In this paper, we explore the optimal combination of femtosecond laser drilling parameters for micro-hole processing on DD6 single-crystal high-temperature alloy and analyze the significance of parameter variations on the microstructure characteristi...
Thermal barrier coatings (TBCs) are widely used to protect high-temperature components against harsh environments, such as extremely high temperatures. In this work, a second generation Ni-based single crystal superalloy (DD6) was treated in two ways...
This study focuses on the diffusion bonding of a CoCrNi-based medium-entropy alloy (MEA) to a DD5 single-crystal superalloy. The microstructure and mechanical properties of the joint diffusion-bonded at variable bonding temperatures were investigated...
The microstructure of low-angle boundaries (LABs) of thethird-generation single-crystal superalloy DD9 and its effect on the tensile properties at 1100 °C were investigated. Double seed crystals techniques were used to obtain the specimens of DD9...
Single crystal superalloys are the preferred materials for manufacturing turbine blades of advanced aero-engines, due to their excellent high temperature comprehensive performance. The interfacial reaction between alloys and ceramic mould are an impo...
This study investigates the influence of solidification conditions on the high-cycle fatigue (HCF) behavior of a second-generation DD6 single-crystal superalloy. Single-crystal bars with a [001] orientation were prepared using the high-rate solidific...
Two models with a wax module tree structure were employed for directional solidification simulation. An experimental alloy of a second-generation nickel-based single-crystal superalloy, DD5, was set for this investigation. The temperature gradient va...
The fourth-generation single-crystal superalloy DD15 with 6% Co, 9% Co and 12% Co was cast using the vacuum directionally solidified furnace, while other alloying element’s content remained unchanged. The long-term aging experiment was conducte...
Using the seeding method, nickel-based single-crystal superalloy DD6 specimens with different growth orientations were prepared in a liquid metal cooling (LMC) directional solidification furnace. Subsequent standard heat treatment was carried out, an...
The thickness debit effect of creep behavior has been a focal point of nickel-based single-crystal superalloy research, and there is a need for an advanced creep deformation measurement method. This study developed a novel high-temperature creep test...
Taking nickel-based single crystal superalloy DD6 as the research object, different degrees of creep damage were prefabricated by creep interruption tests, and then the creep damage was repaired by the restoration heat treatment system of solid solut...
For China’s second-generation aero-engine blade DD6 single-crystal high-temperature alloy, the standard solution-treated test rods were subjected to long-term aging experiments (1290 °C, 1 h + 1300 °C, 2 h + 1315 °C, 4 h air cooling...
The geometric accuracy and surface quality of thin-film cooling holes have a significant impact on the cooling efficiency and fatigue life of aeroengine turbine blades. In this paper, we conducted experimental research on the processing of nickel-bas...
This study establishes a robust small-angle neutron scattering (SANS) methodology for the quantitative characterization of γ matrix channel widths in the nickel-based single-crystal superalloy DD10. By combining SANS with TEM analyses and model...
The failure mechanism of a thermal barrier coatings (TBCs) system is investigated using cyclic thermo-mechanical loading with a thermal gradient. Hollow circular cylindrical specimens are employed, consisting of a nickel-based single-crystal alloy DD...