiol. Lett. 1985, 31, 3–9. [Google Scholar] [CrossRef]
  114. Kanekiyo, K.; Hayashi, K.; Takenaka, H.; Lee, J.-B.; Hayashi, T. Anti-herpes simplex virus target of an acidic polysaccharide, nostoflan, from the edible blue-green alga Nostoc flagelliforme. Biol. Pharm. Bull. 2007, 30, 1573–1575. [Google Scholar] [CrossRef] [Green Version]
  115. Patel, S.; Goyal, A. Current and prospective insights on food and pharmaceutical applications of spirulina. Curr. Trends Biotechnol. Pharm. 2013, 7, 681–695. [Google Scholar]
  116. Fresewinkel, M.; Rosello, R.; Wilhelm, C.; Kruse, O.; Hankamer, B.; Posten, C. Integration in microalgal bioprocess development: Design of efficient, sustainable, and economic processes. Eng. Life Sci. 2014, 14, 560–573. [Google Scholar]
  117. Schipper, K.; Al Muraikhi, M.; Alghasal, G.S.H.S.; Saadaoui, I.; Bounnit, T.; Rasheed, R.; Dalgamouni, T.; Al Jabri, H.M.S.J.; Wijffels, R.H.; Barbosa, M.J. Potential of novel desert microalgae and cyanobacteria for commercial applications and CO2 sequestration. J. Appl. Phycol. 2019, 1–13. [Google Scholar]
  118. Schulze, P.S.C.; Hulatt, C.J.; Morales-Sánchez, D.; Wijffels, R.H.; Kiron, V. Fatty acids and proteins from marine cold adapted microalgae for biotechnology. Algal Res. 2019, 42, 101604. [Google Scholar] [CrossRef]
  119. Pereira, S.B.; Sousa, A.; Santos, M.; Araújo, M.; Serôdio, F.; Granja, P.; Tamagnini, P. Strategies to Obtain designer polymers based on cyanobacterial extracellular polymeric substances (EPS). Int. J. Mol. Sci. 2019, 20, 5693. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  120. Deschoenmaeker, F.; Bayon-Vicente, G.; Sachdeva, N.; Depraetere, O.; Pino, J.C.C.; Leroy, B.; Muylaert, K.; Wattiez, R. Impact of different nitrogen sources on the growth of Arthrospira sp. PCC 8005 under batch and continuous cultivation-A biochemical, transcriptomic and proteomic profile. Bioresour. Technol. 2017, 237, 78–88. [Google Scholar] [CrossRef]
  121. Dorina, S.; Judith, S.; Björn, W.; Julia, S.; Andrea, S.; Muffler, K.; Roland, U. A new strategy for a combined isolation of EPS and pigments from Cyanobacteria. J. Appl. Phycol. 2020, 35, 1–12. [Google Scholar] [CrossRef]
Applsci 10 03763 g001 550
Figure 1. Process flow chart for the extraction of EPS from cyanobacteria.
Figure 1. Process flow chart for the extraction of EPS from cyanobacteria.
Applsci 10 03763 g001
Table
Table 1. Isolated exopolysaccharides (EPS) from cyanobacteria.
Table 1. Isolated exopolysaccharides (EPS) from cyanobacteria.
StrainEPS FractionCompositional MonosaccharidesNon-Carbohydrates SubstituentsEPS CharacteristicReference
Aphanothece sacrumCPSGlc, Gal, Man, Xyl, Rha, Fuc, GalA, GlcAsulfate and carboxyl groupsanti-inflammatory; anti-allergic; adsorption of metal ions; liquid crystallization[32]
Cyanothece PCC 0010RPSMan, Glc, uronic acids, Gal, Xyl, Rha, Fuc Ara sulfate and acetate groups, peptidesthermostable, amorphous, pseudoplastic behavior[31]
Cyanothece sp. 113CPSD-Glc nd†[33]
