Search Results (408)

Electronic-waste (e-waste) management is a key challenge in engineering smart cities due to its rapid accumulation, complex composition, sparse data availability, and significant environmental and economic impacts. This study employs a bespoke machine learning infrastructure on an Indian e-waste supply chain network (SCN) focusing on the three pillars of sustainability—environmental, economic, and social. The economic resilience of the SCN is investigated against external perturbations, like market fluctuations or policy changes, by analyzing six stochastically perturbed modules, generated from the optimal point of the original dataset using Monte Carlo Simulation (MCS). In the process, MCS is demonstrated as a powerful technique to deal with sparse statistics in SCN modeling. The perturbed model is then analyzed to uncover “hidden” non-linear relationships between key variables and their sensitivity in dictating economic arbitrage. Two complementary ensemble-based approaches have been used—Feedforward Neural Network (FNN) model and Random Forest (RF) model. While FNN excels in regressing the model performance against the industry-specified target, RF is better in dealing with feature engineering and dimensional reduction, thus identifying the most influential variables. Our results demonstrate that the FNN model is a superior predictor of arbitrage conditions compared to the RF model. The tangible deliverable is a data-driven toolkit for smart engineering solutions to ensure sustainable e-waste management. Full article

Desertification threatens the sustainability of dryland ecosystems, yet many existing monitoring frameworks rely on static maps, coarse spatial resolution, or lack temporal forecasting capacity. To address these limitations, this study introduces PyGEE-ST-MEDALUS, a novel spatiotemporal framework combining the full MEDALUS desertification model with deep learning (CNN, LSTM, DeepMLP) and machine learning (RF, XGBoost, SVM) techniques on the Google Earth Engine (GEE) platform. Applied across Tebessa Province, Algeria (2001–2028), the framework integrates MODIS and Sentinel-1/-2 data to compute four core indices—climatic, soil, vegetation, and land management quality—and create the Desertification Sensitivity Index (DSI). Unlike prior studies that focus on static or spatial-only MEDALUS implementations, PyGEE-ST-MEDALUS introduces scalable, time-series forecasting, yielding superior predictive performance (R² ≈ 0.96; RMSE < 0.03). Over 71% of the region was classified as having high to very high sensitivity, driven by declining vegetation and thermal stress. Comparative analysis confirms that this study advances the state-of-the-art by integrating interpretable AI, near-real-time satellite analytics, and full MEDALUS indicators into one cloud-based pipeline. These contributions make PyGEE-ST-MEDALUS a transferable, efficient decision-support tool for identifying degradation hotspots, supporting early warning systems, and enabling evidence-based land management in dryland regions. Full article

Accurate rice yield prediction is essential for optimizing water management and supporting decision-making in agricultural systems, particularly in arid environments where irrigation efficiency is critical. This study assessed five machine learning algorithms—Multiple Linear Regression (MLR), Support Vector Regression (SVR, linear and RBF), Partial Least Squares Regression (PLSR), Random Forest (RF), and Extreme Gradient Boosting (XGBoost)—for plot-scale rice yield estimation using Sentinel-2 vegetation indices (VIs) during the 2022 and 2023 seasons in the Chancay–Lambayeque Valley, Peru. VIs sensitive to canopy vigor, water status, and structure were derived in Google Earth Engine and optimized via Sequential Forward Selection to identify the most relevant predictors per phenological stage. Models were trained and validated against field yields using leave-one-out cross-validation (LOOCV). Intermediate stages (Flowering, Milk, Dough) yielded the strongest relationships, with water-sensitive indices (NDMI, MSI) consistently ranked as key predictors. MLR and PLSR achieved the highest generalization (R²_CV up to 0.68; RMSE_CV ≈ 1.3 t ha⁻¹), while RF and XGBoost showed high training accuracy but lower validation performance, indicating overfitting. Model accuracy decreased in 2023 due to climatic variability and limited satellite observations. Findings confirm that Sentinel-2–based VI modeling offers a cost-effective, scalable alternative to UAV data for operational rice yield monitoring, supporting water resource management and decision-making in data-scarce agricultural regions. Full article

Coasts are critical ecological, economic and social interfaces between terrestrial and marine systems. The current upsurge in the acquisition and availability of remote sensing datasets, such as Landsat remote sensing data series, provides new opportunities for analyzing multi-decadal coastal changes and other components of coastal risk. The emergence of machine learning-based techniques represents a new trend that can support large-scale coastal monitoring and modeling using remote sensing big data. This study presents a comprehensive multi-decadal analysis of coastal changes for the period from 1990 to 2024 using Landsat remote sensing data series along the eastern and southern coasts of Peninsular Malaysia. These coastal regions include the states of Kelantan, Terengganu, Pahang, and Johor. An innovative approach combining deep learning-based shoreline extraction with the Digital Shoreline Analysis System (DSAS) was meticulously applied to the Landsat datasets. Two semantic segmentation models, U-Net and DeepLabV3+, were evaluated for automated shoreline delineation from the Landsat imagery, with U-Net demonstrating superior boundary precision and generalizability. The DSAS framework quantified shoreline change metrics—including Net Shoreline Movement (NSM), Shoreline Change Envelope (SCE), and Linear Regression Rate (LRR)—across the states of Kelantan, Terengganu, Pahang, and Johor. The results reveal distinct spatial–temporal patterns: Kelantan exhibited the highest rates of shoreline change with erosion of −64.9 m/year and accretion of up to +47.6 m/year; Terengganu showed a moderated change partly due to recent coastal protection structures; Pahang displayed both significant erosion, particularly south of the Pahang River with rates of over −50 m/year, and accretion near river mouths; Johor’s coastline predominantly exhibited accretion, with NSM values of over +1900 m, linked to extensive land reclamation activities and natural sediment deposition, although local erosion was observed along the west coast. This research highlights emerging erosion hotspots and, in some regions, the impact of engineered coastal interventions, providing critical insights for sustainable coastal zone management in Malaysia’s monsoon-influenced tropical coastal environment. The integrated deep learning and DSAS approach applied to Landsat remote sensing data series provides a scalable and reproducible framework for long-term coastal monitoring and climate adaptation planning around the world. Full article

The integration of artificial intelligence (AI) and machine learning (ML) has revolutionised civil engineering, enhancing predictive accuracy, decision-making, and sustainability across domains such as structural health monitoring, geotechnical analysis, transportation systems, water management, and sustainable construction. This paper presents a detailed review of peer-reviewed publications from the past decade, employing bibliometric mapping and critical evaluation to analyse methodological advances, practical applications, and limitations. A novel taxonomy is introduced, classifying AI/ML approaches by civil engineering domain, learning paradigm, and adoption maturity to guide future development. Key applications include pavement condition assessment, slope stability prediction, traffic flow forecasting, smart water management, and flood forecasting, leveraging techniques such as Convolutional Neural Networks (CNNs), Long Short-Term Memory (LSTM), Support Vector Machines (SVMs), and hybrid physics-informed neural networks (PINNs). The review highlights challenges, including limited high-quality datasets, absence of AI provisions in design codes, integration barriers with IoT-based infrastructure, and computational complexity. While explainable AI tools like SHAP and LIME improve interpretability, their practical feasibility in safety-critical contexts remains constrained. Ethical considerations, including bias in training datasets and regulatory compliance, are also addressed. Promising directions include federated learning for data privacy, transfer learning for data-scarce regions, digital twins, and adherence to FAIR data principles. This study underscores AI as a complementary tool, not a replacement, for traditional methods, fostering a data-driven, resilient, and sustainable built environment through interdisciplinary collaboration and transparent, explainable systems. Full article

Electric fields (EFs) have emerged as effective, non-chemical tools for modulating microbial populations in complex matrices such as wastewater. This review consolidates current advances on EF-induced alterations in microbial structures and functions, focusing on both vegetative cells and spores. Key parameters affected include membrane thickness, transmembrane potential, electrical conductivity, and dielectric permittivity, with downstream impacts on ion homeostasis, metabolic activity, and viability. Such bioelectrical modifications underpin EF-based detection methods—particularly impedance spectroscopy and dielectrophoresis—which enable rapid, label-free, in situ microbial monitoring. Beyond detection, EFs can induce sublethal or lethal effects, enabling selective inactivation without chemical input. This review addresses the influence of field type (DC, AC, pulsed), intensity, and exposure duration, alongside limitations such as species-specific variability, heterogeneous environmental conditions, and challenges in achieving uniform field distribution. Emerging research highlights the integration of EF-based platforms with biosensors, machine learning, and real-time analytics for enhanced environmental surveillance. By linking microbiological mechanisms with engineering solutions, EF technologies present significant potential for sustainable water quality management. Their multidisciplinary applicability positions them as promising components of next-generation wastewater monitoring and treatment systems, supporting global efforts toward efficient, adaptive, and environmentally benign microbial control strategies. Full article

Air quality monitoring and forecasting have become increasingly critical in urban environments due to rising pollution levels and their impact on public health. Recent advances in Internet of Things (IoT) technology and machine learning offer promising alternatives to traditional monitoring stations, which are limited by high costs and sparse deployment. This paper presents the development of a real-time, low-cost air quality forecasting system that integrates IoT-based sensing units with predictive machine learning algorithms. The proposed system employs low-cost gas sensors and microcontroller-based hardware to monitor pollutants such as particulate matter, carbon monoxide, carbon dioxide and volatile organic compounds. A fully functional prototype device was designed and manufactured using Fused Deposition Modeling (FDM) with modular and scalable features. The data acquisition pipeline includes on-device adjustment, local smoothing, and cloud transfer for real-time storage and visualization. Advanced feature engineering and a multi-model training strategy were used to generate accurate short-term forecasts. Among the models tested, the GRU-based deep learning model yielded the highest performance, achieving $R^2$ values above 0.93 and maintaining latency below 130 ms, suitable for real-time use. The system also achieved over 91% accuracy in health-based AQI category predictions and demonstrated stable performance without sensor saturation under high-pollution conditions. This study demonstrates that combining embedded hardware, real-time analytics, and ML-driven forecasting enables robust and scalable air quality management solutions, contributing directly to sustainable development goals through enhanced environmental monitoring and public health responsiveness. Full article

The rapid development of fuel cell electric vehicles (FCEVs) has highlighted the critical importance of optimizing energy management strategies to improve vehicle performance, energy efficiency, durability, and reduce hydrogen consumption and operational costs. However, existing approaches often face limitations in real-time applicability, adaptability to varying driving conditions, and computational efficiency. This paper aims to provide a comprehensive review of the current state of FCEV energy management strategies, systematically classifying methods and evaluating their technical principles, advantages, and practical limitations. Key techniques, including optimization-based methods (dynamic programming, model predictive control) and machine learning-based approaches (reinforcement learning, deep neural networks), are analyzed and compared in terms of energy distribution efficiency, computational demand, system complexity, and real-time performance. The review also addresses emerging technologies such as artificial intelligence, vehicle-to-everything (V2X) communication, and multi-energy collaborative control. The outcomes highlight the main bottlenecks in current strategies, their engineering applicability, and potential for improvement. This study provides theoretical guidance and practical reference for the design, implementation, and advancement of intelligent and adaptive energy management systems in FCEVs, contributing to the broader goal of efficient and low-carbon vehicle operation. Full article

Electric vehicle (EV) drivetrains operate at high rotational speeds, which makes the noise, vibration, and harshness (NVH) performance of gear transmissions a critical design factor. Without the masking effect of an internal combustion engine, gear whine can become a prominent source of passenger discomfort. This paper provides the first comprehensive review focused specifically on gear tooth surface waviness, a subtle manufacturing-induced deviation that can excite tonal noise. Periodic, micron-scale undulations caused by finishing processes such as grinding may generate non-meshing frequency “ghost orders,” leading to tonal complaints even in high-quality gears. The article compares finishing technologies including honing and superfinishing, showing their influence on waviness and acoustic behavior. It also summarizes modern waviness detection techniques, from single-flank rolling tests to optical scanning systems, and highlights data-driven predictive approaches using machine learning. Industrial case studies illustrate the practical challenges of managing waviness, while recent proposals such as controlled surface texturing are also discussed. The review identifies gaps in current research: (i) the lack of standardized waviness metrics for consistent comparison across studies; (ii) the limited validation of digital twin approaches against measured data; and (iii) the insufficient integration of machine learning with physics-based models. Addressing these gaps will be essential for linking surface finish specifications with NVH performance, reducing development costs, and improving passenger comfort in EV transmissions. Full article

The document is an updated review, starting from the Special Issue “Molecular Breeding for Abiotic Stress Tolerance in Crops” published in the Int. J. Mol. Sci. It reviews molecular breeding strategies to enhance abiotic stress tolerance in crops, addressing challenges like drought, salinity, temperature extremes, and waterlogging, which threaten global food security. Climate change intensifies these stresses, making it critical to develop resilient crop varieties. Plants adapt to stress through mechanisms such as hormonal regulation (e.g., ABA, ethylene), antioxidant defense (e.g., SOD, CAT), osmotic adjustment (e.g., proline accumulation), and gene expression regulation via transcription factors like MYB and WRKY. Advanced tools, such as CRISPR/Cas9 genome editing, enable precise modifications of stress-related genes, improving tolerance without compromising yield. Examples include rice (OsRR22, OsDST) and wheat (TaERF3, TaHKT1;5). Epigenetic regulation, including DNA methylation and histone modifications, also plays a role in stress adaptation. Specific studies focused on polyamine seed priming for improved germination and stress resistance, cadmium detoxification mechanisms, and genome-wide association studies (GWAS) to identify genetic markers for salt tolerance and yield. Research on salinity tolerance in wheat emphasizes sodium exclusion and tissue tolerance mechanisms. Future perspectives focus on genetic engineering, molecular markers, epigenetic studies, and functional validation to address environmental stress challenges, including the use of AI and machine learning to manage the large amount of data. The review underscores the importance of translating molecular findings into practical applications to ensure sustainable crop production under changing climates. Full article

With the development of technologies and the growing need for accurate positioning inside buildings, the localization method based on Received Signal Strength Indicator (RSSI) fingerprinting is becoming increasingly popular. Its popularity is explained by the relative simplicity of implementation, low cost and the ability to use existing wireless infrastructure. This review article covers all the key aspects of building such systems: from the wireless communication technology and the creation of a radiomap to data preprocessing methods and model training using machine learning (ML) and deep learning (DL) algorithms. Specific recommendations are provided for each stage that can be useful for both researchers and practicing engineers. Particular attention is paid to such important issues as RSSI signal instability, the impact of multipath propagation, differences between devices and system scalability issues. In conclusion, the review highlights the most promising areas for further research. For smart cities, the approaches and recommendations presented in the review contribute to the development of urban services by combining indoor positioning systems with IoT platforms for automation, transport and energy management. Full article

Fodder maize constitutes a key economic crop in Thailand, particularly in the northeastern region, where it significantly contributes to livestock feed production and local economic development. Nevertheless, the planning and management of cultivation areas remain a major challenge, especially in urban and peri-urban agricultural zones, due to the limited availability of spatial data and suitable analytical frameworks. These difficulties are exacerbated in urban settings, where the complexity of land use patterns and high spectral similarity among land cover types hinder accurate classification. The Google Earth Engine (GEE) platform provides an efficient and scalable solution for geospatial data processing, enabling rapid land use classification and spatiotemporal analysis. This study aims to enhance the classification accuracy of fodder maize cultivation areas in Mueang District, Nakhon Ratchasima Province, Thailand—an area characterized by a heterogeneous mix of urban development and agricultural land use. The research integrates GEE with four machine learning algorithms: Random Forest (RF), Support Vector Machine (SVM), Naïve Bayes (NB), and Classification and Regression Trees (CART). Eleven datasets were developed using Sentinel-2 imagery and a combination of biophysical variables, including elevation, slope, Normalized Difference Vegetation Index (NDVI), Normalized Difference Built-up Index (NDBI), and Modified Normalized Difference Water Index (MNDWI), to classify land use into six categories: fodder maize cultivation, urban and built-up areas, forest, water bodies, paddy fields, and other field crops. Among the 44 classification scenarios evaluated, the highest performance was achieved using Dataset 11—which integrated all spectral and biophysical variables—with the SVM classifier. This model attained an overall accuracy of 97.41% and a Kappa coefficient of 96.97%. Specifically, fodder maize was classified with 100% accuracy in both Producer’s and User’s metrics, as well as a Conditional Kappa of 100%. These findings demonstrate the effectiveness of integrating GEE with machine learning techniques for precise agricultural land classification. This approach also facilitates timely monitoring of land use changes and supports sustainable land management through informed planning, optimized resource allocation, and mitigation of land degradation in urban and peri-urban agricultural landscapes. Full article

The paper presents AgriMicro, a modern Farm Management Information System (FMIS) designed to help farmers monitor and optimize corn crops from sowing to harvest, by leveraging cloud technologies and machine learning algorithms. The platform is built on a modular architecture composed of multiple components implemented through microservices such as the weather and soil service, recommendation and alert engine, field service, and crop service—which continuously communicate to centralize field data and provide real-time insights. Through the ongoing exchange of data between these services, different information pieces about soil conditions, crop health, and agricultural operations are processed and analyzed, resulting in predictions of crop evolution and practical recommendations for future interventions (e.g., fertilization or irrigation). This integrated FMIS transforms collected data into concrete actions, supporting farmers and agricultural consultants in making informed decisions, improving field productivity, and ensuring more efficient resource use. Its microservice-based architecture provides scalability, modularity, and straightforward integration with other information systems. The objectives of this study are threefold. First, to specify and design a modular FMIS architecture based on microservices and cloud computing, ensuring scalability, interoperability and adaptability to different farm contexts. Second, to prototype and integrate initial components and Internet of Things (IoT)-based data collection with machine learning models, specifically Random Forest and XGBoost, to provide maize yield forecasting as a proof of concept. Model performance was evaluated using standard predictive accuracy metrics, including the coefficient of determination (R²) and the root mean square error (RMSE), confirming the reliability of the forecasting pipeline and validated against official harvest data (average maize yield) from the Romanian National Institute of Statistics (INS) for 2024. These results confirm the reliability of the forecasting pipeline under controlled conditions; however, in real-world practice, broader regional and inter-annual variability typically results in considerably higher errors, often on the order of 10–20%. Third, to present a Romania based case study which illustrates the end-to-end workflow and outlines an implementation roadmap toward full deployment. As this is a design-oriented study currently under development, several services remain at the planning or early prototyping stage, and comprehensive system level benchmarks are deferred to future work. Full article

Strawberry, as an important global economic crop, its disease prevention and control directly affects yield and quality. Traditional detection means rely on manual observation or traditional machine learning algorithms, which have defects such as low efficiency, high false detection rate, and insufficient adaptability to tiny disease spots and complex environment. To solve the above problems, this study proposes a strawberry disease recognition method based on improved YOLOv8. By systematically acquiring 3146 image data covering seven types of typical diseases, such as gray mold and powdery mildew, a high-quality dataset containing different disease stages and complex backgrounds was constructed. Aiming at the difficulties in disease detection, the YOLOv8 model is optimized in two stages: on the one hand, the ultra-small scale detection head (32 × 32) is introduced to enhance the model’s ability to capture early tiny spots; on the other hand, the convolution and attention fusion module (CAFM) is combined to enhance the feature robustness in complex field scenes through the synergy of local feature extraction and global information focusing. Experiments show that the mAP50 of the improved model reaches 0.96 and outperforms mainstream algorithms such as YOLOv5 and Faster R-CNN in both recall and F1 score. In addition, the interactive system developed based on the PyQT5 framework can process images, videos and camera inputs in real time, and the disease areas are presented intuitively through visualized bounding boxes and category labels, which provides farmers with a lightweight and low-threshold field management tool. This study not only verifies the effectiveness of the improved algorithm but also provides a practical reference for the engineering application of deep learning in agricultural scenarios, which is expected to promote the further implementation of precision agriculture technology. Full article

Natural disasters often result in significant damage to infrastructure, generating vast amounts of debris in towns and water bodies. Timely post-disaster damage assessment is critical for enabling swift cleanup and recovery efforts. This study presents a combination of methods to efficiently estimate and analyze debris on land and on water. Specifically, analyses were conducted at Claytor Lake and Damascus, Virginia where flooding occurred as a result of Hurricane Helene on 27 September 2024. We use the Phoenix U15 motor glider equipped with the GoPro Hero 9 camera to collect aerial imagery. Orthomosaic images and 3D maps are generated using OpenDroneMap (ODM) software, version 3.5.6, providing a detailed view of the affected areas. For lake debris estimation, we employ a hybrid approach integrating machine learning-based tools and traditional techniques. Lake regions are isolated using segmentation methods, and the debris area is estimated through a combination of color thresholding and edge detection. The debris is classified based on the thickness and a volume range of debris is presented based on the data provided by the Virginia Department of Environmental Quality (VDEQ). In Damascus, debris estimation is achieved by comparing pre-disaster LiDAR data (2016) with post-disaster 3D ODM data. Furthermore, we conduct flood modeling using the Hydrologic Engineering Center’s River Analysis System (HEC-RAS) to simulate disaster impacts, estimate the flood water depth, and support urban planning efforts. The proposed methodology demonstrates the ability to deliver accurate debris estimates in a time-sensitive manner, providing valuable insights for disaster management and environmental recovery initiatives. Full article