Search Results (134)

Polyvinyl alcohol (PVA), a water-soluble, biodegradable, and biocompatible polymer, has garnered significant attention in recent years for its applications such as packaging, electronics, biomedical materials, and water treatment. However, its high flammability poses a substantial limitation in fire-sensitive environments. To address this challenge, significant research efforts have been devoted to improving the flame retardancy and suppressing the smoke toxicity of PVA through various strategies. This review presents diverse modification strategies that have been developed for PVA, including physical blending with polymers and nanofillers, chemical modifications such as esterification, acetalization, and crosslinking, and advanced surface engineering techniques such as plasma treatment, layer-by-layer assembly, and surface grafting. Beyond fire safety, these modifications enable multifunctional applications, expanding PVA use in optical, energy, sensing, and biomedical fields. Finally, this review explores current challenges, environmental considerations, and future directions for the development of sustainable, high-performance flame-retardant PVA systems. Full article

The present work analyzes the combined viscoelectric and steric effects on electroosmotic flow in a soft channel with polyelectrolyte coating. The structured channel surface, which controls the electric potential, creates two different flow regions: the electrolyte flow within the permeable polyelectrolyte layer (PEL) and the bulk electrolyte. Thus, this study discusses the interaction of various electrostatic effects to predict the electroosmotic flow field. The nonlinear governing equations describing the fluid flow are the modified Poisson–Boltzmann equation for the electric potential distribution, the mass conservation equation, and the modified Navier–Stokes equations for the flow field, which are solved numerically using a one-dimensional (1D) scheme. The results indicate that the flow enhances when increasing the electric potential magnitude across the channel cross-section via the rise in different dimensionless parameters, such as the PEL thickness, the steric factor, and the ratio of the electrokinetic parameter of the PEL to that of the electrolyte layer. This research demonstrates that the PEL significantly enhances control over electroosmotic flow. However, it is crucial to consider that viscoelectric effects at high electric fields and the friction generated by the grafted polymer brushes of the PEL can reduce these benefits. Full article

Bisphenol S (BPS), a key ingredient in polycarbonate plastics and epoxy resins, is a known endocrine-disrupting compound that poses significant risks to human health and the environment. As such, the development of rapid and reliable analytical techniques for its detection is essential. In this work, we present a newly engineered electrochemical sensor designed for the sensitive and selective detection of BPS using a straightforward and effective fabrication approach. The sensor was constructed by grafting molecularly imprinted polymers (MIPs) onto vinyl-functionalized multiwalled carbon nanotubes (f-MWCNTs). Ethylene glycol dimethacrylate and acrylamide were used as the cross-linker and functional monomer, respectively, in the synthesis of the MIP layer. The resulting MIP@f-MWCNT nanocomposite was characterized using Fourier-transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM). The MIP@f-MWCNT material was then combined with chitosan, a biocompatible binder, to fabricate the final MIP@f-MWCNT/chitosan-modified glassy carbon electrode (GCE). Electrochemical evaluation showed a broad linear detection range from 1 to 60 µM (R² = 0.992), with a sensitivity of 0.108 µA/µM and a detection limit of 2.00 µM. The sensor retained 96.0% of its response after four weeks and exhibited high selectivity against structural analogues. In spiked plastic extract samples, recoveries ranged from 95.6% to 105.0%. This robust, cost-effective, and scalable sensing platform holds strong potential for environmental monitoring, food safety applications, and real-time electrochemical detection of endocrine-disrupting compounds like BPS. Full article

Ti6Al4V alloy is one of the most widely used orthopedic implants due to its low density, high strength and good biocompatibility, but surface tribology limits its service life and performance. In this paper, a layer of dynamic double-network hydrogel based on a Schiff base bond and a hydrogen bond was grafted on the surface of Ti6Al4V alloy by the mussel chemical self-assembly method. The -NH₂ of acrylamide (AM) and -CHO of vanillin (VA) formed Schiff base bonds to form the first layer of a cross-linked network, a large number of hydrogen bonds were formed between the -OH of vanillin and the -OH of sodium alginate (SA) to provide the second layer of the cross-linked network and the network was properly regulated by introducing core–shell polymer nanoparticles (PDCS). Dynamic self-healing bonds, Schiff base bonds and hydrogen bonds endow qPDCS/SA/VA/AM hydrogels with self-healing ability, and the network structure destroyed under high strain (250%) can be rebuilt under low strain (1%). In the second cycle, G’ and G can recover almost the same value. PDCS/SA/VA/AM hydrogel coating can achieve dynamic repair through reversible Schiff base bond dissociation–recombination during friction, while 1000ppmPDCS/SA/VA/AM hydrogel coating can achieve stable friction reduction and low wear under multiple loads. Under 0.5 N load, the average friction coefficient of 1000ppmPDCS/SA/VA/AM hydrogel coating is as low as 0.157, which is 67.74% lower than the uncoated Ti6Al4V surface under the same load. Under 2 N load, 1000ppmPDCS/SA/VA/AM hydrogel coating remains stable and low-friction, and the average coefficient of friction (ACOF) can reach 0.130, which is 59.27% lower than the uncoated Ti6Al4V surface under the same load. The design idea of the hydrogel network regulated by core–shell polymer nanoparticles (PDCS) to achieve low friction and low wear provides a new strategy for biolubricating materials. Full article