Cyanothece sp. ATCC 51142RPS2-C-Me-Glc, Ido-2-C-Carboxylic acid, 2-deoxy-Idocalcium; sulfate groupsgel formation;
adsorption of metal ions		[34]
Nostoc commune DRH-1RPSdXyl, dGlc, dGal, dRib, GlcA, Man nd†[35]
Nostoc flagelliformeCPSGlu, Gal, Xyl, Man, GlcA anti-viral activity, negative
antithrombin activity		[36]
Nostoc insulareRPSAra, 3-O-Methyl-Ara, Glc, GlcA Nd†[37]
Nostoc sphaeroids kützCPSMan, Glc, Xyl, Gal, GlcA immunological activity[38]
Spirulina platensisCPSRha, Fru, Rib, Man, Gal, Xyl, Glc, GlcA, GalAsulfate groups, calciumanti-viral activity[39]
nd†: non-defined.
Table
Table 2. Compilation of screening conditions applied to Cyano-EPS based on their origin and order.
Table 2. Compilation of screening conditions applied to Cyano-EPS based on their origin and order.
OriginOrder (No. Strains)Screening Conditions
(Medium, Temperature, Light/Dark Cycle, Light Intensity, Air Supply/Mixing, Inoculum Conditions, Working Volume, Cultivation Days)		EPS TargetReference
Soil, Soil/water, Water, Plant symbiosisNostocales (40)BG110, 30 °C, L/D (24/0 h), 100 μE, 5% (v/v) CO2-air, agitation, axenic, working volume: 0.4 L, 10–15 daysRPS[40]
nd†Nostocales, Chroococcales, Synechococcales (15)BG110, 25 °C, L/D (16/10 h), 35 μE, L/D, axenic, working volume: 0.1 L, 44 daysRPS[44]
FreshwaterNostocales, Synechococcales, Oscillatoriales (25)Z medium 2x concentrated, 20 °C, L/D (24/0 h) 15 W/m2, 12-36 monthsRPS[45]
MarineOscillatoriales (4)modified f/2 plus sea mud extract, 29 °C, L/D (24/0 h), 2700 Lux, aeration, inoculum 8 × 105 –9 × 105 cells/mL, working volume: 0.05 L, 15 daysCPS[46]
Indo-Burma hotspotNostocales, Oscillatoriales (40)BG110/ BG11#, 28 °C, L/D (14/10h), 54–67 μE,
mixing 2x day, 50 mg of wet pellet, working volume: 0.1 L, 30 days		EPS[47]
Freshwater (Indo-Burma hotspot)Nostocales, Oscillatoriales (10)BG110/ BG11#, 28 °C, L/D (14/10 h), 54–67 μE,
mixing 2x day, 50 mg of wet pellet, working volume: 0.1 L, 30 days		CPS,
RPS		[48]
Marine microbial mat French PolynesiaOscillatoriales, Chroococcales, Synechococcales (6)Conway (Fed-batch), 32 °C, L/D (12/12 h), 300 μE, 0.125 (v/v/min) pH 8.35 (CO2 on demand), 250 rpm, 10% inoculum non-axenic, working volume: 2 L, 25–35 daysCPS,
RPS		[49]
Soil contaminated, Gujarat, India nd†Nostocales, Oscillatriales (4)BG11 and ASN III, 27 °C, L/D (12/12 h), 3 kLux. Axenic inoculum (chlorophyll a concentration to ∼2.0 mg/L), working volume 0.6 L, 30 daysRPS[50]
Eroded soils; wastewater treatment plant; sediments; Cabras LagoonNostocales, Oscillatoriales, Synechocchales, (7)BG110/BG11#, 18 °C, L/D (14:10 h), 18 μE, working volume 0.3 L, 25–30 days (until stationary phase)RPS[51]
Freshwater lakes, TurkeySynechocchales (3) BG11, 25 °C, L/D (12:12 h), 1200 μE, 100rpm, working volume: 0.1 L, 20 daysCPS[52]
Soil, gardenNostocales (3)BG110 and BG11, 30 °C, continuous illumination, 70–160 μE, aeration pH control (7–8.5) with CO2-air, working volume: 0.25 L, inoculum: chlorophyll a concentration of 1.5 mg/mL, 8–15 days (until stationary phase)RPS[53]
Miscellaneous / Culture Collections; hard sands Pantelleria island, Italy; Antarctic lake, AntarcticNostocales, Oscillatoriales (16)BG110/ BG11# or Allen and Arnon or alkaline medium, 25 °C or 11 °C (psychrophilic strains), 1.500 lux, aeration pH 7–8.5 (CO2 on demand), inoculum chlorophyll concentration 1.5 or 3 mg/mL, working volume: 1.5 L, 30 daysCPS,
RPS		[54]
Baltic Sea, Pacific Ocean, Atlantic Ocean, Mediterranean Sea, Red SeaSynechocchales, Spirulinales, Pleurocapsales, Nostocales, Chroococcales (16)PCR-11 medium, 20 °C, L/D (16:8 h), 150–300 μE, 120 rpm, working volume: 0.02 L, 30 daysRPS[41]
Nd†—non-defined. BG110/BG11#—nitrate source was excluded (BG110) for all heterocystous strains or maintained (BG11) for non-heterocystous.
Table
Table 3. Cyanobacterial EPS optimization studies on culture media and process parameters organized by order. Bold effects correspond to positive/or significant effect on EPS production.
Table 3. Cyanobacterial EPS optimization studies on culture media and process parameters organized by order. Bold effects correspond to positive/or significant effect on EPS production.
StrainsOptimization FactorEPS Titer/Productivity
/Yield
Culture Media Process ParametersLiterature
Nostocales
Anabaena augstmalis VRUC163nd†Fed-batch; Film forming PBR14.73 mg/g (CPS)[51]
Anabaena cylindrica 10 CN source (NaNO3)
Mixotrophy		nd†2.36 mg/L (RPS)[58]
Anabaena WSAFN source (absence; NaNO3); P source (K2PHO4); L/D cycle (continuous); Shear stress (aeration); 1.86 mg/L/day (EPS)[54]
Anabaena sp. ATCC 33047N source (N2, KNO3; NH4Cl); Salinity (NaCl/absence)Temperature; Light intensity (medium); Shear stress (high aeration); Dilution rate (0.03 h−1)1100 mg/L/day (RPS + CPS)[70]
Anabaena sp. BTA997nd†Initial pH (8.5)1.7 g/L (RPS)[48]
Anabaena turolosaN source (absence; NaNO3); P source (K2PHO4); L/D cycle (continuous); Shear stress (aeration); 0.73 mg/L/day[54]
Cyanospira capsulataC flux metabolism (glyoxylate; nitrogen inhibitor)nd†7.5 mg/L/day[99]
Nostoc flagelliformeN source (NaNO3); P source (K2PHO4);Temperature (low); Light intensity (high); Initial pH (alkaline) 14.29 mg/L/day (RPS) [57]
Nostoc flagelliformend†Cultivation mode (Fed-batch); pH (8–9)8.86 mg/L/day (CPS)[72]
Nostoc flagelliformend†light quality (monochromatic red, yellow, green, blue, purple)47.39 mg/g (RPS)[79]
Nostoc flagelliformend†light quality (white fluorescent and monochromatic red, yellow, green, blue, purple); Red light intensity (medium)275 mg/g (CPS)[80]
Nostoc flagelliformeC source (absence; NaHCO3); N source (absence; NaNO3)light quality (monochromatic red, blue)nd†[63]
Nostoc flagelliformeN source (Urea, NaNO3, NH4Cl; Arginine)Light intensity (low); Light quality (mixed wavelengths, red, blue, green); Wavelength shift 5.42 mg/L/day (RPS) [61]
Nostoc flagelliformeC source (glucose); Salinity (NaCl)nd†234.82 mg/g (CPS)[84]
Nostoc sp.nd†Light intensity (high)134.26 mg/g DW (RPS)[85]
Nostoc sp. BTA97 N source (NaNO3, absence);Initial pH (alkaline)53.3 mg/L/day (RPS + CPS)[47]
