Search Results (507)

Forest aboveground biomass (AGB) serves as a crucial indicator of productivity and carbon storage capacity. While the impact of stand structure on AGB is well-documented for pure moso bamboo stands, the specific structural factors influencing AGB and the mechanisms driving these effects in mixed moso bamboo forests, characterized by species diversity and structural complexity, require further elucidation. This study analyzed 9453 bamboos and arbor trees within the TianBao MetaPlot, which were tessellated into 108 standard plots in Tianbaoyan National Nature Reserve, Fujian, China. Using a multi-method voting approach, we identified the key structural factors influencing stand AGB and employed Partial Least Squares Path Modeling (PLS-PM) to assess their direct and indirect effects. We found that the stand density, moso bamboo mixing ratio, Shannon’s index, Simpson’s index, mean tree height, openness, and tree size variation coefficient were the key structural factors influencing the stand AGB. The PLS-PM analysis showed that stand density had a negative effect on stand AGB, which can be explicitly decomposed through a direct negative effect and an indirect negative effect. Tree diversity showed a strong positive effect, supporting the niche complementarity theory. The stand mean tree height and stand tree size variation had positive effects on stand AGB, while stand openness had a negative effect. The direct effects of tree diversity, stand mean tree height, and stand openness were stronger than the indirect effects on stand AGB, while the indirect effect of stand density was greater than the aforementioned effects. These results highlight the complex interactions between stand structure and stand AGB in mixed moso bamboo forests. The negative effect of stand density on stand AGB is in contrast with previous findings on arbor forests, wherein a higher stand density often promotes AGB, highlighting the unique structural characteristics of mixed moso bamboo forests. To promote biomass accumulation and enhance carbon sequestration in mixed moso bamboo stands, it is recommended to increase the tree size variability, enhance the tree species diversity, and apply rational thinning of moso bamboo, based on site-specific conditions. Full article

Recent studies have primarily focused on estimating forest above-ground biomass (AGB) at single time points, with limited attention to temporal changes. However, time-series remote sensing data offer valuable insights into biomass trends, drivers of change, and forest recovery following disturbance, deepening our understanding of forest dynamics. This review synthesized 166 studies published between 2010 and 2024 (15 years) on forest biomass changes or dynamics monitored through remote sensing, with an emphasis on temporal datasets and both indirect (83.7%) and direct (16.3%) methods for estimating AGB changes, as well as the key drivers of these changes. A meta-analysis of AGB change estimates revealed that 81.5% of studies operated at spatial resolutions below 100 m, while only a few studies addressed coarser scales. Notably, just 11.9% of the studies used independent validation, and 8.8% of studies reported no validation at all, underscoring the need for more rigorous accuracy assessment to ensure methodological reliability and ecological relevance. This review also discusses key challenges, limitations, and future directions for improved remote sensing-based AGB change monitoring. Full article

The Atlantic Forest has undergone deforestation and prolonged droughts, affecting ecosystem services. This study assesses the water balance using hydrological observations from representative tree species within a Montane Semideciduous Seasonal Forest (MF) remnant. Gross precipitation (GP), canopy interception (CI), and effective precipitation (EP = Throughfall + Stemflow) were recorded daily, and soil moisture was measured down to 1.80 m every two days during the dry period of the 2023/2024 hydrological year. Additionally, aboveground biomass (AGB), fresh root biomass (BR), and soil hydrological properties in the soil profile were obtained to support the water balance results. The highest EP values were recorded in Miconia willdenowii, while the lowest were in Xylopia brasiliensis. Root zone water storage exhibited a declining trend, with the highest values in Miconia willdenowii. ET remained low, mainly in April, July, and September, with Miconia willdenowii and Copaifera langsdorffii showing the highest values, and AGB correlated with CI and ET. The dynamic of this ecosystem is apparent in the temporal variations (CVt) of soil moisture, influenced by EP and ET. The greatest variability was recorded in the surface layer (0–20 cm), stabilizing with depth, especially below 120 cm. The Temporal Stability Index (TSI) of soil water storage indicated greater stability in Blepharocalyx salicifolius. This study highlights the significance of soil water storage and ET in a tropical forest ecosystem, particularly under drought conditions, suggesting potential species that may be more effective in recovering degraded areas. Full article

Forest aboveground biomass (AGB) serves as a crucial quantitative indicator that reflects the carbon sequestration capacity of forests, and accurately mapping AGB is pivotal for assessing forest ecosystem stability. However, mapping AGB in subtropical evergreen broadleaf forests in southern China presents challenges due to their complex canopy structure, stand heterogeneity, and spectral signal saturation. The phenological features reflecting seasonal vegetation dynamics are conducive to over-coming these challenges. By analyzing differential spectral reflectance patterns during the non-growing (Jan–Mar, Nov–Dec) versus growing (Apr–Oct) seasons, this study established a phenological feature-based methodology for improving AGB estimation in subtropical evergreen broadleaf forests. Subsequently, four time series vegetation indices (VI), namely NDVI, EVI2, NDPI, and IRECI were employed to extract phenological features (PFs) for mapping forest AGB using a multiple linear regression model (MLR), K-nearest neighbor model (KNN), support vector machine model (SVM), and random forest model (RF). The results demonstrated significant differences in Sentinel-2 spectral reflectance (740–1610 nm bands) between the growing and non-growing seasons. The PFs demonstrated the highest distance correlation coefficient (0.57), significantly outperforming other baseline feature types (0.44). Furthermore, seasonal changes in NDVI and NDPI were found to better reflect AGB accumulation in evergreen broadleaf forests compared to EVI2 and IRECI. Incorporating diverse PFs derived from all four VI significantly enhanced the accuracy of AGB mapping by yielding rRMSE values ranging from 21.01% to 25.06% and R² values ranging from 0.40 to 0.58. The results inferred that PFs can be considered a key factor for alleviating spectral signal saturation problems while effectively improving the accuracy of AGB estimation. Full article

Aboveground biomass (AGB) serves as a crucial indicator of the effectiveness of the Grain for Green Program (GGP), and its accurate estimation is essential for evaluating forest health and carbon sink capacity. However, due to the dominance of sparse forests in GGP stands, research in this area remains significantly limited. In this study, we developed the optimal tree height-diameter at breast height (DBH) growth models for major tree species and constructed a high-quality AGB sample dataset by integrating airborne LiDAR data and tree species information. Then, the AGB of the GGP stands was estimated using the Sentinel-2 data and the gradient boosting decision tree (GBDT) algorithm. The results showed that the AGB sample dataset constructed using the proposed approach exhibited strong consistency with field-measured data (R² = 0.89). The GBDT-based AGB estimation model shows high accuracy, with an R² of 0.96 and a root mean square error (RMSE) of 560 g/m². Key variables such as tasseled cap greenness (TCG), red-edge normalized difference vegetation index (RENDVI), and visible-band difference vegetation index (VDVI) were identified as highly important. This highlights that vegetation indices and tasseled cap transformation index information are key factors in estimating AGB. The AGB of major tree species in the new round of the GGP stands in Inner Mongolia ranged from 120 to 9253 g/m², with mean values of 978 g/m² for poplar, 622 g/m² for Mongolian Scots pine, and 313 g/m² for Chinese red pine species. This study offers a practical method for AGB estimation in GGP stands, contributing significantly to sustainable forest management and ecological conservation efforts. Full article

Accurate estimates of aboveground biomass (AGB) are essential for forest policies to reduce carbon emissions. Unmanned aerial laser scanning (UAV-LS) offers unprecedented millimetric detail but is underutilized in monitoring broadleaf Mediterranean forests compared to coniferous ones. This study aims to design and evaluate a procedure for AGB estimates based on the predictive power of crown features. In the first step, we manually created Quantitative Structure Models (QSMs) for 320 trees using data from UAV laser scanning (UAV-LS), airborne laser scanning (ALS), and co-registered terrestrial laser scanning (TLS). This provided the most accurate non-destructive estimate of aboveground biomass (AGB) in the absence of destructive measurements. For each reference tree we also measured crown projection and crown volume to build two separated models relating AGB to such crown features. In the second phase, we evaluated the potential of UAV-LS for quantifying AGB in a pure European beech (Fagus sylvatica) forest and compared it with traditional ALS estimates, using fully automatic procedures. The two obtained tree-level AGB models were then tested using three datasets derived from 35 sampling plots over the same study area: (a) 1130 trees manually segmented (phase-2 reference); (b) trees automatically extracted from ALS data; and (c) trees automatically extracted from UAV-LS data. Results demonstrate that detailed UAV-LS data improve model sensitivity compared to ALS data (RMSE = 45.6 Mg ha⁻¹, RMSE% = 13.4%, R2 = 0.65, for the best ALS model; RMSE = 44.0 Mg ha⁻¹, RMSE% = 12.9%, R2 = 0.67, for the best UAV-LS model), allowing for the detection of AGB differences even in quite homogenous forest structures. Overall, this study demonstrates the combined use of both laser scanner data can foster non-destructive and more precise AGB estimation than the use of only one, in forested areas across hectare scales (1 to 100 ha). Full article

Highland bamboo (Oldeania alpina) plays a vital role in supporting local livelihoods, fostering biodiversity conservation and sustainable land management. Despite these benefits, its significant potential for carbon sequestration remains underutilized within Ethiopia’s climate mitigation strategies. In this study, we developed site-specific allometric equations to assess the biomass and carbon storage potential of highland bamboo. Data were collected from the Garamba natural bamboo forest and Hula homestead bamboo stands in the Sidama Regional State, Southern Ethiopia. Data on stand density and structure were gathered using systematically laid transects and sample plots, while plant samples were analyzed in the laboratory to determine the dry-to-fresh weight ratios. We developed allometric models to estimate the aboveground biomass (AGB) and carbon stock. The study results indicated that homestead bamboo stands exhibited higher biomass accumulation than natural bamboo stands. The AGB was estimated at 92.3 Mg ha⁻¹ in the natural forest and 118.3 Mg ha⁻¹ in homestead bamboo stands, with total biomass carbon storage of 52.1 Mg ha⁻¹ and 66.7 Mg ha⁻¹, respectively. The findings highlight the significant potential of highland bamboo for carbon sequestration in both natural stands and homesteads. Sustainable management of natural highland bamboo stands and integrating bamboo into farms can contribute to climate change mitigation, support ecosystem restoration, and enhance the socio-economic development of communities. Full article

This study developed an integrated approach for estimating tropical forest aboveground biomass (AGB) by combining UAV–LiDAR structural metrics and Sentinel-2B spectral data, optimized through successive projections algorithm (SPA) feature selection and random forest (RF) regression. Field surveys across three tropical forest sites in Hainan Province (49 plots) provided ground-truth AGB measurements, while UAV–LiDAR (1 m resolution) and Sentinel-2B (10 m) data were processed to extract 98 and 69 features, respectively. The results showed that LiDAR-derived elevation metrics (e.g., percentiles and kurtosis) correlated strongly with the AGB measurements (r = 0.652–0.751), outperforming Sentinel-2B vegetation indices (max r = 0.520). SPA–RF models with selected features significantly improved accuracy compared to full-feature RF, achieving R² = 0.670 (LiDAR), 0.522 (Sentinel-2B), and 0.749 (coupled data), with the fusion model reducing errors by 46–54% in high-biomass areas. Despite Sentinel-2B’s spectral saturation limitations, its integration with LiDAR enhanced spatial heterogeneity representation, particularly in complex canopies. The 200-iteration randomized validation ensured a robust performance, with mean absolute relative errors of ≤0.071 for fused data. This study demonstrates that strategic multi-sensor fusion, coupled with SPA-optimized feature selection, significantly improves tropical AGB estimation accuracy, offering a scalable framework for carbon stock assessments in support of Reducing Emissions from Deforestation and Forest Degradation (REDD+) and climate mitigation initiatives. Full article

In Vietnam, models for estimating Above-Ground Biomass (AGB) to predict carbon stock are primarily based on diameter at breast height (DBH), tree height (H), and wood density (WD). However, remote sensing has increasingly been recognized as a cost-effective and accurate alternative. Within this context, the present study aimed to develop correlation equations between Total Above-Ground Carbon (TAGC) and vegetation indices derived from Sentinel-2 imagery to enable direct estimation of carbon stock for assessing emissions and removals. In this study, the remote sensing indices most strongly associated with TAGC were identified using principal component analysis (PCA). TAGC values were calculated based on forest inventory data from 115 sample plots. Regression models were developed using Ordinary Least Squares and Maximum Likelihood methods and were validated through Monte Carlo cross-validation. The results revealed that Normalized Difference Vegetation Index (NDVI), Soil Adjusted Vegetation Index (SAVI), and Near Infrared Reflectance (NIR), as well as three variable combinations—(NDVI, ARVI), (SAVI, SIPI), and (NIR, EVI — Enhanced Vegetation Index)—had strong influences on TAGC. A total of 36 weighted linear and non-linear models were constructed using these selected variables. Among them, the quadratic models incorporating NIR and the (NIR, EVI) combination were identified as optimal, with AIC values of 756.924 and 752.493, R² values of 0.86 and 0.87, and Mean Percentage Standard Errors (MPSEs) of 22.04% and 21.63%, respectively. Consequently, these two models are recommended for predicting carbon stocks in Evergreen Broadleaf (EBL) forests within Vietnam’s South Central Coastal Ecoregion. Full article

