Search Results (79)

Fatty amines are nitrogen-containing organic compounds synthesized from fatty acids, olefins, or alcohols, typically derived from natural oils or petrochemical sources. These molecules generally feature long hydrophobic alkyl chains ranging from C8 to C22 and can be positively charged on the nitrogen atom, which confer pronounced cationic surface activity. This property makes them highly effective as emulsifiers, conditioning agents, antistatic agents, and surfactants, particularly in industrial formulations and personal care products such as shampoos, conditioners, and creams. Historically, the production of fatty amines has relied heavily on petrochemical feedstocks, contributing significantly to greenhouse gas emissions, particularly CO₂. In response to growing environmental concerns, there is an increasing shift toward renewable and sustainable raw materials, aligning with the principles of the circular economy. The cosmetics and detergent industries are at the forefront of this transition, actively integrating bio-based ingredients to minimize ecological impact. This review provides a comprehensive overview of the sources, synthetic pathways, and applications of fatty amines. It highlights their functional roles in detergents and cosmetic formulations and explores scientific and technological strategies aimed at enhancing sustainability across the fatty amine supply chain. Full article

Quaternary ammonium compounds (QACs) are a class of chemicals used for their antimicrobial, surfactant, and antistatic properties. QACs are present in many consumer products, and people are regularly exposed to them. We have previously shown reproductive toxicity in mice exposed to the disinfectants alkyl dimethyl benzyl ammonium chloride (ADBAC) and dodecyl dimethyl ammonium chloride (DDAC). To assess the long-term reproductive impacts, a generational reproductive study was conducted. Sperm parameters were determined by CASA and epigenetic enzyme mRNA expression was determined by pathway-focused RT-PCR. Mice ambiently exposed to ADBAC+DDAC exhibited decreases in reproductive indices that persisted through the F1 generation. Male mice (F0) dosed with 120 mg/kg/day of ADBAC+DDAC exhibited decreased sperm concentration and motility that persisted through the F1 generation. Changes in the mRNA expression of chromatin-modifying enzymes in the testes were seen. Two histone acetyltransferases (Hat1 and Kat2b) were upregulated, and one lysine-specific demethylase (Kdm6b) was downregulated in the F0 generation. The DNA methyltransferase Dnmt1 was downregulated in F1 males. These changes in chromatin-modifying enzymes are known to decrease fertility and could be a mechanism for ADBAC+DDAC reproductive toxicity. In all experiments, the F2 generation was similar to the controls, showing multi-generational but not trans-generational epigenetic inheritance. Full article

Pelvic organ prolapse (POP) is a health condition that can significantly impact patients’ quality of life. Unfortunately, most available treatments present drawbacks such as high recurrence rates, risk of complications, poor tissue integration, and the need for reintervention. One promising alternative is the use of biodegradable implantable meshes, which can support the organs, guide tissue regeneration, and be fully absorbed without damaging the surrounding tissues. In this study, biodegradable polycaprolactone (PCL) meshes were fabricated using melt electrowritten (MEW), incorporating the antistatic agent Hostastat^® FA 38 (HT) to address these limitations. The goal was to produce microscaffolds with suitable biophysical properties, particularly more stable fiber deposition and reduced fiber diameter. Different HT concentrations (0.03, 0.06, and 0.1 wt%) were investigated to assess their influence on the fiber diameter and mechanical properties of the PCL meshes. Increasing HT concentration significantly reduced fiber diameter by 14–17%, 39–45%, and 65–66%, depending on mesh geometry (square or sinusoidal). At 0.06 wt%, PCL/HT meshes showed a 24.10% increase in tensile strength and a 55.59% increase in Young’s Modulus compared to pure PCL meshes of similar diameter. All formulations demonstrated cell viability >90%. Differential scanning calorimetry (DSC) revealed preserved thermal stability and changes in crystallinity with HT addition. These findings indicate that the antistatic agent yields promising results, enabling the production of thinner, more stable fibers with higher tensile strength and Young’s Modulus than PCL meshes, without adding cellular toxicity. Developing a thinner and more stable mesh that mimics vaginal tissue mechanics could offer an innovative solution for POP repair. Full article

Antistatic and anti-flame biodegradable polymer composites were developed by melt-blending polybutylene succinate (PBS) with epoxy resin, polybutylene adipate-co-terephthalate (PBAT), and MgO particles. The composite films were prepared using a two-roll mill and an extrusion-blown film machine. Plasma and sparking techniques were used to improve the antistatic properties of the composites. The PBS/E1/PBAT/MgO 15% composite exhibited an improvement in V-1 rating of flame retardancy, indicating an enhancement in the flame retardancy of biodegradable composite films. The tensile strength of the PBS/PBAT blend increased from 19 MPa to 25 MPa with the addition of 1% epoxy due to the epoxy reaction increasing compatibility between PBS and PBAT. The PBS/E1/PBAT and PBS/E1/PBAT blends with MgO 0, 0.5, and 1% showed increases in the contact angle to 80.9°, 83.0°, and 85.7°, respectively, because the epoxy improved the reaction between PBS and PBAT via the MgO catalyst effect. Fourier-transform infrared spectroscopy confirmed the reaction between the epoxy groups of the epoxy resin and the carboxyl end groups of PBS and PBAT by new peaks at 1246 and 1249 cm⁻¹. Plasma technology (sputtering) presents better antistatic properties than the sparking process because of the high consistency of the metal nanoparticles on the surface. This composite can be applied for electronic devices as sustainable packaging. Full article

To develop antistatic materials suitable for semiconductor wafer transportation trays, in situ polymerized polystyrene (PS) and polyester (PETE) materials incorporating multi-walled carbon nanotubes (MWNTs) were synthesized. Their thermal and electrical properties were evaluated under conditions relevant to semiconductor tray manufacturing. Both the PS and PETE materials exhibited improved thermal stability with an increasing MWNT content. Differential scanning calorimetry (DSC) revealed that the glass transition temperature (T_g) of the PS increased from 82 °C (0 wt%) to 86 °C (1.0 wt%) and 91 °C (2.0 wt%), while that of the PETE increased from 83 °C to 84 °C and 90 °C, respectively. Surface resistivity measurements also demonstrated enhanced electrical conductivity. For the PS, resistivity decreased from >10¹³ Ohm/sq to 8.8 × 10³ and 3.7 × 10³ Ohm/sq at 1.0 wt% and 2.0 wt% MWNT, respectively. The PETE materials followed a similar trend, with values dropping from >10¹³ Ohm/sq to 5.9 × 10³ and 0.2 × 10³ Ohm/sq. These results confirm that MWNT incorporation effectively enhances both thermal and electrical performance, demonstrating the potential of MWNT/PS and MWNT/PETE as antistatic materials for semiconductor applications. Full article

Conventional hair-straightening methods that use chemical treatments to break disulfide bonds cause severe damage to the hair shaft, leading to weakened hair that is prone to reverting to its curly form in high humidity. Therefore, a unique haircare coating technology is required to protect hair integrity and provide a long-lasting straightening effect. Herein, we designed a hair-straightening technology by integrating a nature-inspired polyphenol–inorganic sulfate (PIS) redox agent into formulated shampoo, which achieves a desirable straightening effect through sulfate-induced disulfide breakage while preserving hair integrity through a polyphenol-reinforced structure. The interaction between polyphenols and residual thiols from the straightening process maintained a long-lasting straight hair structure and hair strength. Ellman’s assay showed a lower free thiol content from reductant-induced damaged keratin in PIS shampoo-treated hair than in sulfate-treated hair as the polyphenol–thiol bond was formed through the Michael addition reaction, thereby restoring the natural structure of the hair and enhancing its mechanical properties. Owing to the polyphenol coating, PIS shampoo-treated hair exhibited an antistatic effect and high hydrophobicity, indicating healthy hair. Furthermore, the polyphenol coating effectively scavenged radical oxygen species (ROS) in the hair, thereby improving damage protection. Thus, PIS shampoo offers an alternative approach for effective hair straightening. Full article

This paper deals with one of the methods for protecting against an electrostatic charge by using a conductive coating. We focus on methyl-silicone resin with the addition of a conductive polymer. The individual electrical parameters of these coatings are studied because these parameters determine the ability of charge leakage. The purpose of this study was to find out if the coating would change its electrical parameters after some time and if the antistatic protection purpose of the coating would deteriorate. We used the dielectric spectroscopy method for the measurements. This method was chosen because conductive polymers are basically semiconductors, and the insulation parameters were measured by this method. After aging, another set of measurements was made, and the results were compared. We found that the electrical parameters of the antistatic coating were considerably changed by the aging process. The reliability of antistatic paints was proven in these experiments. The paints presented had high values of conductivity in general, and after our experiments, the most reliable conductive paintings appeared to be the ones with the PANI polymer. For reliable electrostatic charge elimination on non-conductive surfaces, the BISIL paint proved to be the best choice. Our experiments also proved the influence of the underlying surface material on the electrical parameters of the paintings. Furthermore, we proved that the aging process influenced the loss factor of the paintings. Full article

The paper presents a review of CNTs synthesis methods and their application as a functional filler to obtain polymer composites for various technical purposes for strain gauges, electrical heating, anti-static coatings, electrically conductive compounds, etc. Various synthesis methods allow CNTs with different morphology and structural properties to be created, which expands the possibilities of the application of such nanoscale structures. Polymers can provide such effects as ‘shape memory’ and self-repair of mechanical defects. Different combinations of polymers and dispersed fillers influence the change in electrical and thermal conductivity, as well as the positive temperature coefficient of resistance, which makes it possible to achieve the effect of temperature self-regulation during electrical heating. CNTs make it possible to form PTCR (positive temperature coefficient of resistance) in elastomers at lower concentrations, which makes it possible to preserve mechanical strength and use more efficient modes of heat generation. For strain gauges, CNTs improve sensitivity to mechanical effects and extend the measurement range. The use of thermoplastic elastomers provides the temperature of PTCR operation for electric heating at the level of 200 °C (voltage 240 V), which allows such heaters to operate at a power supply from a household electrical network. CNTs-based strain gauges can provide structural condition monitoring of composite materials. Full article

This study focuses on formulating a low-surface-energy, water-resistant, and anti-condensation coating utilizing a fluorocarbon and acrylic resins composite (FAC), enhanced by six functional additives: antistatic agents, water-repellent agents, nanofillers, anti-mold and anti-algae agent, leveling agents, and wetting and dispersing agents. An orthogonal experimental design was implemented to systematically investigate the effects of varying concentrations of these additives on the surface tension of the coating. The results show that the optimized combination of fluorocarbon and acrylic resins composite (OFAC)with functional additives significantly reduces the surface tension, thereby improving both water resistance and anti-condensation properties. This research advances the development of more efficient surface treatment technologies, particularly for applications requiring enhanced water resistance and anti-condensation performance. Full article