Nostoc sp. PCC 7413N source (NaNO3; presence/absence)Light intensity (low, high)150 mg L/day (RPS)[53]
Scytonema tolypothrichoidesnd†Temperature and light intensity crossed gradients310–360 mg/L (CPS)[77]
Tolypothrix bouteilleind†Temperature and light intensity crossed gradients186–216 mg/L (CPS)[77]
Oscillatoriles
Arthrospira platensis PCC 8005nd†Light intensity (low)nd†[86]
Arthrospira platensisC source (NaHCO3)nd†nd†[66]
Arthrospira platensis “Compére 1968/3786”nd†Temperature; Light intensity11.76 mg/L/day (RPS)[98]
Arthrospira platensis “Compére 1968/3786”Photoautotrophic (light), Mixotrophic (light, glucose), Heterotrophic (glucose) nd†26.4 mg/L/day (RPS)[68]
Cyanothece epiphytica AUS-JR/DB/NT-021N source (absence; NaNO3); Salinity (NaCl); Micronutrients (MgSO4); Ozonend†9.66 mg/L/day (RPS + CPS)[62]
Cyanothece sp. 113 N source (absence; NaNO3); Salinity (NaCl); Micronutrients (MgSO4; NaH2PO4)Aeration; Temperature; Light intensity; Time course1300 g/L/day (CPS)[46,65]
Cyanothece sp. CCY 0110C source (glycerol); N source (absence/combined); Salinity (NaCl); Micronutrients (MgCl2)Temperature; Light intensity; L/D cycle; shear stress (aeration)42.86 mg/L/day (RPS)[56]
Microcoleus vaginatusnd†Light intensity; 139 mg/g (RPS)[100]
Synechococcales
Limnothrix redekei PUPCCC 116N source (KNO3); Salinity (NaCl)nd†14.48 mg/L/day [59]
Oscillatoria formosaN source (KNO3); Salinity (NaCl); Micronutrients (CaCl2)Temperature (high); L/D cycles (14/10) 9.88 mg/L/day (RPS) [60]
Synechococcus sp.N source (N2, nitrate, combined/absence)Light intensity; L/D cycle330 mg/L/day[64]
Synechocystis sp. BASOSalinity (NaCl)nd†500 mg/L (CPS)[52]
Chroococcales
Cyanobacterium aponinumC source (5% CO2; NaHCO3)Temperature (high); Light intensity (high)20 mg/L/day (RPS)[76]
Spirulinales
Spirulina sp.N source (NaNO3); P source (K2PHO4); Salinity (NaCl)Temperature1.83 mg/L/day (EPS)[54]
nd†—non-defined. Levels of process parameters are in agreement with the associated literature in question. In some cases, Nitrogen did not produce significant effects which can be justified by the fact the control had a defined nitrogen concentration, for instance in situations where BG11 was used as control.

Share and Cite

MDPI and ACS Style

Cruz, D.; Vasconcelos, V.; Pierre, G.; Michaud, P.; Delattre, C. Exopolysaccharides from Cyanobacteria: Strategies for Bioprocess Development. Appl. Sci. 2020, 10, 3763. https://doi.org/10.3390/app10113763

AMA Style

Cruz D, Vasconcelos V, Pierre G, Michaud P, Delattre C. Exopolysaccharides from Cyanobacteria: Strategies for Bioprocess Development. Applied Sciences. 2020; 10(11):3763. https://doi.org/10.3390/app10113763

Chicago/Turabian Style

Cruz, Diogo, Vitor Vasconcelos, Guillaume Pierre, Philippe Michaud, and Cédric Delattre. 2020. "Exopolysaccharides from Cyanobacteria: Strategies for Bioprocess Development" Applied Sciences 10, no. 11: 3763. https://doi.org/10.3390/app10113763

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop