Search Results (382)

The application of microsphere molecularly imprinted materials for the targeted extraction and purification of flavonoids derived from agricultural waste has emerged as a prominent area of investigation. An innovative boronate affinity imprinted microsphere (MC-CD@BA-MIP) was successfully synthesized using the Pickering emulsion interfacial assembly strategy for the selective separation of naringin (NRG). The double-bond functionalized covalent organic framework (COF)-based microspheres were synthesized through Schiff–base reaction and secondary interfacial emulsion polymerization. Then, the synthetic mono-(6-mercapto-6-deoxy)-β-cyclodextrin (SH-β-CD) was grafted onto the surface of the microspheres (MC) using click chemistry. The 1-allylpyridine-3-boronic acid (APBA) as a functional monomer was grafted onto the initiator (ABIB) through atom transfer radical polymerization (ATRP). Ultimately, the synthesized boronic acid-imprinted ABIB-BA-MIPs were immobilized onto the COFs microsphere surface through host–guest interactions. As expected, under neutral conditions, the MC-CD@BA-MIPs still exhibited a significant adsorption capacity (38.78 μmol g⁻¹ at 308 K) for NRG. The regenerated MC-CD@BA-MIPs maintained 92.56% of their initial adsorption capacity through six consecutive cycles. Full article

Cyclodextrins in metal oxide nanoparticles (NPs) serve as stabilizing, dispersing, and functionalizing agents that enhance antimicrobial performance through better nanoparticle stability, synergistic action, and potential controlled release mechanisms, making them ideal for advanced biomedical and environmental antimicrobial applications. In this study, NPs of vanadium pentoxide (V₂O₅) were obtained by the precipitation method, and, following a supramolecular assembly, were synthesized using the impregnation method via addition of β-cyclodextrin (BCD) and its derivatives, such as hydroxypropyl-β-cyclodextrin (HCD) and methyl-β-cyclodextrin (MCD). The formation of the V₂O₅:CDs was driven by non-covalent host–guest interactions, leading to a stable supramolecular structure with enhanced physicochemical properties. Morphological analysis using scanning electron microscopy (SEM) revealed uniformly distributed V₂O₅ NPs within the CD matrix. Structural characterization was further supported by proton nuclear magnetic resonance (NMR) spectroscopy, which confirmed the inclusion interactions between V₂O₅ and CDs. The synthesized NPs demonstrated significant antimicrobial activity against Gram-positive and fungal strains, indicating a synergistic enhancement in bioactivity due to the supramolecular architecture. This work highlights the potential of CD-assisted V₂O₅ NPs as promising antimicrobial agents for biomedical and environmental applications. Full article

Non-covalent and dynamic covalent interactions enable supramolecular systems to function as adaptive platforms in biomedical research, offering novel strategies for precision medicine applications. This review examines five-year developments in supramolecular applications across precision medical domains, including disease diagnosis, bioimaging, targeted drug delivery, tissue engineering, and gene therapy. The review begins by systematically categorizing supramolecular structures into dynamic covalent systems (e.g., disulfide bonds, boronate esters, and hydrazone bonds) and dynamic non-covalent systems (e.g., host–guest interactions, hydrogen-bond networks, metal coordination, and π–π stacking), highlighting current strategies employed to optimize their responsiveness, stability, and targeting efficiency. Representative case studies, such as cyclodextrin-based nanocarriers and metal–organic frameworks (MOFs), are thoroughly analyzed to illustrate how supramolecular systems can enhance precision in drug delivery and improve biocompatibility. Furthermore, this article critically discusses major challenges faced during clinical translation, encompassing structural instability, inadequate specificity of environmental responsiveness, pharmacokinetic and toxicity concerns, and difficulties in scalable manufacturing. Potential future directions to overcome these barriers are proposed, emphasizing biomimetic interface engineering and dynamic crosslinking strategies. Collectively, the continued evolution in structural optimization and functional integration within supramolecular systems holds great promise for achieving personalized diagnostic and therapeutic platforms, thereby accelerating their translation into clinical practice and profoundly shaping the future landscape of precision medicine. Full article

Methicillin-resistant S. aureus is a problematic pathogen due to its high-risk infections and resistance mechanisms. To fight against this bacterium, novel antimicrobial sources and new delivery systems must be developed. Antimicrobial polyurethanes for developing biomaterials can function as preventive strategies. In this study, we explore the synthesis of partially renewable polyurethanes as biomaterial carriers of novel antimicrobials. An antibacterial extract from a Streptomyces sp. strain and its inclusion complexes with β-cyclodextrin, used as an additional protective approach, were incorporated into castor oil-based polyurethane films through bulk or surface loading. The inclusion complexes were characterized to confirm host–guest interactions. The films were characterized by FTIR, XRD spectra, surface SEM images, hydrophilicity, thermal stability, and mechanical performance. FTIR suggested successful polyurethane synthesis. The polymers were semicrystalline and thermally stable until 260 °C, and Tg ranged between −16.9 and −9 °C. Bulk modification decreased the mechanical performance of the films. Surface modification promoted good antibacterial performance but cytotoxic potential against HDFa cells. However, PU active films showed favorable properties and hemocompatibility, making them a promising alternative for applications such as short-term dressings, serving as an antimicrobial delivery system and a preventive strategy against methicillin-resistant S. aureus. Full article

Traditional petroleum engineering materials have problems such as single functionality and poor environmental adaptability in terms of lost circulation control and enhanced oil recovery. Supramolecular gels, with their dynamic reversible non-covalent network structure, demonstrate unique advantages in this regard. This paper classifies supramolecular gels into hydrogen bond type, metal coordination type, host–guest type, and electrostatic interaction type based on differences in crosslinking structures. It explains the construction principles and characteristics of each type of gel and analyses their application progress in petroleum engineering fields, such as lost circulation control in drilling, temporary plugging in fracturing, and profile control in enhanced oil recovery. It also discusses the advantages and disadvantages of different systems and future development directions. Research has shown that the molecular design strategy of supramolecular gels can effectively address technical challenges under complex conditions, offering new insights for oil and gas field development. Further optimization of their long-term stability and large-scale production technology is needed to advance their practical application. Full article

To address the challenge of developing the first squaramide-based ion pair receptor acting as an iniferter in the polymerization process, a well-known BDPA molecule with specific radical functions was incorporated into its structure. The developed ditopic receptor demonstrated the ability to cooperatively bind ion pairs. Moreover, it proved to be an effective iniferter in the polymerization reaction using methyl methacrylate. The polymerization process preserved the ion-binding properties of the receptor, enabling the formation of functional polymeric materials. It was shown that the resulting polymer with the embedded receptor can be used for salt extraction from both solid and liquid phases, whereas the reference receptor lacking the BDPA unit did not exhibit this capability. This opens new avenues for the design of intelligent and selective polymeric materials for applications in supramolecular chemistry and separation technologies. Full article

Cyclodextrins (CDs), cyclic oligosaccharides formed by α-1,4-glycosidic-bonded D-glucopyranose units, feature unique hydrophobic cavities and hydrophilic exteriors that enable molecular encapsulation via host–guest interactions. CDs form supramolecular host–guest complexes with diverse molecular entities, establishing their fundamental role in supramolecular chemistry. This review examines fabrication strategies for CD-based supramolecular hydrogels and their applications in tissue engineering and regenerative medicine, with focused analysis on wound healing, corneal regeneration, and bone repair. We critically analyze CD–guest molecular interaction mechanisms and innovative therapeutic implementations, highlighting the significant potential of CD hydrogels for tissue regeneration while addressing clinical translation challenges and future directions. Full article

In this study, we systematically investigated the adsorption behavior of a titanium-based metal–organic framework (MOF) sensing layer on five primary alcohol homologs using the quartz crystal microbalance (QCM) technique. Unexpectedly, response signals were significantly enhanced for molecules exceeding the framework’s pore dimensions, contradicting conventional molecular sieving models. Further investigations revealed that the adsorption time constant (${\tau }_a$) is linearly proportional to the molecular diameter ($R^2=0.952$) and the integral response (AUC) increases almost exponentially with the molecular weight ($R^2=0.891$). Although the effective diffusion coefficient ($D_{\mathrm{eff}}$) decreases with increasing molecular size ($D_{\mathrm{eff}}\propto d^{-5.96}$, $R^2=0.981$), the normalized diffusion hindrance ratio ($D_{\mathrm{eff}}/D_{\mathrm{gas}}$) decreases logarithmically with an increasing diameter. Larger responses result from stronger host–guest interactions with the framework despite significant diffusion limitations for larger molecules. These findings demonstrate the synergistic regulation of adsorption and diffusion in MOF-QCM systems. Our investigation experimentally elucidates the ’size-selectivity paradox’ in microporous sensing interfaces and establishes a quantitative framework for optimizing sensor performance through balanced control of diffusion kinetics and interfacial interactions in similar materials. Full article

Cyclodextrins (CDs) are cyclic oligosaccharides capable of forming inclusion complexes with various guest molecules, enhancing solubility, stability, and bioavailability. This review outlines the structural features of native CDs and their chemically modified derivatives, emphasizing the influence of functionalization on host–guest interactions. Synthetic approaches for CD derivatization are summarized, with attention to recent developments in stimuli-responsive systems and targeted drug delivery. Analytical techniques commonly employed for characterizing CD complexes, such as spectroscopy, thermal analysis, and molecular modeling, are briefly reviewed. Applications in pharmaceutical formulations are discussed, including inclusion complexes, CD-based conjugates, and nanocarriers designed for solubility enhancement, controlled release, and site-specific delivery. Special consideration is given to emerging multifunctional platforms with biomedical relevance. The regulatory status of CDs is addressed, with reference to FDA- and EMA-approved formulations. Safety profiles and toxicological considerations associated with chemically modified CDs, particularly for parenteral use, are highlighted. This review presents an integrative perspective on the design, characterization, and application of CD-based systems, with a focus on translational potential and current challenges in pharmaceutical development. Full article

This work represents the first use of a phosphonium salt-functionalized β-Cyclodextrin polymer (β-CDP) as a highly selective sensing membrane for monitoring the safety of drinking water against perchlorate ions (ClO₄⁻) using electrochemical impedance spectroscopy (EIS). Structural confirmation via ¹H NMR, ¹³C NMR, ³¹P NMR, and FT-IR spectroscopies combined with AFM and contact angle measurements demonstrate how the enhanced solubility of modified cyclodextrin improves thin film quality. The innovation lies in the synergistic combination of two detection mechanisms: the “Host-Guest” inclusion in the cyclodextrin cavity and anionic exchange between the bromide ions of the phosphonium groups and perchlorate anions. Under optimized functionalization conditions, EIS reveals high sensitivity and selectivity, achieving a record-low detection limit (LOD) of ~10⁻¹² M and a wide linear range of detection (10⁻¹¹ M–10⁻⁴ M). Sensing mechanisms at the functionalized transducer interfaces are examined through numerical fitting of Cole-Cole impedance spectra via a single relaxation equivalent circuit. Real water sample analysis confirms the sensor’s practical applicability, with recoveries between 96.9% and 109.8% and RSDs of 2.4–4.8%. Finally, a comparative study with reported membrane sensors shows that β-CDP offers superior performance, wider range, higher sensitivity, lower LOD, and simpler synthesis. Full article

Innovative functional materials integrating host–guest complexes in cryogels offer promising applications in topical drug delivery, enhancing drug solubility and stability. In this study, we designed and developed a cryogel-based patch for acne treatment by polymerizing an acrylate-functionalized γ-cyclodextrin (γ-CD) and trimethoprim (TMP) inclusion complex with [2-(acryloyloxy)ethyl]trimethylammonium chloride (AETMA) at low temperatures. A multistep workflow was applied to synthesize the inclusion complex via mortar-assisted kneading, followed by cryogel formulation through radical cryopolymerization. The resulting hybrid system leverages the cationic nature of AETMA to promote adhesion and electrostatic interactions with the skin surface. At the same time, γ-CD serves as a drug reservoir, facilitating sustained release of the drug. The system was characterized by FT-IR, TGA, and SEM analyses. In vitro release studies demonstrated a sustained TMP release profile, best described by the Korsmeyer–Peppas diffusion model. Antibacterial assays confirmed the system’s effectiveness against Staphylococcus aureus, supporting its potential for localized and prolonged acne treatment. Moreover, cytocompatibility tests demonstrated that the formulation is biocompatible, further validating its suitability for topical application. Full article

This study presents a methodology for developing a cyclodextrin-based delivery system for ceftobiprole, a poorly water-soluble and amphoteric drug, chemically stable in acidic conditions. Ceftobiprole is a broad-spectrum cephalosporin antibiotic administered clinically as its water-soluble prodrug, ceftobiprole medocaril, due to limited aqueous solubility of the parent compound. Solubility enhancement was achieved through complexation with anionic sulfobutylether-β-cyclodextrin (SBE-β-CD). At a pH below 3, ceftobiprole is protonated and cationic, which facilitates electrostatic interactions with the anionic cyclodextrin. An optimised high-performance liquid chromatography (HPLC) method was used to assess solubility, the impurity profile, and long-term chemical stability. X-ray powder diffraction (XRPD) confirmed the amorphous nature of the system and the absence of recrystallization. Nuclear magnetic resonance (NMR) and attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy supported the formation of a host–guest complex. The freeze-dried system prepared from 0.1 M formic acid solution contained negligible residual acid due to nearly complete sublimation. The most promising formulation was a ternary system of ceftobiprole, maleic acid, and SBE-β-CD (1:25:4 molar ratio), showing ~300-fold solubility improvement, low levels of degradation products, and stability after eight months at −20 °C. After pH adjustment to a parenterally acceptable level, the formulation demonstrated solubility and a pH comparable to the marketed drug product. Full article

The interaction between cucurbit[8]uril (Q[8]) and the guest 1-methyl-4-(4-(1-methylpyridin-1-ium-4-yl)benzamido)pyridin-1-ium (PB²⁺) has been thoroughly investigated. Multiple techniques were employed, including ¹H NMR spectroscopy, mass spectrometry, isothermal titration calorimetry (ITC), UV–vis absorption spectrophotometry, and quantum chemistry calculations. The experimental results and calculation analysis have clearly shown that in aqueous solution, the host Q[8] preferentially encapsulates the phenylpyridinium salt moiety of the PB²⁺ guest within its hydrophobic cavity, forming a 1:2 inclusion complex. Full article

The complexation of nabumetone (NAB) and naproxen (NAP) with cucurbit[7]uril (CB7) was investigated in aqueous solution by isothermal titration microcalorimetry, mass spectrometry, NMR spectroscopy, and computation methods. High-resolution mass spectrometry was used for the determination of the binding stoichiometry and the gas-phase stability of the drug–CB7 complex. The doubly charged NH₄⁺ or Na⁺ adducts of the 1:1 complex were observed in the mass spectra. The dissociation of complexes was monitored at different collision energies, (1–16) eV, leading to the neutral loss of NH₃ and the drug, with charge retention observed on CB7. By performing ITC experiments, all the thermodynamic parameters were determined for the NAB-CB7 complex in water at 25 °C. The corresponding values amounted to the following: logK = 4.66 ± 0.01; Δ_rG° = −26.7 ± 0.1 kJ/mol; Δ_rH° = −20.2 ± 0.7 kJ/mol; TΔ_rS° = 6.4 ± 0.8 kJ/mol, i.e., the formation of the inclusion complex is enthalpy driven and has a favorable entropy. The inclusion phenomena were further confirmed by NMR spectroscopy (¹H, ROESY, and DOSY), suggesting the encapsulation of the naphthalene ring of both drugs inside the CB7 cavity. The results of the DFT calculations and the IGMH analysis were in accordance with the experimental ones, suggesting that van der Waals interactions play a major role in drug–CB7 complexation. Full article

This review highlights how advances in silico techniques have shed new light on phenomena in confined supramolecular resorcinarene-based systems. Computational studies have provided detailed insights into capsule formation, their dynamic behavior, guest encapsulation and reaction mechanisms within these hosts, often revealing information that experimental methods cannot reach. The focus is placed on the self-assembly of resorcin[4]arenes, pyrogallol[4]arenes, velcrands, and octa acid systems. These computational studies complement experimental findings and, in many cases, offer new perspectives that are inaccessible using experimental techniques alone. Supramolecular architectures are growing in complexity the role of in silico approaches is becoming indispensable. They offer a way to design rationally and understand host–guest chemistry more deeply. Full article