1. Introduction
Since the pioneering Soviet missions of the Venera family, which were the first to successfully enter the atmosphere of Venus and make a soft landing on the planet, or NASA’s missions such as the Mariner 2 launched in the early 1960s and the Pioneer Venus Orbiter launched in the late 1970s [
1], and more recently, thanks to the ESA’s Venus Express mission and the ESA/JAXA’s BepiColombo, which is currently on an interplanetary flight to its target planet, the exploration of Venus’s induced magnetosphere and the related magnetotail has provided useful data to better understand the complex Sun–Venus connection, and how the solar wind interacts with the upper atmosphere of the second Solar System’s planet [
2,
3]. In fact, the particular physical origin of Venus’s magnetic field [
4], which originates from the interaction of the solar wind stream of charged particles with the ionized atoms that populate the planet’s upper atmosphere, differentiates Venus’s magnetotail from that of magnetized planets as, for example, the Earth [
5]. In this context, the artistic impression in
Figure 1 schematically describes the differences between the induced magnetosphere of Venus (and Mars) and that of the Earth.
Over the decades, Venus has been the study object (or a flyby planet on its way to the final target) of several interplanetary spacecraft. For example, NASA’s Pioneer Venus Orbiter observed the central region of Venus’s magnetotail at a distance between
and
[
6], where
is Venus’s mean radius, while the ESA’s Venus Express observed a downstream region of the magnetosphere at a distance of roughly
, due to the high orbital inclination of that space probe with respect to the equatorial plane of the planet [
7,
8].
Figure 2 shows an artistic impression of the Venus Express spacecraft approaching the planet on its successful science mission, which ended in early 2015. More recently (i.e., in October 2020 and August 2021), the two Venus flybys of the ESA-JAXA’s BepiColombo spacecraft provided new and interesting data regarding both the physical composition of the planet’s upper atmosphere and the structure of its induced magnetosphere [
9,
10].
To date, however, a systematic and in situ exploration of Venus’s comet-like induced magnetotail has not been performed. In fact, a continued and long-term probing of the physical characteristics of the trailing part of a magnetosphere usually requires a continuous-thrust propulsion system, which is able to change the orientation of a suitable elliptic (planetocentric) orbit whose apocytherion lies inside the planet’s magnetotail. Consequently, the continuous and prolonged application of propulsive acceleration indicates that this type of mission requires a considerable velocity change, which, in turn, makes them difficult to achieve using a conventional thruster whose capabilities are constrained by the mass of storable propellant on board.
A possible solution, in this respect, is offered by a propellantless propulsion system. In fact, propellantless thrusters, such as the well-known photonic solar sails [
11,
12,
13], the exotic Magnetic Sails proposed by Zubrin and Andrews in the early 1990s [
14,
15], the more recent Electric Solar Wind Sails invented by Janhunen in 2004 [
16,
17,
18], or the advanced Solar Wind Ion Focusing Thrusters (SWIFTs) recently proposed by Gemmer et al. [
19,
20,
21], theoretically allow for extremely complex space missions that require a very high value in terms of the velocity change [
22,
23]. In this specific case, keeping in mind that the spacecraft flies (and, therefore, the propellantless thruster operates) inside the planet’s magnetosphere, the only possible option among those just indicated consists of the use of a photonic solar sail [
24].
