Skip to Content

153 Results Found

  • Article
  • Open Access
2 Citations
2,439 Views
21 Pages

15 December 2022

The present paper investigates the impact of basalt fiber reinforced polymer (BFRP) on the axial compression performance of glued wood hollow cylinders. This study aims to facilitate the application of BFRP in the field of structural reinforcement of...

  • Article
  • Open Access
15 Citations
3,170 Views
14 Pages

SEM Analysis of Glued Joints of Thermally Modified Wood Bonded with PUR and PVAc Glues

  • Miroslava Mamoňová,
  • Dávid Ciglian and
  • Ladislav Reinprecht

16 September 2022

This study deals with the scanning electron microscopy (SEM) analyses of the phase interfaces in the glued joints between Norway spruce wood elements thermally modified at 160, 180, 200, and 220 °C/4 h and polyurethane (PUR) and polyvinyl acetate...

  • Article
  • Open Access
2 Citations
2,629 Views
12 Pages

Research on Gluing Properties of Thick Bamboo-Wood-Oriented Strand Boards

  • Bajin Yang,
  • Xu Guo,
  • Wu Chen,
  • Xingyu Wang and ,
  • Guanben Du and
  • Chunlei Dong
  • + 1 author+ 0 author

19 October 2023

This study investigated the effects of adhesive resination and bamboo strand content on the physical and mechanical properties of thick Bamboo-Wood-oriented strand board (BWOSB), such as the air dry density (ADD), internal bond strength (IB), water a...

(This article belongs to the Special Issue Advances in Preparation and Modification of Wood-Based Materials)
  • Article
  • Open Access
3 Citations
3,501 Views
14 Pages

Optimization of Starch–Tannin Adhesives for Solid Wood Gluing

  • Annalisa Magnabosco,
  • Illya Kulyk,
  • Maurizio Avancini,
  • Primož Šket and ,
  • Jonas Eckardt,
  • Emanuele Cesprini,
  • Francesco Marinello and
  • Gianluca Tondi
  • + 3 authors+ 0 author

14 June 2024

Bio-based solutions for solid timber gluing have always been a very sensitive topic in wood technology. In this work, we optimize the gluing conditions of a starch–tannin formulation, which allows high performance in dry conditions and resistan...

(This article belongs to the Section Biobased and Biodegradable Polymers)
  • Article
  • Open Access
4 Citations
3,418 Views
15 Pages

16 June 2020

In this work a mathematical model and simulation for the gluing of wood particles designated for particleboards is presented. The aim is to obtain a better understanding of the gluing process. Thus, the behaviour of wood particles during gluing is in...

(This article belongs to the Special Issue Advances in Statistical Process Control and Their Applications)
  • Article
  • Open Access
15 Citations
3,340 Views
23 Pages

18 February 2022

In this paper, dynamic analyses of two untypical, modern footbridges made of glued-laminated timber are presented. One of them is among the longest cable-stayed bridges for pedestrians in the world, made of such a structural material. Both structures...

(This article belongs to the Section Advanced Materials Characterization)
  • Article
  • Open Access
32 Citations
5,486 Views
9 Pages

Deformability of Glued Laminated Beams with Combined Reinforcement

  • Justyna Sobczak-Piąstka,
  • Svyatoslav S. Gomon,
  • Mykola Polishchuk,
  • Sviatoslav Homon and ,
  • Petro Gomon and
  • Victor Karavan
  • + 1 author+ 0 author

Wood is one of the most popular renewable natural materials. Nowadays, raw wood is hardly ever used in the construction industry. It has been substituted by glued laminated wood that is processed with the use of high-tech methods, thus eliminating th...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
17 Citations
3,300 Views
12 Pages

Investigations into the Influence of Temperature on the Tensile Shear Strength of Various Adhesives

  • Arkadiusz Bernaczyk,
  • André Wagenführ,
  • Christian Terfloth,
  • Jörg Lincke and ,
  • Tomasz Krystofiak and
  • Peter Niemz
  • + 1 author+ 0 author

12 September 2023

The temperature resistance of glued timber, which is crucial for glued wood construction, represents a significant assessment criterion. To gain insights into this aspect, this study utilized methods such as a shear strength test in accordance with E...

(This article belongs to the Special Issue Trends on the Wood Materials and Technologies)
  • Article
  • Open Access
4 Citations
2,000 Views
18 Pages

20 December 2024

Dowel connectors are extensively utilized to establish joint connections in timber constructions. This study investigated the embedment performance of glued laminated bamboo and timber composite joints through half-hole tests, focusing on the effects...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
10 Citations
2,771 Views
15 Pages

Effects of Plasma Treatment on the Surface Characteristics and Bonding Performance of Pinus massoniana Wood

  • Yuan Tu,
  • Jiankun Liang,
  • Liping Yu,
  • Zhigang Wu and ,
  • Xuedong Xi,
  • Bengang Zhang,
  • Meifen Tian,
  • De Li and
  • Guoming Xiao
  • + 4 authors+ 0 author

29 June 2023

Rosin has a great influence on the bonding of Pinus massoniana wood, and surface modification is an important way to solve this problem. In this study, Pinus massoniana wood was treated by plasma, and the effects of plasma treatment on the bonding pe...

(This article belongs to the Special Issue Advances in the Sustainable Development and High-Value Utilization of Forestry Resources)
  • Article
  • Open Access
5 Citations
2,914 Views
14 Pages

Feasibility of Bonding High-Moisture-Content Wood Using Nothofagus chilean Species

  • Víctor Rosales,
  • Gonzalo Rodríguez-Grau,
  • Carlos Galarce,
  • Claudio Montero and ,
  • Claudia Alvarado,
  • Lisa Muñoz and
  • Régis Pommier
  • + 2 authors+ 0 author

7 December 2023

Appraising and protecting forests requires a management plan and the creation of innovative products for the market. The development of the green gluing technique could add value to native timber. However, there is a lack of knowledge concerning the...

(This article belongs to the Section Wood Science and Forest Products)
  • Article
  • Open Access
4 Citations
4,952 Views
13 Pages

Changes in the Vietnamese Timber Processing Industry: A Case of Quang Tri Province, North Central Region

  • Seiji Iwanaga,
  • Dang Thai Hoang,
  • Hirofumi Kuboyama,
  • Dang Thai Duong and ,
  • Hoang Huy Tuan and
  • Nguyen Van Minh
  • + 1 author+ 0 author

24 July 2021

Vietnam’s forestry policies have expanded the area of planted forests in order to meet the supply of raw materials for the timber processing industry. However, the diversity and volume of demand in the industry have also increased, and a shortage of...

(This article belongs to the Section Forest Economics, Policy, and Social Science)
  • Article
  • Open Access
6 Citations
3,302 Views
16 Pages

Bibliometric Analysis of the Green Gluing Technique (2000–2020): Trends and Perspectives

  • Gonzalo Rodríguez-Grau,
  • Carlos Marín-Uribe,
  • Patricio Cortés-Rodríguez,
  • Claudio Montero and ,
  • Víctor Rosales and
  • Carlos Galarce
  • + 1 author+ 0 author

18 October 2022

Wood is a sustainable and renewable material with a lower carbon footprint than other materials. However, its transformation into engineered products industrially, such as glulam, requires kiln drying, which implies energy consumption and loss of woo...

(This article belongs to the Section Wood Science and Forest Products)
  • Article
  • Open Access
5 Citations
2,658 Views
10 Pages

GL Beams Reinforced with Plywood in the Outer Layer

  • Dorota Dziurka,
  • Adam Derkowski,
  • Marek Wieruszewski,
  • Marcin Kuliński and
  • Radosław Mirski

2 June 2022

Glulam beams are increasingly used in the construction industry because of their high strength and the possibility of using round timber with smaller cross-sections. The load-bearing capacity of beams is strongly related to the quality of the outer l...

(This article belongs to the Special Issue Innovative Approaches for Cellulose-Containing Materials)
  • Article
  • Open Access
16 Citations
3,703 Views
26 Pages

Rotational Stiffness and Carrying Capacity of Timber Frame Corners with Dowel Type Connections

  • Marek Johanides,
  • David Mikolasek,
  • Antonin Lokaj,
  • Petr Mynarcik and ,
  • Zuzana Marcalikova and
  • Oldrich Sucharda
  • + 1 author+ 0 author

3 December 2021

With the development of wooden structures and buildings, there is a need to research physical and numerical tests of wood-based structures. The presented research is focused on construction and computational approaches for new types of joints to use...

(This article belongs to the Special Issue Behavior of Metallic and Composite Structures (Third Volume))
  • Article
  • Open Access
13 Citations
3,083 Views
11 Pages

Mechanical Characterization of Glued Laminated Beams Containing Selected Wood Species in the Tension Zone

  • Adam Derkowski,
  • Marcin Kuliński,
  • Adrian Trociński,
  • Jakub Kawalerczyk and
  • Radosław Mirski

14 September 2022

The aim of this study was to determine the mechanical properties of laminated beams containing selected wood species in the tension zone using a four-point bending test. Three beam types were manufactured with respect to the timber used in the tensio...

(This article belongs to the Special Issue Trends on the Wood Materials and Technologies)
  • Article
  • Open Access
22 Citations
5,133 Views
13 Pages

The Usefulness of Pine Timber (Pinus sylvestris L.) for the Production of Structural Elements. Part II: Strength Properties of Glued Laminated Timber

  • Radosław Mirski,
  • Dorota Dziurka,
  • Monika Chuda-Kowalska,
  • Jakub Kawalerczyk and ,
  • Marcin Kuliński and
  • Karol Łabęda
  • + 1 author+ 0 author

11 September 2020

The paper assessed the feasibility of manufacturing glued structural elements made of pine wood after grading it mechanically in a horizontal arrangement. It was assumed that the pine wood was not free of defects and that the outer lamellas would als...

(This article belongs to the Special Issue Behavior of Metallic and Composite Structures (Second Volume))
  • Article
  • Open Access
7 Citations
4,130 Views
19 Pages

To improve wood structure processing efficiency, a palletizing robot suitable for loading and unloading glued laminated timber (GLT) has been developed. The robot comprises a six-axis connecting rod mechanism and a sponge sucker as a grasping actuato...

(This article belongs to the Special Issue Data Analysis and Modelling of Buildings, Environments, Building Materials, and Sustainability)
  • Article
  • Open Access
1 Citations
1,521 Views
35 Pages

6 April 2026

The precise segmentation of small-sized defects on wood surfaces is critical for the quality grading of glued laminated timber (GLT). Existing semantic segmentation models face core bottlenecks in this context: high miss rates, blurred boundary local...

(This article belongs to the Section Smart Agriculture)
  • Article
  • Open Access
5 Citations
2,858 Views
14 Pages

The Adhesion Performance in Green-Glued Finger Joints Using Different Wood Ring Orientations

  • Gonzalo Rodríguez-Grau,
  • Pierre-Louis Cordonnier,
  • Benjamín Navarrete,
  • Claudio Montero and ,
  • Claudia Alvarado,
  • Régis Pommier,
  • Víctor Rosales and
  • Carlos Galarce
  • + 3 authors+ 0 author

20 August 2024

Structural lumber is designed to meet the technical standards that ensure safety, cost-effectiveness, and sustainability. However, some tree species face limitations in their growth, which restricts their widespread use. An example of this is Nothofa...

(This article belongs to the Special Issue Timber's Green Revolution: Sustainable Construction from Start to Finish)
  • Article
  • Open Access
3 Citations
2,998 Views
14 Pages

The Influence of Alternating Lower and Higher Temperatures on the Bending Characteristics of Glued Norway Spruce (Picea abies (L.) H. Karst.) and European Larch (Larix decidua Mill.) Wood

  • Miroslav Gašparík,
  • Elham Karami,
  • Fatemeh Rezaei,
  • Tomáš Kytka and ,
  • Sumanta Das and
  • Doubravka Lesáková
  • + 1 author+ 0 author

22 February 2022

This article deals with the effect of alternating lower (freezing) and higher (heating) temperatures on the static bending characteristics of glued Norway spruce (Picea abies (L.) H. Karst.) and European larch (Larix decidua Mill.) wood. Two types of...

(This article belongs to the Section Wood Science and Forest Products)
  • Article
  • Open Access
1 Citations
614 Views
39 Pages

An Implementation Strategy for VOC Emissions Eco-Labeling in Wood Products for the Chilean Market with International Projection

  • Gabriel Cereceda-Balic,
  • Marcela Vidal-Vega,
  • Mario Núñez-Decap and
  • Cecilia Fuentealba-Becerra

9 June 2026

This study examines the global wood products market to propose an eco-label for the Chilean sector with an international orientation. A national prior certification framework and governance structure were established, aligned with international regul...

  • Article
  • Open Access
2 Citations
1,406 Views
20 Pages

22 September 2025

Recent studies have confirmed the effectiveness of using natural fibers and fiber-reinforced polymer (FRP) composites as methods to improve the mechanical properties of timber structures. This improvement is particularly evident in static and dynamic...

(This article belongs to the Section Advanced Composites)
  • Article
  • Open Access
10 Citations
3,063 Views
15 Pages

Investigations on the Characterization of Various Adhesive Joints by Means of Nanoindentation and Computer Tomography

  • Arkadiusz Bernaczyk,
  • André Wagenführ,
  • Robert Zboray,
  • Alexander Flisch and ,
  • Thomas Lüthi,
  • Birgit Vetter,
  • Mario Rentsch,
  • Christian Terfloth,
  • Jörg Lincke and
  • Peter Niemz
  • + 6 authors+ 1 author

2 December 2022

The mechanical properties of cured wood adhesive films were tested in a dry state by means of nanoindentation. These studies have found that the application of adhesives have an effect on the accuracy of the hardness and elastic modulus determination...

(This article belongs to the Section Advanced Composites)
  • Article
  • Open Access
1,038 Views
20 Pages

Flexural Performance of Glued Laminated Timber Beams Reinforced by the Cross-Section Increasing Method

  • Tong Wang,
  • Xuetong Wang,
  • Nan Guo,
  • Mingtao Wu and ,
  • Ziyang Wu and
  • Mingyang Liang
  • + 1 author+ 0 author

24 December 2025

This article addresses the problem of insufficient bearing capacity and stiffness in laminated timber beams during use and proposes a reinforcement method by increasing the cross-section. Twenty glued laminated timber beams with dimensions of 2850 mm...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
7 Citations
2,572 Views
12 Pages

Preparation of Environmentally Friendly Glueless Boxwood Timber by Acidic Environmental Treatment and High-Temperature Pressing

  • Hongfei Huo,
  • Feifei Song,
  • Yang Yang,
  • Lei Zhang and ,
  • Xu Zhang,
  • Jijuan Zhang,
  • Kong Yue and
  • Zhongfeng Zhang
  • + 3 authors+ 0 author

20 December 2022

In the context of high-quality development, environmental issues are being paid more and more attention to, and the release of free formaldehyde has become a major problem that needs to be solved. Glueless plywood mainly adopts natural substances as...

(This article belongs to the Section Biobased and Biodegradable Polymers)
  • Article
  • Open Access
4 Citations
3,221 Views
25 Pages

20 December 2024

Glued wood is one of the most commonly used materials made of wood. Glued wood has many advantages related to its strength characteristics and operation. Nevertheless, due to the use of an adhesive base, it becomes necessary to carefully approach the...

(This article belongs to the Collection Buildings and Fire Safety)
  • Article
  • Open Access
16 Citations
4,221 Views
11 Pages

Influence of Citric Acid on the Bond Strength of Beech Wood

  • Goran Mihulja,
  • Vjekoslav Živković,
  • Dominik Poljak,
  • Bogoslav Šefc and
  • Tomislav Sedlar

20 August 2021

In this study, beech wood (Fagus silvatica L.) has been chemically modified with citric acid (Acidum citricum) and sodium hypophosphate (SHP) as the catalyst and gradually thermo-condensed in the dryer. Afterwards, wetting angle, surface energy, and...

(This article belongs to the Special Issue Durability and Modification of Wood Surfaces)
  • Article
  • Open Access
5 Citations
2,309 Views
13 Pages

16 December 2022

This work aimed to determine the gluability of pressure-impregnated pine wood with two protection agents used in production technologies for garden equipment and their effect on the strength, water resistance and thermal resistance of joints, as well...

(This article belongs to the Special Issue Trends on the Wood Materials and Technologies)
  • Article
  • Open Access
5 Citations
3,535 Views
19 Pages

UV Irradiation of Wood Surface: Bonding Properties

  • Tomislav Gržan,
  • Lucianna Grieco,
  • Vjekoslav Živković and
  • Goran Mihulja

31 May 2023

Various surface modification techniques have been developed to improve synthetic polymer surfaces’ wetting, adhesion, and printing by adding various functional (polar) groups. UV irradiation has been proposed as a suitable procedure to achieve...

(This article belongs to the Special Issue Recent Advances in Polymer Processing)
  • Article
  • Open Access
2 Citations
2,311 Views
17 Pages

23 May 2023

Wood-based sandwich panels are building products composed of two skins attached to a lightweight continuous core in which at least one skin is made of wood-based products, contributing to the use of renewable forest goods. Since the connection betwee...

