Next Article in Journal
Investigation of Using Calcined Coal Gangue as the Co-Blended Precursor in the Alkali-Activated Metakaolin
Previous Article in Journal
A Novel Wedge Anchor System for Double-Layer CFRP Plate Cables: Concept, Theoretical Analysis and FEA
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Correction

Correction: Hong et al. Textile-Based Adsorption Sensor via Mixed Solvent Dyeing with Aggregation-Induced Emission Dyes. Materials 2024, 17, 1745

1
Department of Advanced Materials Engineering for Information and Electronics, Integrated Education Institute for Frontier Science and Technology (BK21 Four), Kyung Hee University, 1732 De-ogyeong-daero, Giheung-gu, Yongin-si 17104, Gyeonggi-do, Republic of Korea
2
Department of Molecular Science and Technology, Ajou University, 206, World Cup-ro, Yeongtong-gu, Suwon-si 16499, Gyeonggi-do, Republic of Korea
*
Author to whom correspondence should be addressed.
Materials 2024, 17(14), 3609; https://doi.org/10.3390/ma17143609
Submission received: 26 June 2024 / Accepted: 3 July 2024 / Published: 22 July 2024
In the original publication [1], there was a small mistake in the molecular structure of Figure 1 and Figure 2, so it was corrected. The original figures will now be replaced by the following Figure 1 and Figure 2. The authors state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.

Reference

  1. Hong, S.G.; Oh, B.M.; Kim, J.H.; Lee, J.U. Textile-Based Adsorption Sensor via Mixed Solvent Dyeing with Aggregation-Induced Emission Dyes. Materials 2024, 17, 1745. [Google Scholar] [CrossRef] [PubMed]
Figure 1. Schematic diagram of the sensing mechanism of AIE-dyed fabric.
Figure 1. Schematic diagram of the sensing mechanism of AIE-dyed fabric.
Materials 17 03609 g001
Figure 2. Synthetic procedure of CN-TFPA.
Figure 2. Synthetic procedure of CN-TFPA.
Materials 17 03609 g002
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Hong, S.G.; Oh, B.M.; Kim, J.H.; Lee, J.U. Correction: Hong et al. Textile-Based Adsorption Sensor via Mixed Solvent Dyeing with Aggregation-Induced Emission Dyes. Materials 2024, 17, 1745. Materials 2024, 17, 3609. https://doi.org/10.3390/ma17143609

AMA Style

Hong SG, Oh BM, Kim JH, Lee JU. Correction: Hong et al. Textile-Based Adsorption Sensor via Mixed Solvent Dyeing with Aggregation-Induced Emission Dyes. Materials 2024, 17, 1745. Materials. 2024; 17(14):3609. https://doi.org/10.3390/ma17143609

Chicago/Turabian Style

Hong, Seong Gyun, Byeong M. Oh, Jong H. Kim, and Jea Uk Lee. 2024. "Correction: Hong et al. Textile-Based Adsorption Sensor via Mixed Solvent Dyeing with Aggregation-Induced Emission Dyes. Materials 2024, 17, 1745" Materials 17, no. 14: 3609. https://doi.org/10.3390/ma17143609

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop