Next Article in Journal
Improving Agar Degradation Activity of Vibrio natriegens WPAGA4 via Atmospheric and Room Temperature Plasma (ARTP)
Previous Article in Journal
Construction of a Real-Time Forecast Model with Deep Learning Techniques for Coastal Engineering and Processes: Nested in a Basin Scale Suite of Models
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
This is an early access version, the complete PDF, HTML, and XML versions will be available soon.
Article

Nonlinear Soil–Pile–Structure Interaction Behaviour of Marine Jetty Structures

by
Marios Koronides
1,
Constantine Michailides
2,* and
Toula Onoufriou
1
1
Department of Civil Engineering and Geomatics, Cyprus University of Technology, Limassol 3036, Cyprus
2
Department of Civil Engineering, International Hellenic University, 621 24 Serres, Greece
*
Author to whom correspondence should be addressed.
J. Mar. Sci. Eng. 2024, 12(7), 1153; https://doi.org/10.3390/jmse12071153
Submission received: 16 June 2024 / Revised: 28 June 2024 / Accepted: 4 July 2024 / Published: 9 July 2024
(This article belongs to the Special Issue Mobile Offshore Drilling Unit)

Abstract

Nonlinear soil–pile–structure interaction (SPSI) phenomena are known to play a vital role in the response of bottom-fixed marine structures. For such structures, these phenomena are commonly considered by the imposition of p-y, τ-z, and q-z springs, representing the lateral and axial shaft and axial base soil resistances, respectively. The importance of each resistance mechanism depends on the type of foundation system, with only very limited studies investigating their roles in the response of piled marine structures, such as jetties. Within this context, this study presents numerical three-dimensional pushover analysis results for two marine jetties, a smaller model with four piles and a larger model supported by twenty-four piles. SPSI effects are considered through p-y, τ-z, and q-z springs, the behaviours of which are determined by following commonly employed procedures. The structures’ responses are investigated under the influence of various assumptions regarding the behaviours of springs, as well as steel plasticity. The current investigation underscores the substantial influence of the axial soil–pile interaction on the response of the jetty, particularly in terms of its failure mode. Moreover, it demonstrates the importance of incorporating p-y springs, even though the choice between their linear or nonlinear constitutive behaviour is found to be less critical. Finally, the study concludes that the behaviours of the springs significantly affect the system’s ductility and the degree of steel yielding in the piles, while also highlighting the unconservative influence of neglecting SPSI phenomena.
Keywords: marine structures; marine jetties; soil–pile–structure interaction; finite element analysis; pushover simulations; τ-z, q-z, and p-y springs; axial soil–pile interaction; steel plasticity; ductility marine structures; marine jetties; soil–pile–structure interaction; finite element analysis; pushover simulations; τ-z, q-z, and p-y springs; axial soil–pile interaction; steel plasticity; ductility

Share and Cite

MDPI and ACS Style

Koronides, M.; Michailides, C.; Onoufriou, T. Nonlinear Soil–Pile–Structure Interaction Behaviour of Marine Jetty Structures. J. Mar. Sci. Eng. 2024, 12, 1153. https://doi.org/10.3390/jmse12071153

AMA Style

Koronides M, Michailides C, Onoufriou T. Nonlinear Soil–Pile–Structure Interaction Behaviour of Marine Jetty Structures. Journal of Marine Science and Engineering. 2024; 12(7):1153. https://doi.org/10.3390/jmse12071153

Chicago/Turabian Style

Koronides, Marios, Constantine Michailides, and Toula Onoufriou. 2024. "Nonlinear Soil–Pile–Structure Interaction Behaviour of Marine Jetty Structures" Journal of Marine Science and Engineering 12, no. 7: 1153. https://doi.org/10.3390/jmse12071153

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop