Search Results (17)

The solvatochromic properties of 48 solvents of three benzo-[f]-quinolinium methylids (BfQs) were analyzed within the theories of the variational model and Abe’s model of the liquid. The electro-optical properties of BfQs in the first excited state were determined based on the charge transfer process that occurs from the ylid carbon to the nitrogen atom. The dipole moments and the polarizabilities in the first excited state were calculated according to the two models. The quantum chemical calculations helped in understanding the relationship between the molecular structure and absorption properties of the ground state. It is concluded that several key parameters modulate the strength of the charge transfer and they work in synergy, and the most important are as follows: (i) isomerism around the single polar bond, and (ii) the properties of the solvent. The link between geometrical conformation and the zwitterionic character make the studied BfQs very sensitive chromophores for sensors and optical switching devices. Full article

The preparation of two 1-acyl-8-pyrrolylnaphthalenes (5 and 6) and one pyrrolone (8) are reported along with the issues complicating the preparations of other compounds. The photophysical behavior of the fused, planar derivative 6 is explored in detail. The fluorescence of 6 shows solvato-chromism due to intramolecular charge transfer in the excited state and enhanced emission in protic solvents. The emission intensity increases very linearly with the H-bond-donating strength of the solvent. Preferential solvation studies, multilinear regression analysis and computational modeling suggest that the fluorescence enhancement results from inhibition of the spin–orbit coupling-promoted intersystem crossing from the π→π* singlet state to an n→π* triplet state. Some of the inhibitions are due to the dielectric stabilization of the excited singlet state. A stronger effect is obtained from H-bonding, which not only further stabilizes the singlet state but also negatively impacts the vibronic coupling between the states. Full article

A novel Schiff base, (E)-4-acetyl-N-(4-hydroxy-3-methoxybenzylidene)aniline (abbreviated as ANHMA), was synthesized and characterized using infrared and ¹H- and ¹³C-NMR spectroscopies. Optical properties in different solvents were evaluated using UV-vis absorption spectroscopy. The compound is shown to exhibit both positive and negative solvatochromism with reversal occurring for solvents with E_T(30)~45 (e.g., DMSO). The solvatochromic behavior of the compound was found to be strongly dependent on the hydrogen bond abilities and polarizability of the solvent, the observed reversal in solvatochromism being explained by the change in the dominant solvent effects in non-polar and polar–aprotic solvents (H-bond acceptor ability of the solvent and polarizability) compared to polar–protic solvents (H-bond donor ability), according to the developed Catalán multiparametric solvatochromic model. In all freshly prepared solutions studied, the (E)-enol-imine tautomer of the compound was found to strongly predominate over the keto-amine tautomeric forms, the latter increasing their populations over time in the presence of H-bond donor/acceptor species. Irradiation of ANHMA with UV light (λ ≥ 311 nm) was also investigated in several solvents and shown to follow a general pattern, with the conversion of the (E)-enol-imine tautomer into the keto-amine forms in a solvent-mediated enol-imine/keto-amine tautomerism, and (Z)→(E) C=C isomerization between the keto-imine forms. The experimental results received support from an extensive series of calculations on the structure and UV-vis spectra of the relevant tautomeric/isomeric forms of the compound performed at the DFT(B3LYP)/6-311++G(d,p) level of approximation (including time-dependent DFT calculations and solvent consideration). Full article

Two charge transfer compounds based on pyridazinium ylids were studied by electronic absorption spectroscopy in binary and ternary solutions, with the purpose of evaluating their descriptors of the first singlet excited state and to estimate the strength of the intermolecular interactions in protic solvents. The molecular descriptors of the excited state were comparatively estimated using the variational method and the Abe model of diluted binary solutions. Analysis of electronic properties using density functional theory was performed for several key solvents, in order to understand the solvatochromic behavior. The DFT calculations revealed that, in the polar and strongly interacting solvents, the carbanion and the terminal group become a stronger electron acceptor. The bathochromic shift of the ICT band was confirmed using DFT calculus. The ability of the two ylids to recognize and discriminate the solvents was analyzed with principal component analysis and with cluster analysis. Although the study was performed in 24 solvents, the results showed that the ylids were most sensitive to alcohols, so they can be a useful tool to identify and classify different types of low-alcoholic solvents. Full article

Polarizable continuum methods (PCM) have been widely employed for simulating solvent effects, in spite of the fact that they either ignore specific interactions in solution or only partially reproduce non-specific contributions. Examples of three solvatochromic dyes with a negative, a positive and a reverse behavior illustrate the achievements and shortcomings of PCM calculations and the causes for their variable success. Even when qualitatively mimicking non-specific solvent effects, departures of calculated values from experimental data may be significant (20–30%). In addition, they can utterly fail to reproduce an inverted behavior that is caused by significant specific contributions by the solvent. As shown through a theoretical model that rationalizes and predicts the solvatochromism of phenolate merocyanines based on DFT (Density Functional Theory) descriptors in the gas phase, PCM shortcomings are to be held responsible for its eventual failure to reproduce experimental data in solution. Full article

In this work, two stilbene derivatives with different substituents on the phenolic core (phenyl and dimethoxyphenyl) were prepared. The fluorosolvatochromic response of their N-propylated derivatives was studied in a solution of twelve different solvents using UV–Vis absorption and fluorescence emission spectra. Both stilbazolium dyes showed a significant negative solvatochromic effect, with a hypsochromic shift in the visible absorption band of approximately 232 nm and 265 nm for phenyl and the dimethoxyphenyl derivative, respectively, when the solvent was changed from water to pyridine. The stilbene derivatives were subsequently N-alkylated with (3-iodopropyl)trimethoxysilane and covalently anchored to the silica surface. The fluorosolvatochromic response of the prepared silicas compared to N-propylated dyes was then evaluated colorimetrically under daylight and UV illumination. The fluorosolvatochromic behaviour of the anchored dyes was preserved on the silica surface; therefore, the modified silicas could be used for the visual detection of colourless liquids. Full article

The field of glucose biosensors for diabetes management has been of great interest over the past 60 years. Continuous glucose monitoring (CGM) is important to continuously track the glucose level to provide better management of the disease. Concanavalin A (ConA) can reversibly bind to glucose and mannose molecules and form a glucose biosensor via competitive binding. Here, we developed a glucose biosensor using ConA and a fluorescent probe, which generated a fluorescent intensity change based on solvatochromism, the reversible change in the emission spectrum dependent on the polarity of the solvent. The direction in which the wavelength shifts as the solvent polarity increases can be defined as positive (red-shift), negative (blue-shift), or a combination of the two, referred to as reverse. To translate this biosensor to a subcutaneously implanted format, Cyanine 5.5 (Cy5.5)-labeled small mannose molecules were used, which allows for the far-red excitation wavelength range to increase the skin penetration depth of the light source and returned emission. Three Cy5.5-labeled small mannose molecules were synthesized and compared when used as the competing ligand in the competitive binding biosensor. We explored the polarity-sensitive nature of the competing ligands and examined the biosensor’s glucose response. Cy5.5-mannotetraose performed best as a biosensor, allowing for the detection of glucose from 25 to 400 mg/dL. Thus, this assay is responsive to glucose within the physiologic range when its concentration is increased to levels needed for an implantable design. The biosensor response is not statistically different when placed under different skin pigmentations when comparing the percent increase in fluorescence intensity. This shows the ability of the biosensor to produce a repeatable signal across the physiologic range for subcutaneous glucose monitoring under various skin tones. Full article

Fifteen push-pull dyes comprising the tetracyclic polyaromatic pyrene have been designed and synthesized. The optical properties of the fifteen dyes have been examined in twenty-two solvents of different polarities. Surprisingly, contrarily to what is classically observed for push-pull dyes of D-π-A structures, a negative solvatochromism could be found for numerous dyes. The photoluminescence and thermal properties of the dyes were also examined. Theoretical calculations were carried out to support the experimental results. Full article

This research work is devoted to collecting a high-quality dataset of BODIPYs in a series of 10–30 solvents. In total, 115 individual compounds in 71 solvents are represented by 1698 arrays of the spectral and photophysical properties of the fluorophore. Each dye for a series of solvents is characterized by a calculated value of solvatochromic sensitivity according to a semiempirical approach applied to a series of solvents. The whole dataset is classified into 6 and 24 clusters of solvatochromic sensitivity, from high negative to high positive solvatochromism. The results of the analysis are visualized by the polarity mapping plots depicting, in terms of wavenumbers, the absorption versus emission, stokes shift versus − (absorption maxima + emission maxima), and quantum yield versus stokes shift. An analysis of the clusters combining several dyes in an individual series of solvents shows that dyes of a high solvatochromic sensitivity demonstrate regular behaviour of the corresponding plots suitable for polarity and viscosity mapping. The fluorophores collected in this study represent a high quality dataset of pattern dyes for analytical and bioanalytical applications. The developed tools could be applied for the analysis of the applicability domain of the fluorescent sensors. Full article

Solvatochromic dyes are utilized in various chemical and biological media as chemical sensors. Unfortunately, there is no simple way to predict the type of solvatochromism based on the structure of the dye alone, which restricts their design and synthesis. The most important family of solvatochromic sensors, pyridinium phenolate dyes, has the strongest solvatochromism. Using a natural population analysis (NPA) of the natural bond orbitals (NBO) of the phenolate group in the frontier molecular orbitals, it is possible to calculate the relative polarity of the ground state and excited state and, thus to develop a model that can predict the three types of solvatochromism observed for this family: negative, positive, and inverted. This methodology has been applied to thirteen representative examples from the literature. Our results demonstrate that the difference in the electron density of the phenolate moiety in the frontier molecular orbitals is a simple and inexpensive theoretical indicator for calculating the relative polarity of the ground and excited states of a representative library of pyridinium phenolate sensors, and thus predicting their solvatochromism. Comparing the results with the bond length alternation (BLA) and bond order alternation (BOA) indices showed that the NPA/NBO method is a better way to predict solvatochromic behavior. Full article

A series of new charge transfer (CT) chromophores of “α-diimine-M^II-catecholate” type (where M is 3d-row transition metals—Cu, Ni, Co) were derived from 4,4′-di-tert-butyl-2,2′-bipyridyl and 3,6-di-tert-butyl-o-benzoquinone (3,6-DTBQ) in accordance with three modified synthetic approaches, which provide high yields of products. A square-planar molecular structure is inherent for monomeric [Cu^II(3,6-Cat)(bipy^tBu)]∙THF (1) and Ni^II(3,6-Cat)(bipy^tBu) (2) chromophores, while dimeric complex [Co^II(3,6-Cat)(bipy^tBu)]₂∙toluene (3) units two substantially distorted heteroleptic D-M^II-A (where D, M, A are donor, metal and acceptor, respectively) parts through a donation of oxygen atoms from catecholate dianions. Chromophores 1–3 undergo an effective photoinduced intramolecular charge transfer (λ = 500–715 nm, extinction coefficient up to 10⁴ M⁻¹·cm⁻¹) with a concomitant generation of a less polar excited species, the energy of which is a finely sensitive towards solvent polarity, ensuring a pronounced negative solvatochromic effect. Special attention was paid to energetic characteristics for CT and interacting HOMO/LUMO orbitals that were explored by a synergy of UV-vis-NIR spectroscopy, cyclic voltammetry, and DFT study. The current work sheds light on the dependence of CT peculiarities on the nature of metal centers from various groups of the periodic law. Moreover, the “α-diimine-M^II-catecholate” CT chromophores on the base of “late” transition elements with differences in d-level’s electronic structure were compared for the first time. Full article

The obtainment of new luminophores for molecular sensorics of biosystems is becoming one of the urgent tasks in the field of chemical synthesis. The solution to each practical problem imposes its own limitations in the design of new structures with practically useful properties. The relationship between the structure and spectral properties is still to be unveiled. Three aza-BODIPY complexes with substituents of different natures were studied using time-resolved and steady-state fluorescence and absorption spectroscopy. The solvatochromic properties of aza-BODIPYs were studied with the use of a combined polyparametric approach and analysis by chemoinformatics methods for the first time. It was found that red shift of aza-BODIPY dyes was due to the increase of their structural lability. Predictive and experimental methods showed that the investigated aza-BODIPYs exhibited a positive solvatochromic effect, in contrast to classic BODIPYs (bearing C in the meso-position of the dipyrromethene core), which represents the negative solvatochromic properties. Spectral maxima in the area of the therapeutic window, low and predictable solvatochromism, and the ability to fine-tune the spectral characteristics make the investigated aza-BODIPYs promising scaffolds for the construction of bioengineering devices. Generalizations on the aza-BODIPYs’ design patterns were made in accordance with further bioimaging applications. Full article

Two heteroleptic Ni^II complexes combined the redox-active catecholate and 2,2′- bipyridine ligand platforms were synthesized to observe a photoinduced intramolecular ligand-to-ligand charge transfer (LL’CT, HOMO_catecholate → LUMO_α-diimine). A molecular design of compound [Ni^II(3,6-Cat)(bipy)]∙CH₃CN (1) on the base of bulky 3,6-di-tert-butyl-o-benzoquinone (3,6-DTBQ) was an annelation of the ligand with an electron donor glycol fragment, producing derivative [Ni^II(3,6-Cat^gly)(bipy)]∙CH₂Cl₂ (2), in order to influence the energy of LL’CT transition. A substantial longwave shift of the absorption peak was observed in the UV-Vis-NIR spectra of 2 compared with those in 1. In addition, the studied Ni^II derivatives demonstrated a pronounced negative solvatochromism, which was established using a broad set of solvents. The molecular geometry of both compounds can be ascribed as an insignificantly distorted square-planar type, and the π–π intermolecular stacking of the neighboring α-diimines is realized in a crystal packing. There is a lamellar crystal structure for complex 1, whereas the perpendicular T-motifs with the inter-stacks attractive π–π interactions form the packing of complex 2. The redox-active nature of ligand systems was clearly shown through the electrochemical study: a quasi-reversible one-electron reduction of 2,2′-bipyridine and two reversible successive one-electron oxidative conversations (“catecholate dianion—o-benzosemiquinonato radical anion—neutral o-benzoquinone”) were detected. Full article

Two novel, water-soluble, merocyanine fluorophores were readily prepared by microwave-assisted synthesis. Full optical characterization was performed in a series of protic and aprotic solvents, and the dyes displayed fluorescence in the red region with up to a 20-fold decrease in brightness in water, demonstrating a strong environmental sensitivity hereby termed as solvato-fluorogenicity (to distinguish from solvatochromism). Shorter fluorescent lifetimes were also measured in water, which confirmed this character. These dyes were conjugated to a modified polymyxin scaffold that allowed fluorescence “switch-on” upon binding to Gram-negative bacterial membranes, and selective fluorescence detection of bacteria in a wash-free protocol. Full article

We report here the synthesis and structural characterization of novel cationic (phenothiazinyl)vinyl-pyridinium (PVP) dyes, together with optical (absorption/emission) properties and their potential applicability as fluorescent labels. Convective heating, ultrasound irradiation and mechanochemical synthesis were considered as alternative synthetic methodologies proficient for overcoming drawbacks such as long reaction time, nonsatisfactory yields or solvent requirements in the synthesis of novel dye (E)-1-(3-chloropropyl)-4-(2-(10-methyl-10H-phenothiazin-3-yl)vinyl)pyridin-1-ium bromide 3d and its N-alkyl-2-methylpyridinium precursor 1c. The trans geometry of the newly synthesized (E)-4-(2-(7-bromo-10-ethyl-10H-phenothiazin-3-yl)vinyl)-1-methylpyridin-1-ium iodide 3b and (E)-1-methyl-4-(2-(10-methyl-10H-phenothiazin-3-yl)vinyl)pyridin-1-ium tetrafluoroborate 3a′ was confirmed by single crystal X-ray diffraction. A negative solvatochromism of the dyes in polar solvents was highlighted by UV-Vis spectroscopy and explanatory insights were supported by molecular modeling which suggested a better stabilization of the lowest unoccupied molecular orbitals (LUMO). The photostability of the dye 3b was investigated by irradiation at 365 nm in different solvents, while the steady-state and time-resolved fluorescence properties of dye 3b and 3a′ in solid state were evaluated under one-photon excitation at 485 nm. The in vitro cytotoxicity of the new PVP dyes on B16-F10 melanoma cells was evaluated by WST-1 assay, while their intracellular localization was assessed by epi-fluorescence conventional microscopy imaging as well as one- and two-photon excited confocal fluorescence lifetime imaging microscopy (FLIM). PVP dyes displayed low cytotoxicity, good internalization inside melanoma cells and intense fluorescence emission inside the B16-F10 murine melanoma cells, making them suitable staining agents for imaging applications. Full article