This comprehensive review systematically explores the molecular design and functional applications of nano-smooth hydrophilic ionic polymer surfaces. Beginning with advanced fabrication strategies—including plasma treatment, surface grafting, and layer-by-layer assembly—we critically evaluate their efficacy in eliminating surface irregularities and tailoring wettability. Central to this discussion are the types of ionic groups, molecular configurations, and counterion hydration effects, which collectively govern macroscopic hydrophilicity through electrostatic interactions, hydrogen bonding, and molecular reorganization. By bridging molecular-level insights with application-driven design, we highlight breakthroughs in oil–water separation, anti-fogging, anti-icing, and anti-waxing technologies, where precise control over ionic group density, the hydration layer’s stability, and the degree of perfection enable exceptional performance. Case studies demonstrate how zwitterionic architectures, pH-responsive coatings, and biomimetic interfaces address real-world challenges in industrial and biomedical settings. In conclusion, we synthesize the molecular mechanisms governing hydrophilic ionic surfaces and identify key research directions to address future material challenges. This review bridges critical gaps in the current understanding of molecular-level determinants of wettability while providing actionable design principles for engineered hydrophilic surfaces. Full article

Nanocomposite hydrogels are gaining significant attention for biomedical applications in soft tissue engineering due to the increasing demand for highly flexible and durable soft polymer materials. This research paper focused on investigating and optimizing a procedure for the development of novel nanocomposite hydrogels based on poly(2-hydroxyethyl methacrylate)-co-(2-acrylamido-2-methylpropane sulfonic acid) (HEMA/AMPSA) copolymers. These hydrogels were synthesized through a grafting-through process, where the polymer network was formed using a modified clay crosslinker. The layered double hydroxide (LDH) clay modified with 3-(trimethoxysilyl)propyl methacrylate (ATPM) was synthesized using a novel recipe through a two-step procedure. The nanocomposite hydrogel compositions were optimized to achieve soft hydrogels with high flexibility. The developed materials were analyzed for their mechanical and morphological properties using tensile and compressive tests, transmission electron microscopy (TEM), scanning electron microscopy (SEM), and micro-computed tomography (micro-CT). The swelling behavior, network density, and kinetic diffusion mechanism demonstrated the specific characteristics of the materials. The modified LDH-ATPM was further characterized using Thermogravimetry (TGA), FTIR-ATR and X-ray diffraction (XRD). Biological assessments on human adipose-derived stem cells (hASCs) were essential to evaluate the biocompatibility of the nanocomposite hydrogels and their potential for soft tissue applications. Full article

Poor water solubility remains a significant challenge in the pharmaceutical industry that limits the therapeutic efficacy and bioavailability of many active pharmaceuticals. Soluplus^® (SLP), an amphiphilic graft copolymer made of polyethylene glycol, polyvinyl caprolactam, and polyvinyl acetate, has been gaining interest in recent years as it addresses these limitations by acting as a versatile carrier. Its ability to form stable amorphous dispersions and enhance drug solubility, as well as its physicochemical properties, support its role as a key excipient in advanced drug delivery systems. Recent investigations have demonstrated the adaptability of SLP in addressing drug delivery requirements, offering controlled release, improved targeting, and superior therapeutic outcomes. This review examines some key formulation methods that make use of SLP, including hot-melt extrusion, spray drying, electrospinning, drug–polymer layering, and capsule and tablet formulations, highlighting the capacity of SLP to overcome formulation challenges. Biomedical applications of SLP have also been explored, with a focus on its role in improving the delivery of antitumoral, anti-inflammatory, antimicrobial, and antiparasitic drugs. Full article

Tissue engineering has emerged as a promising approach for improved regeneration of native tissue and could increase the quality of life of many patients. However, the treatment of injured tissue transitions is still in its early stages, relying primarily on a purely physical approach in medical surgery. A biodegradable implant with a modified surface that is capable of biological active protein delivery via a nanoparticulate release system could advance the field of musculoskeletal disorder treatments enormously. In this study, interconnected 3D macroporous scaffolds based on Polycaprolactone (PCL) were fabricated in a successive process of blending, annealing and leaching. Blending with varying parts of Polyethylene oxide (PEO), NaCl and (powdered) sucrose and altering processing conditions yielded scaffolds with a huge variety of morphologies. The resulting unmodified hydrophobic scaffolds were modified using two graft polymers (CS-g-PCL_x) with x = 29 and 56 (x = PCL units per chitosan unit). Due to the chitosan backbone hydrophilicity was increased and a platform for a versatile nanoparticulate release system was introduced. The graft polymers were synthesized via ring opening polymerization (ROP) of ε-Caprolactone using hydroxy groups of the chitosan backbone as initiators (grafting from). The suspected impact on biocompatibility of the modification was investigated by in vitro cell testing. In addition, the CS-g-PCL modification opened up the possibility of Layer by Layer (LbL) coating with alginate (ALG) and TGF-β₃-loaded chitosan tripolyphosphate (CS-TGF-β₃-TPP) nanoparticles. The subsequent release study showed promising amounts of growth factor released regarding successful in vitro cell differentiation and therefore could have a possible therapeutic impact. Full article

Si anode materials are promising candidates for next-generation Li-ion batteries (LIBs) because of their high capacities. However, expansion and low conductivity result in rapid performance degradation. Herein, we present a facile one-pot method for pyrolyzing polystyrene sulfonate (PSS) polymers at low temperatures (≤400 °C) to form a thin carbonaceous layer on the silicon surface. Specifically, micron silicon (mSi) was transformed into porous mSi (por-mSi) by a metal-assisted chemical etching method, and a phenyl-based thin film derived from the thermolysis of PSS formed a strong Si–C/Si–O–C covalent bonding with the Si surface, which helped maintain stable cycle performance by improving the interfacial properties of mSi. Additionally, PSS-grafted por-mSi (por-mSi@PSS) anode was coated with polyaniline (PANI) for endowing additional electrical conductivity. The por-mSi@PSS/PANI anode demonstrated a high reversible capacity of ~1500 mAh g⁻¹ at 0.1 A g⁻¹ after 100 cycles, outperforming or matching the performance reported in recent studies. A thin double layer composed of phenyl moieties and a conductive PANI coating improved the stability of Si-based anodes and provided an effective pathway for Li⁺ ion transport to the Si interface, suggesting that polymer-modified Si anodes hold significant promise for advanced LIB applications. Full article

Despite the remarkable progress in the modification and application of polyvinyl chloride (PVC), developing processing aids for the induced crystallization of PVC and characterizing its interfacial layer remain challenges. Herein, we propose a new polymeric nucleating agent, polyamidea12-graft-styrene–maleic anhydride copolymer (PA12-g-SMA), which possesses high compatibility and crystallinity, effectively improving the crystallinity to 15.1%, the impact strength to 61.03 kJ/m², and the degradation temperature of PVC to 267 °C through a single and straightforward processing step. Additionally, after the introduction of two different fluorescent sensors in PA12-g-SMA and PVC, the interfacial layer of the induced crystallization can be monitored in situ via a confocal laser scanning microscope (CLSM). This study highlights a rare strategy for significantly enhancing the physical properties of rigid PVC through simply adding a polymeric nucleating agent during processing, while also emphasizing the importance of visualizing the interfacial layer to understand various polymer crystallization processes. Full article

We studied the properties of a reaction front that forms in irreversible reaction–diffusion systems with concentration-dependent diffusivities during the synthesis of polymer brushes. A coarse-grained model of the polymerization process during the formation of polymer brushes was designed and investigated for this purpose. In this model, a certain amount of initiator was placed on an impenetrable surface, and the “grafted from” procedure of polymerization was carried out. The system consisted of monomer molecules and growing chains. The obtained brush consisted of linear chains embedded in nodes of a face-centered cubic lattice with excluded volume interactions only. The simulations were carried out for high rafting densities of 0.1, 0.3, and 0.6 and for reaction probabilities of 0.02, 0.002, and 0.0002. Simulations were performed by means of the Monte Carlo method while employing the Dynamic Lattice Liquid model. Some universal behavior was found, i.e., irrespective of reaction rate and grafting density, the width of the reaction front as well as the height of the front show for long times the same scaling with respect to time. During the formation of the polymer layer despite the observed difference in dispersion of chain lengths for different grafting densities and reaction rates at a given layer height, the quality of the polymer layer does not seem to depend on these parameters. Full article

This work presents a facile way to fabricate a polymer/ceramics composite gel electrolyte to improve the overall properties of lithium-ion batteries. Lithium salt-grafted silica was synthesized and mixed with P(VDF-HFP) to produce a nanofiber film by the electrostatic spinning method. After coating a layer of SiO₂ onto the surface of nanofibers through a sol-gel method, a composite nanofiber film was obtained. It was then immersed in plasticizer until saturation to make a composite gel electrolyte film. Electrochemical test results showed that the obtained gel electrolyte film shows high thermal stability (~450 °C), high ionic conductivity of 1.3 × 10⁻³ S cm⁻¹ at 25 °C and a lithium-ion transference number of 0.58, and superior cycling stability, providing a new direction for manufacturing secondary batteries with higher safety and performance. Full article

A novel elastomer-modified multicomponent, multiphase waste-sourced biocomposites, was prepared for converting waste biomass and plastic into value-added products. The effects of blending elastomer–olefin block copolymer (OBC) and maleic anhydride (MAH), and divinylbenzene (DVB) co-grafting of recycled polypropylene (rPP) matrix on the adhesion interface, structure, and properties of high wood flour-filled (60 wt.%) composites were thoroughly investigated. The results indicated that DVB introduced branched structures into the polymer matrix molecular chain and increased the MAH grafting rate. Co-grafting rPP/OBC blends enhanced the interfacial adhesion among rPP, OBC, and wood flour. Additionally, MAH-grafted OBC was prone to encapsulating rigid wood flour, thereby forming an embedded structure. Notably, the tensile modulus and impact strength of the final three-component composites increased by 60% and 125%, respectively, compared with the unmodified composites. Additionally, dynamic mechanical analysis revealed that DVB-induced branching promoted the formation of microvoids in the OBC shell layer surrounding the wood, which in turn induced significant plastic deformation in the polymer matrix. This work offers a facile and efficient method for preparing high-toughness, high-stiffness, and low-cost waste PP-based composites for automotive interiors, and indoor and outdoor decoration. Full article

Over the past two decades, the development and commercialization of slow-release fertilizers (SRFs) have significantly advanced, with the primary aim of mitigating environmental issues associated with excessive fertilizer use. A range of methodologies, including chemical and physical reactions, incorporation into carriers with porous and layered structures, and coating techniques, have been explored and refined. On the other hand, global challenges such as drought and desertification further underscore the need for SRFs that not only control nutrient release but also improve soil moisture retention. This paper reviews the development and application of eco-friendly starch hydrogels as fertilizer carriers and water retention for SRFs, particularly starch-based superabsorbent polymers (SAPs) produced through grafting copolymerization with acrylamide. This review explores both scientific issues, such as the microstructures and releasing mechanisms of SAPs, and technical development, involving copolymerization technologies, multi-initialization processes, methods of loading fertilizer into hydrogel, etc. Starch, as both a biodegradable and renewable carbohydrate polymer, offers distinct advantages due to its excellent chemical stability and high reactivity. The fabrication techniques of SAPs have been developed from traditional batch polymerization in aqueous solutions to more efficient, solvent-free reactive extrusion. The benefits of SRFs based on SAPs encompass enhanced soil aeration, the prevention of soil deterioration, the minimization of water evaporation, environmental pollution control, reduction in plant mortality, and prolonged nutrient retention within soil. In this review, we summarize the current progress, identify limitations in existing technologies, and propose future research directions to further enhance the performance of starch-based SRFs. Full article

Silica (SiO₂) particles are widely used in various industries due to their chemical inertness, thermal stability, and wear resistance. The present study describes the preparation and potential use of porous hydrophobic and hydrophilic SiO₂ microcapsules (MCs) of a narrow size distribution. First, various layers of SiO₂ micro/nano-particles (M/NPs) were grafted onto monodispersed polystyrene (PS) microspheres of a narrow size distribution. Hydrophobic and hydrophilic sintered SiO₂ MCs were then prepared by removing the core PS from the PS/SiO₂ core–shell microspheres by burning off under normal atmospheric conditions or organic solvent dissolution, respectively. We examined how the size and quantity of the SiO₂ M/NPs influence the MC’s properties. Additionally, we utilized two forms of hollow SiO₂ MC for different applications; one form was incorporated into polymer films, and the other was free-floating. The hydrophobic microcapsules filled with 6% hydrogen peroxide were effective in killing the tomato brown rugose fruit virus (ToBRFV). The hydrophilic microcapsules filled with thymol and thin coated onto polypropylene films were successfully used to prevent mold formation for hay protection. Full article