Search Results (775)

The development of safe, cost-effective, and environmentally friendly energy storage systems has spurred growing interest in aqueous ZIBs. However, the poor cycling stability of cathode materials—mainly due to manganese dissolution and structural degradation—remains a major bottleneck. In this work, a porous MnO₂/PPy hybrid nanocomposite is successfully synthesized via an in situ co-precipitation strategy. The conductive PPy buffer layer not only alleviates Mn dissolution and buffers volume expansion during cycling but also enhances ion/electron transport and facilitates electrolyte infiltration due to its high surface area. Electrochemical evaluation reveals that the MnO₂/PPy electrode delivers excellent cycling stability, retaining 75% of its initial capacity after 1000 cycles at a current density of 1 A·g⁻¹. Comparative performance analysis shows that MnO₂/PPy exhibits superior capacity retention and rate capability, especially under high current densities and prolonged cycling. These results underscore the effectiveness of the PPy interfacial layer in improving structural integrity and electrochemical performance, offering a promising route for designing high-performance cathode materials for aqueous ZIBs. Full article

In the development of flexible smart electronics, fabricating electrodes with optimized architectures to achieve superior electrochemical performance remains a significant challenge. This study presents a two-step synthesis and characterization of a polypyrrole (PPy)-MnO₂/carbon cloth (CC) nanocomposite. The MnO₂/CC substrate was first prepared via the hydrothermal method, followed by uniform PPy coating through vapor-phase polymerization in the presence of an oxidizing agent. Electrochemical measurements revealed substantial enhancement in performance, with the specific capacitance increasing from 123.1 mF/cm² for the MnO₂/CC composite to 324.5 mF/cm² for the PPy/MnO₂/CC composite at a current density of 2.5 mA/cm². This remarkable improvement can be attributed to the synergistic effects between the conductive PPy polymer and MnO₂/CC substrate and the formation of additional ion transport channels facilitated by the PPy coating. This work provides valuable insights for designing high-performance electrode materials and advances the development of composite-based energy storage devices. Full article

Organic hybrid materials are gaining traction as electrode candidates for energy storage due to their structural tunability and environmental compatibility. This study investigates polyimide/carbon nanotube/polypyrrole (PI/CNTs/PPy) hybrid nanocomposites, focusing on the correlation between thermal imidization temperature, polypyrrole deposition time, and the resulting electrochemical properties. By modulating PI processing temperatures (90 °C, 180 °C, 250 °C) and PPy deposition durations (60–700 s), this research uncovers critical structure–function relationships governing charge storage behavior. Scanning electron microscopy and electrochemical impedance spectroscopy reveal that low-temperature imidization preserves porosity and enables ion-accessible pathways, while moderate PPy deposition enhances electrical conductivity without blocking pore networks. The optimized composite, processed at 90 °C with 60 s PPy deposition, demonstrates superior specific capacitance (850 F/g), high redox contribution (~70% of total charge), low charge transfer resistance, and enhanced energy/power density. In contrast, high-temperature processing and prolonged PPy deposition result in structural densification, increased resistance, and diminished performance. These findings highlight a synergistic design approach that leverages partial imidization and controlled doping to balance ionic diffusion, electron transport, and redox activity. The results provide a framework for developing scalable, high-performance, and sustainable electrode materials for next-generation lithium-ion batteries and supercapacitors. Full article

Excessive levels of heavy metal pollutants in the environment pose significant threats to human health and ecosystem stability. Consequently, the accurate and rapid detection of heavy metal ions is critically important. A AgNPs@CeO₂/Nafion composite was prepared by dispersing nano-ceria (CeO₂) in a Nafion solution and incorporating silver nanoparticles (AgNPs). The morphology, microstructure, and electrochemical properties of the modified electrode materials were systematically characterized using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), and cyclic voltammetry (CV). By leveraging the oxygen vacancies and high electron transfer efficiency of CeO₂, the strong adsorption capacity of Nafion, and the superior conductivity of AgNPs, an AgNPs@CeO₂/Nafion/GCE electrochemical sensor was developed. Under optimized conditions, trace Pb²⁺ in water was detected using square wave anodic stripping voltammetry (SWASV). The sensor demonstrated a linear response for Pb²⁺ within the concentration range of 1–100 μg·L⁻¹, with a detection limit of 0.17 μg·L⁻¹ (S/N = 3). When applied to real water samples, the method achieved recovery rates between 93.7% and 110.3%, validating its reliability and practical applicability. Full article

Solid oxide cells (SOCs) are highly efficient and versatile devices capable of utilizing a variety of fuels, presenting promising solutions for energy conversion and renewable resource utilization. There is an urgent need for the strategic design of robust and high-efficiency materials to enhance both conversion and energy efficiencies before SOCs can be applied for large-scale industrial production. Nanocomposite electrodes, especially those fabricated through infiltration and metal nanoparticle exsolution, have emerged as highly active electrocatalytic materials that significantly improve the performance and durability of SOCs. This review systematically summarizes and analyzes recent advances in the nanoscale architecture of electrode materials fabricated via common nanoengineering strategies, including infiltration and in situ exsolution, with applications in CO₂/H₂O reduction, hydrocarbon electrochemical oxidation, solid oxide fuel cells, and reversible operation. Finally, this review highlights existing bottlenecks and promising breakthroughs in common nanotechnologies, aiming to provide useful references for the rational design of nanomaterials for SOCs. Full article

Metal–organic frameworks (MOFs) or coordination polymers have gained enormous interest in recent years due to their extraordinary properties, including their high surface area, tunable pore size, and ability to form nanocomposites with various functional materials. MOF materials possess redox-active properties that are beneficial for electrochemical sensing applications. Furthermore, the tunable pore size and high surface area improve the adsorption or immobilization of enzymes, which can enhance the sensitivity and selectivity for specific analytes. Additionally, MOF-derived metal sulfides, phosphides, and nitrides demonstrate superior electrical conductivity and structural stability, ideal for electrochemical sensing. Moreover, the functionalization of MOFs further increases sensitivity by enhancing electrode–analyte interactions. The inclusion of carbon materials within MOFs enhances their electrical conductivity and reduces background current through optimized loading, preventing agglomeration and ensuring uniform distribution. Noble metals immobilized on MOFs offer improved stability and catalytic performance, providing larger surface areas and uniform nanoparticle dispersion. This review focuses on recent developments in MOF-based biosensors specifically for glucose, dopamine, H₂O₂, ascorbic acid, and uric acid sensing. Full article

Exciton generation and separation play an important role in the photoelectric properties and the luminescence performance of materials. In order to tailor the defects and grain boundaries and improve the exciton separation and light harvesting of the graphitic carbon nitride (g-C₃N₄) nanosheets, a C₃N₄/bismuth sulfide (Bi₂S₃) nanocomposite was synthesized. The photoelectric properties of the 405, 532, 650, 780, 808, 980 and 1064 nm light sources were studied using Au electrodes and graphite electrodes with 4B and 5B pencil drawings. The results indicate that the C₃N₄/Bi₂S₃ nanocomposite exhibited photocurrent switching behavior in the broadband light spectrum range. It is noted that even with zero bias applied, a good photoelectric signal was still measured. The resulting nanocomposite exhibited good photophysical stability. Physical mechanisms are discussed herein. It is suggested that the interfacial interaction of C₃N₄ and Bi₂S₃ in the nanocomposite creates a strong built-in electric field, which accelerates the separation of excitons. Therefore, as a dynamic process of photoexcitation, fluorescence, the photoelectric effect, and scattering are three main competing processes; the separation of excitons and the extraction of free photogenerated charge can be used as a reference for the fluorescent materials or other photoelectric materials studies as photophysical properties. This study also serves as an important reference for the design, defect and grain boundary modulation or interdisciplinary application of functional nanocomposites, especially for the bandgap modulation and suppression of photogenerated carrier recombination. Full article

This study presents an easy and rapid two-step electrodeposition method for the synthesis of a novel hierarchical dendritic AuPt bimetallic nanocomposite electrode. Ascorbic acid served as both a reducing and directing agent, while a roughened carbon substrate facilitated the formation of the unique dendritic nanostructure. The structural and compositional properties of the synthesized material were comprehensively characterized using X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), selected area electron diffraction (SAED), and transmission electron microscopy (TEM). The resulting nanocomposite exhibited a significantly enhanced specific surface area of 6.97 m² g⁻¹, compared to commercial Pt/C. Electrochemical investigations demonstrated superior electrocatalytic activity and durability for methanol oxidation in the prepared AuPt nanocomposite electrode, suggesting its promising potential for fuel cell applications. Full article

