Next Article in Journal
A Screen-Printed Voltammetric Sensor Modified with Electropolymerized Molecularly Imprinted Polymer (eMIP) to Determine Gallic Acid in Non-Alcoholic and Alcoholic Beverages
Previous Article in Journal
The Preparation and Performance of Epoxy/Acetylene Carbon Black Wave-Absorbing Foam
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Correction

Correction: Volova et al. Laser Processing of Polymer Films Fabricated from PHAs Differing in Their Monomer Composition. Polymers 2021, 13, 1553

by
Tatiana G. Volova
1,2,*,
Alexey I. Golubev
3,4,
Ivan V. Nemtsev
1,3,5,
Anna V. Lukyanenko
1,3,
Alexey E. Dudaev
1,2 and
Ekaterina I. Shishatskaya
1,2
1
Basic Department of Biotechnology, School of Fundamental Biology and Biotechnology, Siberian Federal University, 79 Svobodnyi Av., 660041 Krasnoyarsk, Russia
2
Institute of Biophysics SB RAS, Federal Research Center “Krasnoyarsk Science Center SB RAS”, 50/50 Akademgorodok, 660036 Krasnoyarsk, Russia
3
L.V. Kirensky Institute of Physics SB RAS, Federal Research Center “Krasnoyarsk Science Center SB RAS”, 50/38 Akademgorodok, 660036 Krasnoyarsk, Russia
4
Special Design and Technological Bureau ‘Nauka’ Federal Research Center “Krasnoyarsk Science Center SB RAS”, 50/45 Akademgorodok, 660036 Krasnoyarsk, Russia
5
Federal Research Center “Krasnoyarsk Science Center of the Siberian Branch of the Russian Academy of Sciences” 50 Akademgorodok, 660036 Krasnoyarsk, Russia
*
Author to whom correspondence should be addressed.
Polymers 2024, 16(8), 1075; https://doi.org/10.3390/polym16081075
Submission received: 6 March 2024 / Accepted: 28 March 2024 / Published: 12 April 2024
(This article belongs to the Section Biomacromolecules, Biobased and Biodegradable Polymers)
In the original publication [1], there was a mistake in Figure 1 as published. The image of the sample P(3HB-co-3HV) = 72.8/27.2 mol.% is mixed up. The corrected Figure 1 appears below. The authors apologize for any inconvenience caused and state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.

Reference

  1. Volova, T.G.; Golubev, A.I.; Nemtsev, I.V.; Lukyanenko, A.V.; Dudaev, A.E.; Shishatskaya, E.I. Laser Processing of Polymer Films Fabricated from PHAs Differing in Their Monomer Composition. Polymers 2021, 13, 1553. [Google Scholar] [CrossRef] [PubMed]
Figure 1. SEM (a) and AFM (b) images of pristine (non-treated) polymer films prepared from PHAs with different chemical composition.
Figure 1. SEM (a) and AFM (b) images of pristine (non-treated) polymer films prepared from PHAs with different chemical composition.
Polymers 16 01075 g001
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Volova, T.G.; Golubev, A.I.; Nemtsev, I.V.; Lukyanenko, A.V.; Dudaev, A.E.; Shishatskaya, E.I. Correction: Volova et al. Laser Processing of Polymer Films Fabricated from PHAs Differing in Their Monomer Composition. Polymers 2021, 13, 1553. Polymers 2024, 16, 1075. https://doi.org/10.3390/polym16081075

AMA Style

Volova TG, Golubev AI, Nemtsev IV, Lukyanenko AV, Dudaev AE, Shishatskaya EI. Correction: Volova et al. Laser Processing of Polymer Films Fabricated from PHAs Differing in Their Monomer Composition. Polymers 2021, 13, 1553. Polymers. 2024; 16(8):1075. https://doi.org/10.3390/polym16081075

Chicago/Turabian Style

Volova, Tatiana G., Alexey I. Golubev, Ivan V. Nemtsev, Anna V. Lukyanenko, Alexey E. Dudaev, and Ekaterina I. Shishatskaya. 2024. "Correction: Volova et al. Laser Processing of Polymer Films Fabricated from PHAs Differing in Their Monomer Composition. Polymers 2021, 13, 1553" Polymers 16, no. 8: 1075. https://doi.org/10.3390/polym16081075

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop