Micromachines

Advancement of Laser Technology from Materials Processing to Nano/Micro Fabrications

edited by

and Sima Umrao

submission deadline 20 Sep 2024 | 1 articles | Viewed by 922 | Submission Open

Keywords: laser material processing; light– matter interactions; lasers in defense and manufacturing; sustainable recycling process; renewable energy; laser machining; cutting; welding; and polishing

(This special issue belongs to the Section D：Materials and Processing)

Surface and Bulk Acoustic Wave Resonators: Materials, Design and Fabrication

edited by

Jingfu Bao

and Kenya Hashimoto

submission deadline 25 Sep 2024 | 2 articles | Viewed by 2747 | Submission Open

Keywords: surface acoustic wave; bulk acoustic wave; excited bulk acoustic wave resonator (XBAR); 3D finite element method (FEM); resonator; temperature coefficient of frequency (TCF); interdigital transducers (IDTs); coupling of mode (COM) model; modified Butterworth van Dyke (mBVD); quality factors (Q); acoustic impedance (Z); multiplexer; nonlinearity; phononic crystal

(This special issue belongs to the Section E：Engineering and Technology)

Miniaturized Chemical Sensors

edited by

Ming Xu

and

Caixia Yin

submission deadline 30 Sep 2024 | 10 articles | Viewed by 18440 | Submission Open

Keywords: miniaturized chemical sensors; signal; cell imaging; diagnosis; environmental evaluation; quality testing

(This special issue belongs to the Section C：Chemistry)

Recent Advances in Micro/Nano-Fabrication

edited by

Yao Liu

and

Jinjie Zhou

submission deadline 30 Sep 2024 | 11 articles | Viewed by 18191 | Submission Open

Keywords: micromachining; micro-3D printing; laser machining; textured surface; microdevice

(This special issue belongs to the Section E：Engineering and Technology)

Neural Interface: From Material to System

edited by Liuyang Sun

submission deadline 30 Sep 2024 | 5 articles | Viewed by 9451 | Submission Open

Keywords: neural signal encoding and decoding; neural electrodes: flexible electrodes; stretchable electrodes; bio-sensors and bio-actuators; neural signal processing unit; BMI-based robots; implantable bioelectronics; neuroprosthetics; neurological disorder diagnosis and treatment

(This special issue belongs to the Section B：Biology and Biomedicine)

Advanced Thin-Films: Design, Fabrication and Applications, 2nd Edition

edited by

Elena Kalinina

submission deadline 30 Sep 2024 | 7 articles | Viewed by 8881 | Submission Open

Keywords: thin-film technology; nano/microelectromechanical systems; transducers; actuators; electrochemical devices; micro/nanostructures; nanoscale materials

(This special issue belongs to the Section D：Materials and Processing)

Emerging Packaging and Interconnection Technology

edited by

Zhuo Chen

and

Ziyu Liu

submission deadline 30 Sep 2024 | 5 articles | Viewed by 6847 | Submission Open

Keywords: advanced packaging; micro/nano-structure; MEMS packaging; high-density interconnection; modeling and simulation; heterogeneous integration; surface and interface engineering; manufacturing tooling; additive/subtractive packaging manufacturing

(This special issue belongs to the Section E：Engineering and Technology)

Exploration and Application of Micro-Devices/Sensors in Analytical Chemistry

edited by

Cristina Román-Hidalgo

,

María Jesús Martín-Valero

and

Mercedes Villar-Navarro

submission deadline 30 Sep 2024 | 4 articles | Viewed by 6414 | Submission Open

Keywords: sensors; biosensors; sensing; on-site analysis; drug monitoring; drug detection; separation; nanomaterials; smart materials; microfluidic devices; portable devices

(This special issue belongs to the Section B：Biology and Biomedicine)

Integrated Photonics and Optoelectronics, 2nd Edition

edited by

He Yang

submission deadline 30 Sep 2024 | 1 articles | Viewed by 5890 | Submission Open

Keywords: active and passive photonic devices; nanoscale optical modulators and photodetectors; chip integrated single photon generation and detection; photonic interfaced hybrid quantum systems; photonic computing and photonic quantum computing; advanced nanomaterial for photonic structure; on chip mid-IR photonics; micro- and nanofabrication techniques

(This special issue belongs to the Section A：Physics)

Microfluidic Chips and Microdevices for Biomedical Engineering

edited by

Huaying Chen

submission deadline 30 Sep 2024 | 3 articles | Viewed by 5000 | Submission Open

Keywords: micro- and nanofluidics; lab-on-a-chip; drug delivery systems; microdevices for biomedical engineering; biosensing; nanoparticles

(This special issue belongs to the Section B：Biology and Biomedicine)

Future Prospects of Additive Manufacturing

edited by Haiyang Fan,

Shuo Yin

, Jincheng Wang,

Sasan Dadbakhsh

and

Changjun Han

submission deadline 30 Sep 2024 | 4 articles | Viewed by 4808 | Submission Open

Keywords: dedicated materials for additive manufacturing; post-processing technologies; topological design for additive manufacturing; multi-scale and multi-physics simulations; online real-time quality monitoring in additive manufacturing; 3D bioprinting; hybrid additive manufacturing; multi-material additive manufacturing; field-assisted additive manufacturing; novel applications of additive manufacturing

(This special issue belongs to the Section D3: 3D Printing and Additive Manufacturing)

MEMS Inertial Device, 2nd Edition

edited by

Huiliang Cao

submission deadline 30 Sep 2024 | 4 articles | Viewed by 4540 | Submission Open

Keywords: MEMS inertial device; MEMS inertial device controlling method; inertial device signal processing; MEMS inertial device modeling and simulation; MEMS gyroscope; MEMS accelerometer

(This special issue belongs to the Section A：Physics)

Emerging Memory Materials and Devices

edited by

Qilin Hua

and Tao Zeng

submission deadline 30 Sep 2024 | 3 articles | Viewed by 4228 | Submission Open

Keywords: emerging memory materials and devices: RRAM; FeRAM; MRAM; artificial synapse/neuron; artificial sensor system; artificial neural networks; in-memory computing; neuromorphic computing

(This special issue belongs to the Section A：Physics)

Electromagnetics with Graphene and 2D Materials: Physics, Applications and Meta-Devices

edited by Alexandros Pitilakis,

Odysseas Tsilipakos

and Hamidreza Taghvaee

submission deadline 30 Sep 2024 | 1 articles | Viewed by 3682 | Submission Open

Keywords: graphene; two-dimensional materials (TMDs; MXenes; black phosphorous; etc.); metasurfaces; optics and photonics; THz science; mmWave technology; optoelectronics; electro-optics; reconfigurable devices; electronics; energy harvesting; space/time-varying structures; nonlinear phenomena; light sources; topological photonics; quantum photonics; waveguides; antennas

(This special issue belongs to the Section D：Materials and Processing)

Fiber Lasers and Applications

edited by

Haitao Zhang

submission deadline 30 Sep 2024 | 3 articles | Viewed by 3635 | Submission Open

Keywords: high-power and high-energy fiber lasers; fiber laser processing; applications of fiber lasers; ultra-fast fiber laser micromachining

(This special issue belongs to the Section E：Engineering and Technology)

Laser and Photoelectronics in Optical Communication

edited by Fan Zhang

submission deadline 30 Sep 2024 | 1 articles | Viewed by 3417 | Submission Open

Keywords: photonics materials; ultrafast photonics; light– matter interaction; fiber lasers and fiber optics; laser metrology and spectroscopy; optical imaging; optics in telecommunication; optical computing and optical information processing; photoelectric devices

(This special issue belongs to the Section A：Physics)

GaN-Based Materials and Devices: Research and Applications

edited by Wei Liu and Kun Wang

submission deadline 30 Sep 2024 | 3 articles | Viewed by 3373 | Submission Open

Keywords: group III-nitrides semiconductors; epitaxial growth and fabrication; Al(In)GaN heterostructure; polarization and piezoelectric effect; nanostructures for wide bandgap materials; RF and power devices; display and illumination applications; novel design concepts; device simulation

(This special issue belongs to the Section D1: Semiconductor Devices)

Selected Papers from 5th International Conference on Microfluidic Handling Systems (MFHS2024)

edited by

Joost Lötters

and Martin Richter

submission deadline 30 Sep 2024 | 2 articles | Viewed by 2658 | Submission Open

III–V Compound Semiconductors and Devices, 2nd Edition

edited by Yeong-Her Wang and

Kuan-Wei Lee

submission deadline 30 Sep 2024 | 2 articles | Viewed by 2614 | Submission Open

Keywords: compound semiconductor; high-k dielectric; insulator; frequency; optoelectronic

(This special issue belongs to the Section D1: Semiconductor Devices)

Fusing Biology and Engineering: Manufacturing, Applications, and Future Trends in Bio-Hybrid Systems

edited by

Miriam Filippi

submission deadline 30 Sep 2024 | 1 articles | Viewed by 2486 | Submission Open

Keywords: bio-hybrid systems; bioelectronics; biosensors; tissue engineering; bionic bio-hybrid robots; microrobots; nanorobots; micromachines; soft robotics; bio-hybrid; bio-actuation; biomimetics; nano-bio interface; biological propulsion; micro-manipulation; bio-actuators; bio-integrated device; magnetic guidance; magnetic nanoparticles; organoid organ-on-a-chip; microfluidic

(This special issue belongs to the Section B2: Biofabrication and Tissue Engineering)

Development and Application of Advanced Precision Vibration Isolation Systems

edited by

Min Wang

and Jinglei Zhao

submission deadline 30 Sep 2024 | 2 articles | Viewed by 2292 | Submission Open

Keywords: precision vibration isolation; active control; negative stiffness; multiple degrees of freedom; feedback control; feedforward control

(This special issue belongs to the Section E：Engineering and Technology)

Advanced Biomaterials and Biofabrication

edited by Yongcong Fang, Zhongwei Guo and

Kai Zheng

submission deadline 30 Sep 2024 | 1 articles | Viewed by 1434 | Submission Open

Keywords: biomaterials; biofabrication; 3D bioprinting; tissue engineering; stem cell

(This special issue belongs to the Section B：Biology and Biomedicine)

Advances in Photodetecting Materials, Devices and Applications

edited by

Zhanfeng Huang

submission deadline 30 Sep 2024 | 1 articles | Viewed by 956 | Submission Open

Keywords: photodetectors; optoelectronic materials; sensors; imaging

(This special issue belongs to the Section D：Materials and Processing)

Immunoassay Platforms for Biomedical Detection

edited by Jian Gu and Chao Wang

submission deadline 30 Sep 2024 | Viewed by 620 | Submission Open

Keywords: immunoassay; lateral/vertical flow assays; nano/microfluidics; nano/microscale biosensors; biosensor system integration; lab-on-a-chip; point-of-care testing; healthcare and environmental monitoring

(This special issue belongs to the Section B：Biology and Biomedicine)

Selected Papers from the 25th EuroSimE Conference

edited by Willem Van Driel and

Jiajie Fan

submission deadline 30 Sep 2024 | Viewed by 265 | Submission Open

Keywords: MEMS/NEMS; microelectronics; microsystems; reliability; simulation and modeling

(This special issue belongs to the Section A：Physics)

Carbon-Based Materials for Electrochemical Applications

edited by

Paulina Sierra-Rosales

and

Soledad Bollo

submission deadline 30 Sep 2024 | Viewed by 211 | Submission Open

Keywords: carbon materials; electrochemistry; nanomaterials; electrocatalysis; biomass; (bio)sensors; fuel cells; energy conversion/storage; batteries; environmental applications; biomedical applications; food safety

(This special issue belongs to the Section D：Materials and Processing)

Cell Assay Chips and Applications

edited by

Yu-Chih Chen

submission deadline 30 Sep 2024 | Viewed by 194 | Submission Open

Keywords: microfluidic cell assays; lab on a chip; micrototal analysis systems; micro-fabrication; high-throughput screening; single-cell analysis; drug screening; point-of-care diagnostics; 3D cell culture; environmental monitoring

(This special issue belongs to the Section B：Biology and Biomedicine)

Small and Soft: Nimble Robotics with Miniaturized and Flexible Designs

edited by

Miriam Filippi

submission deadline 30 Sep 2024 | Viewed by 190 | Submission Open

Keywords: small-scale robotics; soft robots; robotic applications; biomimetic designs; autonomous navigation

(This special issue belongs to the Section E：Engineering and Technology)

Terahertz and Infrared Metamaterial Devices, 3nd Edition

edited by

Xiaoguang Zhao

and

Rui You

submission deadline 30 Sep 2024 | Viewed by 183 | Submission Open

Keywords: design of terahertz and infrared metamaterials; micro/nanofabrication techniques for metamaterials; terahertz and infrared metamaterial components; terahertz detectors and imagers; infrared detectors and focal plane arrays; terahertz and infrared biological/chemical sensing; terahertz and infrared beamforming; communication based on metamaterials; application of terahertz and infrared metamaterials

(This special issue belongs to the Section A：Physics)

