Search Results (72)

Polymer-based aerogels have recently received considerable research attention as a favorable option for oil–water separation due to their enhanced porous 3D structure with great specific surface area, low density and outstanding sorption behavior. Additionally, polymer-containing aerogels exhibit more favorable characteristic properties, such as being lipophilic–hydrophobic (superhydrophobic–superoleophilic), hydrophilic–lipophobic (superhydrophilic–underwater oleophobic), or other specific wetness forms, including anisotropic and dual-wettability. In this review, cellulose and cellulose-based materials used as an aerogel for oil–water separation are comprehensively reviewed. This review highlights the significance of cellulose and cellulose-based combinations through structure–property interactions, surface modifications (using different hydrophilic and hydrophobic agents), and aerogel formation, focusing on the light density and high surface area of aerogels for effective oil–water separation. This article provides an in-depth review of four primary classifications of cellulose-based aerogels, namely, cellulose aerogels (regenerated cellulose and bacterial cellulose), cellulose with biopolymer-based aerogels (chitosan, lignin, and alginate), cellulose with synthetic polymer aerogels (polyvinyl alcohol, polyetherimide, polydopamine and others), and cellulose with organic/inorganic (such as SiO₂, MTMS, and tannic acid) material-based aerogels. Furthermore, the aspects of performance, scalability, and durability have been explained, alongside potential prospect directions for the advancement of cellulose aerogels aimed at their widespread application. This review article stands apart from previously published review works and represents the comprehensive review on cellulose-based aerogels for oil–water separation, featuring wide-ranging classifications. Full article

This study investigated how Ti6Al4V substrate topography affects the performance of diamond-like carbon (DLC) coatings. Substrates with four finishes (unpolished, #100, #400, #800 grit) were coated, and their morphology, wettability, bonding structure, mechanical properties, and biological response were examined. Characterization was performed using AFM, SEM, contact angle tests, Raman spectroscopy, and nanoindentation. Biocompatibility was evaluated with A549 epithelial cells. DLC deposition reduced roughness while partly preserving surface features. Increasing Ra was associated with lower surface free energy and ID/IG ratios. It also correlated with higher hardness and modulus, reflecting greater sp³ bonding. Biological results, however, indicated that surface organization was more decisive than Ra magnitude. The #100-grit surface, with aligned anisotropic grooves, supported uniform wetting, protein adsorption, and sustained proliferation. In contrast, the unpolished and smoother surfaces did not maintain long-term growth. These findings suggest that anisotropy, rather than Ra alone, plays a key role in optimizing DLC-coated Ti6Al4V implants. Full article

Janus nanoparticles (JNPs) extend the concept of amphiphilicity beyond classical molecular surfactants into the nanoscale. Amphiphilic behavior is defined by the presence of hydrophobic and hydrophilic moieties within a single molecular structure. Traditionally, such molecular structures are known as surfactants or amphiphiles and are capable of reducing interfacial tension, adsorbing spontaneously at interfaces, stabilizing emulsions and foams, and forming micelles, bilayers, or vesicles. Recent experimental, theoretical, and computational studies demonstrate that these behaviors are scalable to nanostructured colloids such as JNPs. Amphiphilic JNPs, defined by anisotropic surface chemistry on distinct hemispheres, display interfacial activity driven by directional wetting, variable interfacial immersion depth, and strong interfacial anchoring. They can stabilize liquid/liquid and liquid/gas interfaces, and enable templated or spontaneous self-assembly into supra-structures, such as monolayer sheets, vesicles, capsules, etc., both in bulk and at interfaces. Their behavior mimics the “soft” molecular amphiphiles but also includes additional particularities given by their “hard” structure, as well as contributions from capillary, van der Waals, hydrophobic, and shape-dependent forces. This review focuses on compiling the evidence supporting amphiphilicity as a scalable property, discussing how JNPs function as colloidal amphiphiles and how geometry, polarity contrast, interfacial interactions, and environmental parameters influence their behavior. By comparing surfactant behavior and JNP assembly, this work aims to clarify the transferable principles, the knowledge gap, as well as the emergent properties associated with amphiphilic Janus colloids. Full article

