Search Results (48)

This study evaluates the swelling potential in clayey soils of the Paleogene Brebi, Mera, and Moigrad formations in the Transylvanian Basin (Romania) by integrating direct free-swelling tests (FS; STAS 1913/12-88) with indirect index-property diagrams and semi-quantitative X-ray diffraction (XRD; RIR method). The indirect analysis combines three swelling-susceptibility classification charts—Seed et al. (AI–clay), Van der Merwe (PI–clay), and Dakshanamurthy and Raman (LL–PI)—with mineralogical trends from the Casagrande plasticity chart, complemented by Holtz and Kovacs’s clay-mineral reference fields and Skempton’s activity concept (AI = PI/% < 2 µm). The geotechnical dataset comprises 88 Brebi, 46 Mera, and 263 Moigrad specimens (with parameter counts varying by test), an XRD was performed on a representative subset. The free swell (FS) results indicate that Brebi soils range from low to active behavior (50–135%) without reaching the very active class; most Brebi specimens fall in the medium-activity range. Moigrad spans the full FS spectrum (20–190%) but is predominantly in the medium-to-active range. In contrast, Mera soils exhibit predominantly active behavior, covering the full range of activity classes (30–170%). The empirical classification charts diverge systematically: clay-sensitive schemes tend to assign higher swell susceptibility than the LL–PI approach, especially in carbonate-influenced soils. XRD results corroborate these patterns: Brebi is calcite-rich (mean ≈ 53.5 wt% CaCO₃) with minor expandable minerals (mean ≈ 3.1 wt%); Mera is feldspathic (orthoclase mean ≈ 55.3 wt%) with variable expandable phases; and Moigrad has a higher clay-mineral content (mean ≈ 38.8 wt%). Overall, swelling is controlled by the combined effects of clay-fraction reactivity, clay volume continuity, and carbonate-related microstructural constraints. Full article

Samples of flotation tailings generated during the exploitation and processing of Zn–Pb–Cu–Ag ore from the Rudnik mine (Serbia) were investigated for their mineralogical, geochemical, and magnetic susceptibility properties. The flotation tailings consist of a complex mineral assemblage, including silicates, carbonates, sulfides, phosphates, sulfates, oxides, hydroxides, and native elements. Quartz, calcite, and orthoclase dominate the coarse fraction (>400 µm), accompanied by epidote, Ca-garnet, and Ca-clinopyroxene. Sulfide minerals are concentrated in finer fractions (<400 µm), with pyrite and arsenopyrite being the most abundant, followed by pyrrhotite, sphalerite, galena, and chalcopyrite. These sulfides occur as dispersed grains within a silicate–carbonate matrix. Post-depositional oxidative alteration is moderately developed, with pyrite replaced by hematite, galena by cerussite, and chalcopyrite by malachite. Geochemical analyses reveal that SiO₂ (avg. 38.98 wt%), Fe₂O₃ (avg. 23.68 wt%), Al₂O₃ (avg. 8.95 wt%), CaO (avg. 9.03 wt%) and MgO (avg. 1.50 wt%) dominate the composition. Economically significant metals include Zn (avg. 0.47 wt%), Pb (avg. 0.20 wt%), Cu (avg. 0.11 wt%), Ag (max. 19 µg/g), and Bi (max. 130 µg/g). Mass magnetic susceptibility shows a strong correlation with S (r = 0.92), Co (r = 0.90), and Bi (r = 0.87); moderate correlation with Fe₂O₃, Al₂O₃, and As; and negative correlation with Mn, TiO₂, Zn, and Pb. The ferromagnetic phase most likely originates from pyrrhotite, as well as hematite formed during pyrite alteration and goethite. Full article

Slates transform from shales at relatively low-grade metamorphic conditions. They often reveal highly anisotropic microstructures and very strong crystal alignment that must be considered in seismic modeling and engineering construction. In this paper, we investigate nine slate samples from four regions in northern China: Fangshan, Beijing; Xushui, Hebei; Damao Qi, Inner Mongolia; and Zhengxiangbai Qi, Inner Mongolia. The microstructural characteristics were analyzed with scanning electron microscopy and explored with digital crystal size distribution analysis. Preferred crystal orientation characteristics of slate minerals were investigated with high-energy synchrotron X-ray diffraction and subsequent Rietveld refinement. This research shows that the main components of slates in this study are quartz, muscovite, chlorite, and minor orthoclase. In terms of morphology, muscovite, chlorite, and quartz are strongly elongated and oriented. The crystallographic orientation of sheet silicates is very strong, exceeding 100 multiples of random distribution for chlorite from Fangshan. However, quartz with a preferred strong shape orientation has a crystallographic preferred orientation close to random. The preferred orientation characteristics of minerals serve as a basis for calculating elastic properties and anisotropies of the Chinese slate samples that contribute significantly to seismic anisotropy documented in northern China. Full article

This article presents the results of fractal texture analyses of selected minerals (aegirine, eudialyte, orthoclase) in the northwestern part of the Lovozero intrusion. This intrusion is located in northeastern Scandinavia and is a massif made of alkaline rocks. There are rocks such as massive syenites and porphyrtes, as well as iiolites, urtites, and foyaites, accompanied by metasomatic rocks of the contact zone. A box-counting fractal dimension was used to numerically represent the texture of these minerals. In the further part, this coefficient was visualized in the form of maps superimposed on the study area, and some simple arithmetic calculations were performed to highlight the common features of this dimension for the selected rock-forming minerals. In conjunction with the geological interpretation of these results, rock-forming processes in this massif were depicted. This work is preliminary, showing the potential of this calculation method in petrological applications. Full article

Recently, a variety of nephrite containing localized pink mineral aggregates has emerged on the market, which is sometimes referred to as “peach blossom jade” by some merchants. Currently, there is limited research on this type of nephrite containing pink minerals, and its detailed mineral composition characteristics and coloration mechanisms remain unclear. In this study, four samples of nephrite containing pink minerals were systematically investigated using conventional gemological tests, as well as modern analytical techniques such as X-ray powder diffraction (XRD), infrared spectroscopy (IR), laser Raman spectroscopy, ultraviolet–visible (UV-Vis) absorption spectroscopy, electron probe microanalysis (EPMA), and X-ray fluorescence spectroscopy (XRF). These techniques were employed to elucidate the mineral composition, chemical composition, spectroscopic features, and coloration origins of the samples. The results indicate that the primary mineral constituent of the samples is tremolite, with accessory minerals including zoisite, muscovite, orthoclase, andesine, diopside, and prehnite. The major chemical components of the samples are SiO₂, CaO, and MgO, along with minor amounts of Al₂O₃, K₂O, and FeO_T. The overall green hue of the samples is positively correlated with Fe content. The pink mineral present in the samples is predominantly Mn-bearing zoisite, and the pink coloration of zoisite is primarily attributed to the energy level transitions of Mn²⁺ at approximately 540 nm and 440 nm. Full article

The initial nucleus of gemstones at the Natural History Museum of the University of Florence (Italy) is linked to the significant collection of the Medici family, who began it as early as the 15th century. The present research aims to study this collection in order to (1) comprehensively review the archival and catalogue information available; (2) identify the mineralogical species correctly; and (3) gather information on the potential provenance of the gem deposits. To address these objectives, fifty gems were investigated using entirely non-invasive methods, ensuring the preservation of the collection’s precious and historical value. All specimens underwent autoptic observation and micro-Raman analysis, while a selection was further examined using PIXE-PIGE to characterise their chemical composition, including trace elements. The gems were attributed to seven mineral species: emerald, topaz, grossular, cordierite, quartz, orthoclase, and tourmaline. One gem was identified as a fake, made of glass and likely produced in the 17th century. Twenty-nine of the historical attributions in the catalogue were found to be incorrect and were subsequently revised. In some cases, the trace elements and mineral inclusions identified in the gems enabled the determination of potential provenance deposits, which were then compared with the available archival information. Full article