Forest ecosystems play a pivotal role in the global carbon cycle and climate change mitigation. Forest aboveground biomass (AGB), a critical indicator of carbon storage and sequestration capacity, has garnered significant attention in ecological research. Recently, uncrewed aerial vehicle-borne laser scanning (ULS) technology has emerged as a promising tool for rapidly acquiring three-dimensional spatial information on AGB and vegetation carbon storage. This study evaluates the applicability and accuracy of UAV-LiDAR technology in estimating the spatiotemporal dynamics of AGB and vegetation carbon storage in Robinia pseudoacacia (R. pseudoacacia) plantations in the gully regions of the Loess Plateau, China. At the sample plot scale, optimal parameters for individual tree segmentation (ITS) based on the canopy height model (CHM) were determined, and segmentation accuracy was validated. The results showed root mean square error (RMSE) values of 13.17 trees (25.16%) for tree count, 0.40 m (3.57%) for average tree height (AH), and 320.88 kg (16.94%) for AGB. The regression model, which links sample plot AGB with AH and tree count, generated AGB estimates that closely matched the observed AGB values. At the watershed scale, ULS data were used to estimate the AGB and vegetation carbon storage of R. pseudoacacia plantations in the Caijiachuan watershed. The analysis revealed a total of 68,992 trees, with a total carbon storage of 2890.34 Mg and a carbon density of 62.46 Mg ha⁻¹. Low-density forest areas (<1500 trees ha⁻¹) dominated the landscape, accounting for 94.38% of the tree count, 82.62% of the area, and 92.46% of the carbon storage. Analysis of tree-ring data revealed significant variation in the onset of growth decline across different density classes of plantations aged 0–30 years, with higher-density stands exhibiting delayed growth decline compared to lower-density stands. Compared to traditional methods based on diameter at breast height (DBH), carbon storage assessments demonstrated superior accuracy and scientific validity. This study underscores the feasibility and potential of ULS technology for AGB and carbon storage estimation in regions with complex terrain, such as the Loess Plateau. It highlights the importance of accounting for topographic factors to enhance estimation accuracy. The findings provide valuable data support for density management and high-quality development of R. pseudoacacia plantations in the Caijiachuan watershed and present an efficient approach for precise forest carbon sink accounting. Full article

This study presents a model for estimating forest productivity based on a sample of 2048 permanent field plots covering a wide range of growing sites in Mexico. Our state-space approach assumes that the growth behavior of any stand over time can be estimated on the basis of its current state, defined by the dominant height (H), number of trees per hectare (N), and stand basal area (BA). We used transition functions to estimate the change in states as a function of the current state. We also present transition functions for the change in stand volume (V) and total above-ground biomass (AGB). The first transition function relates dominant height to dominant diameter by using the guide-curve method to estimate site form. The transition function for N consists of two models, one for estimating natural mortality and the other for estimating recruitment. These models were developed in two steps: in the first step, the logistic regression and maximum likelihood approach were used to estimate the probability of the occurrence of mortality or recruitment, and in the second step, the rate of change associated with each event was modeled when mortality or recruitment was assumed to have occurred as a result of the first step. The remaining three transition functions (BA, V, and AGB) were fitted simultaneously to account for possible correlations between errors. The model estimating total above-ground biomass (AGB), which can be considered a state variable that summarizes the performance of the whole model, explained more than 97% of the observed variability, with a root mean square error value of 10.57 Mg/ha. Full article

Forests are invaluable natural resources that provide essential ecosystem services, and their carbon storage capacity is critical for climate mitigation efforts. Quantifying this capacity would require accurate estimation of forest structural attributes for deriving their aboveground biomass (AGB). Traditional field measurements, while precise, are labor-intensive and often spatially limited. Handheld Mobile Laser Scanning (HMLS) offers a rapid alternative for building forest inventories; however, its effectiveness and accuracy in diverse subtropical forests with complex canopy structure remain under-investigated. In this study, we employed both HMLS and traditional surveys within structurally complex subtropical forest plots, including old-growth forests (Fung Shui Woods) and secondary forests. These forests are characterized by dense understories with abundant shrubs and lianas, as well as high stem density, which pose challenges in Light Detection and Ranging (LiDAR) point cloud data processing. We assessed tree detection rates and extracted tree attributes, including diameter at breast height (DBH) and canopy height. Additionally, we compared tree-level and plot-level AGB estimates using allometric equations. Our findings indicate that HMLS successfully detected over 90% of trees in both forest types and precisely measured DBH (R² > 0.96), although tree height detection exhibited relatively higher uncertainty (R² > 0.35). The AGB estimates derived from HMLS were comparable to those obtained from traditional field measurements. By producing highly accurate estimates of tree attributes, HMLS demonstrates its potential as an effective and non-destructive method for rapid forest inventory and AGB estimation in subtropical forests, making it a competitive option for aiding carbon storage estimations in complex forest environments. Full article

The accurate estimation of forest aboveground biomass (AGB) is essential for effective forest resource management and carbon stock assessment. However, the estimation accuracy of forest AGB is often constrained by scarce in situ measurements and the limitations of using a single data source or retrieval model. This study proposes a multi-source data integration framework using Sentinel-1 (S-1) and Sentinel-2 (S-2) data along with eight predictive models (i.e., multiple linear regression—MLR; Elastic-Net; support vector regression (with a linear kernel and polynomial kernel); k-nearest neighbor; back-propagation neural network—BPNN; random forest—RF; and gradient-boosting tree—GBT). With airborne light detection and ranging (LiDAR)-derived AGB as a reference, a three-stage optimization strategy was developed, including stepwise feature selection (SFS), hyperparameter optimization, and multi-decision vector fusion (MDVF) model construction. Initially, the optimal feature subsets for each model were identified using SFS, followed by hyperparameter optimization through a grid search strategy. Finally, eight models were evaluated, and MDVF was implemented to integrate outputs from the top-performing models. The results revealed that LiDAR-derived AGB demonstrated a strong performance (R² = 0.89, RMSE = 20.27 Mg/ha, RMSE_r = 15.90%), validating its effectiveness as a supplement to field measurements, particularly in subtropical forests where traditional inventories are challenging. SFS could adaptively select optimal variable subsets for different models, effectively alleviating multicollinearity. Satellite-based AGB estimation using the MDVF model yielded robust results (R² = 0.652, RMSE = 31.063 Mg/ha, RMSE_r = 20.4%) through the synergy of S-1 and S-2, with R² increasing by 4.18–7.41% and the RMSE decreasing by 3.55–5.89% compared to the four top-performing models (BPNN, GBT, RF, MLR) in the second optimization stage. This study aims to provide a cost-effective and precise strategy for large-scale and spatially continuous forest AGB mapping, demonstrating the potential of integrating active and passive satellite imagery with airborne LiDAR to enhance AGB mapping accuracy and support further ecological monitoring and forest carbon accounting. Full article

Regional mapping of Above Ground Biomass Density (AGBD) using Remote Sensing data has shown high accuracy but lacks replicability at a global scale. In contrast, global models capture AGBD variability across biomes but struggle with biome-specific accuracy. To address this gap, we develop and assess the performance of a Deep Learning model for mapping AGBD at 10-m resolution using multi-source satellite data (Sentinel-1, Sentinel-2, ALOS PALSAR-2, and GEDI) across four biomes: Mediterranean, taiga (boreal forests), tropical rainforests, and semi-arid savannas. The model is trained and validated separately for each biome, yielding four regional models with normalized RMSEs of 0.43–0.67 and correlation coefficients (r) of 0.61–0.77 against forest inventories. We compare predictions from these models to a benchmark dataset and to a model trained on all four biomes combined. The regional models consistently outperform both, achieving better metrics than the benchmark. Additionally, an analysis of prediction drivers reveals biome-specific differences, reinforcing the importance of per-biome mapping approaches. This study highlights the advantages and limitations of regional against global modeling, creating the basis for biome-specific, replicable, scalable and multi-temporal AGBD mapping. Full article

It has been well observed that accurate estimation of the aboveground biomass (AGB) of mangrove forests is critical for evaluating ecosystem health, carbon sink capacity, and sustainable development. This study utilizes UAV-LiDAR data and field measurements to develop an AGB inversion model based on 26 feature variables. We employed three machine learning algorithms—random forest (RF), extreme gradient boosting (XGBoost), and support vector machine (SVM)—to estimate mangrove AGB in the Xinyingwan region of Lingao County, Hainan Province, China. The key findings include that: (1) the SVM algorithm demonstrated the highest predictive accuracy, with an R² of 0.8853 and RMSE of 0.4766 kg/m², making it most suitable for this study; (2) the proposed zero-importance feature selection method based on mutual information (MI) outperformed traditional techniques, selecting more effective variables for model development; (3) in the SVM model, variables selected using the zero-importance feature selection method based on MI yielded the best prediction accuracy; and (4) the estimated AGB in the study area ranged from 1.97 to 5.23 kg/m², with an average of 3.83 kg/m². This study not only provides valuable data for mangrove ecosystem conservation and restoration but also offers a scientific basis and technical framework for future biomass estimation and carbon stock assessments. Full article