In this work, the mechanical properties of jute fiber-reinforced polymers were investigated, considering two manufacturing technologies—wet layups and vacuum-assisted resin infusion—with the aim of developing cost-effective composite materials based on natural fibers. In the manufacturing process, two different types of resins were used, specific to each technology. Specimens measuring 25 mm × 200 mm were cut from the resulting laminates at three orientations (0°, 45° and 90° with respect with the weft orientation), and they were subjected to tensile tests. The results showed that resin infusion yielded superior stiffness and strength values when compared to the wet layup. Multi-scale modeling techniques were applied in order to estimate the properties of the fibers and evaluate the orthotropic properties of the composites, and virtual material models that included orthotropic elasticity and the anisotropic Hill plasticity formulation were developed and evaluated, managing to reproduce the experimental data using finite element analyses with decent accuracy. Full article

Typical wet-chemical methods for the preparation of silica nanowires use polyvinylpyrrolidone and n-pentanol. This study presents a polyethylene glycol-based emulsion template method for the synthesis of SiO₂ nanowires (SiO₂NWs) in isopropanol. By systematically optimizing key parameters (type of solvent, polyethylene glycol molecular weight and dosage, dosage of sodium citrate, ammonium and tetraethyl orthosilicate, incubation temperature and time), SiO₂NWs with diameters about 530 nm were obtained. Replacing polyvinylpyrrolidone with polyethylene glycol enabled anisotropic growth in isopropanol, overcoming the dependency on traditional solvents like n-pentanol. Scale-up experiments (10× volume) demonstrated robust reproducibility, yielding nanowires with consistent morphology (~580 nm diameter). After calcination at 500 °C for 1 h, the morphology of the nanowires did not change significantly. Full article

Biological surfaces with physical discontinuity or chemical heterogeneity possess special wettability in the form of anisotropic wetting behavior. However, there are several challenges in designing and manufacturing samples with anisotropic wettability. This study investigates the fabrication of PTFE/PDMS grid membranes using Direct Ink Writing (DIW) 3D printing for oil–water separation applications. The ink’s rheological properties were optimized, revealing that a 60% PTFE/PDMS composite exhibited the ideal shear-thinning behavior for 3D printing. Our research investigated the interplay between various printing parameters like the extrusion air pressure, layer thickness, feed rate, and printing speed, which were found to influence the filament dimensions, pore sizes, and hydrophobic properties of the grid membrane. Two distinct grid structures were analyzed for their wettability and anisotropic hydrophobic characteristics. The grid membranes achieved up to 100% oil–water separation efficiency in specific configurations. Separation efficiency was shown to be dependent on factors like intrusion pressure, grid architecture, and the number of layers. This study underscores the potential of DIW 3D printing in creating specialized surfaces with controlled wettability, particularly superhydrophobicity and anisotropy, paving the way for advanced environmental applications such as efficient oil–water separation. Full article

Many tissues exhibit structural anisotropy, which imparts orientation-specific properties and functions. However, recapitulating the cellular patterns found in anisotropic tissues presents a remarkable challenge, particularly when using soft and wet hydrogels. Herein, we develop self-assembled anisotropic magnetic Fe₃O₄ micropatterns on polyethylene glycol hydrogels utilizing dipole–dipole interactions. Under the influence of a static magnetic field, Fe₃O₄ nanoparticles align into highly ordered structures with a height of 400–600 nm and a width of 8–10 μm. Furthermore, our layer-by-layer assembly technique enables the creation of oriented micropatterns with varying densities and heights, which can be further manipulated to form three-dimensional structures by adjusting the angle of the magnetic field. These anisotropic magnetic Fe₃O₄ micropatterns can be applied to various substrates, including treated glass slides, standard glass slides, silicon wafers, and polydimethylsiloxane. The patterned Fe₃O₄ scaffolds, modified with gold coating, effectively enhance cellular adhesion, orientation, and osteogenic differentiation of bone marrow-derived stem cells, which is crucial for effective tissue repair. Overall, this study presents an efficient strategy for constructing anisotropic Fe₃O₄ micropattern hydrogels, providing a bioactive platform that significantly enhances cellular functions. Full article

Surface wettability, the interaction between a liquid droplet and the surface it contacts, plays a key role in influencing droplet behavior and flow dynamics. There is a growing interest in designing surfaces with tailored wetting properties across diverse applications. Advanced fabrication techniques that create surfaces with unique wettability offer significant innovation potential. This study investigates the wettability transition of laser-textured anisotropic surfaces featuring shark skin-inspired microstructures using four post-processing methods: spray coating, isopropyl alcohol (IPA) treatment, silicone oil treatment, and silanization. The impact of each method on surface wettability was assessed through water contact angle measurements, scanning electron microscopy (SEM), and laser scanning microscopy. The results show a transition from superhydrophilic behavior on untreated laser-textured surfaces to various (super)hydrophobic states following surface treatment. Chemical treatments produced different levels of hydrophobicity and anisotropy, with silanization achieving the highest hydrophobicity and long-term stability, persisting for one year post-treatment. This enhancement is attributed to the low surface energy and chemical properties of silane compounds, which reduce surface tension and increase water repellence. In conclusion, this study demonstrates that post-processing techniques can effectively tailor surface wettability, enabling a wide range of wetting properties with significant implications for practical applications. Full article