We tested a scanning electron microscope equipped with the newly developed Unity-BEX detector (SEM-BEX) system to study thirty-nine samples of the testate amoeba Difflugia. This produces fast single-scan backscattered (BSE) and combined elemental X-ray maps of selected areas, resulting in high-resolution data-rich composite colour X-ray and combined BSE maps. Using a suitably user-defined elemental X-ray colour palette, minerals such as orthoclase, albite, quartz and mica were highlighted in blue, purple, magenta and green, respectively. Imaging was faster than comparable standard energy dispersive X-ray (EDX) analysis, of high quality, and did not suffer from problems associated with the analysis of rough surfaces by EDX, such as shadowing effects or working distance versus X-ray yield artifacts. In addition, we utilised the AZtecMatch v.6.1 software package to test its utility in identifying the mineral phases present on the Difflugia tests. Significantly, it was able to identify many minerals present but would require some further development due to the small size/thinness of many of the minerals analysed. The latter would also be further improved by the development of a bespoke mineral library based on actual collected X-ray data rather than based simply on stoichiometry. The investigation illustrates that in the case of the current material, minerals are preferentially selected and arranged on the test based upon their mineralogy and size, and likely upon inherent properties such as structural strength/flexibility and specific gravity. As with previous studies, mineral usage is ultimately controlled by source availability and therefore may be of limited taxonomic significance, although of value in areas such as palaeoenvironmental reconstruction. Full article

Characterization of pore structure and heterogeneity is crucial for exploring and evaluating shale oil and gas resources. Existing methodologies exhibit various limitations, and intuitive, quantitative description techniques are lacking. To address these issues, shales from the second member of the Funing Formation (E₁f₂) in the Subei Basin were studied in this study. A comprehensive research methodology was employed that combined petrological analysis, physical structure testing, and SEM images supplemented with multifractal analysis and partial least squares regression (PLSR) data processing to achieve nuanced qualitative and quantitative characterization of the heterogeneity in lacustrine shale pore structures. This study revealed that E₁f₂ shale pores predominantly consist of mesopores (2–50 nm) and macropores (>50 nm). A positive correlation was observed between the development of mesopores and calcite content, while a negative correlation exists with orthoclase content. Conversely, a positive correlation with plagioclase content was found in macropore development. The growth in total pore volume is inhibited by the total organic carbon (TOC) content. Employing multifractal methods to analyze pore morphology data extracted from scanning electron microscopy (SEM) images facilitated a quantitative characterization of the heterogeneity within the pore structures. The results showed that organic-medium mixed shale (OMMS) has the strongest heterogeneity. The weakest heterogeneity is exhibited by the organic-medium calcareous shale (OMCS). PLSR analysis indicates that the structural heterogeneity of the E₁f₂ shales is positively correlated with TOC content and negatively correlated with orthoclase content. Additionally, the type of pore influences the degree of heterogeneity. Increasing the total and macropore volume reduces the heterogeneity, while increasing the micropore (<2 nm) volume enhances it in the E₁f₂ shales. Full article

This study aimed to uncover the chronology and production technologies of ancient bricks unearthed from various locations in Upper Assam, Northeast India. To achieve this goal, complementary spectroscopic techniques such as Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD), Scanning Electron Microscope (SEM) coupled with Energy Dispersive Spectrometer (EDS), as well as Thermoluminescence (TL) and Optically Stimulated Luminescence (OSL/IRSL) dating, were applied. FTIR and XRD analyses revealed the presence of quartz, feldspar (microcline, orthoclase, albite), kaolinite, chlorite, cerussite, palygorskite, magnetite, hematite, and organic carbon. The mineralogical composition indicates two distinct groups with firing temperatures below 650 °C and above ~800 °C. These two groups could be the first indication of the presence of two civilizations or at least two different production technologies involving different firing temperatures and kiln atmospheric conditions. Further, the SEM-EDS study suggests that both calcareous and non-calcareous clays were used in brick making, which have low and high refractory properties, respectively. The internal morphology of the samples shows the existence of micropores and microfractures, indicating the influence of higher-temperature firing. Absolute dating techniques associate the two brick groups with different age ranges: a firing temperature above ~800 °C indicates a superior technology corresponding to a production period between the 7th and 10th centuries CE. In contrast, a temperature below 650 °C indicates a technologically less advanced group of people, with the age group dated between the 11th and 14th centuries CE. Full article

Selenium (Se) is an essential trace element for humans and animals, and an excess of or deficiency in Se is harmful to health. Research on the selenium enrichment zone began in the late 1970s in Shuang’an, Ziyang, southern Shaanxi Province. Naore village is only one selenosis area in Shuang’an, Ziyang, China. Different scholars have conducted systematic studies on the occurrence of selenium, its organic geochemistry and biomarkers, and its content and enrichment patterns in this area. This study applied the TIMA (TESCAN integrated mineral analyzer) for the first time to conduct detailed mineralogical work. The minerals included quartz, carbonate minerals (calcite and dolomite), feldspar (plagioclase, albite, and orthoclase), biotite and muscovite, clay minerals (chlorite and kaolinite), hematite, pyrite, and accessory minerals (almandine, olivine, zircon, and apatite) in Naore village, Ziyang, Shaanxi Province. The ATi index (100 × apatite/(apatite + tourmaline)) is used to determine the source of heavy minerals and the degree of heavy minerals’ weathering. The content POS (100 × (pyroxene + olivine + spinel)/transparent heavy mineral) of olivine, pyroxene, and spinel in heavy minerals can reflect the contribution of basic and ultrabasic rocks in the source area. The ATi and POS indexes for the heavy minerals in the research area were 91.83~99.96 and 0.01~18.75, respectively, reflecting the abundance of volcanic rock material in their source. In addition, the migration, transformation, bioavailability, and toxicity of selenium in the environment are closely related to its species. The species of selenium in various selenium-rich areas (Naore, Wamiao, and Guanquan) mainly include unusable residues and organic forms, followed by humic-acid-bound selenium. The proportions of water-soluble, exchangeable, and carbonate-bound selenium are relatively small, and the proportion of Fe-Mn oxide-bound selenium is the lowest. Full article

The Neoproterozoic Bure adakitic rock in the western Ethiopia shield is a newly discovered magmatic rock type. However, the physicochemical conditions during its formation, and its source characteristics are still not clear, restricting a full understanding of its petrogenesis and geodynamic evolution. In this study, in order to shed light on the physicochemical conditions during rock formation and provide further constraints on the petrogenesis of the Bure adakitic rock, we conduct electron microprobe analysis on K-feldspar, plagioclase, and biotite. Additionally, we investigate the trace elements and Hf isotopes of zircon, and the Sr-Nd isotopes of the whole rock. The results show that the K-feldspar is orthoclase (Or = 89.08~96.37), the plagioclase is oligoclase (Ab = 74.63~85.99), and the biotite is magnesio-biotite. Based on the biotite analysis results, we calculate that the pressure during rock formation was 1.75~2.81 kbar (average value of 2.09 kbar), representing a depth of approximately 6.39~10.2 km (average value of 7.60 km). The zircon thermometer yields a crystallization temperature of 659~814 °C. Most of the (Ce/Ce*)_D values in the zircons plotted above the Ni-NiO oxygen buffer pair, and the calculated magmatic oxygen fugacity (logfO₂) values vary from −18.5 to −4.9, revealing a relatively high magma oxygen fugacity. The uniform contents of FeO, MgO, and K₂O in the biotite suggest a crustal magma source for the Bure adakitic rock. The relatively low (⁸⁷Sr/⁸⁶Sr)_i values of 0.70088 to 0.70275, positive ε_Nd(t) values of 3.26 to 7.28, together with the positive ε_Hf(t) values of 7.64~12.99, suggest that the magma was sourced from a Neoproterozoic juvenile crust, with no discernable involvement of a pre-Neoproterozoic continental crust, which is coeval with early magmatic stages in the Arabian Nubian Shield elsewhere. Additionally, the mean Nd model ages demonstrate an increasing trend from the northern parts (Egypt, Sudan, Afif terrane of Arabia, and Eritrea and northern Ethiopia; 0.87 Ga) to the central parts (Western Ethiopia shield; 1.03 Ga) and southern parts (Southern Ethiopia Shield, 1.13 Ga; Kenya, 1.2 Ga) of the East African Orogen, which indicate an increasing contribution of pre-Pan-African crust towards the southern part of the East African Orogen. Based on the negative correlation between MgO and Al₂O₃ in the biotite, together with the Lu/Hf-Y and Yb-Y results of the zircon, we infer that the Bure adakitic rock was formed in an arc–arc collision orogenic environment. Combining this inference with the whole rock geochemistry and U-Pb age of the Bure adakitic rock, we further propose that the rock is the product of thickened juvenile crust melting triggered by the Neoproterozoic Pan-African Orogeny. Full article

Geochemical indices used to identify the emerging anomalies of potentially harmful elements in topsoil depend on background values (BVs). For urban sites, it is reasonable to estimate native BVs through the targeted selection of peri-urban sampling sites or by distinguishing a useful background subset (BS) within the peri-urban dataset. Here, the goals were to examine the influence of Quaternary deposits on various types of topsoil variables, identify the variables most helpful for cluster analysis intended for the choice of background subset (BS), and compare background values (BVs) based on different background subsets. Composite topsoil samples from a peri-urban area were used for the determination of the following variables: contents of 26 elements and components of the bulk mineralogical composition, as well as the sand, silt, and clay fractions and loss-on-ignition (LOI) at 550 °C and at 950 °C. Although Quaternary lithology influences topsoil elemental contents or granulometric fractions, percentages of illite, kaolinite, orthoclase, quartz, albite, dolomite, and LOI at 550 °C, the choice of BS, according to it, is not recommended, as BVs based on topsoil texture are superior. However, cluster analysis using topsoil fractions < 2, <63, and >63 μm or the contents of Al, Fe, K, Ti, Ga, Nb, Rb, and Si are preferable. It is recommended to use these reference variables for the selection of BS. Full article

Ambitle in the Feni Island Group is located within the NW trending Tabar–Lihir–Tanga–Feni (TLTF) volcanic island chain, Melanesian Arc, northeastern Papua New Guinea. The TLTF chain is renowned for its alkaline magmatism, geothermal activity, copper–gold mineralization, and world-class gold mining. Although its geochemical patterns indicate island arc signatures (i.e., high LILE and depleted HFSE), TLTF volcanism is not directly related to the older Melanesian Arc subduction system. However, it may have been influenced by source mantle metasomatism linked to the older subduction. The purpose of this study is to (1) present and interpret the petrographic, mineralogical, and geochemical data from Feni within the context of the tectonic evolution of the TLTF and (2) propose a geodynamic, petrogenetic model for the Feni volcanic rocks. The key methodologies used in this study are field mapping and sampling, petrographic analysis using the optical microscope, whole-rock geochemical analysis via XRF and ICP MS, and mineralogical analysis using an electron microprobe. The main rock types sampled in this study include feldspathoid-bearing basalt, trachybasalt, phonotephrite, trachyandesite, and trachydacite. Minerals identified include forsteritic olivine, diopside, augite, labradorite, andesine, anorthitic plagioclase, nepheline, and leucite in the primitive mafic suites, whereas the more evolved intermediate and felsic hypabyssal suites contain amphibole, albite, orthoclase, biotite, and either rare quartz or feldspathoids. Amphibole composition is primarily magnesiohastingsite with minor pargasite formed under polybaric conditions. Accessory minerals include apatite, titanite, and Ti-magnetite. We propose that limestone assimilation followed by fractional crystallization are plausible dominant processes in the geochemical evolution of the Ambitle volcanics. Clinopyroxene fractionation is dominant in the mafic volcanics whereas hornblende fractionation is a major petrologic process within the intermediate suites proven by the enrichment of LREE and depletions in MREE and HREE. Feni magmas are also highly enriched in REEs relative to neighboring arcs. This study is globally significant as alkaline magmas are important sources of Cu, Au, and REE as critical elements for green energy and modern technology. Full article

Lithomargic clay is generally found below the lateritic soil along the coastal belt of Karnataka. It is rich in silt content and dispersive in nature. This type of soil is liable to erosion and landslides. The lithomargic clay is largely found in the western coast of South India. At present, coastal belt of Udupi district is witnessing a lot of developments in terms of industry, infrastructures, and other activities. Lithomargic clay is a type of problematic soil, which needs a thorough study to make it suitable to sustain any engineering structure such as buildings, pavements, railways, dams. A characterization and mineralogical study is conducted to identify the presence of minerals and compounds for the various soil samples collected along the coastal belt of Udupi regions using X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS), and scanning electron microscopy (SEM) analysis. The primary minerals observed in majority of the regions are quartz, feldspar such as orthoclase, muscovite, and the secondary minerals formed by the decomposition and chemical alteration of primary minerals include sheet minerals such as kaolinite, halloysite, dickite, gibbsite, and illite in high proportions. The study also shows the presence of iron compounds such as fayalite, goethite, and siderite. The majority of the elements observed are oxygen, silicates, aluminum, potassium, and iron which confirms the presence of the compounds identified through XRD analysis. Full article

The purpose of this work was to investigate the effect of the burning environment on the properties and phase composition of clinker-based ceramic specimens made from loam with diatomite and bentonite clay in order to develop technological parameters for the manufacture of clinker products. The main raw material used for the experiments was local fusible loam from the Almaty deposit, which is the basis for the production of 75 and 100 grade ceramic bricks. Diatomite from Utesai deposit (Aktobe region) and highly plastic bentonite clay from Darbazin deposit (Turkestan region) were used as additives. Loam and bentonite clay were applied after grinding and sieving through a 1 mm sieve. Diatomite was applied after grinding and milling until it had completely passed through a 0.315 mm sieve. The raw materials are mixed after dosing, and then water is added in the amount required until a pliable mass is obtained. To investigate the properties of the products, standard cylinder samples were prepared with a diameter of 50 mm and a height of 50 mm. The cylinder samples were pressed on a hydraulic press at a pressure of 2–4 kN. The samples were dried in a desiccator at 95–100 °C for 2 h. After drying, the products were burning in a muffle kiln. The analysis of the properties of the burned products showed that the optimum ratio in the ceramic mixture of loam and diatomite to loam and bentonite clay is 85%:15%. After burning in a slightly oxidising environment at 1170 °C, the ceramic specimens correspond to Class 2 for the medium-density and compressive strength grades M 400 and M 500 (GOST 530-2012 (Government standard). X-ray diffractometric analysis showed that the products contain augite, quartz and anorthite as crystalline phases, with the former predominating. After burning in a reducing atmosphere, at 1170 °C, the properties of the samples have higher values compared to the samples burning in a weakly oxidising atmosphere. The resulting properties, according to the regulations, are characteristic of clinker bricks (DIN V 105-1 (technical requirements for clinker façade bricks). After burning in a reducing environment, the phase composition of the products changes qualitatively; in addition to augite and quartz, albite, diopside, orthoclase and haematite are present in the samples. Full article