(This article belongs to the Special Issue Wood Quality and Mechanical Properties)
  • Article
  • Open Access
2 Citations
3,041 Views
13 Pages

Increasing the Strength of the Glue Line in the Production of Thermally Modified Wood Paneling

  • Ruslan Rushanovich Safin,
  • Aigul Ravilevna Shaikhutdinova,
  • Ruslan Khasanshin,
  • Shamil Mukhametzyanov and
  • Albina Safina

20 February 2021

This work is devoted to the study of the effect of ultraviolet rays for the surface activation of pine wood thermally modified at temperatures of 180−240 °C in order to increase the surface roughness, enhance the wettability of thermal wood and the a...

(This article belongs to the Special Issue Physicochemical Surface Treatment of Wood Raw Materials)
  • Article
  • Open Access
8 Citations
3,751 Views
18 Pages

Predicted and Experimental Bending Behaviour of Glulam Bonded by RPF Adhesive

  • Tomáš Kytka,
  • Miroslav Gašparík,
  • Lukáš Sahula,
  • David Novák and ,
  • Elham Karami,
  • Sumanta Das and
  • Martin Sviták
  • + 2 authors+ 0 author

21 January 2024

In this study, alder, spruce, and beech woods were used for homogeneous symmetric, inhomogeneous symmetric (combined) and inhomogeneous non-symmetric glued laminated timber (glulam) beams glued with resorcinol phenol formaldehyde (RPF) adhesive. The...

  • Article
  • Open Access
1 Citations
1,468 Views
23 Pages

10 January 2026

In modern construction, natural materials with a low carbon footprint and full recyclability are becoming increasingly important. A typical group here is products made from solid wood, including glued wood, plywood, and wood-based composites. With th...

(This article belongs to the Special Issue Low-Impact Materials and Construction Strategies for Sustainable and Resilient Buildings)
  • Article
  • Open Access
3 Citations
4,828 Views
18 Pages

Burning Properties of Combined Glued Laminated Timber

  • Tomáš Kytka,
  • Miroslav Gašparík,
  • David Novák,
  • Lukáš Sahula and ,
  • Elham Karami and
  • Sumanta Das
  • + 1 author+ 0 author

16 January 2024

This study delved into the combustion properties of combined glulam bonded using polyurethane (PUR) and resorcinol-phenol-formaldehyde (RPF) adhesives. The experiment involved three distinct wood species, namely, spruce, alder, and beech, which were...

  • Article
  • Open Access
9 Citations
5,046 Views
11 Pages

Ability to Glue Portuguese Eucalyptus Elements

  • Aiuba Suleimana,
  • Caroline S. Sena,
  • Jorge M. Branco and
  • Aires Camões

Portuguese forests have changed in recent years. These changes were mainly boosted by the wildfires that affected a significant percentage of the softwood area. Eucalyptus is actually the dominant wood species in Portuguese forests. This is not a nat...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
12 Citations
3,353 Views
11 Pages

Wood from Forest Residues: Technological Properties and Potential Uses of Branches of Three Species from Brazilian Amazon

  • Letícia da Silva Moreira,
  • Fernando Wallase Carvalho Andrade,
  • Bruno Monteiro Balboni and
  • Victor Hugo Pereira Moutinho

7 September 2022

Branch wood presents potential volumetry that may have several applications, and its use may improve forest management efficiency in the Amazon. However, there is a lack of knowledge regarding the properties of branch wood when compared to the stem o...

(This article belongs to the Section Sustainable Forestry)
  • Article
  • Open Access
1 Citations
2,301 Views
12 Pages

Research Concerning the Bending Properties of Reconstituted Spruce Lumber Boards, Obtained by Edge-Cutting at 45° and Gluing

  • Mihaela Porojan,
  • Markus Brandstetter,
  • Mihai Ispas,
  • Bogdan Bedelean and
  • Mihaela Campean

25 October 2021

The best-possible valorization of each cut log is a priority. The aim of this research was to evaluate the potential of a solution for increasing the conversion efficiency of tapered logs, by edge-cutting the narrowest sideboards at 45° and joining t...

