Search Results (75)

In modern power systems, FACTS tools are essential for addressing voltage variation along with fault ride-through (FRT) challenges within the electrical power systems, particularly for wind generation integration. Several prominent publications emphasize that the squirrel cage induction generator (SCIG) currently comprises about 15% of operational wind turbines. This research proposes the use of FACTS devices to boost voltage stability and FRT capability. The implementation of these devices leads to improved efficiency in the electrical power system. This study considers many events, including an ideal wind profile, turbulent wind profile, symmetrical faults, and unsymmetrical faults, to support the proposed selection. Furthermore, the proposed approach is evaluated by comparison between a fixed capacitor, static synchronous compensator (STATCOM), and Static VAR Compensator (SVC) to guarantee the achievement of voltage stability, reactive power consumption, and FRT capacity under various wind speed profiles and fault conditions. An overall evaluation is conducted to compare them in all examined circumstances and to highlight their advantages and effects. The simulation findings demonstrate the efficacy and primacy of FACTS in enhancing the functioning of an integrated wind system, which is built upon a grid-connected SCIG, as well as enhancing the power system performance. The MATLAB/Simulink toolbox is used to design the models of SCIG, SVC, and STATCOM. Full article

This document focuses on the mitigation of subsynchronous resonance (SSR) in doubly fed induction generators (DFIGs) through the application of an effective solution based on the use of a Static Synchronous Compensator (STATCOM) with fuzzy logic. The STATCOM, a static parallel compensator, improved the stability, quality, and reliability of the power supply in distribution systems by optimizing the response to voltage fluctuations. Combined with fuzzy logic, it provided flexible and efficient control, reducing oscillations arising in the system. Two case studies were carried out in which the DFIG and the STATCOM module with fuzzy logic were implemented in IEEE 13- and IEEE 33-bus systems. Comparative analyses with and without compensation were performed to assess the system’s behavior in response to oscillations generated by the generator, taking voltages as the main variable. The results showed that the fuzzy–PI controlled STATCOM effectively stabilized voltage profiles, mitigating SSR and improving system reliability. In the IEEE 13-bus case, voltage oscillations were reduced by approximately 72% and the bus voltages converged to 0.99–1.01 p.u. within 1.5 s. In the IEEE 33-bus system, the controller achieved a suppression rate of 68%, with voltages restored to 0.98–1.02 p.u. in less than 2 s. These findings demonstrate the efficiency of the proposed fuzzy–PI STATCOM in suppressing subsynchronous oscillations and enhancing stability in DFIG-based networks. Full article

The global transition toward renewable energy and the electrification of transportation is imposing unprecedented power quality (PQ) challenges on modern distribution networks, rendering traditional governance models inadequate. To bridge the existing research gap of the lack of a holistic analytical framework, this review first establishes a systematic diagnostic methodology by introducing the “Triadic Governance Objectives–Scenario Matrix (TGO-SM),” which maps core objectives—harmonic suppression, voltage regulation, and three-phase balancing—against the distinct demands of high-penetration photovoltaic (PV), electric vehicle (EV) charging, and energy storage scenarios. Building upon this problem identification framework, the paper then provides a comprehensive review of advanced mitigation technologies, analyzing the performance and application of key ‘unit operations’ such as static synchronous compensators (STATCOMs), solid-state transformers (SSTs), grid-forming (GFM) inverters, and unified power quality conditioners (UPQCs). Subsequently, the review deconstructs the multi-timescale control conflicts inherent in these systems and proposes the forward-looking paradigm of “Distributed Dynamic Collaborative Governance (DDCG).” This future architecture envisions a fully autonomous grid, integrating edge intelligence, digital twins, and blockchain to shift from reactive compensation to predictive governance. Through this structured approach, the research provides a coherent strategy and a crucial theoretical roadmap for navigating the complexities of modern distribution grids and advancing toward a resilient and autonomous future. Full article

Australia has the highest per capita penetration of rooftop solar PV systems in the world. Integration of these systems has led to reverse power flow and associated voltage rise problems in residential low-voltage (LV) distribution networks. Furthermore, random, uncontrolled connection of single-phase solar systems can exacerbate voltage unbalance in these networks. This paper investigates the application of a Static Synchronous Compensator (STATCOM) for the improvement of voltage regulation in four-wire LV distribution feeders through reactive power management as a means of mitigating voltage regulation and unbalance challenges. To demonstrate the performance of the STATCOM with varying loads and PV output, a Q-V droop curve is applied to specify the level of reactive power injection/absorption required to maintain appropriate voltage regulation. A practical four-wire feeder from New South Wales, Australia, has been used as a case study network to analyse improvements in system performance through the use of the STATCOM. The outcomes indicate that the STATCOM has a high degree of efficacy in mitigating voltage regulation and unbalance excursions. In addition, compared to other solutions identified in the existing literature, the STATCOM-based solution requires no sophisticated communication infrastructure. Full article

In this paper, we address the problem of intelligent operation of Distribution Static Synchronous Compensators (D-STATCOMs) in power distribution systems to reduce energy losses and CO₂ emissions while improving system operating conditions. In addition, we consider the entire set of constraints inherent in the operation of such networks in an environment with D-STATCOMs. To solve such a problem, we used three master–slave methodologies based on sequential programming methods. In the proposed methodologies, the master stage solves the problem of intelligent D-STATCOM operation using the continuous versions of the Monte Carlo (MC) method, the population-based genetic algorithm (PGA), and the Particle Swarm Optimizer (PSO). The slave stage, for its part, evaluates the solutions proposed by the algorithms to determine their impact on the objective functions and constraints representing the problem. This is accomplished by running an Hourly Power Flow (HPF) based on the method of successive approximations. As test scenarios, we employed the 33- and 69-node radial test systems, considering data on power demand and CO₂ emissions reported for the city of Medellín in Colombia (as documented in the literature). Furthermore, a test system was adapted in this work to the demand characteristics of a feeder located in the city of Talca in Chile. This adaptation involved adjusting the conductors and voltage limits to include a test system with variations in power demand due to seasonal changes throughout the year (spring, winter, autumn, and summer). Demand curves were obtained by analyzing data reported by the local network operator, i.e., Compañía General de Electricidad. To assess the robustness and performance of the proposed optimization approach, each scenario was simulated 100 times. The evaluation metrics included average solution quality, standard deviation, and repeatability. Across all scenarios, the PGA consistently outperformed the other methods tested. Specifically, in the 33-node system, the PGA achieved a 24.646% reduction in energy losses and a 0.9109% reduction in CO₂ emissions compared to the base case. In the 69-node system, reductions reached 26.0823% in energy losses and 0.9784% in CO₂ emissions compared to the base case. Notably, in the case of the Talca feeder—particularly during summer, the most demanding season—the PGA yielded the most significant improvements, reducing energy losses by 33.4902% and CO₂ emissions by 1.2805%. Additionally, an uncertainty analysis was conducted to validate the effectiveness and robustness of the proposed optimization methodology under realistic operating variability. A total of 100 randomized demand profiles for both active and reactive power were evaluated. The results demonstrated the scalability and consistent performance of the proposed strategy, confirming its effectiveness under diverse and practical operating conditions. Full article

For power electronic interfaces, Direct Power Control (DPC) has emerged as a leading control technique, especially in applications such as synchronous motors, induction motors, and other electric drives; renewable energy sources (such as photovoltaic inverters and wind turbines); and converters that are grid-connected, such as Virtual Synchronous Generator (VSG) and Static Compensator (STATCOM) configurations. DPC accomplishes several significant goals by avoiding the inner current control loops and doing away with coordinating transformations. The application of STATCOM based on three- and five-level diode-clamped inverters is covered in this work. The study checks the abilities of DPC during power control adjustments during diverse grid operation scenarios while detailing how multilevel inverters affect system stability and power reliability. Proportional Integral (PI) controllers are used to control active and reactive power levels as part of the control approach. This study shows that combining DPC with Sinusoidal Pulse Width Modulation (SPWM) increases the system’s overall electromagnetic performance and control accuracy. The performance of STATCOM systems in power distribution and transient response under realistic operating conditions is assessed using simulation tools applied to three-level and five-level inverter topologies. In addition to providing improved voltage quality and accurate reactive power control, the five-level inverter structure surpasses other topologies by maintaining a total harmonic distortion (THD) below 5%, according to the main findings. The three-level inverter operates efficiently under typical grid conditions because of its straightforward design, which uses less processing power and computational complexity. Full article

The optimal integration of photovoltaic (PV) systems and distribution static synchronous compensators (D-STATCOMs) in electrical distribution networks is important to reduce their operating costs, improve their voltage profiles, and enhance their power quality. To this effect, this paper proposes a mixed-integer convex (MI-Convex) optimization model for the optimal siting and sizing of PV systems and D-STATCOMs, with the aim of minimizing investment and operating costs in electrical distribution networks. The proposed model transforms the traditional mixed-integer nonlinear programming (MINLP) formulation into a convex model through second-order conic relaxation of the nodal voltage product. This model ensures global optimality and computational efficiency, which is not achieved using traditional heuristic-based approaches. The proposed model is validated on IEEE 33- and 69-bus test systems, showing a significant reduction in operating costs in both feeders compared to traditional heuristic-based approaches such as the vortex search algorithm (VSA), the sine-cosine algorithm (SCA), and the sech-tanh optimization algorithm (STOA). According to the results, the MI-convex model achieves cost savings of up to 38.95% in both grids, outperforming the VSA, SCA, and STOA. Full article

To address the challenge of a conventional line-commutated converter (LCC), unable to operate properly in connection with a very weak AC system, the technology of the capacitor-commutated converter (CCC) was widely utilized in 1990s. The topology of the CCC is constructed as a conventional LCC modified with a series capacitor between the converter transformer and the thyristor valves in each phase. Additional phase voltage can be generated on the capacitor to assist the process of the commutation. However, the CCC technology may experience continuous commutation failure due to the uncontrolled charging of the series capacitor. Based on the submodule-cascaded static synchronous compensator (STATCOM), this paper proposes a novel topology called the submodule-cascaded STATCOM-based CCC (SCCC). The SCCC technology enables the function of reactive power compensation and active filtering. It can also improve the transient characteristics of the AC faults via dynamic reactive power injection during the transient process, which helps to reduce the risk of continuous commutation failure in the CCC. Full article

This study proposes an optimized energy management strategy for alternating current microgrids, integrating wind generation, battery energy storage systems (BESSs), and distribution static synchronous compensators (D-STATCOMs). The objective is to minimize operational costs, including grid electricity purchases (grid-connected mode), diesel generation costs (islanded mode), and maintenance expenses of distributed energy resources while ensuring voltage limits, maximum line currents, and power balance. A master–slave optimization approach is employed, where the Gray Wolf Optimizer (GWO) determines the optimal dispatch of energy resources, and successive approximations (SAs) perform power flow analysis. The methodology was validated on a 33-node microgrid, considering variable wind generation and demand profiles from a Colombian region under grid-connected and islanded conditions. To assess performance, 100 independent runs per method were conducted, comparing GWO against particle swarm optimization (PSO) and genetic algorithms (GAs). Statistical analysis confirmed that GWO achieved the lowest operational costs (USD 3299.39 in grid-connected mode and USD 11,367.76 in islanded mode), the highest solution stability (0.19% standard deviation), and superior voltage regulation. The results demonstrate that GWO with SA provides the best trade-off between cost efficiency, system stability, and computational performance, making it an optimal approach for microgrid energy management. Full article

Static synchronous compensators (STATCOMs) are widely applied in modern power networks for reactive power compensation and grid voltage regulation. Compared to the conventional compensation devices, the STATCOMs deliver superior performance through the voltage-droop control loop. However, the interaction between the STATCOMs and grid impedance, especially in weak grids, can lead to stability issues. To investigate this instability mechanism, the STATCOMs and grid impedance are modeled as a multi-input–multi-output system in this paper. Thus, the coupling effects between the control loop and the grid impedance are clearly highlighted, making the stability assessment feasible. The proposed method avoids the cost and volume issues associated with adding physical inductance in traditional approaches to mitigate these coupling effects. It not only improves the operational stability of the STATCOM but also enhances its voltage support capability, thereby supplementing the stability research for weak grids with STATCOMs under this specific condition. The effectiveness of the presented analysis and proposed control scheme are validated through both simulation and experimental results. Full article

This paper examines the deployment of a 25 MVA Static Synchronous Compensator (STATCOM) to improve voltage stability in a real 66 kV 525 MVA transmission network in the Middle Egypt Electricity Zone. A MATLAB/Simulink model is developed to assess the performance of the STATCOM in both normal and fault conditions, including single-phase and three-phase faults. The STATCOM regulates the voltage by adjusting it within ±10% of the nominal value and is connected to a shunt with the bus B11. Four control strategies are implemented: a proportional–integral (PI) controller, an adaptive neuro-fuzzy inference system (ANFIS), a fuzzy logic controller (FLC), and an FLC combined with a supercapacitor. FLCs outperform PI controllers in maintaining voltage stability; however, they exhibit limitations regarding their responsiveness to dynamic changes within the network. The findings demonstrate that the STATCOM enhances the voltage and current stability compared to the system without this component. The ANFIS controller demonstrates optimal performance characterized by minimal waveform fluctuations. Under standard conditions, a single STATCOM integrated with an ANFIS elevates the bus voltages to 100.382% (B10) and 101.953% (B11), surpassing the performance of the FLC (100.314% and 101.246%) and the FLC–supercapacitor combination (100.326% and 101.392%). The deployment of two STATCOM units alongside an ANFIS improves the voltage levels to 102.122% (B10) and 102.200% (B11). The findings demonstrate that the AN-FIS-controlled STATCOM enhances system performance under normal operating conditions, voltage source fluctuations, and fault scenarios. The deployment of two STATCOM units, each rated at 25 MVA and controlled by an ANFIS, significantly enhances voltage stability compared to a single unit. Full article

Rising electricity demand and the need to reduce pollutant emissions highlight the importance of renewable energy, especially solar power. While most studies on photovoltaic (PV) integration focus on developed countries, least developed and developing countries such as the Democratic Republic of Congo (DRC) face particular challenges due to fragile grid infrastructure. This work evaluates the technical and operational impacts of PV integration into the western grid of the DRC using DIgSILENT PowerFactory 2021 SP2 simulations. It examines penetration levels from 10% to 50% based on a 2012 MW baseline, and evaluates power losses, short-circuit ratios (SCRs), grid stability, harmonic distortions, and voltage oscillations. Results reveal that moderate penetration levels (10–20%) reduce active power losses by 25% while maintaining stability. However, above 30% penetration, critical challenges arise, including a drop of the SCR below the minimum recommended value of 3, prolonged voltage oscillations, and increased harmonic distortions, resulting from the reduced overall inertia of the grid following the increase in PV power from inverters without inertia. These findings emphasize the need for targeted solutions like Battery Energy Storage Systems (BESSs), Static Synchronous Compensators (STATCOMs), and harmonic filters. This work provides foundational insights for PV integration in fragile grids of LDCs and developing countries. Full article

Based on the principles of reinjection converter technology and submodule operation, a novel topology for a reinjection multilevel voltage source converter (RMVSC) is proposed. In this topology, submodules are dynamically connected in series as the reinjection circuit. This new topology retains all the functions of the RMVSC while offering flexible control of the reinjection circuit and ease of modularization, making it highly suitable for high-voltage, high-power applications. A circulating drive pulse sequence was developed for the 7-level serial submodule RMVSC, ensuring dynamic stability of the submodule voltage and maintaining low harmonic distortion when interfaced with the grid. Building on this, a double-loop control strategy—comprising an outer power loop and an inner current loop—was proposed for the static synchronous compensator (STATCOM) of RMVSC. A simulation model was constructed in PSCAD/EMTDC, and the simulation results confirm the excellent performance of the proposed topology and the effectiveness of both the modulation strategy and the double-loop control strategy. The RMVSC-STATCOM demonstrates continuous and bidirectional reactive power regulation, with high control accuracy and superior compensation current quality. Full article

The continuously growing penetration of renewable energy sources (RESs) in electrical networks provides increasing challenges and critical situations to be managed by worldwide system operators. Due to their features and variability, non-programmable RES power plants, whose increasing penetration reduces the inertia level of the power system, may determine the instability effects on the grids, especially from the frequency and voltage regulation standpoints. The present study focuses on the support that advanced FACTS (Flexible Alternating Current Transmission System) devices, such as STATCOMs (Static Synchronous Compensators), can provide to the power system operation in terms of system inertia improvement, frequency stability, and voltage stability. In particular, a review of the scientific literature and practice is performed, with the aim of benchmarking the ongoing evolution of these technologies, also comparing them with different options based on synchronous condensers, synchronous condensers integrated with flywheels, and STATCOMs with supercapacitors. The outcome of the analysis consists of an updated evaluation of the state-of-the-art technological development in the field and of a comparison between different FACTSs with the purpose of identifying the most suitable solutions for different practical situations, also taking account of synergies across various options. This study includes an updated overview regarding the status of STATCOM installation in the Italian power grid. Full article

This paper introduces fractional-order capacitors and fractional-order inductors into the conventional integer-order cascaded H-bridge multilevel static compensator (ICHM-STATCOM), thereby constructing the main circuit of the fractional-order cascaded H-bridge multilevel static compensator (FCHM-STATCOM). Mechanism-based modeling is employed to establish switching function models and low-frequency dynamic models for the FCHM-STATCOM in the three-phase stationary coordinate system (a-b-c). Subsequently, fractional-order rotating coordinate transformation is introduced to establish the mathematical model of the FCHM-STATCOM in the synchronous rotating coordinate system (d-q). Additionally, a fractional-order proportional-integral (FOPI)-based fractional-order dual closed-loop current decoupling control strategy is proposed. Finally, this paper validates the correctness of the established mathematical models through digital simulation. Moreover, the simulation results demonstrate that by appropriately selecting the order of fractional-order capacitors and fractional-order inductors, the FCHM-STATCOM exhibits superior dynamic and static characteristics compared to the conventional ICHM-STATCOM, and the FCHM-STATCOM provides a more flexible reactive power compensation solution for power systems. Full article