Search Results (45)

CRISPR-Cas proteins from bacteria are powerful tools for gene editing and molecular diagnostics. Expanding capacity of CRISPR to low cost, multiplexed assays of biomarkers is a key to future disease diagnostics, since multiple biomarker detection is essential for reliable diagnostics. Herein we describe a multiplexed assay in a 3D-printed 96-well plate with CRISPR-Cas13a immobilized in each well to target three circulating blood biomarker microRNAs (miRNAs 34c-5p, 200c-3p, and 30e-5p) for Alzheimer’s disease (ALZ). Immobilized Cas13a is equipped with different crRNAs complementary to each miRNA target. MiRNA binding to crRNA complements activates the collateral RNase activity of Cas13a, cleaving a quenched fluorescent reporter (RNaseAlert) with fluorophore and quencher connected by an RNA oligonucleotide to enable fluorescence measurements. We achieved ultralow limits of detection (LOD) of 0.74 fg/mL for miRNA 34c-5p, 0.70 fg/mL for miRNA 30e-5p, and 7.4 fg/mL for miRNA 200c-3p, with dynamic ranges from LODs up to about 1800 pg/mL. The accuracy of the assay was validated by spike-recovery studies and good correlation of levels of patient plasma samples vs. a referee method. This new approach provides selective, sensitive multiplex miRNA biosensing, and simultaneously accommodates analysis of standards and controls. Full article

Smart fibers with tunable luminescence properties, as a new form of visual output, present the potential to revolutionize personal living habits in the future and are receiving more and more attention. However, a huge challenge of smart fibers as wearable materials is their stretching capability for seamless integration with the human body. Herein, stretchable thermochromic fluorescent fibers are prepared based on self-crystallinity phase change, using elastic polyurethane (PU) as the fiber matrix, to meet the dynamic requirements of the human body. The switching fluorescence-emitting characteristic of the fibers is derived from the reversible conversion of the dispersion/aggregation state of the fluorophore coumarin 6 (C6) and the quencher methylene blue (MB) in the phase-change material hexadecanoic acid (HcA) during heating/cooling processes. Considering the important role of phase-change materials, thermochromic fluorescent dye is encapsuled in the solid state via the piercing–solidifying method to avoid the dissolution of HcA by the organic solvent of the PU spinning solution and maintain excellent thermochromic behavior in the fibers. The fibers obtained by wet spinning exhibit good fluorescent emission contrast and reversibility, as well as high elasticity of 800% elongation. This work presents a strategy for constructing stretchable smart luminescence fibers for human–machine interaction and communications. Full article

DNA chemical reaction networks can perform complex information processing through careful design of reaction kinetics, which involves the reaction network structure, rate constants, and initial concentrations. The toehold-mediated strand displacement reaction (TMSDR) is a key mechanism in creating DNA circuits, offering a rational design approach by integrating individually designed TMSDRs. Tools such as VisualDSD and NUPACK facilitate the efficient design of these systems by allowing precise tuning of reaction parameters. However, discrepancies between simulated and experimental results can occur, often due to the modification of reporter molecules. Recently, fluorophore dyes and quenchers were found to significantly impact the dynamics of irreversible TMSDRs, altering them by nearly two orders of magnitude. The impact on reaction dynamics varies with the modification site of these reporters. This study examines the mechanisms of reporter modifications affecting reversible TMSDRs, influencing transient and steady-state characteristics. This is crucial for DNA circuit design, which integrates reversible and irreversible TMSDRs. Our findings indicate that modifying fluorescent dye and quencher an appropriate distance apart (e.g., toehold length) can minimize adverse effects on the DNA reaction dynamics while ensuring effective FRET, therefore improving the accuracy of experimental verification for DNA reaction systems. Full article

Background: When a body is discovered at a crime or murder scene, it is crucial to examine the body and estimate its postmortem interval (PMI). Accurate estimation of PMI is vital for identifying suspects and providing clues to resolve the case. MicroRNAs (miRNAs or miRs) are small non-coding RNAs that remain relatively stable in the cell nucleus even after death-related changes occur. Objective: This study developed a molecular beacon probe for mmu-miR-133a-5p and assessed its use in mouse muscle tissue at temperatures of 4 °C and 21 °C to estimate the PMI. Methods: A total of 36 healthy adult male BALB/c mice were divided into 9 PMI time points (0, 2, 6, 8, and 10 days) with 3 mice per time point, and they were exposed to 4 °C and 21 °C. Next, the expression pattern of mmu-miR-133a in the skeletal muscle tissue over a 10-day PMI period was analyzed using the developed molecular beacon probe. Results: The molecular beacon (MB) probe was designed for optimal thermodynamic stability with a hairpin structure that opened in the presence of mmu-miR-133a-5p, thus separating the fluorophore from the quencher and resulting in a strong fluorescence signal at 495 nm. Fluorescence intensity increased with mmu-miR-133a-5p concentration from 1 ng/μL to 1000 ng/μL and exhibited a strong correlation (R² = 0.9966) and a detection limit of 1 ng/μL. Subsequently, the expression level of mmu-miR-133a-5p was observed to be stable in mouse skeletal muscle tissue at both 4 °C and 21 °C. Conclusions: This user-friendly assay can complete measurements in just 30 min after RNA extraction and is suitable for point-of-care testing, and it possesses the potential to improve existing complex and time-consuming methods for PMI estimation. Full article

Digital PCR (dPCR) is a powerful method for highly sensitive and precise quantification of nucleic acids. However, designing and optimizing new multiplex dPCR assays using target sequence specific probes remains cumbersome, since fluorescent signals must be optimized for every new target panel. As a solution, we established a generic fluorogenic 6-plex reporter set, based on mediator probe technology, that decouples target detection from signal generation. This generic reporter set is compatible with different target panels and thus provides already optimized fluorescence signals from the start of new assay development. Generic reporters showed high population separability in a colorimetric 6-plex mediator probe dPCR, due to their tailored fluorophore and quencher selection. These reporters were further tested using different KRAS, NRAS and BRAF single-nucleotide polymorphisms (SNP), which are frequent point mutation targets in liquid biopsy. We specifically quantified SNP targets in our multiplex approach down to 0.4 copies per microliter (cp/µL) reaction mix, equaling 10 copies per reaction, on a wild-type background of 400 cp/µL for each, equaling 0.1% variant allele frequencies. We also demonstrated the design of an alternative generic reporter set from scratch in order to give detailed step-by-step guidance on how to systematically establish and optimize novel generic reporter sets. Those generic reporter sets can be customized for various digital PCR platforms or target panels with different degrees of multiplexing. Full article

The use of DNA structures in creating multimodal logic gates bears high potential for building molecular devices and computation systems. However, due to the complex designs or complicated working principles, the implementation of DNA logic gates within molecular devices and circuits is still quite limited. Here, we designed simple four-way DNA logic gates that can serve as multimodal platforms for simple to complex operations. Using the proximity quenching of the fluorophore–quencher pair in combination with the toehold-mediated strand displacement (TMSD) strategy, we have successfully demonstrated that the fluorescence output, which is a result of gate opening, solely relies on the oligonucleotide(s) input. We further demonstrated that this strategy can be used to create multimodal (tunable displacement initiation sites on the four-way platform) logic gates including YES, AND, OR, and the combinations thereof. The four-way DNA logic gates developed here bear high promise for building biological computers and next-generation smart molecular circuits with biosensing capabilities. Full article

Herein, we propose an analytical approach based on intermolecular fluorescent resonant energy transfer (FRET) pairs for the visualization of specific enzyme activity in model biomembranes and in living cells. Cell visualizations with fluorescent confocal laser microscopy usually rely on fluorescent probes, such as Fluorescein isothiocyanate (FITC), Alexa488, Tetramethylrhodamine isothiocyanate (TRITC) and many others. However, for more specific tasks, such as the detection of certain enzymatic activity inside the living cell, the toolbox is quite limited. In the case of enzyme-hydrolases for example, the choice is limited to organic molecules comprising a fluorescent dye (typically, 4-methylumbelliferone (MUmb) or 7-amino-4-methylcoumarin (AMC) derivatives) and a fluorescence quencher, bound via an enzyme-sensitive linker—so that when the linker is degraded, the fluorescent signal increases. Unfortunately, both MUmb and AMC are quenched and have a relatively low quantum yield in cells, and their excitation and emission ranges overlap with that of intracellular fluorophores, often producing a strong background noise. R6G, on the other hand, has excellent quantum yield apart from intracellular fluorophores, but there are no efficient quenchers that could be chemically linked to R6G. Herein, we show that R6G is able to form intermolecular FRET pairs with MUmb or AMC, with the latter serving as fluorescence donors. This yields a combination of R6G’s excellent fluorescence properties with a possibility to use an enzyme-sensitive linker in MUTMAC or AMC derivatives. This phenomenon was initially discovered in a model system, reversed micelles, where the donor, the acceptor, and the enzyme are forced to be in close proximity to each other, so that proximity could serve as an explanation for the intermolecular FRET effect. Surprisingly enough, the phenomenon has been reproduced in living cells. Moreover, we were able to create working intermolecular donor–acceptor FRET pairs for several different enzymes, including chymotrypsin, phosphatase, and asparaginase. This appears counterintuitive, as besides the overlap of the emission spectra of the donor and the absorption spectra of the acceptor, there are other criteria for the FRET effect, including the convergence of two fluorophores at a distance of about 1–10 nm, and the orientation of their dipoles at a certain angle, which is difficult to imagine in a bulk system like a living cell. We hypothesize that FRET-enabling donor–acceptor interaction may be taking place at the inner surface of the lipid bilayer, to which both donor and acceptor molecules would likely have an affinity. This hypothesis would require a more detailed investigation. Therefore, we have shown that the method suggested has good potential in the visualization of enzyme functioning inside living cells, which is often a challenging task. Shifting of the fluorescence signal to the long-wavelength region would increase the signal selectivity, making it easily distinguishable from autofluorescence. Full article

Nucleic acid quantification, allowing us to accurately know the copy number of target nucleic acids, is significant for diagnosis, food safety, agricultural production, and environmental protection. However, current digital quantification methods require expensive instruments or complicated microfluidic chips, making it difficult to popularize in the point-of-care detection. Paper is an inexpensive and readily available material. In this study, we propose a simple and cost-effective paper membrane-based digital loop-mediated isothermal amplification (LAMP) method for nucleic acid quantification. In the presence of DNA fluorescence dyes, the high background signals will cover up the amplicons-formed bright spots. To reduce the background fluorescence signals, a quencher-fluorophore duplex was introduced in LAMP primers to replace non-specific fluorescence dyes. After that, the amplicons-formed spots on the paper membrane can be observed; thus, the target DNA can be quantified by counting the spots. Take Vibrio parahaemolyticus DNA detection as an instance, a good linear relationship is obtained between the light spots and the copy numbers of DNA. The paper membrane-based digital LAMP detection can detect 100 copies target DNA per reaction within 30 min. Overall, the proposed nucleic acid quantification method has the advantages of a simple workflow, short sample-in and answer-out time, low cost, and high signal-to-noise, which is promising for application in resourced limited areas. Full article

In this paper, ZnS nanoparticles were bioconjugated with bovine serum albumin and prepared in a form of nanosuspension using a wet circulation grinding. The stable nanosuspension with monomodal particle size distribution (d₅₀ = 137 nm) and negative zeta potential (−18.3 mV) was obtained. The sorption kinetics and isotherm were determined. Interactions between ZnS and albumin were studied using the fluorescence techniques. The quenching mechanism, describing both static and dynamic interactions, was investigated. Various parameters were calculated, including the quenching rate constant, binding constant, stoichiometry of the binding process, and accessibility of fluorophore to the quencher. It has been found that tryptophan, in comparison to tyrosine, can be closer to the binding site established by analyzing the synchronous fluorescence spectra. The cellular mechanism in multiple myeloma cells treated with nanosuspension was evaluated by fluorescence assays for quantification of apoptosis, assessment of mitochondrial membrane potential and evaluation of cell cycle changes. The preliminary results confirm that the nontoxic nature of ZnS nanoparticles is potentially applicable in drug delivery systems. Additionally, slight changes in the secondary structure of albumin, accompanied by a decrease in α-helix content, were investigated using the FTIR method after analyzing the deconvoluted Amide I band spectra of ZnS nanoparticles conjugated with albumin. Thermogravimetric analysis and long-term stability studies were also performed to obtain a complete picture about the studied system. Full article

Proteins with extended polyglutamine regions are associated with several neurodegenerative disorders, including Huntington’s disease. Intracellular proteolytic processing of these proteins is not well understood. In particular, it is unclear whether long polyglutamine fragments resulting from the proteolysis of these proteins can be potentially cleaved by the proteasome. Here, we studied the susceptibility of the glutamine-glutamine bond to proteolysis by the proteasome using oligoglutamine-containing peptides with a fluorophore/quencher pair. We found that the addition of the 11S proteasomal regulator (also known as PA28) significantly accelerated the hydrolysis of oligoglutamine-containing peptides by the 20S proteasome. Unexpectedly, a similar effect was observed for the 26S proteasome in the presence of the 11S regulator. LC/MS data revealed that the hydrolysis of our peptides with both 20S and 26S proteasomes leads to N-terminal fragments containing two or three glutamine residues and that the hydrolysis site does not change after the addition of the 11S regulator. This was confirmed by the docking experiment, which shows that the preferred hydrolysis site is located after the second/third glutamine residue. Inhibitory analysis revealed that trypsin-like specificity is mainly responsible for the proteasomal hydrolysis of the glutamine-glutamine bond. Together, our results indicate that both 20S and 26S proteasomes are capable of degrading the N-terminal part of oligoglutamine fragments, while the 11S regulator significantly accelerates the hydrolysis without changing its specificity. This data suggests that proteasome activity may be enhanced in relation to polyglutamine substrates present in neurons in the early stages of polyglutamine disorders. Full article

Simultaneous and non-destructive quantitative detection of intracellular metal ions holds great promise for improving the accuracy of diagnosis and biological research. Herein, novel multicolor DNAzymes-embedded framework nucleic acids (FNAzymes) were presented, which can easily enter cells and achieve simultaneous and quantitative detection of intracellular physiologically related Cu²⁺ and Zn²⁺. Two types of DNAzymes, specific to Cu²⁺ and Zn²⁺, were encoded in the framework nucleic acids (FNAs) via self-assembly. With the formation of a well-ordered FNAzyme nanostructure, the fluorophore and the quencher were close to each other; therefore, the fluorescence was quenched. In the presence of Cu²⁺ and Zn²⁺, the integrated FNAzymes would be specifically cleaved, resulting in the release of fluorophores in cells. Consequently, the fluorescence in living cells could be observed by a confocal microscope and semi-quantitatively analyzed by flow cytometry with low-nanomolar sensitivity for both metal ions. The FNAzymes have high uniformity and structural accuracy, which are beneficial for intracellular detection with excellent reproducibility. This proposed method offers new opportunities for non-destructive, semi-quantitative, multi-target detection in living cells. Full article

The interaction of indomethacin with human serum albumin (HSA) has been studied here considering the primary and secondary binding sites. The Stern–Volmer plots were linear in the lower concentration range of indomethacin while a downward curvature was observed in the higher concentration range, suggesting the presence of more than one binding site for indomethacin inside HSA due to which the microenvironment of the fluorophore changed slightly and some of its fraction was not accessible to the quencher. The Stern–Volmer quenching constants (K_SV) for the primary and secondary sites were calculated from the two linear portions of the Stern–Volmer plots. There was around a two-fold decrease in the quenching constants for the low-affinity site as compared to the primary binding site. The interaction takes place via a static quenching mechanism and the K_SV decreases at both primary and secondary sites upon increasing the temperature. The binding constants were also evaluated, which show strong binding at the primary site and fair binding at the secondary site. The binding was thermodynamically favorable with the liberation of heat and the ordering of the system. In principle, hydrogen bonding and Van der Waals forces were involved in the binding at the primary site while the low-affinity site interacted through hydrophobic forces only. The competitive binding was also evaluated using warfarin, ibuprofen, hemin, and a warfarin + hemin combination as site markers. The binding profile remained unchanged in the presence of ibuprofen, whereas it decreased in the presence of both warfarin and hemin with a straight line in the Stern–Volmer plots. The reduction in the binding was at a maximum when both warfarin and hemin were present simultaneously with the downward curvature in the Stern–Volmer plots at higher concentrations of indomethacin. The secondary structure of HSA also changes slightly in the presence of higher concentrations of indomethacin. Molecular dynamics simulations were performed at the primary and secondary binding sites of HSA which are drug site 1 (located in the subdomain IIA of the protein) and the hemin binding site (located in subdomain IB), respectively. From the results obtained from molecular docking and MD simulation, the indomethacin molecule showed more binding affinity towards drug site 1 followed by the other two sites. Full article

A novel aptamer-based fluorescent-sensing platform with a triple-helix molecular switch (THMS) was proposed as a switch for detecting the arsenic(III) ion. The triple helix structure was prepared by binding a signal transduction probe and arsenic aptamer. Additionally, the signal transduction probe labeled with fluorophore (FAM) and quencher (BHQ1) was employed as a signal indicator. The proposed aptasensor is rapid, simple and sensitive, with a limit of detection of 69.95 nM. The decrease in peak fluorescence intensity shows a linear dependence, with the concentration of As(III) in the range of 0.1 µM to 2.5 µM. The whole detection process takes 30 min. Moreover, the THMS-based aptasensor was also successfully used to detect As(III) in a real sample of Huangpu River water with good recoveries. The aptamer-based THMS also presents distinct advantages in stability and selectivity. The proposed strategy developed herein can be extensively applied in the field of food inspection. Full article

Here we present simple fluorophores based on the pyridine core, obtained with straightforward synthetic methodologies. These compounds present in solution absorption maxima in the UV region and fluorescence emission of between 300 and 450 nm, depending on the solvent and chemical structure of the fluorophore. The nature of the solvent was shown to play a fundamental role in their excite-state deactivation, which allowed successful exploration of these compounds as optical sensors for benzene and fuel adulteration in gasoline. In ethanolic solution, upon the addition of benzene, in general the fluorophores presented fluorescence quenching, where a linear correlation between the emission intensity and the amount of benzene (quencher) was observed. In addition, the application of an optical sensor for the detection of fuel adulteration in commercial standard and premium gasoline was successfully presented and discussed. Theoretical calculations were also applied to better understand the solvent–fluorophore interactions. Full article

Loop-mediated isothermal amplification (LAMP) is the most popular technology for point-of-care testing applications due its rapid, sensitive and specific detection with simple instrumentation compared to PCR-based methods. Many systems for reading the results of LAMP amplifications exist, including real-time fluorescence detection using fluorophore-labelled probes attached to oligonucleotide sequences complementary to the target nucleic acid. This methodology allows the simultaneous detection of multiple targets (multiplexing) in one LAMP assay. A method for multiplexing LAMP is the amplification by release of quenching (DARQ) technique by using a 5′-quencher modified LAMP primer annealed to 3′-fluorophore-labelled acting as detection oligonucleotide. The main application of multiplex LAMP is the rapid and accurate diagnosis of infectious diseases, allowing differentiation of co-infecting pathogens in a single reaction. Schistosomiasis, caused among other species by Schistosoma mansoni and strongyloidiasis, caused by Strongyloides stercoralis, are the most common helminth-parasite infections worldwide with overlapping distribution areas and high possibility of coinfections in the human population. It would be of great interest to develop a duplex LAMP to detect both pathogens in the same reaction. In this study, we investigate the use of our two previously developed and well-stablished LAMP assays for S. mansoni and Strongyloides spp. DNA detection in a new duplex real-time eight-primer system based on a modified DARQ probe method that can be performed in a portable isothermal fluorimeter with minimal laboratory resources. We also applied a strategy to stabilize the duplexed DARQ-LAMP mixtures at room temperature for use as ready-to-use formats facilitating analysis in field settings as point-of-care diagnostics for schistosomiasis and strongyloidiasis. Full article