Search Results (718)

Background/Objectives: Listeria monocytogenes is a high-risk pathogen in the food industry involved in several outbreaks. Bacteriocins are natural-origin antimicrobial peptides or proteins that represent a good alternative to synthetic antimicrobials capable of inhibiting the growth of pathogens. This study aimed to purify and identify bacteriocins from the cell-free supernatant of Enterococcus lactis-67, which exhibits antagonistic activity against L. monocytogenes. Methods: Protein purification was performed by precipitation with ammonium sulfate, dialysis, and fast protein liquid chromatography. Active protein fractions were analyzed by SDS-PAGE and identified by mass spectrometry. Results: In addition to enterocins A and B, a novel 47 kDa bacteriocin with LysM and NlpC/P60 domains, on the N- and C-terminal regions, respectively, was identified. This enterocin has not been described for Enterococcus before. Conclusions: This study contributes to the identification of new natural and effective strategies for ensuring food safety. Full article

The study investigated the effect of adding citrus fruits on the dynamics of reducing sugars during the fermentation of Criollo cocoa beans from Lagunas and Casual (Amazonas, Peru). Both spontaneous fermentations and fermentations supplemented with orange, passion fruit, or pineapple at concentrations of 5% and 10% were conducted over six days in wooden boxes, with samples collected every 24 h. Sucrose, glucose, and fructose contents were quantified using ultra-high-performance liquid chromatography coupled with a refractive index detector (UHPLC-RID), and the data were analyzed via ANOVA and PCA. In samples from Lagunas, initial sucrose levels (69.22 mg/g) decreased sharply during the first two days, whereas in the fermented mass from Casual, the sucrose concentrations were low from the outset (6.3 mg/g). The addition of citrus fruits promoted higher accumulation of glucose and fructose in the intermediate and final stages, reaching maximum concentrations of 76.24 mg/g and 81.06 mg/g, respectively, on day six in Lagunas with 10% fruit supplementation. Multivariate analysis indicated that fruit-treated fermentations exhibited a more active and distinct fermentation profile compared to spontaneous fermentations. These results demonstrate that the controlled addition of citrus fruits represents an innovative, low-cost biotechnological strategy for optimizing cocoa fermentation and may enhance the development of flavor and aroma precursors. Full article

This study aimed to develop a novel biomaterial for neural tissue regeneration by combining chitosan (CS), a natural polymer, with graphene oxide (GO) at concentrations of 3%, 6%, and 9%. The homogeneity, conductivity, three-dimensional characteristics, and ability to support cell viability of the composite materials were systematically evaluated. Fourier-Transform Infrared (FTIR) spectroscopy confirmed the successful incorporation of GO into the CS matrix, while UV-Vis and photoluminescence (PL) spectrometry revealed modifications in the optical properties with increasing GO content. Thermogravimetric analysis (TG-DSC) demonstrated improved thermal stability of the composites, and swelling tests indicated enhanced water absorption capacity. Although some agglomerates were observed, the homogeneity was reasonable at both macroscopic and microscopic level (optical visualization–FTIR and electron microscopy). The composite films exhibited promising physical and electrochemical properties, highlighting their potential for neural tissue engineering applications. Their biological activity was assessed by culturing neuronal cells on the CS-GO scaffolds. Results from MTT, LDH, and LIVE/DEAD assays demonstrated excellent cell viability, moderate-to-good cell attachment, and the promotion of intercellular network formation. Among the tested formulations, the CS-GO 6% scaffold showed the most favorable biological response, with a significant increase in SH-SY5Y cell viability after 7 days (p < 0.05) compared to the CS control. LIVE/DEAD imaging confirmed enhanced cell attachment and elongated morphology, while the LDH assay indicated minimal cytotoxicity. Notably, a critical threshold was identified between 6% and 9% GO, where conductivity increased by approximately 52-fold. Future studies should focus on optimizing the composite parameters, loading them with specific biologically active agents and thus targeting specific neuronal applications. Full article

Waveguide-integrated metasurfaces offer a promising platform for ultracompact on-chip optical systems, enabling applications such as fluorescence sensing, holography, and near-eye displays. In particular, integrated achromatic metalenses that couple guided modes to free-space radiation are highly desirable for single-molecule fluorescence sensing, where high numerical aperture (NA), efficient light focusing, and consistent focal volume overlap across excitation and emission wavelengths are critical. However, designing integrated high-NA metalenses with multi-wavelength operation remains fundamentally challenging due to the wavelength-dependent propagation of guided modes. Here, we present an inverse design framework that simultaneously optimizes the geometries and positions of silicon nitride nanofins atop a slab waveguide to achieve diffraction-limited focusing at three wavelengths with unity NA. The resulting metalens outperforms conventional segmented designs in focusing efficiency and sidelobe suppression, particularly at wavelengths corresponding to the excitation and emission bands of the model fluorophore Alexa Fluor 647. Numerical analysis shows that the design yields a high molecule detection efficiency suitable for epi-fluorescence single-molecule sensing. This work highlights the potential of inverse-designed metalenses as a versatile on-chip platform for advanced applications in fluorescence spectroscopy, augmented reality, or optical trapping. Full article

Background: Oxidative stress (OS) and inflammation are interconnected processes with significant roles in various chronic diseases, particularly those associated with aging, such as metabolic syndrome (MetS). Recent evidence suggests that walnuts (from Juglans regia L.), due to their rich content of phytochemicals, have antiaging potential by attenuating OS and chronic low-grade inflammation, known as inflammaging. Objectives: We aimed to assess the impact of daily walnut consumption for 4 weeks on biomarkers of OS and inflammation in a cohort of middle-aged individuals at risk of developing MetS. Methods: In this crossover randomized controlled trial (RCT), 22 participants (mean age: 48.81 ± 4.3 years) underwent two 28-day dietary interventions separated by a one-month washout period. One intervention period included daily consumption of 45 g of walnuts, while the other (control period) involved a normal-calorie diet without walnuts. Catalase (CAT) and glutathione peroxidase (GPx) activities, total antioxidant capacity (TAC), and interleukin (IL-1β, IL-6, IL-8) and tumor necrosis factor alpha (TNF-α) levels were determined from serum before and after each intervention period. Results: Assessment of changes obtained for the selected biomarkers following the walnut and control-diet periods (final-baseline) showed slight changes, but without any statistical significance, among the 20 participants included in the analysis. Conclusions: This first RCT targeting a group of middle-aged adults at risk of developing MetS shows that short-term (4 weeks) daily walnut consumption did not significantly alter oxidative stress and inflammation parameters, thus potentially contributing to the maintenance of cellular homeostasis. Further research is needed to investigate the impact of daily walnut consumption over a longer period (>3 months) on oxidative and inflammatory status in the middle-aged population and its potential to positively impact MetS biomarkers. Full article

The retinal pigment epithelium (RPE) is strongly involved in the pathogenesis of several retinal diseases, such as age-related macular degeneration (AMD). RPE models addressing specific pathological pathways are of high importance for understanding cellular pathomechanisms and pre-clinical screening of potential new therapeutics. The goal of this study is to establish standard operation protocols for single-eye porcine RPE preparation for AMD-relevant models of oxidative stress (RPE-Ox) and inflammation (RPE-Inf). Porcine primary RPE were prepared from one eye and seeded into one well of 12-well plates or, for polar differentiation, in transwell inserts. Different coatings (Poly-ᴅ-Lysine and laminin) and serum content of media (10%, 5%, and 1%) were tested to determine optimal culture parameters. For RPE-Ox, cells were treated with NaIO₃, CoCl₂, or erastin; cell viability (thiazolyl blue tetrazolium bromide, MTT), and gene expression (RT-qPCR) were determined. For RPE-Inf, cells were treated with lipopolysaccharide (LPS), polyinosinic/polycytidylic acid (Poly I:C), or tumor necrosis factor alpha (TNF-α); cell viability (MTT), cytokine secretion (ELISA), and gene expression (RT-qPCR) were determined. For transwell plates in RPE-Inf, cell viability (MTT), polar cytokine secretion (ELISA), gene expression (RT-qPCR), and transepithelial electrical resistance (TEER) for barrier assessment were conducted. For RPE-Ox, effective LD₅₀ could be achieved by using 24 h stimulation with 25 µm erastin, seven days after preparation in 5% serum cultures, without coating. For gene expression assessment, the use of Poly-ᴅ-Lysine is recommended. For RPE-Inf, three days of LPS stimulation (1 µg/mL) showed effective cytokine activation with 5% serum on uncoated 12-well plates. Transwell plates are not recommended for cytokine secretion assessment. It can be used for cell barrier assays in which LPS also showed effective cell barrier decrease and gene expression assays. Two specific best practice protocols for the use of porcine single-eye cultures in AMD research concerning oxidative stress and inflammation with optimized parameters were established and are provided. Full article

This study focused on the thermal stability and ablative behavior assessment of five newly developed composite TPS configurations. All ten test samples were 3D printed via FDM using various fire-retardant thermoplastic materials, with and without reinforcement. Eight samples integrated a new thermal management internal air chamber conceptualized architecture. A prompt feasible approach for the flame resistance preliminary assessment of ablative TPS samples was developed, using an in-house oxy-acetylene torch test bench. Experimental OTB ablation tests involved exposing the front surface samples to direct flame at 1450 ± 50 °C at 100 mm distance. For each configuration, two samples were tested: one subjected to 30 s of flame exposure and the other to 60 s. During testing, internal temperatures were measured at two backside sample contact points. Recorded temperatures remained below 46 °C, significantly under the maximum allowable back face temperature of 180 °C set for TPSs. The highest mass losses were measured for PC and PETG FR materials, achieving around 19% (30 s) and, respectively, 36% (60 s), while the reinforced configurations showed overall only a third of this reduction. The study’s major outcomes were the internal air chamber concept validation and identifying two reinforced configurations as strong candidates for the further development of 3D-printed ablative TPSs. Full article

Background: Optic neuritis (ON) is a common manifestation of multiple sclerosis (MS), serving as a clinical window into central nervous system demyelination. Optical coherence tomography (OCT) and visual evoked potentials (VEPs) are complementary non-invasive tools for assessing structural and functional damage to the visual pathway. The objective of this paper is to evaluate correlations between OCT and VEP parameters in MS patients with and without a history of ON and assess their relationship with disease duration and disability (EDSS). Methods: This cross-sectional study included 54 eyes from 27 relapsing–remitting MS patients. OCT was used to measure circumpapillary and the temporal peripapillary retinal nerve fiber layer (pRNFL) and the foveal/parafoveal ganglion cell-inner plexiform layer (GCIPL) thickness. VEPs assessed P100 latency and amplitude. Patients were grouped by ON history. Results: Eyes without ON showed a significantly greater circumpapillary pRNFL thickness (mean difference: 18.27 ± 5.33 µm, p = 0.001), temporal pRNFL thickness (15.71 ± 5.49 µm, p = 0.006), and parafoveal GCIPL thickness (12.85 ± 5.3 µm, p = 0.019) compared to ON eyes. p100 latency was shorter and the amplitude was higher in NON eyes, but without statistical significance. Strong negative correlations were found between OCT thickness and EDSS and disease duration. p100 latency correlated negatively with OCT parameters, while amplitude showed a positive correlation with pRNFL thickness in ON eyes. Conclusions: OCT parameters, particularly pRNFL and GCIPL thickness, correlate with functional and clinical markers of MS. Combined OCT–VEP evaluation enhances the assessment of neurodegeneration and disease progression. Full article

Multiple sclerosis (MS) is a chronic, immune-mediated neurological disorder with increasing global prevalence. Emerging evidence underscores the role of lifestyle interventions (particularly diet and physical activity) in modulating disease progression and improving quality of life. This narrative review synthesizes current scientific literature on the effects of dietary interventions, including the Mediterranean, ketogenic, Swank, Wahls, gluten-free, and fasting-based diets, alongside various physical activity regimens. The Mediterranean and ketogenic diets show promise in reducing inflammation, enhancing neuroprotection, and improving metabolic health. Similarly, structured physical activity (including aerobic, resistance, sensorimotor, and mind–body exercises) demonstrates benefits in mobility, fatigue, and mental well-being. The review highlights the need for personalized, sustainable approaches that integrate nutritional and exercise-based strategies for optimal MS management in the long term. Full article

Cyclodextrins, since their discovery in the late 19th century, have gained tremendous interest in biomedical research, beginning with their recognition as safe pharmaceutical excipients, and continuing with exploiting their potential for enhancing the therapeutic response of active pharmaceutical ingredients, and also to be used as drugs for specific medical purposes. This review presents an integrative perspective on amphiphilic cyclodextrins, the manuscript being divided into two parts, one devoted to the properties of amphiphilic cyclodextrins, while the second one is dedicated to their biomedical applications, with an emphasis on cancer therapy. Full article

