Next Article in Journal
Cooling Rate Modeling and Evaluation during Centrifugal Atomization Process
Next Article in Special Issue
Helical Electrodes for Electro-Discharge Drilling: Experimental and CFD-Based Analysis of the Influence of Internal and External Flushing Geometries on the Process Characteristics
Previous Article in Journal
Influence of the Chemical Composition on the Solidification Path, Strengthening Mechanisms and Hardness of Ni-Cr-Si-Fe-B Self-Fluxing Alloys Obtained by Laser-Directed Energy Deposition
Previous Article in Special Issue
Experimental Investigation on the Cutting of Additively Manufactured Ti6Al4V with Wire-EDM and the Analytical Modelling of Cutting Speed and Surface Roughness
 
 
Article

Article Versions Notes

J. Manuf. Mater. Process. 2023, 7(3), 111; https://doi.org/10.3390/jmmp7030111
Action Date Notes Link
article xml file uploaded 7 June 2023 13:06 CEST Original file -
article xml uploaded. 7 June 2023 13:06 CEST Update https://www.mdpi.com/2504-4494/7/3/111/xml
article pdf uploaded. 7 June 2023 13:06 CEST Version of Record https://www.mdpi.com/2504-4494/7/3/111/pdf
article html file updated 7 June 2023 13:08 CEST Original file -
article html file updated 20 June 2023 21:08 CEST Update https://www.mdpi.com/2504-4494/7/3/111/html
Back to TopTop