Skip Content
You are currently on the new version of our website. Access the old version .
ProcessesProcesses
  • Correction
  • Open Access

25 January 2020

Correction: Vachaparambil, K.J. Comparison of Surface Tension Models for the Volume of Fluid Method. Processes 2019, 7, 542

and
Department of Materials Science and Engineering, Norwegian University of Science and Technology (NTNU), 7491 Trondheim, Norway
*
Authors to whom correspondence should be addressed.
This article belongs to the Special Issue CFD Modeling of Complex Chemical Processes: Multiscale and Multiphysics Challenges
Corrections:
In Equations (2) and (3), τ μ and τ ρ should be defined as μ a v g Δ x / σ and ρ a v g ( Δ x ) 3 / σ , respectively.
In Equation (9),   n f is the unit normal vector to the interface and S f is the face surface area.
In Table 8 and Table 10, the kinematic viscosity of gas or phase 2 should be equal to 1.48 × 10 5 m2/s, as provided in the simulation case files available in the Supplementary Material.
The results reported in [1] are not affected by these typographical errors.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Vachaparambil, K.J.; Einarsrud, K.E. Comparison of Surface Tension Models for the Volume of Fluid Method. Processes 2019, 7, 542. [Google Scholar] [CrossRef]

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.