Search Results (1,165)

In the previous research that aimed to enhance the toughness and tribological properties of silicon nitride ceramics, a lignin precursor was added to the ceramic matrix, which achieved conversion through pyrolysis and sintering, resulting in a silicon nitride-based composite ceramic containing nitrogen-doped graphene quantum dots (N-GQDs). This composite material demonstrated excellent comprehensive mechanical properties and friction-wear performance. Based on the existing experimental results, the first-principles plane wave mode conservation pseudopotential method of density functional theory was adopted in this study to build a microscopic heterostructure model of Si₃N₄-based composite ceramics containing N-GQDs. Meanwhile, the surface energy of Si₃N₄ and the system energy of the N-GQDs@Si₃N₄ heterostructure were calculated. The calculation results showed that when the distance between N-GQDs and Si₃N₄ in the heterostructure was 2.3 Å, the structural energy was the smallest and the structure was the steadiest. This is consistent with the previous experimental results and further validates the coating mechanism of N-GQDs covering the Si₃N₄ column-shaped crystals. Simultaneously, based on the results of the previous experiments, the stress of the heterostructure composed of Si₃N₄ particles coated with different numbers of layers of nitrogen quantum dots was calculated to predict the optimal lignin doping amount. It was found that when the doping amount was between 1% and 2%, the best microstructure and mechanical properties were obtained. This paper provides a new method for studying the graphene quantum dot coating structure. Full article

High-performance electrical contact materials are crucial for electric power systems, new energy vehicles, and rail transportation, as their properties directly impact the reliability and safety of electronic devices. Enhancing these materials not only improves energy efficiency but also offers notable environmental and economic advantages. However, traditional composite contact materials often suffer from poor dispersion of the reinforcing phase, which restricts further performance improvement. Graphene (G), with its unique two-dimensional structure and exceptional electrical, mechanical, and tribological properties, is considered an ideal reinforcement for metal matrix composites. Yet, its tendency to agglomerate poses a significant challenge to achieving uniform dispersion. To overcome this, the study introduces a dual approach: modulation of the zeta potential (ζ) in the silver-plated liquid to enhance G’s dispersion stability, and concurrent optimization of the composite electrodeposition process. Experimental results demonstrate that this synergistic strategy enables the uniform distribution of G within the silver matrix. The resulting silver–graphene (Ag-G) composite coatings exhibit outstanding overall performance at both micro and macro levels. This work offers a novel and effective pathway for the design of advanced electrical contact materials with promising application potential. Full article

The durability of cement-based materials can be reduced by the invasion of water and ions from external environments. This can be alleviated by reducing the surface wettability. To evaluate the anti-wetting performances of different graphene-based materials, a molecular dynamics simulation was performed to investigate the wetting behaviors of water and NaCl droplets on a tobermorite surface coated with graphene and functionalized graphene (G-NH₂ and G-CH₃). The results demonstrate that functionalized graphene displays weak surface binding with water and ions, significantly weakening droplet wettability. Moreover, functionalized graphene surfaces exhibit reduced ion immobilization capacity compared with a pristine tobermorite surface. It obviously increases the number of free ionic hydration shells, thus amplifying the influence of ionic cage restriction. Specifically for the G-CH₃ surface, the contact angle of the NaCl droplet reaches 94.8°, indicating significant hydrophobicity. Furthermore, the adhesion between functionalized graphene and tobermorite is attributed to the interlocking characteristics of these materials. Hopefully, this study can provide nanoscale insights for the design of functionalized graphene coatings to improve the durability of cement-based materials under harsh environments. Full article

