Reviewer Board
Members of the reviewer board are selected from all Materials reviewers for regularly providing timely high quality reports on submitted manuscripts. Responsibilities of reviewers are available here.
Members
Department of Civil Engineering, Shamoon College of Engineering, Ashdod, Israel
Interests: concrete properties and chemistry; n addition on a novel subject of ecological concrete interaction with the marine organisms
Interests: concrete properties and chemistry; n addition on a novel subject of ecological concrete interaction with the marine organisms
Imperial College London, Bessemer Building, South Kensington Campus, Exhibition Rd, Kensington, London SW7 2AZ, UK
Interests: raman spectroscopy; nanomaterials; SERS; cell matter interface; laser-mater interaction
Interests: raman spectroscopy; nanomaterials; SERS; cell matter interface; laser-mater interaction
Faculty of Electrical Engineering, University of West Bohemia, Univerzitni 8, 30100 Plzen, Czech Republic
Interests: reinforced soil; experimental study; geotechnical engineering; physical modelling; EPS; buried pipes; settlement; geocell; geogrid; geotextile; unenforced soil; triaxial; uniaxial
Interests: reinforced soil; experimental study; geotechnical engineering; physical modelling; EPS; buried pipes; settlement; geocell; geogrid; geotextile; unenforced soil; triaxial; uniaxial
Materials Science and Engineering Department, Idaho National Laboratory, Idaho Falls, ID 83415-2209, USA
Interests: laser
Interests: laser
Institute for Analysis and Scientific Computing, Vienna University of Technology (TU Wien), Wiedner Hauptstraße 8-10, 1040 Vienna, Austria
Interests: monte carlo; scientific computing; numerical analysis; bayesian
Interests: monte carlo; scientific computing; numerical analysis; bayesian
Prosthodontics and Dental Implantology Department, School of Dentistry, King Faisal University, Al-Ahsa, Saudi Arabia
Interests: dental biomaterials; bone graft; salivary diagnostics; periodontal membranes; oral antimicrobial peptides synthesis; gingival crevicular fluids (GCFs) proteome; platelet-rich proteins (PRPs) proteome; dental biomaterials proteomic analysis
Interests: dental biomaterials; bone graft; salivary diagnostics; periodontal membranes; oral antimicrobial peptides synthesis; gingival crevicular fluids (GCFs) proteome; platelet-rich proteins (PRPs) proteome; dental biomaterials proteomic analysis
Faculty of Applied Sciences, Ton Duc Thang University, HCMC 700000, Vietnam
Interests: conducting polymers; CNT; composites; actuators; sensors; polymers
Interests: conducting polymers; CNT; composites; actuators; sensors; polymers
Department of Advanced Materials and Technologies, Faculty of Materials Engineering, Silesian University of Technology, Gliwice, Poland
Interests: magnesium alloys; aluminium alloys; casting; microstructure; heat treatment; degradation; materials characterization
Interests: magnesium alloys; aluminium alloys; casting; microstructure; heat treatment; degradation; materials characterization
School of Integrative Engineering, Chung-Ang University, Seoul, Republic of Korea
Interests: biochips; biosensors; neurotransmitters; raman spectroscopy; nanomaterials; stem cells; electrochemical detection; pluripotency; differentiation; drug screening; organoids; nanopatterns
Interests: biochips; biosensors; neurotransmitters; raman spectroscopy; nanomaterials; stem cells; electrochemical detection; pluripotency; differentiation; drug screening; organoids; nanopatterns
Senior Researcher at MRD UNiT, National Technical University of Athens, Athens, Greece
Interests: synthesis (pechini, auto combustion, mechanochemical activation); structure and properties (thermal, electrical) of electro-ceramics; the chemistry and technology of alkali activated aluminosilicate binders (geopolymers); the recycling of waste materia; geopolymer; cementitious materials durability
Interests: synthesis (pechini, auto combustion, mechanochemical activation); structure and properties (thermal, electrical) of electro-ceramics; the chemistry and technology of alkali activated aluminosilicate binders (geopolymers); the recycling of waste materia; geopolymer; cementitious materials durability
Faculty of Mechanical Engineering, University of Ljubljana, Askerceva 6, SI-1000 Ljubljana, Slovenia
Interests: fatigue of metals; fatigue of polymers; fatigue and reliability of structures; strain-rate dependent material characteristics; materials testing; application of artificial intelligence for predicting a material response; mechanical characteristics of 3D printed materials and structures
Interests: fatigue of metals; fatigue of polymers; fatigue and reliability of structures; strain-rate dependent material characteristics; materials testing; application of artificial intelligence for predicting a material response; mechanical characteristics of 3D printed materials and structures
1. Department of Medical Imaging, University Hospital of Heraklion, Heraklion, Greece
2. Institute of Computer Science, Foundation for Research and Technology (FORTH), Heraklion, Greece
Interests: artificial intelligence; metabolomics; bone tissue engineering; mesenchymal stem cells; musculoskeletal imaging; MRI; Radiomics
2. Institute of Computer Science, Foundation for Research and Technology (FORTH), Heraklion, Greece
Interests: artificial intelligence; metabolomics; bone tissue engineering; mesenchymal stem cells; musculoskeletal imaging; MRI; Radiomics
Faculty of Civil Engineering, Warsaw University of Technology, al. Armii Ludowej 16, 00-637 Warsaw, Poland
Interests: concrete; prefabricated residential buildings; technical condition evaluation; predicting the time of use; progressive collapse; sustainable buildings; energy efficiency in buildings; precast prestressed elements; ANN
Interests: concrete; prefabricated residential buildings; technical condition evaluation; predicting the time of use; progressive collapse; sustainable buildings; energy efficiency in buildings; precast prestressed elements; ANN
"Microwave Magnetics" Laboratory, Institute of Electronics, Bulgarian Academy of Sciences, Sofia, Bulgaria
Interests: magnetic materials; ferroxide nanoparticles; hexaferrites; structural characterization; composite materials; microwave properties; magnetism; multiferroic materials; magnetic phase transition
Interests: magnetic materials; ferroxide nanoparticles; hexaferrites; structural characterization; composite materials; microwave properties; magnetism; multiferroic materials; magnetic phase transition
Lublin University of Technology
Interests: nanocomposites; composites; dielectric properties; electrical engineering; afm; tem; magnetic properties; electrical properties; structural properties; mössbauer spectroscopy
Interests: nanocomposites; composites; dielectric properties; electrical engineering; afm; tem; magnetic properties; electrical properties; structural properties; mössbauer spectroscopy
1. Metal Forming Department, National University of Science and Technology MISIS, Moscow, Russia
2. Laboratory of Plastic Deformation of Metal Materials, A. A. Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences, Moscow, Russia
Interests: composite materials; shape memory alloys; smart materials; nanostructure; thermomechanical treatment; ecap; severe plastic deformation; TiNi; titanium nickelide; metalforming
2. Laboratory of Plastic Deformation of Metal Materials, A. A. Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences, Moscow, Russia
Interests: composite materials; shape memory alloys; smart materials; nanostructure; thermomechanical treatment; ecap; severe plastic deformation; TiNi; titanium nickelide; metalforming
Department of Metals Technology and Aviation Materials, Samara National Research University, Samara, Russia
Interests: high-entropy alloys; alloys, structure, deformation, external energy effects
Interests: high-entropy alloys; alloys, structure, deformation, external energy effects
Institute of Fundamental Technological Research Polish Academy of Sciences
Pawinskiego 5B Street; 02-106 Warsaw, Poland
Interests: electron microscopy; mechanical properties; materials characterization; coatings; fatigue; materials; powder metallurgy; titanium alloys; mechanical testing; hot stamping; nickel alloys; SEM analysis; hot forming
Interests: electron microscopy; mechanical properties; materials characterization; coatings; fatigue; materials; powder metallurgy; titanium alloys; mechanical testing; hot stamping; nickel alloys; SEM analysis; hot forming
Faculty of Materials Engineering and Physics, Cracow University of Technology, Kraków, Poland
Interests: material characterization; mechanical properties; material testing; circular economy; composite; fly ash; geopolymer; 3D printing; additive manufacturing; fiber
Interests: material characterization; mechanical properties; material testing; circular economy; composite; fly ash; geopolymer; 3D printing; additive manufacturing; fiber
Faculty of Electrical, Electronic, Computer and Control Engineering, Lodz University of Technology, 90-924 Lodz, Poland
Interests: sensors; thin films; materials characterization; coating technologies; wearable electronics; physical vacuum deposition
Interests: sensors; thin films; materials characterization; coating technologies; wearable electronics; physical vacuum deposition
Faculty of Civil Engineering, University of Žilina, Univerzitná 8215/1, 010 26 Zilina, Slovakia
Interests: concrete bridges and structures; reliability of bridges and structures (new and old); using FRP materials and fibre reinforced concrete for strengthening; durability of bridges and structures
Interests: concrete bridges and structures; reliability of bridges and structures (new and old); using FRP materials and fibre reinforced concrete for strengthening; durability of bridges and structures
Faculty of Nuclear Sciences and Physical Engineering, Czech Technical University in Prague, Prague, Czech Republic
Interests: fatigue; fracture mechanics; thermal spray; scanning electron microscopy
Interests: fatigue; fracture mechanics; thermal spray; scanning electron microscopy
Dr. Aleksander Kowalski
Department of Metals Processing, Institute of Non-Ferrous Metals, Gliwice, Poland
Interests: additive manufacturing; microstructure; heat treatment; plastic deformation; lightweight alloys; copper alloys; pressure infiltration
Interests: additive manufacturing; microstructure; heat treatment; plastic deformation; lightweight alloys; copper alloys; pressure infiltration
Department of Technology and Entrepreneurship in Wood Industry, Warsaw University of Life Sciences – SGGW, 02-776 Warsaw, Poland
Interests: wood-based composite; fiber; panel; composite; glue; technology; cellulose
Interests: wood-based composite; fiber; panel; composite; glue; technology; cellulose
Institute of Solid State Physics, University of Latvia, Kengaraga Street 8, LV-1063 Riga, Latvia
Interests: material characterization; 3D printing; material-environment interaction; material structure-property relationships; mathematical modeling; polymers and composites; fibers; biomaterials; coatings; porous materials; sorbents
Interests: material characterization; 3D printing; material-environment interaction; material structure-property relationships; mathematical modeling; polymers and composites; fibers; biomaterials; coatings; porous materials; sorbents
The Szewalski Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Fiszera 14 St., 80-231 Gdansk, Poland
Interests: pvd coatings; stainless steels; carbon steels; cavitation erosion; dynamic fracture
Interests: pvd coatings; stainless steels; carbon steels; cavitation erosion; dynamic fracture
Kirensky Institute of Physics, Federal Research Center KSC SB RAS, Krasnoyarsk, Russia
Interests: phase transitions; Raman spectroscopy; temperature; ferroelectrics; crystals; high pressure
Interests: phase transitions; Raman spectroscopy; temperature; ferroelectrics; crystals; high pressure
Department of Structural Engineering, Silesian University of Technology, Gliwice, Poland
Interests: structural concrete; prestressed concrete; composites in construction; composite reinforcement; geopolymer concrete; use of waste materials in concrete; lightweight concrete; foamed concrete; mechanical behavior of structural materials; 3D printing in construction
Interests: structural concrete; prestressed concrete; composites in construction; composite reinforcement; geopolymer concrete; use of waste materials in concrete; lightweight concrete; foamed concrete; mechanical behavior of structural materials; 3D printing in construction
BTU Cottbus/Senftenberg Institute of Environmental Science, Chair of Biotechnology of Water Treatment, Cottbus-Senftenberg, Germany
Interests: chemical engineering; environmental engineering; photochemistry; biodegradation; wastewater treatment; water treatment; biofilms; LC/MS; photodegradation; phosphonates; ozon; persistent substances
Interests: chemical engineering; environmental engineering; photochemistry; biodegradation; wastewater treatment; water treatment; biofilms; LC/MS; photodegradation; phosphonates; ozon; persistent substances
Faculty of Chemistry, Nicolaus Copernicus University in Toruń, 7, Gagarina Street, 87-100 Torun, Poland
Interests: water treatment; hybrid materials; membrane distillation; ceramic membranes; functionalization; membrane modification
Interests: water treatment; hybrid materials; membrane distillation; ceramic membranes; functionalization; membrane modification
