Article Menu

Open AccessArticle

Peer-Review Record

Tolerance Design and Robust Study for The Joint Clearances of Landing Gear Retraction Mechanisms

Appl. Sci. 2020, 10(14), 4856; https://doi.org/10.3390/app10144856

by Li Zhang^1,†

, Hong Nie^2,*,† and Xiaohui Wei^2,†

Reviewer 1: Anonymous

Reviewer 2: Anonymous

Appl. Sci. 2020, 10(14), 4856; https://doi.org/10.3390/app10144856

Submission received: 8 June 2020 / Revised: 10 July 2020 / Accepted: 11 July 2020 / Published: 15 July 2020

(This article belongs to the Section Mechanical Engineering)

Round 1

Reviewer 1 Report

Figure 3. the landing gear retraction mechanism...

Figure 4. the main connecting and lock mechanism

Table 5. tolerances and experiment levels <<

names should be uppercase

------------------------------------

What is the source of Figure 2? ------------------------------------ >>lines 150- 185<< use only one type of mark at the end of a sentence: , or ;

------------------------------------

>>line 134<<

Exactly what parameters ANOVA analysis was applied to

------------------------------------

Are the authors planning to modify their mechanism in the future ?. If so, write it in the conclusions

------------------------------------

Congratulations to the authors for their interesting work and research. I believe that research should continue

Author Response

Dear reviewer,

Thank you for your comments. The reeponses for your comments are written in the attachment.

Thank you again and Best regards!

Author Response File: Author Response.pdf

Reviewer 2 Report

Dear

The interpretation of Figure 2 is not clear. You should develop it more unerstandable.

The (4) matrix is not clear. What is it? Which is equal with?

Author Response

Dear reviewer,

Thank you for your comments. The responses for your comments are in the attachment.

Thank you again and best regards.

Author Response File: Author Response.pdf