Next Article in Journal
Fe3O4-Water Nanofluid Free Convection within an Inclined 2D Rectangular Enclosure Heated by Solar Energy Using Finned Absorber Plate
Next Article in Special Issue
Effect of Hydrogen Addition on the Energetic and Ecologic Parameters of an SI Engine Fueled by Biogas
Previous Article in Journal
Effect of Temperature Changes on the Vibration Transmissibility of XPE and PE Packaging Cushioning Material
Previous Article in Special Issue
Expected Impacts of the Massive Increase in Electric Vehicles in Slovakia
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Design of Laboratory Test Equipment for Automotive Oil Filters to Evaluate the Technical Life of Engine Oil

1
Department of Transport and Handling, Faculty of Engineering, Slovak University of Agriculture in Nitra, Tr. A. Hlinku 2, 949 01 Nitra, Slovakia
2
The Slovak Legal Metrology (SLM), Hviezdoslavova 1124/31, 974 01 Banská Bystrica, Slovakia
3
Faculty of Agriculture in Novi Sad, University of Novi Sad, 21000 Novi Sad, Serbia
4
Faculty of Mechanical Engineering, UTP University of Science and Technology, Al. prof. S. Kaliskiego 7, 85-796 Bydgoszcz, Poland
*
Author to whom correspondence should be addressed.
Appl. Sci. 2021, 11(2), 483; https://doi.org/10.3390/app11020483
Submission received: 5 November 2020 / Revised: 29 December 2020 / Accepted: 2 January 2021 / Published: 6 January 2021
(This article belongs to the Special Issue Advanced Engine Technologies and Innovative Vehicle Driving Systems)

Abstract

The main aim of the article is to present the design of laboratory test equipment, which is appropriate for monitoring the efficiency of oil filters and the system for evaluating the technical life of engine oils in terms of possible extension of service intervals. The functionality of the designed laboratory test equipment for the filtration of motor oils was verified by a practical experiment with a verification measurement and assessment of the suitability of the hydraulic circuit elements and the designed sensing equipment. The laboratory equipment enables the testing of oil filters with different filtration capacity during simultaneous testing in two separate hydraulic circuits with differently contaminated engine oil, while it enables laboratory measurements to be performed while simulating operating conditions.
Keywords: laboratory test equipment; filter; hydraulic circuit; sensors laboratory test equipment; filter; hydraulic circuit; sensors

Share and Cite

MDPI and ACS Style

Ľubomír, H.; Juraj, J.; Jaromír, M.; Juraj, T.; Mirko, S.; Marcin, Z.; Romana, J. Design of Laboratory Test Equipment for Automotive Oil Filters to Evaluate the Technical Life of Engine Oil. Appl. Sci. 2021, 11, 483. https://doi.org/10.3390/app11020483

AMA Style

Ľubomír H, Juraj J, Jaromír M, Juraj T, Mirko S, Marcin Z, Romana J. Design of Laboratory Test Equipment for Automotive Oil Filters to Evaluate the Technical Life of Engine Oil. Applied Sciences. 2021; 11(2):483. https://doi.org/10.3390/app11020483

Chicago/Turabian Style

Ľubomír, Hujo, Jablonický Juraj, Markovič Jaromír, Tulík Juraj, Simikić Mirko, Zastempowski Marcin, and Janoušková Romana. 2021. "Design of Laboratory Test Equipment for Automotive Oil Filters to Evaluate the Technical Life of Engine Oil" Applied Sciences 11, no. 2: 483. https://doi.org/10.3390/app11020483

APA Style

Ľubomír, H., Juraj, J., Jaromír, M., Juraj, T., Mirko, S., Marcin, Z., & Romana, J. (2021). Design of Laboratory Test Equipment for Automotive Oil Filters to Evaluate the Technical Life of Engine Oil. Applied Sciences, 11(2), 483. https://doi.org/10.3390/app11020483

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop