Skip to Content
MaterialsMaterials
  • Correction
  • Open Access

8 December 2023

Correction: Zhang et al. Experimental and Numerical Studies on Hot Compressive Deformation Behavior of a Cu–Ni–Sn–Mn–Zn Alloy. Materials 2023, 16, 1445

,
,
,
,
and
1
State Key Laboratory for Powder Metallurgy, Central South University, Changsha 410083, China
2
School of Materials Science and Engineering, Central South University, Changsha 410083, China
3
Key Laboratory of Non-Ferrous Metal Materials Science and Engineering, Ministry of Education, Changsha 410083, China
4
Ningbo Boway Alloy Material Co., Ltd., Ningbo 315135, China
In the original publication [1], there was a mistake in Figure 5 as published. We found that we had accidentally duplicated plot a as plot c in the process of grouping the fitted curves. The corrected Figure 5 appears below. However, we believe that this does not significantly change the scope or message of the paper. The authors apologize for any inconvenience caused and state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.
Figure 5. Relationship between peak stress and strain rate: (a)   ln ε ˙ ~ σ p curve; (b) ln ε ˙ ~ ln σ p curve; (c)   ln ε ˙ ~ ln [ sinh ( α σ p ) ] curve.

Reference

  1. Zhang, Y.; Xiao, Z.; Meng, X.; Xiao, L.; Pei, Y.; Gan, X. Experimental and Numerical Studies on Hot Compressive Deformation Behavior of a Cu–Ni–Sn–Mn–Zn Alloy. Materials 2023, 16, 1445. [Google Scholar] [CrossRef] [PubMed]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.