Reviewer Board
Members of the reviewer board are selected from all Materials reviewers for regularly providing timely high quality reports on submitted manuscripts. Responsibilities of reviewers are available here.
Members
Mechanical Engineering Department, Sungkyunkwan University, Seoul, Republic of Korea
Interests: graphene; ZnO; polyamide; CNT; graphene-polymer film; moisture sensor; membrane; nylon 6; photocatalysis
Interests: graphene; ZnO; polyamide; CNT; graphene-polymer film; moisture sensor; membrane; nylon 6; photocatalysis
Department of Materials Engineering, Tatung University, Taipei City, Taiwan
Interests: metallic materials; heat treatment; coatings; mechanical property; wear; corrosion
Interests: metallic materials; heat treatment; coatings; mechanical property; wear; corrosion
Department of Building Structures and Geotechnical Engineering, School of Architecture, Universidad de Sevilla, Av. Reina Mercedes 2, 41012 Sevilla, Spain
Interests: concrete structures; rehabilitation; building structures
Interests: concrete structures; rehabilitation; building structures
NanoBioMedical Centre, Adam Mickiewicz University in Poznan, Poznan, Poland
Interests: biosensors; hybrid materials; optoelectronics; atomic layer deposition; metal oxide; nano silicon; solar water splitting; electro spinning
Interests: biosensors; hybrid materials; optoelectronics; atomic layer deposition; metal oxide; nano silicon; solar water splitting; electro spinning
Robotics and Mechatronics Department, Institute of Solid Mechanics, Romanian Academy, 15 Constantin Mille, 10141 Bucharest, Romania
Interests: applied statistics; mechatronics; mechanics; advanced technologies
Interests: applied statistics; mechatronics; mechanics; advanced technologies
Department of Electronics Technology, Budapest University of Technology and Economics, 1111 Budapest, Hungary
Interests: quality assurance in microelectronics; electronics manufacturing; technological process modeling
Interests: quality assurance in microelectronics; electronics manufacturing; technological process modeling
Toyama Prefectural University
Interests: superplasticity; creep; high-temperature deformation; solid-phase bonding; friction stir welding; microstructure refinement; friction stir processing; mechanical property; fatigue; reliability engineering; powder metallurgy; spark plasma sintering; antibacterial material; metal porous; structural material
Interests: superplasticity; creep; high-temperature deformation; solid-phase bonding; friction stir welding; microstructure refinement; friction stir processing; mechanical property; fatigue; reliability engineering; powder metallurgy; spark plasma sintering; antibacterial material; metal porous; structural material
Department of Transportation Engineering, Faculty of Civil Engineering and Architecture, Kielce University of Technology, Al. Tysiąclecia Państwa Polskiego 7, 25‐314 Kielce, Poland
Interests: pavement materials; asphalt materials; paving materials; asphalt pavements; the influence of the low-viscosity modifier on behavior of the bitumen asphalt pavements; warm mix asphalt (wma) technologies; half warm mix asphalt (hwma) technologies; rheological characteristic of synthetic wax-modified asphalt binders used hydrated lime to asphalt mix and asphalt pavements
Interests: pavement materials; asphalt materials; paving materials; asphalt pavements; the influence of the low-viscosity modifier on behavior of the bitumen asphalt pavements; warm mix asphalt (wma) technologies; half warm mix asphalt (hwma) technologies; rheological characteristic of synthetic wax-modified asphalt binders used hydrated lime to asphalt mix and asphalt pavements
Department of Organic Technology, Faculty of Chemistry and Technology, University of Split, Rudera Boskovica 35, 21000 Split, Croatia
Interests: polymer; polymer blends; termogravimetric analysis; diferential scanning calorimetry; infrared spectroscopy; extrusion; kinetic analysis; thermal degradation
Interests: polymer; polymer blends; termogravimetric analysis; diferential scanning calorimetry; infrared spectroscopy; extrusion; kinetic analysis; thermal degradation
The Henryk Niewodniczański Institute of Nuclear Physics Polish Academy of Sciences, Krakow, Poland
Interests: nanotechnology; porous materials; functional materials
Interests: nanotechnology; porous materials; functional materials
Department of Chemistry, Silesian University of Technology, Krzywoustego 4, 44-100 Gliwice, Poland
Interests: nanomaterial; material science; material engineering; chemistry; nanotubes; graphene; nanowires; nanoparticles; carbon; electrical properties; thermal properties; optical properties; thermoelectric properties; catalysis; thin films; functionalization
Interests: nanomaterial; material science; material engineering; chemistry; nanotubes; graphene; nanowires; nanoparticles; carbon; electrical properties; thermal properties; optical properties; thermoelectric properties; catalysis; thin films; functionalization
Faculty of Metallurgy, University of Zagreb, Aleja narodnih heroja 3, 44000 Sisak, Croatia
Interests: steel; metal alloys; material testing; thermography; digital image correlation; plastic deformation
Interests: steel; metal alloys; material testing; thermography; digital image correlation; plastic deformation
Department of Building Structures and Laboratory of Civil Engineering Faculty, Silesian University of Technology, Gliwice, Poland
Interests: masonry structures; reinforced concrete structures; mechanics of materials and structures; mechanical tests of materials; FEM; analysis of materials and structures; reliability of the structures; engineering of buildings materials
Interests: masonry structures; reinforced concrete structures; mechanics of materials and structures; mechanical tests of materials; FEM; analysis of materials and structures; reliability of the structures; engineering of buildings materials
Politecnico do Torino, Torino, Italy
Interests: nanocomposites; SOFC; thin films and coatings; scratch test; glass-ceramic; bulge test; SOEC; solid oxide cell
Interests: nanocomposites; SOFC; thin films and coatings; scratch test; glass-ceramic; bulge test; SOEC; solid oxide cell
Faculty of Mechanical Engineering, Department of Foundry Engineering, Silesian University of Technology, 44-100 Gliwice, Poland
Interests: ductile cast iron; pneumatic conveying; gating systems; heavy cast steel casting; cast iron inoculation; metal filtration
Interests: ductile cast iron; pneumatic conveying; gating systems; heavy cast steel casting; cast iron inoculation; metal filtration
Institute of Chemistry and Technical Electrochemistry, Poznan University of Technology, ul. Berdychowo 4, 60-965 Poznan, Poland
Interests: energy storage; renewable energy; materials synthesis and characterization; electrochemical capacitors; metal-ion batteries; hybrid energy storage devices; metal-ion capacitors
Interests: energy storage; renewable energy; materials synthesis and characterization; electrochemical capacitors; metal-ion batteries; hybrid energy storage devices; metal-ion capacitors
Department of Radiation Oncology, Stanford University
269 Campus Drive, CCSR 1230, Stanford University, Stanford, CA 94305, USA
Interests: nanomedicine; bioimaging; diagnostic; cancer therapy
Interests: nanomedicine; bioimaging; diagnostic; cancer therapy
Magnel-Vandepitte Laboratory, Department of Structural Engineering and Building Materials, Faculty of Engineering and Architecture, Ghent University, Stalhof 43, 9000 Ghent, Belgium
Interests: cement; concrete; rheology; mixture design; 3D concrete printing
Interests: cement; concrete; rheology; mixture design; 3D concrete printing
Center for Agile and Adaptive Additive Manufacturing, University of North Texas, Denton, TX 76207, USA
Interests: hydrogel; non-destructive evaluation; acoustics; additive manufacturing; elastography; friction stir welding; ultrasonic imaging; in-situ monitoring; Laser-based manufacturing; acoustic metamaterials; elastic metamaterials; acoustic lens
Interests: hydrogel; non-destructive evaluation; acoustics; additive manufacturing; elastography; friction stir welding; ultrasonic imaging; in-situ monitoring; Laser-based manufacturing; acoustic metamaterials; elastic metamaterials; acoustic lens
Section of Implant and Rehabilitative Dentistry, Division of Oral Rehabilitation, Faculty of Dentistry, Kyushu University, Fukuoka, Japan
Interests: bone substitute material; dental implant; prosthodontics
Interests: bone substitute material; dental implant; prosthodontics
Institute of Agricultural Engineering and Safety, Agriculture Academy, Vytautas Magnus University, Kaunas, Lithuania
Interests: dynamic analysis; mechatronic system of agricultural machines; precision agriculture technologies; vibration and noise; cad technology; agricultural waste recycling
Interests: dynamic analysis; mechatronic system of agricultural machines; precision agriculture technologies; vibration and noise; cad technology; agricultural waste recycling
The Department of Plastic Forming, Welding and Metrology, Wrocław University of Science and Technology, Wybrzeże Wyspiańskiego 27, 50-370 Wrocław, Poland
Interests: crashworthiness; honeycomb structures; crash-box
Interests: crashworthiness; honeycomb structures; crash-box
Faculty of Chemistry, ul, Adam Mickiewicz University in Poznań, Uniwersytetu Poznańskiego 8, 61-614 Poznań, Poland
Interests: chemistry; materials science; materials characterisation; nanotechnology; heterogeneous catalysis; catalytic processes; green chemistry; nanomaterials synthesis; electron microscopy; spectroscopic techniques; operando systems; lanthanide nanomaterials
Interests: chemistry; materials science; materials characterisation; nanotechnology; heterogeneous catalysis; catalytic processes; green chemistry; nanomaterials synthesis; electron microscopy; spectroscopic techniques; operando systems; lanthanide nanomaterials
Catalytic and Electrochemical Processes for Energy Applications, Dutch Institute for Fundamental Energy Research (DIFFER), Eindhoven, The Netherlands
Interests: Li-ion; sodium; sulfur based batteries; solid state batteries
Interests: Li-ion; sodium; sulfur based batteries; solid state batteries
Department of Architecture and Architectural Engineering, Seoul National University, Seoul 08826, Republic of Korea
Interests: reactivity; alkali-activated materials; silica fume; cement hydration; calcined clay; pozzolanic reaction; limestone; internal curing; superabsorbent polymer; rice husk ash; quartz powder; ultra-high performance concrete (UHPC); supplementary cementitious materials (SCMs); lime-based materials
Interests: reactivity; alkali-activated materials; silica fume; cement hydration; calcined clay; pozzolanic reaction; limestone; internal curing; superabsorbent polymer; rice husk ash; quartz powder; ultra-high performance concrete (UHPC); supplementary cementitious materials (SCMs); lime-based materials
Department of Metallurgy and Recycling, Faculty of Materials Engineering, Silesian University of Technology, Gliwice, Poland
Interests: hot dip galvanizing; coatings; corrosion resistacne; surface engeenering
Interests: hot dip galvanizing; coatings; corrosion resistacne; surface engeenering
Faculty of Civil Engineering, Wroclaw Unversity of Science and Technology, 50-421 Wroclaw, Poland
Interests: ceramics; building acoustics; concrete; building materials; masonry; civil engineering; gypsum; fire resistance; infill walls; ultrasound testing
Interests: ceramics; building acoustics; concrete; building materials; masonry; civil engineering; gypsum; fire resistance; infill walls; ultrasound testing
Civil Engineering Department, School of Engineering, Democritus University of Thrace, Xanthi, Greece
Interests: reinforced concrete structures; seismic design; strengthening; frp materials; seismic analysis; beam-column joints; steel fibers
Interests: reinforced concrete structures; seismic design; strengthening; frp materials; seismic analysis; beam-column joints; steel fibers
Department of Fundamentals of Machinery Design, Silesian University of Technology, Gliwice, Poland
Interests: rheology; fractals; fatigue and fracture; mathematical modeling; wavelets; technical diagnostics; mechanics of composites; electromagnetic interference; degradation of materials; lightning strike protection; non-destructive testing of engineering materials; electrically conductive materials; physical testing of composites; numerical simulations (FEM)
Interests: rheology; fractals; fatigue and fracture; mathematical modeling; wavelets; technical diagnostics; mechanics of composites; electromagnetic interference; degradation of materials; lightning strike protection; non-destructive testing of engineering materials; electrically conductive materials; physical testing of composites; numerical simulations (FEM)
Department of Orthopaedic Surgery, Kyoto University, Kyoto, Japan
Interests: orthopaedic implant; titanium metal; Surface treatment; bone formation; angiogenesis; biodegradable material; 3D printing; Total hip replacement
Interests: orthopaedic implant; titanium metal; Surface treatment; bone formation; angiogenesis; biodegradable material; 3D printing; Total hip replacement