For this reason, the use of a small (reflective) solar sail as the primary propulsion system was proposed roughly 20 years ago during the preliminary design of the GeoSail mission concept [
25], the aim of which was to create a geocentric orbit capable of enabling the in situ sensing of the Earth’s upper magnetosphere. To this end, it was proposed to use the propulsive acceleration induced by the reflective solar sail to achieve an artificial precession of the apsidal line of an assigned (elliptic) geocentric orbit, so as to maintain the apogee within the Earth’s magnetotail over time. In this context, thanks to the pioneering studies of McInnes et al. [
26], it was demonstrated that such artificial precession could be achieved using a low-performance reflective solar sail with a substantially constant attitude with respect to the direction of propagation of the solar rays [
27,
28]. This interesting result was then subsequently refined by the author using an optimized guidance law [
29,
30] or a suitable on/off control strategy [
31], which allows the mission concept to be extended to smart dust with an electrochromic control device. More recently, as a valid alternative to the classical reflective sails, solar sails with advanced metamaterial films have been proposed. This is, for example, the case of the so-called refractive sails [
32,
33,
34], or the interesting diffractive sails whose performance has been thoroughly investigated by Swartzlander et al. [
35,
36,
37,
38]. The interesting aspect of a diffractive or a refractive sail is the possibility of generating a transverse component of the propulsive acceleration even with a Sun-facing orientation, that is, an orientation in which the direction of the solar rays is perpendicular to the nominal plane of the thin sail membrane [
39,
40]. Such a Sun-facing attitude can be maintained passively through a suitable design of the sail’s external structure, i.e., by providing a slightly conical form with the apex directed to the Sun [
41].
Taking inspiration from the GeoSail concept, and leaving the study of the performance of diffractive or refractive sails to future works, this study analyzes the performance of a reflective solar sail-based spacecraft in (artificially) precessing the apse line of a high-elliptic orbit around Venus with the aim of exploring the planet’s induced magnetotail. In particular, the solar sail-induced propulsive acceleration vector allows a scientific probe to obtain long-term residence within the induced magnetotail of the planet. The mission concept is schematized in
Figure 3, which shows how the apse line of the spacecraft’s planetocentric orbit remains substantially aligned with the Sun–Venus direction during the flight. In particular,
Figure 3 indicates that the plane
of the spacecraft’s science (planetocentric) orbit coincides with the plane of the heliocentric orbit of Venus. Bearing in mind that the axial tilt of Venus is roughly
, one can infer that
substantially coincides with the equatorial plane of the planet. Note that, in
Figure 3, the orbit of Venus around the Sun is assumed to be circular with a radius
so that the planet moves in its heliocentric orbit with a constant angular velocity equal to
, where
is the Sun’s gravitational parameter.
In this study, the orientation of the reflective solar sail with respect to a classical orbital reference frame is assumed to be fixed. In particular, a Sun-facing configuration is assumed, while the required propulsion system’s performance is evaluated as a function of the characteristics of the elliptic science orbit, that is, the value of the pericytherion radius
and the apocytherion radius
[
42,
43]. In this context, as discussed in detail in
Section 2, the required thruster performance parameters (in terms of the value of the reference, characteristic, and propulsive acceleration magnitude) are obtained by using both a simplified mathematical model of the spacecraft’s planetocentric dynamics and a semi-analytical approach, which allows the reference propulsive acceleration to be easily written, in a closed compact form, as a function of
and
. The numerical results illustrated in
Section 3 show that a medium–low-performance sail is able to artificially precess the apse line of a medium–high-elliptic orbit around Venus, in order to ensure the long-term sensing of the planet’s induced magnetotail. The performance analysis in
Section 3 is conducted parametrically using the two geometric terms
as design parameters, while a set of curves is obtained to quickly determine the required value of the sail-induced (reference) propulsive acceleration magnitude. The last part of
Section 3 briefly describes the analysis of the effects of the eclipse period on the mission performance, by using a simplified (cylindrical) model of the Venus-induced shadow. Finally, as usual, the last section includes the conclusions of this study.
2. Mission Description and Simplified Mathematical Model
In this section, the dynamics of the solar sail-based spacecraft in its motion around Venus are described using the simplified approach proposed by McInnes et al. [
26]. More precisely, assuming a two-dimensional scenario in which the spacecraft and Venus move around the Sun along the same plane
introduced in the previous section, the solar sail dynamics along the planetocentric, elliptic, science orbit is described by the following four simplified Lagrange planetary equations (in Gaussian form) [
44]:
which are consistent with the set of equations used in Ref. [
31], where
is Venus’s gravitational parameter, while
In particular, Equations (
1)–(
4) give the variation with the true anomaly
of the spacecraft’s osculating orbit semimajor axis
, eccentricity
, time
of passage from the pericytherion, and argument of pericytherion
. The latter is measured counterclockwise from a fixed direction, which coincides with the Venus–Sun line at the initial time
. In Equations (
1)–(
4), the term
r is the Venus–spacecraft distance, while
(or
) is the radial (or transverse) component of the solar sail-induced propulsive acceleration vector
. In particular, the radial component of vector
is directed along the Venus–spacecraft line, while the transverse component
is positive when
, where
is the spacecraft’s velocity vector in its motion around Venus.
The four first-order differential Equations (
1)–(
4) are completed by four initial conditions, that is, four scalar conditions at the initial true anomaly
. In this context, without losing generality, we assume that, initially, the science orbit apse line is aligned with the Venus–Sun direction, so that the initial value of
is zero; this situation is illustrated in
Figure 4, where the pericytherion radius
, the apocytherion radius
, and the mean radius of Venus
are indicated. Accordingly, the four initial conditions are as follows:
The spacecraft equations of motion and the initial conditions given by the previous equation are more conveniently rewritten in a dimensionless form by introducing the following (dimensionless) terms:
with
In the remainder of the paper, the dimensionless version of a generic variable will be indicated with the tilde superscript.
According to Equation (
7), the dimensionless version of the spacecraft’s equations of motion is as follows:
while the initial conditions given by Equation (
6) become
2.1. Solar Sail Thrust Components with Sun-Facing Orientation
To complete the Cauchy problem given by Equations (
9)–(
13), it is necessary to assign the control law that provides the variation with the true anomaly
of the two components
of the dimensionless propulsive acceleration vector
given by the solar sail. In this respect, taking into account the numerical results of Ref. [
26], we consider a fixed orientation of the solar sail nominal plane (i.e., the plane of the thin reflective membrane when sail billowing is neglected) with respect to the Sun–spacecraft line during the entire flight along the science orbit. In this context, paralleling the procedure described in Ref. [
31], we assume that the solar sail’s orientation is Sun-facing, that is, the sail nominal plane is perpendicular to the Sun–spacecraft line at any time instant [
26]. This situation is schematized in
Figure 5, which also shows the two dimensionless components (i.e., the radial and transverse components) of the propulsive acceleration vector
in a generic point of the spacecraft’s science orbit.
In this case, bearing in mind that during the flight, the Sun–spacecraft distance is substantially constant and equal to
, neglecting the eclipse period experienced during the flight, and observing that the direction of the sun rays is parallel to the science orbit apse line (recall that the Sun belongs to that line; see the scheme in
Figure 4), one has the following expressions of the two components
:
where
is a reference distance that coincides with the Sun–Earth mean distance, and
is the dimensionless version of the sail characteristic acceleration
, which is the typical performance parameter in the trajectory design of a solar sail-based space vehicle when the optical degradation of the reflective film is neglected [
45]. Note that Equations (
14) and (
15) indicate the effect of the solar radiation pressure (i.e., the thrust vector induced by the solar sail) on the motion of the spacecraft around the planet, according to the typical results in the literature. In particular, recall that
is defined [
46,
47] as the maximum value of the magnitude of the solar sail-induced propulsive acceleration vector when the distance from the Sun is equal to
. Note that, given the same sail design characteristics (as, for example, the sail area, the mass breakdown, and the reflective film performance), the use of a solar sail propulsion system in a Venus-centered mission scenario allows for an increase of
the maximum magnitude of the propulsive acceleration vector compared to the case of an Earth-centered application. However, in a Venus-centered scenario, the solar sail must be able to rotate the science orbit apse line faster than in a classical Earth-centered scenario. In fact, in a Venus case, the apse line should be rotated about
to maintain the apocytherion inside the planet’s induced magnetotail (recall that the orbital period of Venus is roughly
, so
), while in a geocentric case, the required rotation rate is slightly less than
.
The effects on the spacecraft’s planetocentric dynamics of the simplified control law given by Equations (
14) and (
15), which are shown in
Figure 6, have been accurately studied in Ref. [
26]. In particular, McInnes et al. [
26] indicated that the simple control law (
14) and (
15) allowed the authors to obtain an averaged value equal to zero regarding both the semimajor axis and the eccentricity over a complete revolution of the spacecraft around the planet. This result can be easily obtained by substituting Equations (
8), (
14), and (
15) into Equations (
9) and (
10) and observing that
and
are odd functions of the true anomaly. On the other hand, that proposed control law gives a non-zero net variation (over a single revolution around the planet) considering the argument of pericytherion
. Therefore, this specific characteristic of the simple control law given by Equations (
14) and (
15) can be used to obtain a (target) value of
, which allows the science orbit apse line to be aligned again with the Venus–spacecraft direction at the end of the generic revolution around the planet.
Bearing in mind that the initial value of
is zero and observing that the azimuthal angle
traveled by Venus’s center of mass along its heliocentric (circular) orbit in a time interval
is simply
, the following final condition is derived at the true anomaly
:
where
is the time instant at the end of the spacecraft revolution around the planet, and Equation (
7) is used to express the dimensionless version of the flight time. In fact, recall that the final values of both
and
e, i.e., the values at the end of the revolution around the planet, correspond to their initial value [
26]. In other terms, for a given value of the dimensionless pair
, which defines the characteristics of the planetocentric science orbit, the scalar constraint given by Equation (
16) can be reached by selecting a suitable value of the (dimensionless) sail characteristic acceleration
. In this respect, the required value of
can be obtained through a simple numerical procedure described in
Section 3, where the Cauchy problem is transformed to a sort of root-finding problem, which is then solved using a standard numerical procedure.
However, the specific characteristics of the spacecraft’s planetocentric dynamics and the simple form of the proposed control law given by Equations (
14) and (
15), allow the designer to obtain a rapid estimate of the required (dimensionless) sail characteristic acceleration
by using an approximate, elegant, analytical approach. This simplified mathematical model is illustrated in the next subsection.
2.2. Performance Approximation through a Simple Analytical Approach
This section illustrates an analytical procedure to obtain an accurate approximation of the value of the dimensionless characteristic acceleration required to reach the desired rotation
of the science orbit apse line; see the scalar constraint described by Equation (
16).
The analytical procedure is based on the assumption that, during the generic revolution of the spacecraft around Venus, the values of
a and
e remain sufficiently close to the assigned
and
, respectively. In fact, the specific form of the control law given by Equations (
14) and (
15) allows the semimajor axis and the eccentricity of the osculating orbit to return to their initial values at the end of the spacecraft’s revolution around the planet. Bearing in mind Equations (
8), (
14) and (
15), when the conditions
and
are enforced in Equation (
11), the result is as follows:
The previous equation can be easily integrated into the interval
to obtain an analytical approximation of
, that is, the variation in the argument of pericytherion during a single spacecraft’s revolution around Venus. In this case, one has the following:
which is, indeed, a linear function of the sail performance parameter
. Observing that
is approximated by the (dimensionless) orbital period of the science orbit, viz.,
from Equations (
16), (
18), and (
19), one easily obtains the analytical approximation of the required (dimensionless) characteristic acceleration as follows:
The dimensional value of the required characteristic acceleration
, in
, is then obtained from the previous equation as follows:
Note that the denominator of Equations (
20) and (
21) coincides with the square root of the dimensionless semilatus rectum of the (elliptic) science orbit. The expression of
(or equivalently that of
) given by Equation (
20) can be used to quickly estimate the required sail performance as a function of the characteristics of the spacecraft’s science orbit around Venus. The accuracy of the proposed approximate model is investigated in the next section.
3. Numerical Simulations and Results
The mathematical model described in the previous section is employed to determine the required solar sail propulsive performance in a reference mission scenario. In this respect, the characteristics of the science orbit described in Ref. [
48] are used as a potential case study. In particular, Albers et al. [
48] considered an elliptic (science) orbit around Venus with a pericytherion radius
and an apocytherion radius
, so the dimensionless (reference) initial values of the semimajor axis
and the eccentricity
are as follows:
According to Equation (
21), the approximate value of the solar sail dimensionless characteristic acceleration required to obtain the desired rotation of the apse line is
, which corresponds to a dimensional value
. For example, NASA’s proposed Solar Cruiser mission [
49] was planned to employ a solar sail-propelled spacecraft with a characteristic acceleration of about
.
Such a value of
is used to initialize a numerical procedure through which the actual value of the characteristic acceleration is determined using a routine based on the classical shooting method [
50]. In particular, the procedure involves the numerical integration of Equations (
9)–(
12) with the initial conditions (
13) in the range
, by using a PECE solver with an absolute and relative tolerance of
. The output of the numerical procedure gives the actual value of the dimensionless characteristic acceleration
, which corresponds to
. The numerical results indicate that the analytical approximation given by Equation (
20) allows the actual value of
to be accurately estimated.
The numerical solution (i.e., the numerical integration) of the Cauchy problem with the right value of
also gives the
-variation in the spacecraft’s osculating orbit characteristics. In this context,
Figure 7 shows the variation in
considering the argument of pericytherion
during the spacecraft’s revolution around Venus (the black line). The same graph also indicates, as shown with the red dashed line, the angle of rotation of the Sun–Venus line given by the product
. Note how the two lines coincide both at the beginning (by construction) and at the end (as required) of the spacecraft’s revolution around the planet.
Finally, the
-variation considering the dimensionless semimajor axis and the eccentricity is reported in
Figure 8, where one can observe that both
and
e (1) remain close to the reference value
during the entire flight and (2) return to their initial values at the end of the revolution around Venus. This aspect confirms the effectiveness of the simple (Sun-facing) solar sail control law given by Equations (
14) and (
15) and the validity of the hypotheses underlying the approximate expression of
given by Equation (
20).
Finally, the numerical procedure was used to perform a parametric study of the variation in the required (dimensional) characteristic acceleration
with the value of the pericytherion and apocytherion radii. The results are shown in
Figure 9 when
and
. Note that the condition
corresponds to a
increase in the reference values assumed in Ref. [
48].
Figure 9b indicates that a suitable rotation of the science orbit apse line can be obtained with a medium–low-performance solar sail. For example, the pairs
, which give a required characteristic acceleration
, are shown in
Figure 10.
Effects of the Eclipse Period
In this last part of the section, we analyze the effect of the presence of an eclipse period on mission performance during the revolution of the solar sail-based spacecraft around Venus. In particular, we use a simplified cylindrical model for the shadow induced by the planet, as schematized in
Figure 11, which neglects the presence of penumbra zones [
51].
During the eclipse period, that is, when the spacecraft covers the orange arc near the apocytherion shown in
Figure 11, the propulsive acceleration due to the solar sail is zero, and the vehicle’s motion is substantially Keplerian. This corresponds to setting
and
in the equations of motion when the eclipse condition occurs. In this case, the numerical procedure used to find the required value of the characteristic acceleration yields the results summarized in
Figure 12. As expected, the presence of an eclipse period during the flight increases the required value of the characteristic acceleration compared to the ideal case of full illumination during the orbit, for a given pair
. For example, considering again the characteristics of the science orbit indicated in Ref. [
48], one has
when the shadowing effects are considered in the simulation, while the value of the characteristic acceleration is roughly
in the ideal (full-illumination) case. In that case, the
-variation of angle
is shown in
Figure 13, in which one can observe the presence of a coasting arc (i.e., the horizontal flat segment) near the apocytherion point of the nominal science orbit.