The movement of liquid droplets on the energy gradient surface has attracted extensive attention inspired by biological features in nature, such as the periodic spindle-shaped nodes in spider silks and conical-like barbs of cacti, and the structure–property–function relationship of multifunctional gradient surfaces. In this study, a series of specific patterns are fabricated with 3D printing technology, followed by modification via the atmospheric pressure plasma treatment and liquid phase chemical deposition, resulting in enhancing the ability of water droplets of 5 μL to travel 18.47 mm on a horizontal plane and 22.75 mm against gravity at up to a 20° tilting angle. Additionally, analysis techniques have been employed, including a contact angle analyzer, ESCA, and a laser confocal microscope to evaluate the sample performance. This work could further be applied to many applications related to microfluidic devices, drug delivery and water/fog collection. Full article

In a recent breakthrough in the field of two-dimensional (2D) nanomaterials, the first synthesis of a single-atom-thick gold lattice of goldene has been reported through an innovative wet chemical removal of Ti₃C₂ from the layered Ti₃AuC₂. Inspired by this advancement, in this communication and for the first time, a comprehensive first-principles investigation using a combination of density functional theory (DFT) and machine learning interatomic potential (MLIP) calculations has been conducted to delve into the stability, electronic, mechanical and thermal properties of the single-layer and free-standing goldene. The presented results confirm thermal stability at 700 K as well as remarkable dynamical stability of the stress-free and strained goldene monolayer. At the ground state, the elastic modulus and tensile strength of the goldene monolayer are predicted to be over 226 and 12 GPa, respectively. Through validated MLIP-based molecular dynamics calculations, it is found that at room temperature, the goldene nanosheet can exhibit anisotropic tensile strength over 9 GPa and a low lattice thermal conductivity around 10 ± 2 W/(m.K), respectively. We finally show that the native metallic nature of the goldene monolayer stays intact under large tensile strains. The combined insights from DFT and MLIP-based results provide a comprehensive understanding of the stability, mechanical, thermal and electronic properties of goldene nanosheets. Full article

We studied the effects of vertical vibrations on a water drop that was pinned to the sharp edges of a rectangular post. By varying the frequency and amplitude of the vertical displacement, distinct resonance peaks were observed using a simple optical technique. The vibrational spectra of the first two modes exhibited two closely spaced peaks, which corresponded to standing waves that exist along the major and minor contour lengths of the drops. The values of the resonance frequencies can be explained rather well by a simple model, which was originally proposed for axially symmetric drops. Full article

Piezoelectric micromachined ultrasound transducers (PMUTs) have gained significant popularity in the field of ultrasound ranging and medical imaging owing to their small size, low power consumption, and affordability. The scar-free “MIS” (micro-hole inter-etch and sealing) process, a novel bulk-silicon manufacturing technique, has been successfully developed for the fabrication of pressure sensors, flow sensors, and accelerometers. In this study, we utilize the MIS process to fabricate cavity diaphragm structures for PMUTs, resulting in the formation of a flat cavity diaphragm structure through anisotropic etching of (111) wafers in a 70 °C tetramethylammonium hydroxide (TMAH) solution. This study investigates the corrosion characteristics of the MIS technology on (111) silicon wafers, arranges micro-pores etched on bulk silicon around the desired cavity structure in a regular pattern, and takes into consideration the distance compensation for lateral corrosion, resulting in a fully connected cavity structure closely approximating an ortho-hexagonal shape. By utilizing a sputtering process to deposit metallic molybdenum as upper and lower electrodes, as well as piezoelectric materials above the cavity structure, we have successfully fabricated aluminum nitride (AlN) piezoelectric ultrasonic transducer arrays of various sizes and structures. The final hexagonal PMUT cells of various sizes that were fabricated achieved a maximum quality factor (Q) of 251 and a displacement sensitivity of 18.49 nm/V across a range of resonant frequencies from 6.28 MHz to 11.99 MHz. This fabrication design facilitates the achievement of IC-compatible and cost-effective mass production of PMUT array devices with high resonance frequencies. Full article