Thermochromic textiles possess the capability to indicate ambient temperature through color changes, enabling real-time temperature monitoring and providing temperature warnings for body heat management. In this study, three thermochromic dyes—blue, red, and yellow—were synthesized using crystalline violet lactone (CVL), 6′-(diethylamino)-1′,3′-dimethyl-fluoran (DDF), and 3′,6′-dimethoxyfluoran (DOF) as leuco dyes, respectively, with biomass tea polyphenol serving as the color developer and tetradecanol as the phase change material. The chemical structures of these dyes were characterized using UV spectroscopy, infrared spectroscopy, Raman spectroscopy and ¹H NMR. The thermochromic mechanisms were investigated, revealing that the binding bonds between the leuco dyes and the color developer broke and reorganized with temperature changes, imparting reversible thermochromic property. Polyester fabrics were dyed using an impregnation method to produce three reversible thermochromic fabrics in blue, red, and yellow. The structure and properties of these fabrics were analyzed, showing a significant increase in the UPF value from 26.3 to approximately 100, indicating enhanced UV resistance. Water contact angle measurements revealed that the contact angle of undyed polyester fabrics was 139°, while that of dyed polyester fabrics decreased by about 40°, indicating improved hydrophilicity. Additionally, the fabric inductive static tester showed that the static voltage half-life of dyed polyester fabric was less than 1 s, demonstrating a significant antistatic effect. Infrared thermal imaging results indicated that during the warming and cooling process, the thermochromic polyester fabric exhibited specific energy storage and insulation effects at 38 °C, close to the human body temperature. This study presented a novel approach to developing smart color-changing textiles using biomass-derived thermochromic dyes, offering diverse materials for personal thermal management, and intelligent insulation applications. Full article

In this study, multiwalled carbon nanotubes (MWCNTs) were incorporated into vulcanized natural rubber (VNR) matrixes to create nanocomposites with improved mechanical, thermal, and electrical properties. The interfacial interaction of the MWCNTs with the VNR matrix was quantitatively evaluated based on the crosslink density value calculated using the Flory–Rehner methodology. Various rheometric parameters were influenced by the addition of the MWCNTs, including minimum torque (M_L), maximum torque (M_H), and scorch time (t_S1). The MWCNTs significantly enhanced the vulcanization of the composites based on the VNR matrix. This study highlights the impact of MWCNTs on crosslink density, improving mechanical properties and reducing swelling in the VNR matrix. We discovered that the MWCNTs and the VNR matrix interact strongly, which improved the mechanical properties of the matrix. The MWCNTs improved the hardness, tensile strength, and abrasion resistance of the VNR/MWCNT nanocomposites. Based on dynamic mechanical analysis, MWCNT incorporation improved stiffness as indicated by a change in storage modulus and glass transition temperatures. The addition of MWCNTs to the VNR/MWCNT nanocomposites significantly improved their electrical properties, reaching a percolation threshold where conductive pathways were formed, enhancing their overall conductivity. Overall, this study demonstrates the versatility and functionality of VNR/MWCNT nanocomposites for a variety of applications, including sensors, electromagnetic shielding, and antistatic blankets. Full article

Polyester fibers tend to generate static electricity during the weaving and application processes, posing a threat to their production. Enhancing the water absorbency and electrical conductivity of polyester fibers themselves is an effective approach to improving their antistatic properties. In this study, multifunctional chitosan (CS), sodium phytate (SP), and Cu²⁺ were loaded on polyester fibers through layer-by-layer (LBL) self-assembly. The antistatic and water absorption capability of the modified polyester fibers was investigated by designing different process parameters combined with a surface resistance test and water contact angle tests. The antistatic property test results confirmed the positive effect of CS and Cu²⁺ on discharging electrostatic charge. Within a definite scope, with the increase in the number of assembly layers, assembly duration, and the concentration of the assembly substances, the wettability of the modified polyester fibers became more favorable and the antistatic effect became more remarkable. Full article

Styrene–butadiene rubber (SBR) waste from the shoe industry was repurposed to produce polypropylene (PP)-based compounds, with the aim of evaluating their antistatic potential. Styrene–ethylene–propylene (SEP) was added as a compatibilizing agent, while carbon nanotubes (MWCNT) were incorporated as a conductive nanofiller. The polymer compounds were processed in an internal mixer, and injection molded. The properties evaluated included torque rheometry, melt flow index (MFI), impact strength, tensile strength, Shore D hardness, electrical conductivity, heat deflection temperature (HDT), and differential scanning calorimetry (DSC), along with scanning electron microscopy (SEM) for morphology analysis. The production of the PP/SBR/SEP (60/30/10 wt%) compound resulted in a ductile material, enhancing impact strength and elongation at break to 161.2% and 165.2%, respectively, compared to pure PP. The addition of SEP improved the compatibility of the PP/SBR system, leading to an increase in the torque curve and a reduction in the MFI. Furthermore, the SBR/SEP combination in PP accelerated the crystallization process and increased the degree of crystallinity, suggesting a nucleating effect. Carbon nanotubes, in concentrations ranging from 0.5 to 2 phr (parts per hundred resin), were added to the PP/SBR/SEP system. Only the PP/SBR/SEP/MWCNT compound with 2 phr of MWCNT was suitable for antistatic applications, exhibiting an electrical conductivity of 4.52 × 10⁻⁰⁷ S/cm. This was due to the greater distribution of MWCNT in the PP matrix, as demonstrated by SEM. In addition, remains tough at room temperature, with a 166% increase in impact strength compared to PP. However, there was a reduction in elastic modulus, tensile strength, Shore D hardness, and HDT due to increased flexibility. SBR waste can be reintegrated into the production chain to produce antistatic polymeric compounds, obtaining a tough material at room temperature. Full article

As the information age progresses, the electronics industry is evolving towards smaller and more sophisticated products. However, electrostatic potentials easily penetrate these components, causing damage. This underscores the urgent need for materials with superior antistatic properties to safeguard electronic devices from such damage. Antistatic coatings typically rely on polymers as the primary material, enhanced with conductive fillers and additives to improve performance. Despite significant progress, these coatings still face challenges related to advanced processing technologies and the integration of electrical and mechanical properties. Among various conductive fillers, the conducting polymer PEDOT:PSS stands out for its exceptional conductivity, environmental stability, and long cycle life. Additionally, epoxy resin (EP) is widely utilized in polymer coatings due to its strong adhesion to diverse substrates during curing. Here, we develop highly conductive and strongly adhesive PEDOT:PSS inks by combining PEDOT:PSS with EP using a composite engineering approach. These inks are used to fabricate PEDOT:PSS coatings by direct ink writing (DIW). We systematically evaluate the DIW of PEDOT:PSS-EP coatings, which show high electrical conductivity (ranging from 0.59 ± 0.07 to 41.50 ± 3.26 S cm⁻¹), strong adhesion (ranging from 15.84 ± 2.18 to 99.3 ± 9.06 kPa), and robust mechanical strength (8 MPa). Additionally, we examine the surface morphology, wettability, and hardness of the coatings with varying PEDOT:PSS content. The resultant coatings demonstrate significant potential for applications in antistatic protection, electromagnetic shielding, and other flexible electronic technologies. Full article

This work describes the synthesis of a polysilane (PSH)–barium titanate (BT) ferroelectric polymer composite that keeps stable in the presence of ultraviolet light (UV). To evaluate the stability in the presence of UV radiation and the mechanism of interaction between the PSH matrix and BT, FTIR measurements were carried out. The UV/VIS absorption measurement reveals that PSH absorbs strongly in the ultraviolet range, while the composite behaves similarly to BT. Although PSH is a semiconductor, the dielectric spectrometry analysis determined that BT is a ferroelectric material due to its high dielectric constant and low dielectric losses. In contrast to the polymer matrix, the composite polymer has a greater dielectric constant and a lower loss permittivity. PSH is a semiconductor, as indicated by its electrical conductivity of 10⁻⁵ S/cm; nevertheless, the UV-irradiated polymer has antistatic properties (10⁻⁸ S/cm). Irradiated or not, the polymer composite is a semiconductor, with conductivity of 10⁻⁶ S/cm, significantly lower than that of PSH. The interaction with electromagnetic radiation indicates electromagnetic shielding behavior for both BT (highest absorption magnitude of −57 dB) and the polymer composite (maximum absorption magnitudes range from 8.4 to −15.2 dB). Based on these research results, the novel composite with specific characteristics may be used in electronic applications in UV-irradiated conditions. Full article