Microstructured Sensors: From Design to Application

edited by Mingliang Li and Ziwei Li

submission deadline 10 Oct 2024 | 5 articles | Viewed by 6193 | Submission Open

Keywords: microstructures; new materials biosensors; chemical sensors; self-assembled monolayer; optical sensors

(This special issue belongs to the Section D：Materials and Processing)

Shape Memory Alloys: Manufacturing and Micromachined Applications

edited by

Chanho Lee

submission deadline 10 Oct 2024 | 1 articles | Viewed by 3557 | Submission Open

Keywords: shape memory alloys; alloy design; manufacturing; microstructural characterization; mechanical properties; deformation mechanism; shape memory alloy based micromachined devices

(This special issue belongs to the Section D：Materials and Processing)

Future of RF/Microwave Filtering and Memristive Devices in Nowadays Mobile Networks

edited by

Milka Potrebic

and

Dejan Tošić

submission deadline 15 Oct 2024 | 8 articles | Viewed by 15648 | Submission Open

Keywords: RF/microwave filters; tunable/reconfigurable filters; multifunctional filtering devices; 3D printing; RF memristor; memristive devices; sensors

(This special issue belongs to the Section E：Engineering and Technology)

Piezoelectric Actuators and Sensors: Materials, Devices and Applications, 2nd Edition

edited by

Tian-Bing Xu

submission deadline 15 Oct 2024 | 3 articles | Viewed by 6103 | Submission Open

Keywords: piezoelectric materials; piezoelectric multilayer stacks and structures; piezoelectric sensors; piezoelectric actuators; piezoelectric transducers; piezoelectric vibrators nano; micro; additive and 3D printing manufacturing technologies for micromachined piezoelectric materials and devices; piezoelectric device applications

(This special issue belongs to the Section A：Physics)

Advanced Optical Manufacturing Technologies and Applications

edited by

Jiang Guo

, Yebing Tian, Zhenzhong Wang and Jianguo Zhang

submission deadline 15 Oct 2024 | Viewed by 394 | Submission Open

Keywords: optical precision processing technologies; ultra-precision machining technology; micro-nanostructure optics and manufacturing technologies

(This special issue belongs to the Section D：Materials and Processing)

Magnetic and Spin Devices, 3rd Edition

edited by

Viktor Sverdlov

submission deadline 20 Oct 2024 | 3 articles | Viewed by 3640 | Submission Open

Keywords: digital spintronics; spin-transfer torque (STT); spin-orbit torque (SOT); magnetoresistive random access memory (MRAM); in-memory computing; magnetic sensors; energy harvesting magnetic devices; artificial intelligence of things

(This special issue belongs to the Section D：Materials and Processing)

Recent Advances in Electromagnetic Devices

edited by Haejun Chung

submission deadline 30 Oct 2024 | 11 articles | Viewed by 13023 | Submission Open

Keywords: metamaterials; antenna; wireless power transfer; electromagnetic sensors; electromagnetic shielding; electromagnetic simulation; biomedical applications; terahertz technology; tunable metamaterials; beam forming; beam steering; optics; photonics; microwave

(This special issue belongs to the Section E：Engineering and Technology)

Micro Thermal Devices and Their Applications

edited by

Pamela Vocale

submission deadline 30 Oct 2024 | 5 articles | Viewed by 10616 | Submission Open

Keywords: microsystems; new microfabrication techniques; additive manufacturing; micro thermal devices; microscale cooling techniques; heat transfer enhancement

(This special issue belongs to the Section A：Physics)

MEMS Sensors and Actuators: Design, Fabrication and Applications

edited by

Lei Shao

,

Zhiran Yi

and

Ha Duong Ngo

submission deadline 30 Oct 2024 | 4 articles | Viewed by 8385 | Submission Open

Keywords: MEMS; ; Sensors; ; Actuators; ; Transducers; ; Microsystems; ; Microfabrication.

(This special issue belongs to the Section A：Physics)

Micromachines Research and Development in North America

edited by

Sima Noghanian

, Negar Ebadi and

George Shaker

submission deadline 30 Oct 2024 | 4 articles | Viewed by 5858 | Submission Open

Keywords: antenna design and miniaturization; microwave sensors and circuit miniaturization and design; sensors and actuators; bioelectronics and biosensors; electromagnetic compatibility and interference; millimeter-wave and terahertz technology; metamaterials and advanced materials; fabrication and measurement techniques; applications in industrial automation; radar; security; agriculture; IoT; health monitoring; etc.

Emerging Applications of Triboelectric Effects/Materials

edited by Zuankai Wang, Wanghuai Xu and Hao WU

submission deadline 30 Oct 2024 | 3 articles | Viewed by 5798 | Submission Open

Keywords: triboelectric effect; contact electrification; surface charges; energy harvesting; interfacial electric field; electrostatic surface sensing

(This special issue belongs to the Section A：Physics)

Microelectrodes and Microdevices for Electrochemical Applications

edited by Chen Peng and Pengtang Wang

submission deadline 30 Oct 2024 | 4 articles | Viewed by 4565 | Submission Open

Keywords: microelectrode; microdevices; electrochemical applications; electrocatalysis; electrosynthesis; batteries; sensors; chips

(This special issue belongs to the Section C：Chemistry)

Recent Advances in Lab-on-a-Chip and Their Biomedical Applications

edited by

Guoqing Hu

and Xiaoyan Liu

submission deadline 30 Oct 2024 | 2 articles | Viewed by 1964 | Submission Open

Keywords: lab on a chip; organ on a chip; microfluidics; biomedical applications; drug screening; high-throughput analysis; point-of-care diagnostics; lab-on-a-chip devices; microfluidic separation; disease diagnosis; biochips; micrototal analysis systems (μ TASs)

(This special issue belongs to the Section B：Biology and Biomedicine)

Applications of Magnetoelectric Nanoparticles in Micro- and Nanotechnologies

edited by

Zeinab Ramezani

and Manuel Alberteris Campos

submission deadline 30 Oct 2024 | Viewed by 216 | Submission Open

Keywords: magnetoelectric nanoparticles; modeling and simulation; nanomedicine and nanobiotechnologies; drug delivery systems and theranostics; neural stimulation; navigation of magnetoelectric nanoparticles

(This special issue belongs to the Section B：Biology and Biomedicine)

Novel Power Amplifiers and Integrated Circuits: Design and Applications

edited by Zhiqun Cheng and

Zhiwei Zhang

submission deadline 30 Oct 2024 | Viewed by 204 | Submission Open

Keywords: wireless communication; advanced RF power amplifiers and chips; applications of power amplifier chips

(This special issue belongs to the Section E：Engineering and Technology)

Microfluidic-Based Sensing

edited by

Jeong-Yeol Yoon

and Kattika Kaarj

submission deadline 30 Oct 2024 | Viewed by 180 | Submission Open

Keywords: biosensors; point-of-care diagnostics; rapid test; drug test; environmental monitoring; high-throughput analysis; microfabrication; machine learning

(This special issue belongs to the Section E：Engineering and Technology)

MEMS/NEMS Devices and Applications, 2nd Edition

edited by

Ching-Liang Dai

,

Yao-Chuan Tsai

and Zhi-Xuan Dai

submission deadline 31 Oct 2024 | 7 articles | Viewed by 11291 | Submission Open

Keywords: physical sensors; force sensors; magnetic sensors; optical sensors; microphones; flow sensors; thermal sensors; chemical sensors; biosensors; gas sensors; actuators; resonators/filters; switches/relays; energy harvesters; lens/mirrors

(This special issue belongs to the Section E：Engineering and Technology)

Recent Advances in Emerging Transistor Technologies and Their Applications

edited by

Fawnizu Azmadi Hussin

,

Furqan Zahoor

,

Haider Abbas

and Faisal Bashir

submission deadline 31 Oct 2024 | 6 articles | Viewed by 11177 | Submission Open

Keywords: novel semiconductor materials; CNTFETs; neuromorphic computing; nanoscale devices; MOSFET circuits; logic design

(This special issue belongs to the Section E：Engineering and Technology)

Advances in Microelectronics Reliability

edited by

Joseph Bernstein

and Emmanuel Bender

submission deadline 31 Oct 2024 | 5 articles | Viewed by 10024 | Submission Open

Keywords: multiple mechanisms; reliability; physics of failure; GaN; SiC; nanoscale; BTI; FINFET; HCI; TDDB

(This special issue belongs to the Section A：Physics)

Recent Progress of Lab-on-a-Chip Assays

edited by

,

,

,

and

submission deadline 31 Oct 2024 | 5 articles | Viewed by 8854 | Submission Open

Keywords: 3D printed devices; wearable devices; biosensors; point-of-care testing; lateral flow assays; immunoassay; nanomaterials; additive manufacturing.

(This special issue belongs to the Section B：Biology and Biomedicine)

Energy Conversion and Storage Devices: Materials and Applications

edited by