Fractals are widely recognized as one of the best geometric models to depict soil roughness on various scales from tillage to micro-topography smaller than radar wavelength. However, most fractal approaches require an additional geometric description of experimental sites to be analysed by existing radiative transfer models. For example, fractal dimension or spectral parameter is often related to root-mean-square (RMS) height to be characterized as the microwave surface. However, field measurements hardly represent multi-scale roughness. In this study, we rescaled Power Spectral Density with Synthetic Aperture Radar (SAR)-inverted rms height, and estimated non-stationary fractal roughness to accommodate multi-scale roughness into a radiative transfer model structure. As a result, soil moisture was retrieved over the Yanco site in Australia. Local validation shows that the Integral Equation Model (IEM) poorly simulated backscatters using inverted roughness as compared to fractal roughness even in anisotropic conditions. This is considered due to a violation of time-invariance assumption used for inversion. Spatial analysis also shows that multi-scale fractal roughness better illustrated the hydrologically reasonable backscattering partitioning, as compared to inverted roughness. Fractal roughness showed a greater contribution of roughness to backscattering in dry conditions. Differences between IEM backscattering and measurement were lower, even when the isotropic assumption of the fractal model was violated. In wet conditions, the contribution of soil moisture to backscattering was shown more clearly by fractal roughness. These results suggest that the multi-scale fractal roughness can be better adapted to the IEM even in anisotropic conditions than the inversion to assume time-invariance of roughness. Full article

The Controlled-Source ElectroMagnetic (CSEM) method provides crucial information about reservoir fluids and their spatial distribution. Carbon dioxide (CO₂) storage, enhanced oil recovery (EOR), geothermal exploration, and lithium exploration are ideal applications for the CSEM method. The versatility of CSEM permits its customization to specific reservoir objectives by selecting the appropriate components of a multi-component system. To effectively tailor the CSEM approach, it is essential to determine whether the primary target reservoir is resistive or conductive. This task is relatively straightforward in CO₂ monitoring, where the injected fluid is resistive. However, for scenarios involving brine-saturated (water-wet) or oil-wet (carbon capture, utilization, and storage—CCUS) reservoirs, consideration must also be given to conductive reservoir components. The optimization of data acquisition before the survey involves analyzing target parameters and the sensitivity of multi-component CSEM. This optimization process typically includes on-site noise measurements and 3D anisotropic modeling. Based on our experience, subsequent surveys tend to proceed smoothly, yielding robust measurements that align with scientific objectives. Other critical aspects to be considered are using magnetotelluric (MT) measurements to define the overall background resistivities and integrating real-time quality assurance during data acquisition with 3D modeling. This integration allows the fine tuning of acquisition parameters such as acquisition time and necessary repeats. As a result, data can be examined in real-time to assess subsurface information content while the acquisition is ongoing. Consequently, high-quality data sets are usually obtained for subsequent processing and initial interpretation with minimal user intervention. The implementation of sensitivity analysis during the inversion process plays a pivotal role in ensuring that the acquired data accurately respond to the target reservoirs’ expected depth range. To elucidate these concepts, we present an illustrative example from a CO₂ storage site in North Dakota, USA, wherein the long-offset transient electromagnetic method (LOTEM), a variation of the CSEM method, and the MT method were utilized. This example showcases how surface measurements attain appropriately upscaled log-scale sensitivity. Furthermore, the sensitivity of the CSEM and MT methods was examined in other case histories, where the target reservoirs exhibited conductive properties, such as those encountered in enhanced oil recovery (EOR), geothermal, and lithium exploration applications. The same equipment specifications were utilized for CSEM and MT surveys across all case studies. Full article

Symmetry-deficient two-dimensional (2D) layered materials induce a highly anisotropic optical response due to the anisotropy in their crystal structure, facilitating their application in polarized nanodevices. Intercalation is a new way to tune the optoelectronic properties of materials by inserting guest atoms into layered host materials, and 2D layered structures stacked with van der Waals gaps are a prerequisite for this phase of the technique. In this paper, 2D tellurium nanosheets were synthesized with a hydrothermal method, and copper atoms were inserted with a wet chemical method. The widening of the crystal plane spacing proves the introduction of copper atoms, and polarization−related second-harmonic-generation (SHG) studies reveal the intrinsic anisotropic modes of the two samples, and birefringent properties are found with polarizing light microscopy. We further investigated the electrical properties of the samples, and the embedding of the copper atoms caused the samples to exhibit higher currents, but their devices lost the gate control effect. Full article