Reviewer Board
Members of the reviewer board are selected from all Materials reviewers for regularly providing timely high quality reports on submitted manuscripts. Responsibilities of reviewers are available here.
Members
Instituto Superior Técnico, University of Lisbon, Av. Rovisco Pais, 1049–001 Lisbon, Portugal
Interests: materials science; environmental impact; life cycle assessment; optimization; geopolymer concrete; construction and demolition waste; alkali-activated materials; supplementary cementitious materials; multi criteria analysis; green concrete; sustainable concrete and mortar; costs (economy)
Interests: materials science; environmental impact; life cycle assessment; optimization; geopolymer concrete; construction and demolition waste; alkali-activated materials; supplementary cementitious materials; multi criteria analysis; green concrete; sustainable concrete and mortar; costs (economy)
Department of Physical Chemistry and Technology of Polymers, Silesian University of Technology, Gliwice, Poland
Interests: biomaterials; biopolymers; mass spectrometry; pesticides; biodegradation; polyesters; transesterification; polyamides; anionic ring-opening polymerization; biopolyesters
Interests: biomaterials; biopolymers; mass spectrometry; pesticides; biodegradation; polyesters; transesterification; polyamides; anionic ring-opening polymerization; biopolyesters
Faculty of Materials Science and Ceramics, AGH University of Science and Technology, Krakow, Poland
Interests: cytotoxicity; biomaterials; polymers; surface modification; biopolymers; coatings; biocompatibility; surface functionalization; magnetron sputtering; titanium alloys; PVD; magnesium alloys; aluminum alloys; corrosion resistance; plasma technique; PA CVD; plasmochemical modifications; thin layers; DLC structure; mechanical and tribological properties; anti-wear coatings
Interests: cytotoxicity; biomaterials; polymers; surface modification; biopolymers; coatings; biocompatibility; surface functionalization; magnetron sputtering; titanium alloys; PVD; magnesium alloys; aluminum alloys; corrosion resistance; plasma technique; PA CVD; plasmochemical modifications; thin layers; DLC structure; mechanical and tribological properties; anti-wear coatings
Department of Telecommunication Engineering, Faculty of Electrical Engineering, Czech Technical University in Prague, Prague, Czech Republic
Interests: fixed access networks and technologies; transmission systems modeling; topology modeling; transmission media and topologies modeling; passive optical networks (PON)
Interests: fixed access networks and technologies; transmission systems modeling; topology modeling; transmission media and topologies modeling; passive optical networks (PON)
1. Engineering Structures, Delft University of Technology, Delft, The Netherlands
2. Colegio de Ciencias e Ingenierías, Universidad San Francisco de Quito, Ecuador
Interests: structural engineering; concrete structures; bridge engineering; steel fiber reinforced concrete
2. Colegio de Ciencias e Ingenierías, Universidad San Francisco de Quito, Ecuador
Interests: structural engineering; concrete structures; bridge engineering; steel fiber reinforced concrete
Department of Civil, Chemical and Environmental Engineering, University of Genoa, 1211 Genoa, Italy
Interests: nanotechnology; nano-structured materials; multi-functional compounds; nanoparticles synthesis; crystalline hybrid material; thin film polymer; non-aqueous sol-gel; sem; TEM; fabricated composites
Interests: nanotechnology; nano-structured materials; multi-functional compounds; nanoparticles synthesis; crystalline hybrid material; thin film polymer; non-aqueous sol-gel; sem; TEM; fabricated composites
School of Materials Science and Engineering, The University of New South Wales (UNSW), Syndey, Australia
Interests: heat treatment of non-ferrous and ferrous alloys; modifying the microstructure; phase transformation; tribology; metal matrix composites; metallic glasses; and nanoindentation; cocrmo implant alloys
Interests: heat treatment of non-ferrous and ferrous alloys; modifying the microstructure; phase transformation; tribology; metal matrix composites; metallic glasses; and nanoindentation; cocrmo implant alloys
Department of Applied Physics, National Pingtung University, Pingtung, Taiwan
Interests: sensors; thin films; materials characterization; semiconductors; atomic layer deposition; coating technologies; photoelectrical devices
Interests: sensors; thin films; materials characterization; semiconductors; atomic layer deposition; coating technologies; photoelectrical devices
Department of Structural Mechanics, Faculty of Civil Engineering VSB, Technical University of Ostrava, 17. Listopadu 15/2172, 708 33 Ostrava, Czech Republic
Interests: fatigue; steel; mechanics; numerical modeling; concrete; probability; degradation; reinforcement; hpc; chlorides; algorithmization; computational tasks; building mechanics
Interests: fatigue; steel; mechanics; numerical modeling; concrete; probability; degradation; reinforcement; hpc; chlorides; algorithmization; computational tasks; building mechanics
School of Chemical Engineering, University of New South Wales, Sydney, Australia
Interests: stimuli-responsive polymers; colloid and interfacial science and engineering; fire-retardant polymers; polymer-based MOF processing
Interests: stimuli-responsive polymers; colloid and interfacial science and engineering; fire-retardant polymers; polymer-based MOF processing
Technical University Gh. Asachi of Iasi, Romania
Faculty of Civil Engineering and Buildings Services
Civil Engineering Department
and
Technical University of Moldova: Chisinau, MD
Faculty of Urbanism and Architecture
Transport Infrastructure Engineering Department
Interests: civil engineering; eco-concrete, advanced functional material; energy and thermal bridges; process optimization; design of experiments; response surface method; artificial neural networks
Interests: civil engineering; eco-concrete, advanced functional material; energy and thermal bridges; process optimization; design of experiments; response surface method; artificial neural networks
Faculty of Mechanical Engineering, Wroclaw University of Science and Technology, Wrocław, Poland
Interests: fatigue; metals; fracture mechanics; failure analysis; fatigue fracture; degradation of metals
Interests: fatigue; metals; fracture mechanics; failure analysis; fatigue fracture; degradation of metals
Department of Materials Science and Non Ferrous Metals Engineering, Faculty of Non Ferrous Metals, AGH University of Science and Technology, 30 Mickiewicza Ave., 30059 Cracow, Poland
Interests: aluminium alloys; metal matrix composites; severe plastic deformation; microstructure examination; bearing alloys; tribological properties; heat treatment
Interests: aluminium alloys; metal matrix composites; severe plastic deformation; microstructure examination; bearing alloys; tribological properties; heat treatment
Innovative Durable Building and Infrastructure Research Center, Center for Creative Convergence Education, Hanyang University, Seoul, Republic of Korea
Interests: corrosion inhibition; analytical electrochemistry; corrosion of carbon steel and steel alloys; development of corrosion inhibitors for industrial material protection; density functional theory and molecular dynamics for corrosion
Interests: corrosion inhibition; analytical electrochemistry; corrosion of carbon steel and steel alloys; development of corrosion inhibitors for industrial material protection; density functional theory and molecular dynamics for corrosion
Center of Oral Implantology, Stomatological Hospital, Southern Medical University, Guangzhou 510280, China
Interests: dental materials; biomaterials; biodegradable metals; alloy; surface modification; dental implant; 3d printing; digital dentistry
Interests: dental materials; biomaterials; biodegradable metals; alloy; surface modification; dental implant; 3d printing; digital dentistry
Department of Structures for Engineering and Architecture, University of Naples Federico II, via Claudio 21, 80125 Napoli, Italy
Interests: fiber reinforced advanced materials for seismic strengthening of existing structures; FRP; FRCM; masonry; protection of cultural heritage; confinement; seismic vulnerability of masonry and reinforced concrete buildings; conservation engineering
Interests: fiber reinforced advanced materials for seismic strengthening of existing structures; FRP; FRCM; masonry; protection of cultural heritage; confinement; seismic vulnerability of masonry and reinforced concrete buildings; conservation engineering
Department of Fiber and Composite Materials, Feng Chia University, Taichung 407, Taiwan
Interests: composite; printing electronics; advanced material; machine learning; metamaterial; perovskite; liquid crystal; covalent organic frameworks; block copolymer
Interests: composite; printing electronics; advanced material; machine learning; metamaterial; perovskite; liquid crystal; covalent organic frameworks; block copolymer
Department of Mechanics and Strength of Materials, Politehnica University of Timisoara, 1 Mihai Viteazu Avenue, 300 222 Timisoara, Romania
Interests: porous materials; composites; fracture mechanics; additive manufacturing; 3D printing; microstructure; syntactic foams; experimental investigations; sandwich; polymeric foams; metalic foams
Interests: porous materials; composites; fracture mechanics; additive manufacturing; 3D printing; microstructure; syntactic foams; experimental investigations; sandwich; polymeric foams; metalic foams
School of Mechanical Engineering, Yanshan University, Qinhuangdao 066004, China
Interests: forming and properties of metals; porcess, structure and porperties of titanium-based and aluminium-based alloys; in-situ characterization by SEM or EBSD
Interests: forming and properties of metals; porcess, structure and porperties of titanium-based and aluminium-based alloys; in-situ characterization by SEM or EBSD
Department of Mechanical Engineering, South Ural State University (National Research University), 76, Lenin prospekt, 454080 Chelyabinsk, Russia
Interests: metal production technology; additive technology; metal forming; metal science
Interests: metal production technology; additive technology; metal forming; metal science
Institute for Polymers, Composites, and Biomaterials (IPCB), National Research Council (CNR), UOS Napoli/Portici, Piazzale Enrico Fermi 1, 80055 Portici, NA, Italy
Interests: Synthesis and characteritation of nanocomposites; Nanoparticles; graphene; graphene oxide; Morphological analysis by SEM, TEM; Structural characterization by XRD; Optical characterization by UV-Vis-NIR
Interests: Synthesis and characteritation of nanocomposites; Nanoparticles; graphene; graphene oxide; Morphological analysis by SEM, TEM; Structural characterization by XRD; Optical characterization by UV-Vis-NIR
Faculty of Chemical Sciences and Technologies, University of Castilla-La Mancha: Ciudad Real Campus, Avda. Camilo Jose Cela 10, 13071 Ciudad Real, Spain
Interests: nanomaterials; magnetic materials; thin films; multilayers; nanoparticles; magnetic properties
Interests: nanomaterials; magnetic materials; thin films; multilayers; nanoparticles; magnetic properties
Fracture & Structural Integrity Research Group, University of Salamanca, E.P.S., Campus Viriato, Avda. Requejo 33, 49022 Zamora, Spain
Interests: hydrogen embrittlement; fracture mechanics; finite element analysis; contact
Interests: hydrogen embrittlement; fracture mechanics; finite element analysis; contact
Institute of Materials Science and Technology, Faculty of Mechanical Engineering and Informatics, University of Miskolc, H-3515 Miskolc-Egyetemvaros, Hungary
Interests: welding; fracture mechanics; materials testing; metallic materials; structural integrity
Interests: welding; fracture mechanics; materials testing; metallic materials; structural integrity
National Institute for Research and Development in Electrical Engineering ICPE-CA, 313 Splaiul Unirii, 030138 Bucharest, Romania
Interests: biomaterials; nanostructured materials; product development; Powder Metallurgy; additive manufacturing; Mechanical Testing; thin films and coatings; spark plasma sintering; surface and coatings technology; uv-vis spectroscopy; dynamic light scattering; tribological testing; micro- and nanotechnologies; advanced materials (metals, oxides, alloys, composites); advanced manufacturing and processing
Interests: biomaterials; nanostructured materials; product development; Powder Metallurgy; additive manufacturing; Mechanical Testing; thin films and coatings; spark plasma sintering; surface and coatings technology; uv-vis spectroscopy; dynamic light scattering; tribological testing; micro- and nanotechnologies; advanced materials (metals, oxides, alloys, composites); advanced manufacturing and processing
Department of Mechanical and Aerospace Engineering, Tandon School of Engineering, New York University, 6 Metrotech Center, Brooklyn, NY 11201, USA
Interests: material science; molecular dynamics; composite materials; finite element method; numerical methods; material characterization; characterization; 3D printing; syntactic foams; light-weight materials
Interests: material science; molecular dynamics; composite materials; finite element method; numerical methods; material characterization; characterization; 3D printing; syntactic foams; light-weight materials
Department of General Dentistry, Medical University of Lodz, 251 Pomorska St, 92-213 Lodz, Poland
Interests: adhesion; polymer composites; dental materials; dental ceramics; prosthodontics; dentistry; ergonomics in dentistry
Interests: adhesion; polymer composites; dental materials; dental ceramics; prosthodontics; dentistry; ergonomics in dentistry
Bialystok University of Technology, Poland, 15-351 Bialystok, Wiejska 45c street
Interests: CAx; cad; uav design; fracture mechanics; lattice structure; lightweight design; stress-based structural optimization; topology optimization
Interests: CAx; cad; uav design; fracture mechanics; lattice structure; lightweight design; stress-based structural optimization; topology optimization
Department of General Dentistry, Medical University of Lodz, 251 Pomorska St., 92-213 Lodz, Poland
Interests: dental composites; dental adhesive systems; ceramic materials; acrylic resins; dental alloys; dentures; dental Implants; endodontic materials; endodontic instruments; antimicrobial properties; chemical properties; mechanical properties
Interests: dental composites; dental adhesive systems; ceramic materials; acrylic resins; dental alloys; dentures; dental Implants; endodontic materials; endodontic instruments; antimicrobial properties; chemical properties; mechanical properties
Thayer School of Engineering, Dartmouth College, Hanover, NH 03755, USA
Interests: surface severe plastic deformation; ultrasonic nanocrystal surface modification; additive manufacturing; metallic glasses; polymer composites; atomistic modeling; numerical modeling of composites mech
Interests: surface severe plastic deformation; ultrasonic nanocrystal surface modification; additive manufacturing; metallic glasses; polymer composites; atomistic modeling; numerical modeling of composites mech
