Clean and Efficient Technology in Energy and the Environment

A special issue of Processes (ISSN 2227-9717). This special issue belongs to the section "Environmental and Green Processes".

Deadline for manuscript submissions: 31 December 2024 | Viewed by 7058

Special Issue Editors

Department of Chemistry, Faculty of Science, National University of Singapore, Singapore 117543, Singapore
Interests: biomass thermal-chemical conversion; catalytic reforming/ hydrogen; heavy metals removal and recovery

E-Mail Website
Guest Editor
School of Energy and Power Engineering, Huazhong University of Science and Technology, Wuhan 430074, China
Interests: biomass; pyrolysis; renewable energy; thermal reaction; photothermal; hydrothermal carbonization; CO2 capture; hydrogen production; carbon material

Special Issue Information

Dear Colleagues,

Today, the crises of energy shortages, environmental pollution, and climate change are the main challenges to human survival. Developing clean and efficient energy and environmental technologies is a crucial and hot research topic. This Special Issue welcomes related new ideas and papers. The recommended topics include, but are not limited to, the clean and efficient technologies of combustion, pyrolysis, gasification, hydrogen production, VOCs purification, and heavy metals treatment. 

Dr. Limo He
Prof. Dr. Song Hu
Guest Editors

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Processes is an international peer-reviewed open access monthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 2400 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Keywords

  • clean and efficient technology
  • combustion
  • pyrolysis
  • gasification
  • hydrogen production
  • VOCs purification
  • heavy metals treatment

Benefits of Publishing in a Special Issue

  • Ease of navigation: Grouping papers by topic helps scholars navigate broad scope journals more efficiently.
  • Greater discoverability: Special Issues support the reach and impact of scientific research. Articles in Special Issues are more discoverable and cited more frequently.
  • Expansion of research network: Special Issues facilitate connections among authors, fostering scientific collaborations.
  • External promotion: Articles in Special Issues are often promoted through the journal's social media, increasing their visibility.
  • e-Book format: Special Issues with more than 10 articles can be published as dedicated e-books, ensuring wide and rapid dissemination.

Further information on MDPI's Special Issue polices can be found here.

Published Papers (3 papers)

Order results
Result details
Select all
Export citation of selected articles as:

Research

Jump to: Review

11 pages, 957 KiB  
Article
Research on the Resource Treatment and Comprehensive Utilization of Carbon Containing Wastes Using Pyrolysis–Gasification Two-Stage Recycling
by Li Yang, Xiang Zhang, Shubin Yan and Yunxia Luo
Processes 2024, 12(2), 361; https://doi.org/10.3390/pr12020361 - 9 Feb 2024
Viewed by 954
Abstract
Carbon containing waste has a certain calorific value and utilization value due to the presence of carbon elements. However, the current treatment methods are mostly traditional landfill disposal, incineration, or expensive physical and chemical reaction methods, which clearly do not comply with the [...] Read more.
Carbon containing waste has a certain calorific value and utilization value due to the presence of carbon elements. However, the current treatment methods are mostly traditional landfill disposal, incineration, or expensive physical and chemical reaction methods, which clearly do not comply with the rules of the current clean and resource-saving society. In this paper, a new technology and system for carbon containing wastes is proposed, which comprehensively treats and recycles carbon containing wastes, including solid waste, wastewater, waste gas, etc., using pyrolysis–gasification two-stage-cycle technology. The calculation results indicate that the technical scheme proposed in this article is feasible and can achieve the recycling of intermediate and final products, the efficient and clean utilization of carbon containing waste, and the graded utilization of energy. The clean utilization rate of carbon containing waste can be effectively improved, the energy consumption and cost of separate treatments can be reduced, and zero waste emissions can be completely achieved by the comprehensive pyrolysis–gasification two-stage-cycle treatment and resource utilization technology, which is one of the preferred solutions for future resource-saving societies. Full article
(This article belongs to the Special Issue Clean and Efficient Technology in Energy and the Environment)
Show Figures

Figure 1

17 pages, 4711 KiB  
Article
Optimizing Energy and Reserve Minimization in a Sustainable Microgrid with Electric Vehicle Integration: Dynamic and Adjustable Manta Ray Foraging Algorithm
by Adnan Ajam Abed, Mahmood Sh. Suwaed, Ameer H. Al-Rubaye, Omar I. Awad, M. N. Mohammed, Hai Tao, Kumaran Kadirgama and Ali A. H. Karah Bash
Processes 2023, 11(10), 2848; https://doi.org/10.3390/pr11102848 - 27 Sep 2023
Cited by 3 | Viewed by 1497
Abstract
The growing presence of EVs in regional microgrids introduces increased variability and uncertainty in the areas’ load profiles. This paper presents a novel approach for optimizing energy and reserve minimization in a sustainable integrated microgrid with electric vehicles (EVs) by the use of [...] Read more.
The growing presence of EVs in regional microgrids introduces increased variability and uncertainty in the areas’ load profiles. This paper presents a novel approach for optimizing energy and reserve minimization in a sustainable integrated microgrid with electric vehicles (EVs) by the use of the dynamic and adjustable Manta Ray Foraging (DAMRF) algorithm. The DAMRF algorithm harnesses the inherent flexibility of EVs as controllable loads and develops a comprehensive dispatch model for a large-scale EV response. The model takes into account the management, operational, and environmental costs associated with load fluctuations in the microgrid. Simulation evaluations conducted based on a practical microgrid environment validate the effectiveness of our wind–solar energy storage and management strategy. The results showcase significant improvements in energy and reserve minimization, highlighting the potential advantages of integrating EVs into sustainable microgrid systems. In addition, the DAMRF algorithm achieves lower environmental pollution control costs (USD 8000) compared to the costs associated with the Genetic Algorithm (GA) (USD 8654.639) and PSO (USD 8579.546), emphasizing its ability to effectively control and minimize environmental pollution. In addition, the DAMRF algorithm offers a more cost-effective solution for managing the power grid, and the shorter solution running time of the DAMRF is almost the same as PSO’s quicker decision-making and response times, enhancing the overall responsiveness and adaptability of the power grid management system. Full article
(This article belongs to the Special Issue Clean and Efficient Technology in Energy and the Environment)
Show Figures

Figure 1

Review

Jump to: Research

25 pages, 2486 KiB  
Review
Review of Emission Characteristics and Purification Methods of Volatile Organic Compounds (VOCs) in Cooking Oil Fume
by Chong Tao, Limo He, Xuechen Zhou, Hanjian Li, Qiangqiang Ren, Hengda Han, Song Hu, Sheng Su, Yi Wang and Jun Xiang
Processes 2023, 11(3), 705; https://doi.org/10.3390/pr11030705 - 27 Feb 2023
Cited by 9 | Viewed by 4062
Abstract
Volatile organic compounds (VOCs) in cooking oil fumes need to be efficiently removed due to the significant damage they cause to the environment and human health. This review discusses the emission characteristics, which are influenced by different cooking temperatures, cooking oils, and cuisines. [...] Read more.
Volatile organic compounds (VOCs) in cooking oil fumes need to be efficiently removed due to the significant damage they cause to the environment and human health. This review discusses the emission characteristics, which are influenced by different cooking temperatures, cooking oils, and cuisines. Then, various cooking oil fume purification methods are mainly classified into physical capture, chemical decomposition, and combination methods. VOCs removal rate, system operability, secondary pollution, application area, and cost are compared. The catalytic combustion method was found to have the advantages of high VOC removal efficiency, environmental protection, and low cost. Therefore, the last part of this review focuses on the research progress of the catalytic combustion method and summarizes its mechanisms and catalysts. The Marse-van Krevelen (MVK), Langmuir-Hinshelwood (L-H), and Eley-Rideal (E-R) mechanisms are analyzed. Noble metal and non-noble metal catalysts are commonly used. The former showed excellent activity at low temperatures due to its strong adsorption and electron transfer abilities, but the high price limits its application. The transition metals primarily comprise the latter, including single metal and composite metal catalysts. Compared to single metal catalysts, the interaction between metals in composite metal catalysts can further enhance the catalytic performance. Full article
(This article belongs to the Special Issue Clean and Efficient Technology in Energy and the Environment)
Show Figures

Graphical abstract

Back to TopTop