Search Results (339)

Aryl diazonium salt chemistry offers a robust and versatile approach for the modification of material surfaces via the covalent immobilization of reactive functional groups under mild conditions. In this study, this strategy was successfully applied to graft the chelating agent 4-(2-pyridylazo)resorcinol (PAR) onto Amberlite XAD-4 resin. Initially, 4-nitrobenzenediazonium tetrafluoroborate (NBDT) was covalently anchored onto the resin surface using hypophosphorous acid as a reducing catalyst to introduce aryl nitro groups. These nitro groups were subsequently reduced to aniline functionalities, enabling diazo coupling with PAR. The successful modification of the resin was confirmed by ATR-FTIR spectroscopy, thermogravimetric analysis (TGA), and X-ray photoelectron spectroscopy (XPS). The synthesized chelating resin exhibited sorption capacities of 0.152, 0.167, and 0.172 mM g⁻¹ for Co(II), Ni(II), and Cu(II), respectively. The functionalized resin was packed into standard SPE cartridges and employed as a selective sorbent for the extraction and preconcentration of trace metals from groundwater samples collected from Dhalamah Valley, Al-Madinah Al-Munawwarah, prior to quantification by inductively coupled plasma mass spectrometry (ICP-MS). These results demonstrate the effectiveness of rapid diazonium-based surface functionalization for the preparation of selective polymeric metal chelators suitable for the extraction of trace metals from complex groundwater matrices. Full article

The synthesis of cannabigerol—a cannabinoid with significant pharmaceutical potential—is described. The synthesis involves four stages. In the first step, (E)-non-3-en-2-one reacts with dimethyl malonate to yield a cyclic enone, which is subsequently oxidized with bromine to produce the olivetol ester. This ester then undergoes an alumina-catalyzed coupling reaction with geraniol, followed by ester hydrolysis to obtain cannabigerol. By modifying the chain length of the enone in the initial step and employing allylic alcohols other than geraniol, a range of cannabigerol derivatives can be synthesized, including the natural product cannabigerovarin. Full article

Two new very-long-chain 5-n-alkylresorcinol (AR) homologues, that is, 5-n-nonacosylbenzene-1,3-diol and 5-n-hentriacontylbenzene-1,3-diol, were isolated from acetone extracts of Ailanthus altissima samaras. These phenolic compounds were detected in nearly equal proportions, although their total content varied considerably between samples from urban-grown trees. No correlation was observed between AR levels and the physiological state of the tree, suggesting that environmental conditions may strongly influence AR biosynthesis in A. altissima. Furthermore, the isolated AR mixture exhibited antifungal activity against soil-borne phytopathogens of the genera Fusarium and Rhizoctonia. Full article

This study reports an improved diastereoselective synthesis of substituted spiro[chromane-2,4′-pyrimidin]-2′(3′H)-ones via the acid-catalyzed condensation of 6-styryl-4-aryldihydropyrimidin-2-ones with resorcinol, 2-methylresorcinol, and pyrogallol. The optimized method allows for the isolation of diastereomerically pure products, with stereoselectivity controlled by varying acid catalysts (e.g., methanesulfonic acid vs. toluenesulfonic acid) and solvent conditions. The synthesized compounds were evaluated for antimicrobial and antioxidant activities. Notably, the (2S*,4R*,6′R*)-diastereomers exhibited significant antibacterial activity against both Gram-positive and Gram-negative bacterial strains with minimal inhibition concentration down to 2 µg/mL, while derivatives containing vicinal bisphenol moieties demonstrated potent antioxidant activity, with IC₅₀ values (12.5 µg/mL) comparable to ascorbic acid. Pharmacokinetic analysis of selected hit compounds revealed favorable drug-like properties, including high gastrointestinal absorption and blood-brain barrier permeability. These findings highlight the potential of spirochromane-pyrimidine hybrids as promising candidates for further development in the treatment of infectious diseases and oxidative stress-related pathologies. Full article

The relationship between silvicultural strategies, manifested in the thinning method and rotation age on sites with different water supply, and the mechanical properties of engineered wood products plywood and laminated veneer lumber has been analyzed. Sample logs from five German sites of Norway spruce (Picea abies (L.) Karst.) and Douglas fir (Pseudotsuga menziesii (M.) Franco) have been rotary-peeled and processed into boards with a phenol–resorcinol–formaldehyde adhesive to evaluate their performance under flexural, tensile, and compressive loads. Satisfactory coefficients of determination were reached for Norway spruce in regard to the silvicultural framework and the tree characteristics of slenderness and crown base height. Douglas fir products did not achieve comparable determination due to high variance within boards and stands but did achieve significantly better mechanical properties. Norway spruce was observed to be more responsive to thinning measures, while the effect of different thinning regimes was not evident for Douglas fir. The on-site evaluation of Douglas fir stands for veneer product quality based on silvicultural parameters and tree characteristics was shown to be inconclusive, with its naturally higher wood density being the decisive constant. Full article

Controlled porosity with precise pore sizes in carbon monoliths (CMs) is crucial for optimizing performance in electrochemical energy storage and adsorption applications. This study explores the influence of porosity in CMs, developed from polymer precursors via the sol–gel route, employing soft templating, in situ graphene growth, and post-activation. The effects on CO₂ and H₂ sorption and electrochemical capacitor (EC) performance are analyzed. Graphene is successfully grown in situ from graphene oxide (GO), as confirmed by several characterization analyses. The amount of GO incorporated influences the crosslink density of the polymer gel, generating various pore structures at both micro- and mesoscales, which impacts performance. For instance, CO₂ capture peaks at 5.01 mmol g⁻¹ (0 °C, 101 kPa) with 10 wt % GO, due to the presence of wider micropores that allow access to ultramicropores. For H₂ storage, the best performance is achieved with 5 wt % GO, reaching 12.8 mmol g⁻¹ (−196 °C, 101 kPa); this is attributed to the enlarged micropore volumes between 0.75 and 2 nm that are accessible by mesopores of 2 to 3 nm. In contrast, for the ECs, lower GO loadings (0.5 to 2 wt %) improve ion accessibility via mesopores (4 to 6 nm), enhancing rate capability through better conduction. Full article

This study investigates the use of carbonized hemp fiber (CHF) as a reinforcement for phenol resorcinol formaldehyde (PRF)-based fiber composites. The hemp fiber was carbonized slowly up to 1000 °C under N₂ with a yield of 18%. Compression-molded composites were prepared with CHF and then compared to hemp (HF) and wood fiber (WF) at 0 to 50% loading with PRF resin. The flow characteristics of the uncured composites were determined by dynamic rheology and showed pseudoplastic behavior; the composites show promise as extrudable materials. The flexural strength of the HF composites (69 MPa for 40% HF) was higher than the CHF composites. The thermal stability of the composites was determined by thermogravimetric analysis (TGA), and the CHF composites were more stable than the HF and WF composites. Carbonization was shown to enhance both the thermal stability and the hydrophobicity of the composites, which is expected to lead to less susceptibility to weathering and biological attack. Formulations of 50% WF, 50% CHF, and 30% HF fiber loadings with PRF were able to be extruded into rods. Extruded CHF composites showed better mechanical properties than the HF and WF composites. Full article

Vitamins are crucial micro-nutrients for overall well-being, making continuous monitoring essential. There are demands to provide an alternative detection, especially using a portable detection or a point-of-care-testing (POCT) device. One promising approach is employing an in situ electro-polymerised MIP (eMIP), which offers a straightforward polymerisation technique on screen-printed electrodes (SPEs). Here, we report a review based on three databases (PubMed, Scopus, and Web of Science) from 2014 to 2024 using medical subject heading (MeSH) terms “electrochemical polymerisation” OR “electropolymerisation” crossed with the terms “molecularly imprinted polymer” AND “vitamin A” OR “vitamin D” OR “vitamin E” OR “vitamin K” OR “fat soluble vitamin” OR “vitamin B” OR “vitamin C” OR “water soluble vitamin”. The resulting 12 articles covered the detection of vitamins in ascorbic acid, riboflavin, cholecalciferol, calcifediol, and menadione using monomers of catechol (CAT), 3,4-ethylenedioxythiophene (EDOT), o-aminophenol (oAP), o-phenylenediamine (oPD), pyrrole, p-aminophenol (pAP), p-phenylenediamine (pPD), or resorcinol (RES), using common bare electrodes including graphite rod electrode (GRE), glassy carbon electrode (GCE), gold electrode (GE), and screen-printed carbon electrode (SPCE). The most common electrochemical detections were differential pulse voltammetry (DPV) and linear sweep voltammetry (LSV). The imprinting factor (IF) of the eMIP-modified electrodes were from 1.6 to 21.0, whereas the cross-reactivity was from 0.0% to 29.9%. Several types of food and biological samples were tested, such as supplement tablets, poultry and pharmaceutical drugs, soft drinks, beverages, milk, infant formula, human and calf serum, and human plasma. However, more discoveries and development of detection methods needs to be performed, especially for the vitamins that have not been studied yet. This will allow the improvement in the application of eMIPs on portable-based detection and POCT devices. Full article

This study explores the synthesis of photocurable non-isocyanate polyhydroxyethylurethanes (BPHUs) derived from renewable sources, designed for biomedical applications and the development towards advanced light curing processes. The following two pathways were developed: an aliphatic route using 1,4-butanediol-derived cyclic carbonates and an aromatic route with resorcinol-based carbonates. Ring-opening polymerization with dodecanediamine produced BPHU intermediates, which were methacrylated to form photoreactive derivatives (aliphatic MAs and aromatic MAs). Comprehensive characterization, including NMR, GPC, and FTIR, confirmed the successful synthesis. The UV curing of these methacrylated compounds yielded hydrogels with swelling properties. Aliphatic BPHUs achieved a gel content of 91.3% and a swelling of 1057%, demonstrating the flexibility and UV stability suitable for adaptable biomedical applications. Conversely, aromatic BPHUs displayed a gel content of 78.1% and a swelling of 3304%, indicating higher rigidity, which is advantageous for load-bearing uses. Cytotoxicity assessments adhering to the DIN EN ISO 10993-5 standard demonstrated non-cytotoxicity, with an >80% cell viability for both variants. This research underscores the potential of green chemistry in crafting biocompatible, versatile BPHUs, paving the way for eco-friendly materials in implantable medical devices. Full article

Cyclohexylamines are important and valuable key intermediates in the chemical industry, playing a crucial role in the synthesis of a variety of compounds. Developing a low-cost and efficient synthesis route for these chemicals is highly desirable but also presents significant challenges due to the complexity of the reactions involved. Herein, we designed three pathways for the production of 1,3-cyclohexanediamine (1,3-CHDA), including the one-pot reductive amination of resorcinol (RES) with ammonia and molecular hydrogen, the reductive amination of 1,3-cyclohexandione (1,3-CHD) with ammonia, and the oximation–hydrogenation of 1,3-CHD. Through systematical investigation, we finally developed a low-cost, simple operation and an efficient methodology for the synthesis of 1,3-CHDA as follows: RES was firstly hydrogenated in H₂O over Raney Ni to obtain 1,3-CHD, and then the obtained liquid reaction mixture was used directly for the subsequent oximation with hydroxylamine hydrochloride without further purification to form the oxime intermediate, followed by the hydrogenation of the oxime in methanol over Raney Ni to achieve the target product 1,3-CHDA with a high yield. Full article

This study developed iron-oxide-functionalized carbon xerogels for enhanced arsenic adsorption to mitigate global water contamination. The composites were synthesized by integrating magnetite nanoparticles (15–20 nm) into a resorcinol–formaldehyde matrix via sol–gel polycondensation, followed by controlled pyrolysis. Key parameters—magnetite/resorcinol ratios (0.03–0.07), carbonization conditions (temperature, heating rate, duration), and H₂O₂-induced surface modification—were optimized to maximize adsorption performance. Characterization (SEM/EDX, XRD, FTIR, BET, TEM) confirmed uniform magnetite dispersion (~5 wt%) and revealed that pyrolysis at 850 °C enhanced porosity (378.8 m²/g surface area) and refined surface chemistry. Adsorption kinetics followed Elovich (R² = 0.9396) and Power Function (R² = 0.9443) models, indicating chemisorption dominance. Response Surface Methodology optimized desorption parameters using a Central Composite Design with three factors and two center points with repetition. A kinetic study of As(V) desorption from carbon xerogels was conducted, yielding optimal conditions: 1.0 M KOH, 160 rpm agitation, and 90 min contact time. The adsorbent retained >88% regeneration efficiency over four cycles, demonstrating robust reusability. Synergistic effects of magnetite incorporation, tailored pyrolysis, and H₂O₂ modification significantly improved arsenic selectivity and capacity in complex matrices, while enabling magnetic recovery. Full article

Resorcinarenes are polyhydroxylated platforms consisting of 4, 5, 8, or more units of resorcinol. The numbers refer to the number of resorcinol units, with 4-unit platforms being the most stable. Investigation into their use in pharmaceutical applications has increased due to high versatility and functionalization. They exhibit significant flexibility due to their methylene bridges and to the interactions of hydrogen bridges and van der Waals forces. These platforms can be used in an increasing number of applications, which include the functionalization of nanoparticles and relevant materials, the synthesis of catalysts, the removal of contaminants, and analytical separations in analytes such as benzodiazepines and norepinephrine. For this last application, resorcinarenes are functionalized with specific important functional groups. Polymers were developed in the 20th century for the development of materials with significant improvements in thermal and mechanical properties. They are cross-linked polymeric structures, mainly made up of monomers such as styrene, divinylbenzene acrylate, vinylpyridine, and vinyl acetate, among others. They often have a homogeneous, porous structure, but this structure can vary significantly depending on the type of solvent used. Therefore, they have been applied in the functionalization of the polyhydroxylated platforms. In this review, the structure, properties, and synthesis of resorcinarenes, as well as the use of polymeric matrices, are analyzed, emphasizing the functionalization of organic polymers using resorcinarenes. Furthermore, the respective applications in controlled drug delivery, pharmaceutical transport, and therapeutics, which are diverse and show promising growth, will be explored. Full article

Cistanche deserticola, a holoparasitic plant widely used in traditional Chinese medicine, relies on chemical signals from its host plant, Haloxylon ammodendron, to initiate seed germination and haustorium induction. This study employed UPLC-MS/MS to analyze the root metabolites of H. ammodendron. The results showed that 11 substances such as phenolic acids, flavonoids, and alkaloids were mainly contained in the roots of H. ammodendron, among which phenolic acids accounted for the largest proportion, accounting for 18.00% in winter samples and 16.11% in autumn samples. Based on the reported exogenous substances that promote haustorium induction in C. deserticola and the differential metabolites in H. ammodendron roots, we selected seven exogenous signaling substances: 2,6-dimethoxy-1,4-benzoquinone, resorcinol, ferulic acid, syringic acid, vanillic acid, vanillin, and pelargonidin. Through concentration-gradient experiments (0.1–100 μM), we assessed their effects on haustorium induction in C. deserticola seeds. The results showed that among the seven substances, syringic acid, vanillic acid, and vanillin had the best impact on promoting the haustorium induction of C. deserticola seeds. Vanillic acid had the best impact at the concentration of 10 μmol/L, and the highest haustorium induction rate was 50.2%. There was no significant difference in the concentrations of vanillin and syringic acid. The results showed that phenolic acids in the host root system stimulated haustoria induction in C. deserticola seeds, with different substances requiring different optimal concentrations. This study not only identifies specific phenolic acids that enhance C. deserticola productivity but also establishes a chemical ecology framework for investigating host–parasite interactions in other root parasitic species. Full article

The propolis produced by stingless bees is a complex mixture of natural sticky components mixed with soil or clay. Global research on propolis has focused on studying the biological and pharmacological properties and chemical composition of stingless bee propolis from Brazil, Indonesia, and other regions. However, studies of stingless bee propolis produced in Mexico are scarce. This study aimed to determine the chemical composition of the geopropolis of Scaptotrigona mexicana collected in the Totonacapan region and to evaluate its antioxidant and antibacterial activities. The phenolic contents of the ethanolic extract of the collected propolis ranged from 2.45 ± 0.03 mg GAE/g to 3.48 ± 0.56 mg GAE/g of dry extract. The total flavonoid content ranged from 0.69 ± 0.03 mg QE/g to 0.84 ± 0.009 mg QE/g of dry extract. The antioxidant activity of the ethanolic extracts was assessed via DPPH, ABTS, and FRAP assays. The minimum inhibitory concentration values exhibited by the ethanolic extract (>512 g/mL) for Gram-negative bacteria (Pseudomonas aerugunosa and Phorphyromonas gingivalis) were higher than those of Gram-positive bacteria. The stingless bee propolis extract showed the highest antibacterial activity against Streptococcus mutans (256 g/mL). Five known compounds, taraxeryl acetate (1), lupeol (3), cicloart-23-en-3β,25-diol (5), mangiferoic acid (6), and 5-(11’Z-heptadecenyl)-resorcinol (7), and two irresoluble mixtures of 3-O-acetyl-α-(2a) and 3-O-acetyl-β-amyrins (2b), and α- (4a) and -amyrins (4b), were identified by nuclear magnetic resonance spectroscopy and mass spectrometry. Additionally, 39 volatile compounds were identified via headspace-solid phase microextraction using the hyphenated gas chromatography coupled to mass spectrometry time-of-flight. The main volatile compounds detected include trans-α-bergamotene (8.15%), hexanal (7.17%), 2-heptanone (7.60%), and α-copaene (7.09%). Full article

Phytocannabinoids (pCBs) from Cannabis sativa represent an important class of bioactive molecules, potentially useful for the treatment of a wide range of diseases. Their efficacy is due to their ability to interact with multiple targets of the endocannabinoid system, including the thermosensitive transient receptor potential (Thermo-TRPs), namely TRPV1-4, TRPA1, and TRPM8 channels. Previously, we demonstrated a shift in selectivity toward TRPA1 in the activity profile of the main pCBs, that is, CBD, ∆⁸-THC, CBG, CBC, and CBN, by swapping the pentyl chain with the α,α-dimethylheptyl (DMH) one. Using these derivatives as a starting point, here we investigate the effects on the thermo-TRPs activity profile of the integration of a quinone group into the resorcinol scaffold. We found that, while the activity on TRPA1 is substantially retained, an increase in potency/efficacy on the TRPV3 modulation is observed. Docking studies were used to elucidate the binding modes of the most active compounds toward this receptor, providing a rationale for this biological activity. In summary, we show that the quinone derivatives of DMH-pCBs are endowed with a TRPA1/TRPV3 desensitizing activity, potentially useful for the treatment of skin diseases sustained by inflammatory conditions. Full article