Search Results (158)

Despite intense interest in the catalytic potential of transition metal oxide heterostructures, originating from their large surface area and tunable chemistry, the fabrication of well-defined multicomponent oxide coatings with controlled architectures remains challenging. Here, we demonstrate a simple and effective swelling-assisted sequential infiltration synthesis (SIS) strategy to fabricate hierarchically porous multicomponent metal-oxide electrocatalysts with tunable bimetallic composition. A combination of solution-based infiltration (SBI) of transition metals, iron (Fe), nickel (Ni), and cobalt (Co), into a block copolymer (PS73-b-P4VP28) template, followed by vapor-phase infiltration of alumina using sequential infiltration synthesis (SIS), was employed to synthesize porous, robust, conformal and transparent multicomponent metal-oxide coatings like Fe/AlO_x, Fe+Ni/AlO_x, and Fe+Co/AlO_x. Electrochemical assessments for the oxygen evolution reaction (OER) in a 0.1 M KOH electrolyte demonstrated that the Fe+Ni/AlO_x composite exhibited markedly superior catalytic activity, achieving an impressive onset potential of 1.41 V and a peak current density of 3.29 mA/cm². This superior activity reflects the well-known synergistic effect of alloying transition metals with a trace of Fe, which facilitates OER kinetics. Overall, our approach offers a versatile and scalable path towards the design of stable and efficient catalysts with tunable nanostructures, opening new possibilities for a wide range of electrochemical energy applications. Full article

Hydroxyl radicals (·OH) offer exceptional potential for cancer treatment through reactive oxygen species (ROS) amplification and apoptotic induction. However, conventional Fe-based metal–organic framework (Fe-MOF) nanomaterials are limited by inadequate Fe²⁺ concentrations, resulting in suboptimal Fenton catalytic performance. This study presents concave octahedral Fe-MOF nanomaterials with integrated bimetallic Fe/Zn centers through controlled solvothermal synthesis. The nanoplatform exhibits high specific surface area (559 m²/g) and 5-fluorouracil (5-FU) loading efficiency (58.7%). These structural properties establish it as a potential nanobuilding block for constructing stimuli-responsive gels. With optimized Fe²⁺ content (57.3%), the Fe-MOF material shows enhanced nanozyme-like activity (V_max = 4.58 × 10⁻⁷ M/s, K_cat = 1.83 × 10⁻³ s⁻¹) for H₂O₂-mediated ·OH generation. The Fe-MOF@FU demonstrates pH-responsive drug release (76.5% at pH 5.0) and glutathione (GSH) depletion, synergistically enhancing oxidative stress. Biocompatibility studies confirm safety, while in vitro investigations show remarkable anticancer activity against 4T1 cells with 17.8% viability, supporting its dual role as an independent therapeutic agent and a functional component for future gel-based delivery systems. Full article

Strip mining creates widespread degraded landscapes that have low soil pH, high bulk density, impacted hydrologic processes, and an accumulation of heavy metals that limit revegetation efforts. To improve soil conditions and restoration success, soil amendments paired with native trees provide a potential solution. However, limited empirical studies have been conducted on the success of soil amendments to facilitate shortleaf pine (Pinus echinata Mill.) growth in the southeastern US. To fill this knowledge gap, a field trial was established on a reclaimed coal-mined site. Shortleaf pine seedlings were planted in a complete randomized block design with two soil amendment treatments: activated carbon and mycorrhizal inoculation, applied at a rate of 3.36 g/m² and 42.5 g per tree, respectively. Soil treatment did not impact tree survival which concluded with a 69 ± 3% (mean ± standard error) survival rate. Activated carbon increased soil electrical conductivity (p = 0.037) and the mycorrhizal amendment led to increased soil Ca content (p = 0.004). After the first growing season, trees in the mycorrhizal-amended soil were 12% shorter (p = 0.016) than trees in the activated carbon treatment. While soil amendment resulted in minimal improvements to soil parameters, shortleaf pine was found to be an effective species choice for post-mined site reforestation. Full article

In this work, we report a green synthesis of zinc oxide (ZnO) nanoparticles using aqueous and ethanolic extracts of Tradescantia spathacea (purple maguey) as bioreducing and stabilizing agents, which are plant extracts not previously employed for metal oxide nanoparticle synthesis. This method provides an efficient, eco-friendly, and reproducible route to obtain ZnO nanoparticles, while minimizing environmental impact compared to conventional chemical approaches. The extracts were prepared following a standardized protocol, and their phytochemical profiles, including total phenolics, flavonoids, and antioxidant capacity, were quantified via UV-Vis spectroscopy to confirm their reducing potential. ZnO nanoparticles were synthesized using zinc acetate dihydrate as a precursor, with variations in pH and precursor concentration in both aqueous and ethanolic media. UV-Vis spectroscopy confirmed nanoparticle formation, while X-ray diffraction (XRD) revealed a hexagonal wurtzite structure with preferential (101) orientation and lattice parameters a = b = 3.244 Å, c = 5.197 Å. Scanning electron microscopy (SEM) showed agglomerated morphologies, and Fourier transform infrared spectroscopy (FTIR) confirmed the presence of phytochemicals such as quercetin, kaempferol, saponins, and terpenes, along with Zn–O bonding, indicating surface functionalization. Zeta potential measurements showed improved dispersion under alkaline conditions, particularly with ethanolic extracts. This study presents a sustainable synthesis strategy with tunable parameters, highlighting the critical influence of precursor concentration and solvent environment on ZnO nanoparticle formation. Notably, aqueous extracts promote ZnO synthesis at low precursor concentrations, while alkaline conditions are essential when using ethanolic extracts. Compared to other green synthesis methods, this strategy offers control and reproducibility and employs a non-toxic, underexplored plant source rich in phytochemicals, potentially enhancing the crystallinity, surface functionality, and application potential of the resulting ZnO nanoparticles. These materials show promise for applications in photocatalysis, in antimicrobial coatings, in UV-blocking formulations, and as functional additives in optoelectronic and environmental remediation technologies. Full article

By embedding an aluminum-laminated layer within La₂O₃ thin films and subjecting them to high-temperature rapid thermal annealing, a La₂O₃/LaAl_xO_y/La₂O₃ sandwich dielectric was formed. This structure enhances the interface properties with both the silicon substrate and the metal gate electrode, improving current conduction. Comprehensive analysis using X-ray Photoelectron Spectroscopy (XPS) revealed that this novel process not only facilitates the formation of a high-quality lanthanum aluminate layer, as indicated with Al 2p peak at 74.5 eV, but also effectively suppresses silicate layer growth, as supported by the weak Si-O signal from both the Si 2s (153.9 eV) and O 1s (533 eV) peaks at the dielectric/Si interface in the Al-laminated samples. Fourier Transform Infrared (FTIR) spectroscopy revealed a significant reduction in the OH absorption peak at 3608 cm⁻¹ OH-related band centered at 3433 cm⁻¹. These improvements are attributed to the aluminum-laminated layer, which blocks oxygen and hydroxyl diffusion, the LaAl_xO_y layer scavenging interface silicon oxide, and the consumption of oxygen during LaAl_xO_y formation under thermal annealing. Electrical measurements confirmed that the dielectric films exhibited significantly lower interface and oxide trap densities compared to native La₂O₃ samples. This approach provides a promising method for fabricating high-quality lanthanum-based gate dielectric films with controlled dielectric/substrate interactions, making it suitable for nano-CMOS and memristive device applications. Full article

The bioavailability of heavy metals is profoundly influenced by their interactions with active soil components (microorganisms, organic matter, and iron minerals). However, the effects of urease-producing bacteria combined with organo-Fe hydroxide coprecipitates (OFCs) on Cd accumulation in wheat, as well as the mechanisms underlying these effects, remain unclear. In this study, pot experiments integrated with high-throughput sequencing were employed to investigate the impacts of the urease-producing bacterial strain TJ6, ferrihydrite (Fh), and OFCs on Cd enrichment in wheat grains, alongside the underlying soil–microbial mechanisms. The results demonstrate that the strain TJ6-Fh/OFC consortium significantly (p < 0.05) reduced (50.1–66.7%) the bioavailable Cd content in rhizosphere soil while increasing residual Cd fractions, thereby decreasing (77.4%) Cd accumulation in grains. The combined amendments elevated rhizosphere pH (7.35), iron oxide content, and electrical conductivity while reducing (14.5–21.1%) dissolved organic carbon levels. These changes enhanced soil-colloid-mediated Cd immobilization and reduced Cd mobility. Notably, the NH₄⁺ content and NH₄⁺/NO₃⁻ ratio were significantly (p < 0.05) increased, attributed to the ureolytic activity of TJ6, which concurrently alkalinized the soil and inhibited Cd uptake via competitive ion channel interactions. Furthermore, the relative abundance of functional bacterial taxa (Proteobacteria, Gemmatimonadota, Enterobacter, Rhodanobacter, Massilia, Nocardioides, and Arthrobacter) was markedly increased in the rhizosphere soil. These microbes exhibited enhanced abilities to produce extracellular polymeric substances, induce phosphate precipitation, facilitate biosorption, and promote nutrient (C/N) cycling, synergizing with the amendments to immobilize Cd. This study for the first time analyzed the effect and soil science mechanism of urease-producing bacteria combined with OFCs in blocking wheat’s absorption of Cd. Moreover, this study provides foundational insights and a practical framework for the remediation of Cd-contaminated wheat fields through microbial–organic–mineral collaborative strategies. Full article

Recently, the emerging class of hydroxamate-based metal–organic frameworks (MOFs) has demonstrated significant structural diversity and chemical robustness, both essential for potential applications. Combining the favorable hard–hard Bi-O interactions and chelating chemistry of hydroxamate groups, a rigid and symmetrical three-dimensional bismuth-hydroxamate metal–organic framework was successfully prepared via solvothermal synthesis and structurally elucidated via X-ray crystallography. The MOF, namely SUM-91 (SUM = Sichuan University Materials), features one-dimensional Bi-oxo secondary building blocks (SBUs), which are bridged by chelating 1,4-benzenedihydroxamate linkers. With the demonstrated permanent porosity and molecular sieving effect (CO₂ vs. N₂), SUM-91 was also found to be stable under harsh chemical conditions (aqueous solutions with pH = 2–12 and various organic solvents). As the structural robustness of SUM-91 could be attributed to the finetuning of the coordinative sphere of Bi centers, this work shed light on the further development of (ultra-)microporous materials with high stability and selective adsorption properties. Full article

During the cold metal transfer plus pulse (CMT+P) welding process of medium-thick plates, problems such as incomplete penetration (IP) and burn-through (BT) are prone to occur, and weld pool morphology is important information reflecting the penetration states. In order to acquire high-quality weld pool images under complex welding conditions, such as smoke and arc light, a welding monitoring system was designed. For the purpose of predicting weld penetration states, the improved Inception-ResNet prediction model was proposed. Squeeze-and-Excitation (SE) block was added after each Inception-ResNet block to further extract key feature information from weld pool images, increasing the weight of key features beneficial for predicting the penetration states. The model has been trained, validated, and tested. The results demonstrate that the improved model has an accuracy of over 96% in predicting penetration states of aluminum alloy medium-thick plates compared to the original model. The model was applied in welding experiments and achieved an accurate prediction. Full article

UiO-66-NH₂ is a metal–organic framework (MOF) with open metal sites, making it a promising candidate for adsorption and catalysis. However, the powdery texture of MOFs and the use of toxic solvents during synthesis limit their application. A novel solution to this issue is to create a layered porous composite by encasing the MOF within a flexible and structurally robust aerogel substrate using safe, eco-friendly, and green solvents such as ethanol. The fibrous MOF aerogels, characterized by a desirable macroscopic shape of cylindrical block and hierarchical porosity, were synthesized by two approaches: in situ growth of amine-functionalized UiO-66-NH₂ crystals on a TEMPO-oxidized cellulose nanofiber (TOCNF) and ex situ crosslinking of UiO-66-NH₂ crystals onto a TOCNF network to form UiO-66-NH₂/TOCNF. The incorporation of MOF into the cellulose nanofibrils via the in situ method reduces their aggregation potential, alters the nucleation/growth balance to produce smaller MOF crystals, and enhances mechanical flexibility, as evidenced by SEM images. The three adsorbents, including UiO-66-NH₂, ex situ UiO-66-NH₂/TOCNF, and in situ UiO-66-NH₂/TOCNF, were synthesized and used in this study. The effects of pH, time, temperature, and initial concentration were studied. A maximum adsorption capacity (Qmax) of 549.45 mg/g for Congo Red (CR) and 171.23 mg/g for Orange II (ORII) was observed at pH 6, using 10 mg of in situ UiO-66-NH₂/TOCNF at 40 °C with a contact time of 75 min for CR and 2 h for ORII. The adsorption of both dyes primarily occurs through monolayer chemisorption on the in situ UiO-66-NH₂/TOCNF. The main removal mechanisms were hydrogen bonding and surface complexation. The noteworthy adsorption capacity of in situ UiO-66-NH₂/TOCNF coupled with environment-friendly fabrication techniques indicates its potential applications on a large scale in real wastewater systems. Full article

This study investigates the effectiveness of organic compost as a sustainable alternative to chemical fertilizers for improving soil health and enhancing crop productivity under greenhouse conditions. The experiment focused on sweet basil (Ocimum basilicum L.), an aromatic herb highly sensitive to soil fertility and structure, cultivated in sandy loam soil—a prevalent substrate in arid and semi-arid regions, often limited by poor water and nutrient retention. Using a randomized complete block design with six compost application rates, this study evaluated the physicochemical, biochemical, and agronomic responses of both soil and plants. The results demonstrated significant improvements across all parameters (p < 0.05), with the 30 t/ha compost treatment yielding the most notable enhancements in soil structure, nutrient content, and plant performance while maintaining acceptable levels of heavy metals. Soil organic matter (SOM) increased to 13.71%, while shoot length (SL), essential oil content (EOC), and the 100-seed weight improved to 42 cm, 0.83%, and 0.32 g, respectively, compared to the control. These finding underscore the benefits of high compost application rates in boosting greenhouse horticultural productivity while promoting sustainable agriculture. Moreover, this study supports the reduction in chemical fertilizer dependency and encourages the adoption of circular economy principles (CEPs) through organic waste recycling. Full article

Soil phosphorus is heavily restricted by soil acidification and salinization. There is a need to determine a biological solution for this issue to replace the overuse of chemical phosphorus fertilizer that aggravates adverse conditions, such as salinity, acidity, and metallic toxicity. Therefore, this study aimed at determining the phosphorus dynamics in terms of the soil, growth, and yield of rice under the supplementation of phosphate (P)-solubilizing purple nonsulfur bacteria (PNSB), Cereibacter sphaeroides ST16 and ST26, in salinized soil collected from An Bien district, Kien Giang province, Vietnam, under greenhouse conditions. The experiment followed a completely randomized block design with two factors and four replications. In particular, the reduced percentages of P fertilizer (A) were 0%, 25%, 50%, 75%, and 100% P. The supplementations of C. sphaeroides strains (B) were the negative control, ST16, ST26, and a mixture of both ST16 and ST26. The results showed that supplying the C. sphaeroides ST16 and ST26 reduced the insoluble P content by 10.1–10.6% Fe-P, 10.3–12.2% Ca-P, and 12.7–43.1% Al-P and increased available P by 8.33–27.8%, leading to total P uptake in plants increasing by 29.4–56.1%. The C. sphaeroides strains also reduced soil Na⁺. Therefore, supplying the C. sphaeroides strains increased the rice growth and yield components of rice, leading to a greater yield of 26.5–51.0%. Supplying each strain of ST16 and ST26 reduced 50–100% P fertilizer as recommended. Ultimately, inoculation of the bacterial mixture allowed a reduction by 100% P fertilizer percentage as recommended but the yield remained the still. Full article

Anteroinferior shoulder dislocations require surgical intervention when related to critical glenoid bone loss. Scapular spine bone blocks have emerged as a promising alternative to traditional bone augmentation techniques. However, limited data exist on their biomechanical stability when using different suture-based fixation techniques. This study aimed to evaluate primary stability and micromotion after glenoid augmentation using a scapular spine bone block. A total of 31 fresh-frozen human shoulder specimens underwent bone block augmentation. The specimens were randomized into three groups: double-screw fixation (DSF), single-suture bone block cerclage (SSBBC), and double-suture bone block cerclage (DSBBC). Biomechanical testing was conducted using cyclic loading (5000 cycles at 1 Hz) and micromotion was analyzed using an optical 3D measurement system. Statistical analysis showed that medial irreversible displacement was significantly greater in the SSBBC group compared to DSF (p = 0.0386), and no significant differences were found in anterior or inferior irreversible displacements. A significant difference was noted in posterior reversible displacement (p = 0.0035), while no differences were found in inferior or medial reversible displacements. Between DSF and DSBBC, no significant differences were found in irreversible or reversible displacements in any direction. DSBBC provided stability comparable to DSF while offering a viable metal-free alternative. In contrast, SSBBC displayed inferior biomechanical properties, raising concerns about its clinical reliability. Full article

Worldwide, a growing list of critical (Bi, Co, Cu, F, Fe, Mo, Ni, P, PGE, REE, W, U, and Zn) and precious metal (Ag and Au) resources have been identified in mineral systems forming Fe-oxide-copper-gold (IOCG) deposits; Fe-oxide-apatite (IOA); Fe-sulfide Cu-Au (ISCG); and affiliated W skarn; Fe-rich Au-Co-Bi or Ni; albitite-hosted U or Au ± Co; and five-element (Ag, As, Co, Ni, and U) vein deposits. This paper frames the genesis of this metallogenic diversity by defining the Metasomatic Iron and Alkali-Calcic (MIAC) mineral system and classifying its spectrum of Fe-rich-to-Fe-poor and alkali-calcic deposits. The metasomatic footprint of MIAC systems consists of six main alteration facies, each recording a distinct stage of mineralization as systems have evolved. The fluid flow pathways and the thermal and chemical gradients inferred from the space–time distribution of the alteration facies within a system are best explained by the ascent and lateral propagation of a voluminous hypersaline fluid plume. The primary fluid plume evolves, chemically and physically, as metasomatism progresses and through periodic ingresses of secondary fluids into the plume. Exploration strategies can take advantage of the predictability and the expanded range of exploration targets that the MIAC system framework offers, the building blocks of which are the alteration facies as mappable prospectivity criteria for the facies-specific critical and precious metal deposits the systems generate. Global case studies demonstrate that these criteria are applicable to MIAC systems worldwide. Full article

Aegilops tauschii, a monocotyledonous annual grass, recognized as a pivotal progenitor of modern wheat (Triticum aestivum L.), serves as the D-genome donor in hexaploid wheat. This diploid species (2n = 2x = 14, DD) harbors a substantial reservoir of genetic diversity, particularly in terms of biotic and abiotic stress resistance traits. The extensive allelic variation present in its genome has been increasingly utilized for wheat genetic enhancement, particularly through introgression breeding programs aimed at improving yield potential and stress resilience. Heavy metal ATPases (HMAs), which belong to the P-type ATPase superfamily and are also known as P1B-type ATPases, play a crucial role in transporting heavy metals and maintaining metal ion homeostasis in plant cells. HMAs have been extensively studied in model plants like Arabidopsis thaliana and rice. However, this family has not been reported in A. tauschii. Here, we conducted the genome-wide identification and bioinformatics analysis of the AetHMA gene family in A. tauschii, resulting in the discovery of a total of nine AetHMA members. Among AetHMA genes, six pairs are large-block duplication genes, which mainly occur among the four genes of AetHMA2, AetHMA4, AetHMA8, and AetHMA9. Additionally, there is one pair that consists of tandem duplication genes (AetHMA6: AetHMA7). All AetHMAs can be classified into six groups (I–VI), which are further divided into two branches: the copper subclasses and the zinc subclasses. Initially, A. tauschii was grown in a 1/2 Hoagland nutrient solution and subsequently exposed to four heavy metals: zinc (Zn), copper (Cu), manganese (Mn), and cadmium (Cd). Following this treatment, the expression profiles of nine AetHMA genes were assessed. The results indicated that, under zinc and manganese stress, the HMA family members exhibited enhanced expression in the leaves, whereas the expression of most members in the roots was downregulated. In the roots, except for AetHMA2, AetHMA5, and AetHMA8, the expression levels of other members were upregulated in response to Cd exposure. Furthermore, AetHMA4 diminishes the tolerance of yeast to Mn by increasing the absorption of Mn, while AetHMA8 increases the tolerance of yeast to Cd by reducing the absorption of Cd. This study provides experimental data regarding the function of the AetHMA gene in the transport, regulation, and detoxification of heavy metal elements in A. tauschii. Full article

The circular economy practice of using waste to fertilize plants should be more widespread. It is a means to manage natural resources sustainably in agriculture. This approach is in line with organic and sustainable farming strategies, reducing the cultivation costs. Organic waste dumped into a landfill decomposes and emits greenhouse gases. This can be reduced through its application to energy crops, which not only has a positive impact on the environment but also improves the soil quality and increases yields. However, organic waste with increased content of heavy metals, when applied to the soil, can also pose a threat. Using Miscanthus × giganteus M 19 as a test plant, an experiment with a randomized block design was established in four replications in Central–Eastern Poland in 2018. Various combinations of organic waste (municipal sewage sludge and spent mushroom substrate) were applied, with each dose containing 170 kg N ha⁻¹. After three years (in 2020), the soil content of total nitrogen (N_t) and carbon (C_t) was determined by elemental analysis, with the total content of P, K, Ca, Mg, S, Na, Fe, Mn, Mo, Zn, Ni, Pb, Cr, Cd, and Cu determined by optical emission spectrometry, after wet mineralization with aqua regia. For the available forms of P and K, the Egner–Riehm method was used, and the Schachtschabel method was used for the available forms of Mg. The total content of bacteria, actinomycetes, and fungi was also measured. The application of municipal sewage sludge (SS) alone and together with spent mushroom substrate (SMS) improved the microbiological composition of the soil and increased the content of N_t and C_t and the available forms of P₂O₅ and Mg more than the application of SMS alone. SMS did not contaminate the soil with heavy metals. In the third year, their content was higher after SS than after SMS application, namely for Cd by 12.2%, Pb by 18.7%, Cr by 25.3%, Zn by 16.9%, and Ni by 14.7%. Full article