1. Introduction
In order to enhance the consumption of fossil fuels and alleviating the environmental crises, modern nanotechnology suggested some effective resources based on the interaction of nanoparticles. In fact, the improvement of energy resources by using traditional techniques results in some serious environmental crunch like global warming, depletion of ozone layer and emission of CO
2 and CO. Therefore, scientists are devoted to providing renewable and clean sources for enhancement of energy to the society. On this end, nanofluids have been commenced to cope with this issue effectively. The nanoparticles, due to excellent thermophysical features are proffered for heat transfer performances associated with diverse engineering and mechanical industries. Owing to the higher thermal performances, the nanoparticles attain a valuable scientific significance in the field of engineering, chemical and mechanical industries and biomedical applications like diagnosis of various diseases, chemotherapy, artificial lungs, destroying of damage tissues, etc. The nanoparticles are a mixture of metallic particles with base liquid which was first suggested by Choi [
1] in 1995. Based on experimental computations, Choi [
1] proved that the thermal performance of relatively poor working liquid like water is enhanced with proper utilization of such nanoparticles. This amusing idea has been widely justified by numerous contributors in order to examine heat transportations in diverse flow situations. Later on, Buongiorno [
2] determined the convective transport of nanoparticles with evaluation of Brownian motion and thermophoretic features. Azam et al. [
3] utilized the slip features in the flow of Carreau nanoparticles over a moving configuration where non-similar computation has been carried out numerically. Alblawi and co-workers [
4] addressed the thermophysical of nanoparticles by using Buongiorno nanofluid model in a curved stretched geometry. The interaction of four types of nanoparticles immersed in the base liquid with additional features of magnetic field was numerically attributed by Elgazery [
5]. Hayat et al. [
6] imposed the novel convective transport constraints for an unsteady flow of Jeffrey nanoparticles where solution was depicted via convergent algorithm. The Hall effects in the two-phase flow of dusty nanofluid have been reported by Gireesha and co-workers [
7]. They used Khanafer-Vafai-Lightstone (LVL) model to distinguish the important consequences of effective thermal viscosity and nanoparticle viscosity. Hashim et al. [
8] performed a numerical based continuation for the flow of non-Newtonian nanoparticles over a stretched surface. An interesting continuation in a similar direction was performed by Waqas et al. [
9] which dealt with the flow of Maxwell viscoelasticity-based micropolar nanofluid over a porous surface. They developed a numerical solution for the dimensionless flow problem via shooting procedure. Turkyilmazoglu [
10] examined the two-phase flow of nanoparticles over a circular jet. The peristaltic transport in the flow of nanoparticles under additional effects of hall and ion-slip was focused by Rafiq et al. [
11]. Tlili et al. [
12] simulated convective flow of nanoparticles in the circular cylinder influenced by applied magnetic force. Some more recent studies on this topic organized by numerous investigators can be found in references [
13,
14,
15,
16,
17,
18].
Recently, valuable work on the flow of non-Newtonian has been presented by various investigators because of their exceptional importance in various manufacturing and chemical industries, nuclear industries, bio-engineering, geophysics, and material processing. Many industrially important liquids like slurries, emulsion and polymer solutions attained a relatively convoluted rheological structure like shear thickening, shear-thinning, elasticity and extraordinary hardening associated with the flow. On this end, the importance of non-Newtonian fluids is still challenging and therefore, various non-Newtonian models are proposed in the literature to illustrate their complex rheological perspective. Among these non-Newtonian fluids, Oldroyd B is one that captures simultaneous relaxation and retardation features. Oldroyd B fluid also enables to explain of the creep and normal stress differences which is associated with simple shear flow. However, Oldroyd B fluid does not describe the shear thickening and shear thinning features, unlike other polymeric materials. Oldroyd-B fluid includes the substantial viscoelastic applications for Maxwell fluid and viscous fluid as a limiting case. Due to such prestigious consequences, a detailed scientific contribution based on the flow of Oldroyd-B fluid is inspected in the existed literature [
19,
20,
21,
22,
23,
24,
25,
26].
The macroscopic convective fluid particle movement results from the variation in the density gradient are termed as bioconvection. The macroscopic motion is encountered due to collective motile microorganisms swimming which altered the density of base fluid. The phenomenon of bioconvection accomplished wide range applications in biological sciences, biotechnology and bio-microsystems like enzyme biosensors and microfluidic devices. The bioconvection also plays a valuable role in mechanical engineering where an electric field is used to organize the bioconvection process for producing mechanical power resources and energy. Further, another attractive characteristic of bioconvection is when nanoparticles are accumulated with microorganisms, it enhanced the stability and mass transportation of nanoparticles. The first and foremost contribution to the bioconvection of microorganisms in existence of nanoparticles was successfully investigated by Kuznetsov [
27,
28]. Based on such useful contributions, it was verified that an enhanced truncation in the stability of nanoparticles may be possible via gyrotactic microorganisms phenomenon. Chakraborty et al. [
29] added the effects of magnetic field in the bioconvection flow of nanoparticles considered over a convective heat configuration. The flow of nanofluid influenced by a strong magnetic force in the presence of gyrotactic microorganisms has been examined by Alsaedi et al. [
30]. Another interesting work on this topic deals with the convective movement of nanoparticles which encountered the effects of gyrotactic microorganisms that have been determined numerically by Khan et al. [
31]. Xun and co-workers [
32] analyzed the combined features of time-dependent thermal conductivity and viscosity in bioconvection flow of nanofluid in a rotating frame. Beg et al. [
33] find out the numerical simulations in the flow of non-Newtonian nanoparticles in a free stream where the effects of microorganisms are also utilized. Recently Waqas et al. [
34] studied the phenomenon of motile gyrotactic microorganism in Falkner-Skan flow magnetized nanoparticles over a stretching surface. The thermally developed flow of Williamson nanoparticles in the presence of gyrotactic microorganisms and Newtonian boundary constraints was analyzed by Zaman and Gul [
35]. Rehman et al. [
36] summarized the flow of water-based nanoparticles with gyrotactic microorganisms over a vertically moving geometry. Bhatti et al. [
37] simulate the flow of viscous nanoparticles over a stretching cylinder in the presence of thermal radiation and heat absorption/generation features.
After examining the literature survey presented above, it is noticed that no contribution has been devoted to revealing the flow of Oldroyd-B nanofluid over a stretched cylinder in the presence of gyrotactic microorganisms, activation energy, and thermal radiation effects. The proposed analysis has been performed with the simultaneous second order slip features and convective boundary assumptions [
38,
39,
40,
41,
42,
43]. The interaction of second order slip (Wu’s slip) is quite different from the first order slip as it results two slip parameters that can effectively control the development in boundary layer. This condition is applied in order to make the model more realistic and practical. In fact, the present study is the extension of Irfan et al. [
21] in three directions, first by considering the phenomenon of bioconvection, second by introducing the effects of activation energy and third by utilizing the second order slip features. The highly coupled nonlinear boundary value problem is numerically simulated with the shooting procedure. Later on, each physical parameter is expansively expressed with relative physical consequences.
2. Physical Model
We assume a two-dimensional radiative flow of Oldroyd-B fluid with addition of nanoparticles over a stretched cylinder of radius
Following the cylindrical polar coordinates
the
axis is taken in the radial direction while
axis is assumed along the cylinder axis. The effects of magnetic fields are utilized in
axis. Owing to the smaller Reynolds number assumptions, the induced magnetic field effects are ignored (see
Figure 1). Let
T,
, and
denotes the nanoparticles’ temperature, concentration, and microorganism, respectively. The nanoparticles concentration and motile organisms near the surface are expressed with
and
respectively. Further, far away from the surface, the nanoparticles concentration is symbolized by
and motile microorganisms is expressed by
The constitutive equation for Oldroyd B fluid can be represented as [
19].
where
is stress tensor,
represents the pressure,
is identity vector,
relates the extra stress tensor,
is dynamic viscosity,
relaxation time,
retardation time while
is Rivlin-Ericksen tensor which is defined as
where
is the velocity vector. Since we have considered the steady-state flow problem, therefore, time derivative terms disappear. The continuity, momentum, thermal heat, concentration, and gyrotactic microorganism’s equations are expressed as [
21,
37,
44].
The developed flow is examined under the following boundary assumptions.
We introduced the slip effects of the second order as follows [
38,
39,
40,
41,
42].
where
is the relaxation time coefficient,
represents the retardation time,
is magnetic field strength,
denotes electrical conductivity,
is gravity,
stands for liquid density,
signify motile microorganism particles density,
determine volume concentration of magnetic particles,
is density of microorganism,
represents the convective fluid temperature,
is heat transfer coefficient,
determine nanoparticles density,
is nanoparticles temperature,
is thermal diffusivity,
being Brownian motion constant,
thermophoretic diffusion coefficient,
speed of gyrotactic cell,
notify the Knudsen number,
A and
B stands for constant,
chemotaxis constant,
molecular mean path,
accomplished momentum coefficient. It is remarked that second order slip appeared in Equation (8) is termed as Wu’s slip condition which has already been used by numerous researchers [
38,
39,
40,
41,
42].
In order to modify Equation (7) for thermally developed flow, the expression based on Rosseland approximation can be expressed as [
22].
where
is the Stefan-Boltzmann constant while
represents the mean absorption coefficient.
Before computing the numerical solution, let us convert the flow equations in dimensionless form by inserting the following variables [
21,
37,
43,
44].
where
is similarity variable,
is the characteristic length while
and
are dimensionless quantities. Operated above transformations in the governing flow equations, we result in following dimensionless forms [
21,
37,
44].
where
is constant curvature parameter,
denotes the Deborah number in terms of relaxation time [
31],
is Deborah number in terms of retardation time,
Hartmann number,
mixed convection parameter,
Rayleigh number,
is buoyancy ratio constant,
thermophoresis parameter,
denoted the Brownian motion,
thermal radiation parameter,
is Prandtl number,
is the Lewis number,
denotes the Biot number,
is the Peclet constant,
Lewis number,
is bioconvection constant,
is the first order slip constant while
determines the second order slip constant.
It is remarked that for , the fluid model is converted to Maxwell fluid model while results viscous case.
In order to determine the rate of heat transfer, rate of mass transfer and gyrotactic microorganism transfer, we defined local Nusselt number, local Sherwood number and motile density number with following expressions:
where
is symbolized as heat flux,
is mass flux and
represents the motile flux, which are defined below
where
is the Reynolds number [
21],
is local Nusselt number,
is local Sherwood number while
determined the motile density number.
4. Analysis of Results
After successfully computing the numerical simulation [
45,
46,
47,
48,
49,
50,
51,
52], now we examine the flow mechanism of various engineering parameters like constant curvature parameter
, Deborah number in terms of relaxation time
, Deborah number in terms of retardation time
, Hartmann number
, mixed convection parameter
, Rayleigh number
, buoyancy ratio constant
thermophoresis parameter
Brownian motion
thermal radiation parameter
Prandtl number
Lewis number
Biot number
, Peclet constant
, Lewis number
, bioconvection constant
, first order slip constant
and second order slip parameter
on the distribution of velocity
, temperature
, concentration
and motile microorganisms
Following to the traditional theoretical scientific contributions for similar analysis, we have allocated some fixed value to each physical parameter like
and
. It is remarked that for present flow problem, the viscosity of fluid is assumed to be constant and all the graphical analysis has been performed with this fact for all parameters. The physical illustration of Hartmann number
and mixed convection parameter
on
has been visualized in
Figure 2. The velocity distribution truncated with
as being an interaction of Lorentz force which is of resistive nature and subsequently reduced the movement of fluid particles. On contrary, an enhanced distribution of
has been observed for leading values of
The graphical computations are performed in
Figure 3 which deals with the impact first order slip parameter
and buoyancy ratio parameter
on
With variation of
the alteration in
shows a decreasing trend due to presence of buoyancy forces which retarded the movement of fluid particles effectively. Similarly, the presence of the slip factor also declined the velocity of the particles near the surface.
Figure 4 depicts the variation for the progressive values of Rayleigh number
and second order slip factor
on velocity distribution
. With variation of both parameters, a decrement in the velocity distribution is observed. With utilization of second order slip consequences also leads to being a depressed velocity profile.
In order to examine the fluctuation in nanoparticle temperature
against different values of Hartmann number
and mix convection parameter
Figure 5 is presented. While observing the variation in
with
an improved nanoparticle temperature is originated due to the evaluation of Lorentz force. The implementation of a strong magnetic force slightly enhanced the nanoparticles’ temperature and concerned boundary layer. However, quite opposite observations were being found due to the alteration of
. The mixed convection parameter is usually related to the Grashoff number which boosts up nanoparticle temperature efficiently.
Figure 6 intrigued the influence of the thermophoresis parameter
and first order slip parameter
on
A progressive nanoparticles distribution was observed for
However, change in nanoparticle temperature was quite minimal due to the occurrence of smaller temperature difference. Physically, thermophoresis process was a migration of fluid particles from the hot configuration to the relatively cold region. Due to such fluctuation of nanoparticles, temperature profile enhanced. Another interesting observation examined for the variation of the slip constant reveals that the presence of the slip parameter also played a collective role in the enhancement of thermo-physical systems.
Figure 7 designed the envision of nanoparticle temperature
for leading values of curvature parameter
and Prandtl number
With increasing
distribution of
enlarged maximum values. The variation in
, due to existing values of
, controled the nanoparticles’ temperature as
attained inverse relation with thermal diffusivity. The variation in thermal diffusivity becomes slower as
gets maximum values. The graphical explorations are portrayed in
Figure 8 to depress the impact of Biot number
and Radiation parameter
on
A boosting nanoparticles temperature has been examined with involvement of
Physically, the enrolment of radiation parameter provided extra heat to the nanoparticles’ temperature due to which temperature increases. While observing the role of thermal Biot number
on
we note that an upshot of nanoparticles was exhibited due to large
The physical justification behind such a trend was justified as
, directly related to the coefficient of heat transfer which results in an increased temperature distribution. Moreover, more heat is transmuted from the hot surface to cold region particles which raise the temperature distribution.
Figure 9 illustrates the effect of thermophoresis
and second order slip parameter
on volume fraction concentration distribution
. We have examined that nanoparticles concentration
slightly enhanced with
While examining the variation of
on
, it was noted that the concentration distribution had again fluctuated with leading values of
effectively. However, the increasing trend in
was relatively slower for
as compared to the
. The combined effect of activation energy
and Prandtl number
on concentration distribution
is discussed in
Figure 10. The activation energy was the minimum energy amount to start the reaction process. Therefore, while increasing activation energy, the reaction process increased, which enhanced the concentration distribution
Such results could play useful role in processes where the reaction process needs to be improved. On the other hand, the Prandtl number controlled the concentration distribution. With increase of
the nanoparticles concentration declined.
Figure 11 illustrates the behavior of Hartmann’s number
and mix convection parameter
on concentration field
It was noted that concentration distribution is increased with increase of
Due to magnetization of nanoparticles, the concentration distribution was altered with specified range. Physically, the Hartmann number is associated with large Lorentz force which reduced the velocity of nanoparticles but enhanced the nanoparticle concentration. However, the effects of mixed convection constant
were quite opposite i.e., concentration profile decay for leading values of
Figure 12 exposed the impact of Brownian motion constant
and Lewis number
on
It is noteworthy that both the parameters decreased the function of concentration field. The Brownian motion constant involves the random movement of fluid particles in the whole system which is truncated as
get maximum values. Further
appeared in
form the formulated dimensionless concentration equation due to which
declined. It is remarked that negative values to concentration distribution do not mean that concentration is negative but magnitude of concentration is positive. Similar trend of concentration distribution has been found in Atif et al. [
45].
The variation in
X for various values of Hartmann number
M mixed convection parameter Γ Peclet number
Pe and bioconvection Lewis number
Lb has been inspected in
Figure 13 and
Figure 14.
Figure 13 deals with the variation of Hartmann number
M and mixed convection parameter Γ on motile density profile
χ The motile organism profile sufficiently improved with
M however, a decrement in
χ has been noted for Γ To determine the effects of Peclet number
Pe and bioconvection Lewis number
Lb on motile microorganism distribution
χ,
Figure 14 is sketched. The maximum values of
Pe results decrement of microorganisms diffusivity and so
X declined. Moreover, it can be also observed that increasing values of bioconvection Lewis number
Lb also causes lower motile microorganism distribution
X.
Table 2 presents the numerical variation in
for different values assigned to the various parameters like
,
and
Here it was observed that
attained maximum values for
and
From
Table 3, the local Nusselt number
has been varied for various involved parameters. An increasing variation in
has been notified with
and
A restively lower variation in the local Nusselt number was observed for
and
In
Table 4, the trend of local Sherwood number
was specified, which showed that local Sherwood number increase for
and
Finally results for motile density number
were executed in
Table 5, which shows motile density number get larger values for
and