This study presents a green, single-step method for synthesizing nanocomposites based on reduced graphene oxide (RGO) and gold nanoparticles (AuNPs), using sodium citrate as a mild reducing and stabilizing agent. AuNPs were generated from chloroauric acid (HAuCl₄) directly on the surface of graphene oxide (GO), which was simultaneously reduced to RGO. Structural characterization via Transmission Electron Microscopy (TEM), High Resolution TEM (HRTEM) and Selected Area Electron Diffraction (SAED) confirms spherical AuNPs (10–60 nm) distributed on RGO sheets, with indications of nanoparticle aggregation. Dynamic Light Scattering (DLS) and zeta potential analysis support these findings, suggesting colloidal instability with higher RGO content. Biological evaluation demonstrates dose-dependent cytotoxicity in HaCaT keratinocytes, with IC₅₀ values (half maximal inhibitory concentration) decreasing as RGO content is increased. At moderate dilutions (1–25 µL/100 µL), the composites show acceptable cell viability (>70%). Antibacterial assays reveal strong synergistic effects against Escherichia coli, Staphylococcus aureus, and Bacillus subtilis, with sample RGO/Au 0.500/0.175 g/L showing complete E. coli inhibition at low Au content (0.175 g/L). The composite retained activity even in protein-rich media, suggesting potential for antimicrobial applications. These findings highlight the potential of RGO/AuNPs composites as multifunctional materials for biomedical uses, particularly in antimicrobial coatings and targeted therapeutic strategies. Full article

Polyaspartic ester polyurea (PEP) elastomers are highly promising for self-healable protective coatings in industrial applications, yet their broader adoption is limited by insufficient mechanical and corrosion resistance. Herein, we develop a multifunctional PEP nanocomposite by incorporating Jeffamine D2000-functionalized graphene nanoplatelets (F-GNPs), prepared through a one-step mechanochemical process. This strategy promotes strong interfacial bonding and uniform dispersion, yielding synergistic property enhancements. At an optimal loading of 0.3 wt%, the PEP/F-GNP nanocomposite exhibited a substantial performance enhancement, with its tensile and tear strengths augmented by 263.0% and 64.2%, respectively. Moreover, the resulting coating delivered an 84.0% boost in impact resistance on aluminum alloy, along with enhanced substrate adhesion. Electrochemical and salt spray tests further confirmed its exceptional anti-corrosion performance. While the reinforcement strategy presented a classic trade-off with self-healing, it is critical to note that the nanocomposite preserved a high healing efficiency of 83.3% after impact damage. Overall, this scalable interfacial engineering strategy simultaneously enhances the material’s mechanical robustness and protective performance, while striking a favorable balance with its intrinsic self-healing capability, paving the way for next-generation coatings. Full article

Tryptophan (Trp) and tryptamine (Tryp), critical biomarkers in mood regulation, immune function, and metabolic homeostasis, are increasingly recognized for their roles in both oral and systemic pathologies, including neurodegenerative disorders, cancers, and inflammatory conditions. Their rapid, sensitive detection in biofluids such as saliva—a non-invasive, real-time diagnostic medium—offers transformative potential for early disease identification and personalized health monitoring. This review synthesizes advancements in electrochemical sensor technologies tailored for Trp and Tryp quantification, emphasizing their clinical relevance in diagnosing conditions like oral squamous cell carcinoma (OSCC), Alzheimer’s disease (AD), and breast cancer, where dysregulated Trp metabolism reflects immune dysfunction or tumor progression. Electrochemical platforms have overcome the limitations of conventional techniques (e.g., enzyme-linked immunosorbent assays (ELISA) and mass spectrometry) by integrating innovative nanomaterials and smart engineering strategies. Carbon-based architectures, such as graphene (Gr) and carbon nanotubes (CNTs) functionalized with metal nanoparticles (Ni and Co) or nitrogen dopants, amplify electron transfer kinetics and catalytic activity, achieving sub-nanomolar detection limits. Synergies between doping and advanced functionalization—via aptamers (Apt), molecularly imprinted polymers (MIPs), or metal-oxide hybrids—impart exceptional selectivity, enabling the precise discrimination of Trp and Tryp in complex matrices like saliva. Mechanistically, redox reactions at the indole ring are optimized through tailored electrode interfaces, which enhance reaction kinetics and stability over repeated cycles. Translational strides include 3D-printed microfluidics and wearable sensors for continuous intraoral health surveillance, demonstrating clinical utility in detecting elevated Trp levels in OSCC and breast cancer. These platforms align with point-of-care (POC) needs through rapid response times, minimal fouling, and compatibility with scalable fabrication. However, challenges persist in standardizing saliva collection, mitigating matrix interference, and validating biomarkers across diverse populations. Emerging solutions, such as AI-driven analytics and antifouling coatings, coupled with interdisciplinary efforts to refine device integration and manufacturing, are critical to bridging these gaps. By harmonizing material innovation with clinical insights, electrochemical sensors promise to revolutionize precision medicine, offering cost-effective, real-time diagnostics for both localized oral pathologies and systemic diseases. As the field advances, addressing stability and scalability barriers will unlock the full potential of these technologies, transforming them into indispensable tools for early intervention and tailored therapeutic monitoring in global healthcare. Full article

Graphene oxide (GO) is a two-dimensional material with interesting optical properties, widely studied for its potential in ultrasensitive detection of substances and prospective optoelectronic properties. In this study, GO thin films were deposited onto gold layers obtained by direct current (DC) magnetron sputtering, and their Raman scattering response was evaluated. While most Surface Enhanced Raman Scattering (SERS) applications rely on gold nanoparticles, the use of magnetron-sputtered gold films remains relatively underexplored. GO layers were deposited by dip-coating and characterized by micro-Raman spectroscopy and scanning electron microscopy (SEM). Raman spectra of GO on Au samples show a clear enhancement of signal intensity compared to GO on glass, with well-preserved D and G bands and no evident structural degradation. Full article

The combination of polypyrrole (PPy) with graphene has attracted extensive attention as a nonlinear optical material with various optoelectronic applications. Here, we describe the development of PPy nanoplates prepared using a simple spin-coating method. The appropriate volume of the dropped PPy solution was determined to be 50 drops by comparing the surface morphologies, chain structures, elementary compositions, and optical properties of PPy saturable absorbers (SAs). The hybrid PPy/graphene heterostructure SA was obtained using the wet transfer process of a graphene layer. This approach led to significant improvements in optical properties, including a ~7.2% increase in linear optical absorption, a 2.5-fold increase in modulation depth, and a third decrease in saturable intensity at 1550 nm due to the additional optical absorption and the π-π interaction between PPy nanoplates and the graphene layer. By inserting the PPy/graphene heterostructure SA into the passively mode-locked fiber laser cavity, 1559 nm ultrashort laser pulses were generated, with an average output power of 1.24 mW, a 815 fs pulse width, and a repetition frequency of 3.26 MHz. Our experimental results demonstrate that the prepared PPy SA has excellent nonlinear optical characteristics, providing a new opportunity for the generation of ultrashort laser pulses. Full article

Carbide-bonded graphene (CBG) coating, with its unique 3D cross-linked network structure, shows significant potential for protecting silicon substrates. However, a comprehensive understanding of its macroscale tribological properties remains lacking. This study investigated the macroscale friction and wear behaviors of CBG-coated silicon wafers using reciprocating sliding tests against steel balls under various loads and sliding cycles. The CBG coating exhibited excellent friction-reduction and anti-wear performance, reducing the steady friction coefficient from 0.80 to 0.17 and wear rate by an order of magnitude compared to those of bare silicon. Higher loads slightly decreased both friction coefficients and wear rates, primarily due to the formation of denser tribofilms and transfer layers. Re-running experiments revealed three distinct wear stages—adhesive, abrasive, and accelerated substrate wear—driven by the evolution of tribofilms, transfer layers, and unabraded flat areas. Furthermore, comparative experiments confirmed that these “unabraded flat areas” on the wear track play a critical role in sustaining low friction and prolonging coating life. The findings identify CBG as a robust solid lubricant for high-contact-pressure applications and emphasize the influence of tribo-layer dynamics and wear debris behavior on coating performance. Full article

The reaction tank of process wastewater, as one of the key pieces of equipment for wastewater treatment, is exposed to an acidic and alkaline wastewater immersion environment for a long time and is prone to the influence of complex ions in water, resulting in concrete shedding and steel bar corrosion, which seriously affect service performance. To address the issue of ionic erosion in process wastewater reaction tanks, a silicon–oxygen grid substrate was constructed with ethyl orthosilicate, and graphene oxide was used as the corrosion-resistant functional component to prepare GO/SiO₂ corrosion-resistant films under acid-catalyzed conditions. Extreme corrosion environments were designed to evaluate the corrosion resistance of GO/SiO₂ films. The results showed that the permeability of the uncoated samples decreased significantly, and the ion concentration leached in the corrosive medium was higher. The permeability of the GO/SiO₂-coated samples did not decrease significantly, and the ion leaching concentration in the corrosive medium gradually decreased with the increase in GO content, verifying the positive correlation between GO content and corrosion resistance and GO’s use in the field of corrosion resistance in water treatment facilities. Full article

Over the last few decades, polymer composites have been rapidly making inroads in critical applications of electrical storage devices such as batteries and supercapacitors. Structural supercapacitor composites (SSCs) have emerged as multifunctional materials capable of storing energy while bearing mechanical loads, offering lightweight and compact solutions for energy systems. This study investigates the functionalization of Bisphenol A-based thermosetting polymers with ionic liquids, aiming to synthesize dual-functional structural electrolytes for SSC fabrication. A multifunctional sandwich structure was subsequently fabricated, in which the fabricated SSC served as the core layer, bonded between two structurally robust outer skins. The core layer was fabricated using carbon fibre layers coated with 10% graphene nanoplatelets (GNPs), while the skin layers contained 0.25% GNPs dispersed in the resin matrix. The developed device demonstrated stable operation up to 85 °C, achieving a specific capacitance of 57.28 mFcm⁻² and an energy density of 179 mWhm⁻² at room temperature. The performance doubled at 85 °C, maintaining excellent capacitance retentions across all experimented temperatures. The flexural strength of the developed sandwich SSC at elevated temperature (at 85 °C) was 71 MPa, which exceeds the minimum requirement for roofing sheets as specified in Australian building standard AS 4040.1 (Methods of testing sheet roof and wall cladding, Method 1: Resistance to concentrated loads). Finite element analysis (FEA) was performed using Abaqus CAE to evaluate structural integrity under mechanical loading and predict damage initiation zones under service conditions. The simulation was based on Hashin’s failure criteria and demonstrated reasonable accuracy. This research highlights the potential of multifunctional polymer composite systems in renewable energy infrastructure, offering a robust and energy-efficient material solution aligned with circular economy and sustainability goals. Full article

The growing challenge of biofilm-associated infections in dentistry necessitates advanced solutions. This review highlights the potential of smart bioactive and antibacterial materials—bioactive glass ceramics (BGCs), silver nanoparticle (AgNP)-doped polymers, and pH-responsive chitosan coatings—in transforming restorative dentistry. BGCs reduce biofilms by >90% while promoting bone integration. AgNP-polymers effectively combat S. mutans and C. albicans but require controlled dosing (<0.3 wt% in PMMA) to avoid cytotoxicity. Chitosan coatings enable pH-triggered drug release, disrupting acidic biofilms. Emerging innovations like quaternary ammonium compounds, graphene oxide hybrids, and 4D-printed hydrogels offer on-demand antimicrobial and regenerative functions. However, clinical translation depends on addressing cytotoxicity, standardizing antibiofilm testing (≥3-log CFU/mL reduction), and ensuring long-term efficacy. These smart materials pave the way for self-defending restorations, merging infection control with tissue regeneration. Future advancements may integrate AI-driven design for multifunctional, immunomodulatory dental solutions. Full article

Recently, there has been increased interest in NASICON-type electrodes for sodium-ion batteries due to their unique combination of intercalation properties, low cost, and safety. However, their commercialization is hindered by the low electrical conductivity. One strategy to overcome this issue is to integrate NASICON materials with carbon additives. This study shows that carbon additives improve the sodium storage performance of a NASICON-type electrode in various ways, depending on the additives’ functional groups, texture, and conductivity properties. The proof-of-concept is based on a multi-electron phospho-sulphate electrode, NaFeVPO₄(SO₄)₂ (NFVPS) mixed with carbon black (C) and reduced graphene oxide (rGO). Carbon-coated samples are obtained via a simple ball milling procedure followed by thermal treatment in an argon flow. Sodium storage in the composites occurs through capacitive and Faradaic reactions. The Faradaic reaction is facilitated at the carbon black composite, while the capacitive reaction dominates for the rGO composite. NFVPS operates through two-electron reactions at 20 °C, while the increased temperatures favor the three-electron reaction. The rGO composite outperforms the carbon black composite in terms of cycling stability and rate capability at 20 and 40 °C. The role of the rGO and carbon black in electrochemical performance is discussed based on the different reactivity of hydroxyl/epoxide and carbonyl functional groups with the electrolyte salt, NaPF₆, and the solvent, polypropylene carbonate. Full article

We have demonstrated the fabrication of laminate composites with functional features to demonstrate energy storage capabilities. The present study investigates the surface modification of carbon fibers by coating dual materials of reduced graphene oxide (rGO) and cellulose-based activated carbon to enhance their energy storage capacitance for the development of structural supercapacitors. The dual coating on carbon fibers enabled a near 210-fold improvement in surface area, surpassing that of pristine carbon fibers. This formed a highly porous graphene network with activated carbon, resulting in a well-connected fiber–graphene-activated carbon network on carbon fibers. The electrochemical supercapacitor, fabricated from surface-functionalized carbon fibers, provides the best performance, with a specific capacitance of 172 F g⁻¹ in an aqueous electrolyte. Furthermore, the symmetrical structural supercapacitor (SSSC) device delivered a specific capacitance of 227 mF g⁻¹ across a wide potential window of 6 V. The electrochemical stability of the SSSC device was validated by a high capacitance retention of 97.3% over 10,000 cycles. Additionally, the study showcased the practical application of this technology by successfully illuminating an LED using the proof-of-concept SSSC device with G-aC/CF electrodes. Overall, the findings of this study highlight the potential of carbon fiber composites as a promising hybrid material, offering both structural integrity and a functional performance suitable for aerospace and automobile applications. Full article

Enhanced Giant Magneto-Impedance (GMI) effects of composite materials play a crucial role in producing devices with a good soft magnetic property. To improve this soft magnetic property, graphene is introduced to increase the conductivity of composite materials. However, the quality of graphene layers restricts the enhancement of GMI effects. There are few reports on the direct growth of graphene on Fe_73.5Si_13.5B₉Cu₁Nb₃ (FINEMET). In this paper, the composite ribbons of FINEMET coated with as-grown graphene are prepared by chemical vapor deposition (CVD), which is much better than previous results obtained by methods such as the transfer method or electroless plating in quality. The Ni layer, with good magnetic conductivity, is induced to the FINEMET as an auxiliary layer by the magnetron sputtering method for high-quality graphene-layer growth due to its high carbon dissolution rate. The results show that the growth temperature of the as-grown graphene layer on the FINEMET with the best GMI ratio could reach as high as 560 °C. Moreover, it was found that an Ni layer thickness of 300 nm has a crucial impact on GMI, with the maximum ratio reaching 76.8%, which is 1.9 times that of an initial bare FINEMET ribbon (39.7%). As a result, the direct growth of graphene layers on FINEMET ribbons by the CVD method is a promising way to light GMI-based devices. Full article