To address the environmental hazards posed by oil spills and the limitations of conventional hydrocarbon monitoring techniques, a cost-effective and user-friendly gas sensor system was developed for the real-time detection and quantification of hydrocarbon contaminants in soil. This system utilizes carbon black (CB)-filled poly(methyl methacrylate) (PMMA) and poly(vinyl chloride) (PVC) nanocomposites to create chemoresistive sensors. The CB-PMMA and CB-PVC composites were synthesized and deposited as thin films onto interdigitated electrodes, with their morphologies characterized using scanning electron microscopy. The composites, optimized at a composition of 10% w/w CB and 90% w/w polymer, exhibited a sensitive response to hydrocarbon vapors across a tested range from C₂₀ (99 ppmV) to C₈ (8750 ppmV). The sensor’s response mechanism is primarily attributed to the swelling-induced resistance change of the amorphous polymer matrix in hydrocarbon vapors. These findings demonstrate the potential use of CB–polymer composites as field-deployable gas sensors, providing a rapid and efficient alternative to traditional gas chromatography methods for monitoring soil remediation efforts and mitigating the environmental impact of oil contamination. Full article

We developed a sensor consisting of V₂O₅ nanorods and a reduced graphene oxide (rGO) nanocomposite (V₂O₅/rGO) with immobilized DNA aptamers (Apt-NH@V₂O₅/rGO) for the sensitive electrochemical detection of Hg (II). The V₂O₅ nanorods anchored on rGO nanosheets were synthesized using a hydrothermal method. The nanocomposite was analyzed by various powerful physical methods that include X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), field emission scanning electron microscopy (FE-SEM), Raman spectroscopy, the Brunauer–Emmett–Teller (BET) method, and Fourier transform infrared spectroscopy (FTIR). The FE-SEM of V₂O₅ disclosed the nanorod-like structure and uniform anchoring of V₂O₅ on the rGO nanosheet. Moreover, the BET results showed that the V₂O₅/rGO nanocomposite possesses excellent porosity. Furthermore, a glassy carbon electrode (GCE) was modified with Apt-NH@V₂O₅/rGO and used for the electrochemical detection of Hg(II) by differential pulse voltammetry (DPV). The aptasensor exhibited excellent sensitivity and selectivity toward Hg(II) detection, with a limit of detection (LOD) of 5.57 nM, which is below the maximum permissible limit established by WHO for rivers (30 nM). The sensor also exhibited significant stability and good repeatability. Full article

Wearable biosensors have been of interest for their wide range of uses, varying from recording biological signals to measuring strain of bending joints. Carbon nanoparticles have been utilized in biocompatible polymers to create nanocomposites with highly tunable mechanical and electrical properties. These nanocomposites have been demonstrated to be highly effective as wearable sensors for recording physiological signals such as electroencephalography (EEG), offering advantages in mechanical and electrical properties and signal quality over commercially available sensors while maintaining feasibility and scalability in manufacturing. This review aims to provide a critical summary of the recent literature on the properties, design, fabrication, and performance of carbon-based nanocomposites for EEG electrodes. The goal of this review is to highlight the various design configurations and properties thereof, manufacturing methods, performance measurements, and related challenges associated with these promising noninvasive dry soft electrodes. While this technology offers many advantages over either other noninvasive or their invasive counterparts, there are still various challenges and opportunities for improvements and innovation. For example, the investigation of gradient composite structures, hybrid nanocomposite/composite materials, hierarchical contact surfaces, and the influence of loading and alignment of the dispersal phase in the performance of these electrodes could lead to novel and better designs. Finally, current practices for evaluating the performance of novel EEG electrodes are discussed and challenged, emphasizing the critical need for the development of standardized assessment protocols, which could provide reliability in the field, enable benchmarking, and hence promote innovation. Full article

Fabricating electrodes with high electrocatalytic efficiency is crucial for the commercial feasibility of vanadium redox flow batteries (VRFBs). In this study, metal–organic framework-derived ZnO and Fe₂O₃ with a high specific surface area were successfully synthesized via high-energy ball milling. The nanocomposite material (ZnO-Fe₂O₃) was prepared through ultrasonication and coated on the graphite felt using dip coating, serving as the positive electrode for the VRFB. These modified electrodes control polarization losses, leading to high voltage efficiency (VE) and energy efficiency (EE), even at high current densities. Consequently, the nanocomposite-modified electrode shows VE of 87% and EE of 84% at 50 mA/cm², surpassing the performance of individual materials. The nanocomposite material retains its EE without degradation over 250 cycles at a current density of 150 mA/cm². This enhanced performance is due to improved kinetics and reduced losses in the VO²⁺/VO₂⁺ redox couple, enabled by the nanocomposite material. Full article

A highly redox-active ternary nickel sulfide and cobalt-anchored carbon nanocomposite (NiS-Co@C) electrochemical electrode is synthesized by a two-step pyrolysis-hydrothermal method using biomass-derived carbon. The high-crystalline hierarchical porous nanostructure provides abundant voids and cavities, along with a large specific surface area, to improve the interfacial properties. The as-synthesized electrode achieved a specific capacity of 640 C g⁻¹ at 1 A g⁻¹, with a capacity retention of 93% over 5000 cycles, revealing outstanding electrochemical properties. Nickel sulfide nanoparticles embedded in the cobalt-anchored carbon framework improved redox activity, ion transport, and conductivity, resulting in a dominant diffusion-controlled battery-type behavior. Moreover, a hybrid supercapattery, based on battery-type NiS-Co@C as the positrode and capacitive-type activated carbon as the negatrode, achieved a maximum specific energy/power of 33 Wh kg⁻¹/7.1 kW kg⁻¹ with a 91% capacity retention after 5000 cycles. The synergistic effect of the combinatorial battery–capacitor behavior of the hybrid supercapattery has improved the specific energy–power considerably, leading the development of next-generation energy storage technologies. Full article

Diabetes mellitus is a pathological condition that requires continuous measurement of glucose concentration in human blood. In this study, two enzymatic mediator-free glucose biosensors based on premodified graphite rod (GR) electrodes were developed and compared. GR electrode modified with electrochemically synthesized dendritic gold nanostructures (DGNS), a cystamine (Cys) self-assembled monolayer (SAM), and glucose oxidase (GOx) (GR/DGNS/Cys/GOx) and GR electrode modified with DGNS, Cys SAM, enzymatically obtained polyaniline (PANI) nanocomposites with embedded 6 nm gold nanoparticles (AuNPs) and GOx (GR/DGNS/Cys/PANI-AuNPs-GOx/GOx) were investigated electrochemically. Biosensors based on GR/DGNS/Cys/GOx and GR/DGNS/Cys/PANI-AuNPs-GOx/GOx electrodes were characterized by a linear range (LR) of up to 1.0 mM of glucose, storage stability of over 71 days, sensitivity of 93.7 and 72.0 μA/(mM cm²), limit of detection (LOD) of 0.027 and 0.034 mM, reproducibility of 13.6 and 9.03%, and repeatability of 8.96 and 8.01%, respectively. The GR/DGNS/Cys/PANI-AuNPs-GOx/GOx electrode was proposed as more favorable for glucose concentration determination in serum due to its better stability and resistance to interfering electrochemically active species. The technological solutions presented in this paper are expected to enable the development of innovative mediator-free enzymatic glucose biosensors, offering advantages for clinical assays, particularly for controlling blood glucose concentration in individuals with diabetes. Full article

Here, crystalline SiO₂ quantum dots (QDs) of 3–5 nm size were grown within the layers of reduced graphene oxide (rGO) by a solution mode chemical growth process at a relatively low temperature (100 °C). The composite was applied as a negative electrode in a Li-ion half-cell battery and the electrochemical investigation confirmed a distinct first-cycle discharge/charge capacity (~865 mAhg⁻¹/387 @ 51 mAg⁻¹). The battery could retain a capacity of 296 mAhg⁻¹ after 60 charge/discharge cycles with 99% coulombic efficiency. Furthermore, at a high current rate of 1.02 Ag⁻¹, the battery was able to display an apparent rate capability (214.47 mAhg⁻¹), indicating the high chemical and mechanical stability of the composite at a high current rate. A structural analysis revealed clear distinct diffraction peaks of SiO₂ and high-resolution transmission electron microscopy images showed discrete atomic planes, thereby confirming the growth of crystalline SiO₂ QDs within the layers of rGO. Full article