This paper aims to study the potential of whey, a by-product in the dairy industry, to be used as a sustainable and health-promoting ingredient in baking. In this regard, whey powder (WhF) was produced and incorporated into three composite flours consisting of wheat flour and whey powder in proportions of 5% (WhWF5), 10% (WhWF10), and 15% (WhWF15). These composite flours were then used to produce bread. The nutritional properties (proximate composition, macro and microelement content) and bioactive compounds (total polyphenols and antioxidant activity) were assessed for both the composite flours and the resulting breads. In addition, the rheological behavior of the dough was evaluated using the Mixolab system, while the microstructural characteristics and physical properties of the composite flours were analyzed using Small/Wide Angle X-ray Scattering (SAXS/WAXS) and Fourier Transform Infrared Spectroscopy (FTIR). Sensory evaluation of the breads was also performed. The results demonstrated a positive effect of the whey powder addition on the nutritional profile of both composite flours and bakery products, particularly through increased protein levels (25.24–37.77% in fortified flours vs. 11.26% in control; 16.64–18.89% in fortified breads vs. 14.12% in control) and enhanced mineral content (11.27–80.45% higher compared to white wheat bread), alongside a reduction in carbohydrate content. Bread fortified with 15% whey powder showed higher monolement with increases of 27.80% for K, 7.01% for Mg, and 28.67% for Ca compared to control bread without whey. The analysis of the Mixolab charts confirmed the progressive influence of whey powder on dough rheology. While water absorption remains high, other functional parameters, such as gluten quality, kneading capacity, and starch viscosity, were negatively affected. Nonetheless, the nutritional advantages and reduced retrogradation tendency may offset these drawbacks in the context of developing functional bakery products. Formulations containing 5–10% whey powder appear to offer an optimal balance between technological performance, nutritional quality, and sensory acceptance. Full article

Numerous studies on specific cannabis compounds (cannabinoids and phenolic acids) have demonstrated their therapeutic potential, with their administration methods remaining a key research focus. Transdermal drug delivery (TDD) systems are gaining attention due to their advantages, such as painless administration, controlled release, direct absorption into the bloodstream, and its ability to bypass hepatic metabolism. The thin films obtained via pulsed laser deposition consist of micro- and nanoparticles capable of migrating through skin pores upon contact. This study investigates the interaction of phenolic compounds in hemp seeds with pulsed laser beams. The main goal is to achieve the ablation and deposition of these compounds as thin films suitable for TDD applications. The other key objective is optimizing laser energy to enhance the industrial feasibility of this method. Thin layers were deposited on glass and hemp fabric using dual pulsed laser (DPL) ablation on a compressed hemp seed target held in a stainless steel ring. The target was irradiated for 30 min with two synchronized pulsed laser beams, each with parameters of 30 mJ, 532 nm, pulse width of 10 ns, and a repetition rate of 10 Hz. Each beam had an angle of incidence with the target surface of 45°, and the angle between the two beams was also 45°. To improve laser absorption, two approaches were used: (1) HS-DPL/glass and HS-DPL/hemp fabric, in which a portion of the stainless steel ring was included in the irradiated area, and (2) HST-DPL/glass and HST-DPL/hemp fabric—hemp seeds were mixed with turmeric powder, which is known to improve laser interaction and biocompatibility. The FTIR and Micro-FTIR spectroscopy (ATR) performed on thin films compared to the target material confirmed the presence of hemp-derived phenolic compounds, including tetrahydrocannabinol (THC), cannabidiol (CBD), ferulic acid, and coumaric acid, along with other functional groups such as amides. The ATR spectra have been validated against Gaussian 6 numerical simulations. Scanning electron microscopy (SEM) and substance transfer tests revealed the microgranular structure of thin films. Through the analyzes carried out, the following were highlighted: spherical structures (0.3–2 μm) for HS-DPL/glass, HS-DPL/hemp fabric, HST-DPL/glass, and HST-DPL/hemp fabric; larger spherical structures (8–13 μm) for HS-DPL/glass and HST-DPL/glass; angular, amorphous-like structures (~3.5 μm) for HS-DPL/glass; and crystalline-like structures (0.6–1.3 μm) for HST-DPL/glass. Microparticle transfer from thin films on the hemp fabric to the filter paper at a human body temperature (37 °C) confirmed their suitability for TDD applications, aligning with the “whole plant medicine” or “entourage effect” concept. Granular, composite, thin films were successfully developed, capable of releasing microparticles upon contact with a surface whose temperature is 37 °C, specific to the human body. Each of the microparticles in the thin films obtained with the DPL technique contains phenolic compounds (cannabinoids and phenolic acids) comparable to those in hemp seeds, effectively acting as “microseeds.” The obtained films are viable for TDD applications, while the DPL technique ensures industrial scalability due to its low laser energy requirements. Full article

Background: Artocarpus heterophyllus, familiar as jackfruit, is a tropical fruit highly valued not only for its nutritional content but also for its medicinal properties, including potential antidiabetic effects. Objectives: This study aimed to evaluate the insulinotropic, β-cell proliferative and anti-hyperlipidaemic properties of the ethanol extract of unripe Artocarpus heterophyllus (EEAH) in high-fat-fed (HFF) diet-induced obese mice. Method: We evaluated acute insulin secretion and β-cell proliferation in BRIN-BD11 cells, and assessed in vitro glucose diffusion and starch digestion. In vivo, acute and chronic studies in HFF induced obese mice measured glucose tolerance, body weight, food and fluid intake, and lipid profiles. A preliminary phytochemical screening was also performed. Results: In this study, EEAH exhibited significant antidiabetic activity through multiple mechanisms. EEAH enhanced glucose-stimulated insulin secretion in BRIN-BD11 β-cells via K_ATP channel modulation and cAMP-mediated pathways, with partial dependence on extracellular calcium, and it also promoted β-cell proliferation. In vitro assays revealed its ability to inhibit starch digestion and glucose diffusion, indicating delayed carbohydrate digestion and absorption. In high-fat-fed (HFF) obese mice, the acute and chronic oral administration of EEAH improved oral glucose tolerance, reduced fasting blood glucose, decreased body weight, and normalized food and fluid intake. Lipid profile analysis showed increased HDL and reduced total cholesterol, LDL, and triglycerides, while higher doses of EEAH also enhanced gut motility. Phytochemical screening revealed the presence of bioactive compounds such as alkaloids, tannins, flavonoids, saponins, steroids, and terpenoids, which are likely responsible for these therapeutic effects. Conclusion: These findings highlight EEAH as a promising natural candidate for adjunctive therapy in managing type 2 diabetes and associated metabolic disorders and emphasize the importance of future multi-omics studies to elucidate its molecular targets and pathways. Full article

Background and Clinical Significance: As a common inflammatory skin disorder, acne vulgaris is classically associated with sebum overproduction, follicular hyper keratinization, and Cutibacterium acnes proliferation. Emerging evidence suggests a link between severe or treatment-resistant acne and metabolic syndrome, characterized by central obesity, insulin resistance, dyslipidemia, and hypertension. This case series aims to explore the clinical overlap between acne and metabolic dysfunction and highlight the relevance of multidisciplinary evaluation. Case Presentation: Three patients with severe acne vulgaris and coexisting metabolic abnormalities were evaluated at a dermatology clinic in Oradea, Romania, between 2023 and 2024. Each patient underwent dermatologic examination, laboratory testing for metabolic and hormonal parameters, and individualized treatment. Management strategies included topical/systemic acne therapies combined with metabolic interventions (lifestyle modifications, metformin (in two cases), and lipid-lowering agents). Case 1 (female, 23) had obesity, insulin resistance, dyslipidemia, and polycystic ovary syndrome (PCOS). Case 2 (male, 19) presented with central obesity and atherogenic dyslipidemia. Case 3 (male, 18) showed insulin resistance, overweight status, and elevated inflammatory markers. All three showed suboptimal response to standard acne treatment. Adjunct metabolic management resulted in partial improvement within 3 months. One patient required isotretinoin after metabolic stabilization. Conclusions: These cases underscore the interplay between acne and metabolic dysfunction. Insulin resistance and systemic inflammation may contribute to therapeutic resistance in acne. Early recognition of metabolic syndrome features in patients with severe acne may improve treatment outcomes. Dermatologists should consider metabolic screening to guide comprehensive, multidisciplinary care. Full article

As we previously demonstrated that tranexamic acid (TXA), an antifibrinolytic, showed an antibacterial effect alone and in combination with vancomycin and gentamicin, we now wanted to analyze its own efficacy using new, different fluorescent staining reagents that target different components of the biofilm matrix and compare which one quantifies biofilm reduction better. A 10⁸ cfu/mL suspension of the Staphylococcus aureus (ATCC29213) strain was placed into the wells of a 24-multiwell plate covered with glass slides coated with 10% poly-L-lysine under agitation for 24 h at 37 °C. After 3 washes with PBS, wells were treated with either TXA 10 mg/mL or sterile water and incubated for 24 h at 37 °C. After three washes with PBS, the density area of the following biofilm components was calculated using confocal laser scanning microscopy: extracellular proteins (Sypro Ruby), α-extracellular polysaccharides (ConA-Alexa fluor 633), α or β-extracellular polysaccharides (GS-II-Alexa fluor 488), bacterial DNA (PI), and eDNA (TOTO^®-1). We observed a statistically significant reduction in the occupied area by all components of the S. aureus biofilm (p < 0.001) after TXA 10 mg/mL treatment, compared to the positive control. All biofilm components’ reduction percentages reached ≥90.0%. We demonstrated that TXA reduced both bacteria and extracellular matrix components of S. aureus biofilm by using five different stain reagents, with all being equally valid for quantification. Full article