  • Article
  • Open Access
3 Citations
2,614 Views
17 Pages

Experimental and Numerical Analyses of Timber–Steel Footbridges

  • Jozef Gocál,
  • Josef Vičan,
  • Jaroslav Odrobiňák,
  • Richard Hlinka and ,
  • František Bahleda and
  • Agnieszka Wdowiak-Postulak
  • + 1 author+ 0 author

5 April 2024

In addition to traditional building materials, such as steel and concrete, wood has been gaining increasing prominence in recent years. In the past, the use of wood was limited due to its susceptibility to damage by fungi, insects, and temperature. T...

  • Article
  • Open Access
11 Citations
3,306 Views
11 Pages

Polystyrene-Impregnated Glulam Resistance to Subterranean Termite Attacks in a Laboratory Test

  • Yusuf Sudo Hadi,
  • Dede Hermawan,
  • Imam Busyra Abdillah,
  • Mahdi Mubarok and ,
  • Wa Ode Muliastuty Arsyad and
  • Rohmah Pari
  • + 1 author+ 0 author

24 September 2022

This study aimed to enhance tropical fast-growing tree species’ resistance to subterranean termite (Coptotermes curvignathus) attacks through the manufacturing of polystyrene glued-laminated timber (glulam). Three young tropical wood species, n...

(This article belongs to the Special Issue Durability and Degradation of Polymeric Materials)
  • Article
  • Open Access
42 Citations
6,862 Views
13 Pages

Preparation of High Strength Plywood from Partially Delignified Densified Wood

  • Matthias Jakob,
  • Gregor Stemmer,
  • Ivana Czabany,
  • Ulrich Müller and
  • Wolfgang Gindl-Altmutter

11 August 2020

Wood and natural fibers exhibit an advantageous combination of good mechanics at comparably low density. Nevertheless, comparing absolute strength and stiffness, wood is clearly inferior to materials such as metals and engineered composites. Since th...

(This article belongs to the Special Issue Advances in Wood Composites III)
  • Review
  • Open Access
1,282 Views
28 Pages

9 August 2026

The growing demand for wood raw materials and the need to reduce pressure on forest resources are driving the search for alternative wood species for industrial applications. In this context, paulownia wood is a promising raw material for the product...

(This article belongs to the Special Issue Modern Wood-Based Materials for Sustainable Building (2nd Edition))
  • Review
  • Open Access
55 Citations
8,797 Views
13 Pages

11 July 2023

European beech is one of the dominating wood species in central Europe and the most abundant hardwood species in Austrian, German and Swiss forests. Today, it is predominantly used for the provision of energy and in the furniture industry. With the i...

(This article belongs to the Section Forest Ecology and Management)
  • Technical Note
  • Open Access
7 Citations
5,076 Views
4 Pages

Density Profile Analysis of Laminated Beech Veneer Lumber (BauBuche)

  • Nick Engehausen,
  • Jan T. Benthien,
  • Martin Nopens and
  • Jörg B. Ressel

5 May 2021

An irreversible swelling was detected in laminated beech veneer lumber within the initial moistening. Supported by the facts that the lay-up of the glued veneers is exposed to high pressure during hot pressing, and that the density of the finished ma...

(This article belongs to the Special Issue Wood Plastic Composites)
  • Article
  • Open Access
2 Citations
2,752 Views
15 Pages

The Application of Structural Adhesives in Glulam Beams: A Comparative Study

  • Leonor da Cunha Mastela,
  • Pedro Gutemberg de Alcântara Segundinho,
  • Fabricio Gomes Gonçalves,
  • Clara Gaspar Fossi de Souza and ,
  • Francisco Antônio Rocco Lahr,
  • Daniela Minini,
  • Michel Picanço Oliveira,
  • Maria Alice Romanha Belumat and
  • Caroline Palacio de Araujo
  • + 4 authors+ 0 author

5 September 2025

This study aimed to evaluate the adhesion behavior of wood from an E. urophylla × E. grandis clone using the application of melamine–urea–formaldehyde (MUF), resorcinol–formaldehyde (RF), and polyurethane (PUR) adhesives in te...

(This article belongs to the Special Issue Characterization and Numerical Simulation of Solid Wood and Engineered Wood Products)
  • Review
  • Open Access
30 Citations
6,472 Views
16 Pages

14 October 2024

Wood surface treatment aims to improve or reduce the surface activity of wood by physical treatment, chemical treatment, biological activation treatment or other methods to achieve the purpose of surface modification. After wood surface modification,...

(This article belongs to the Special Issue Surface Properties and Surface Treatments of Wood and Wood-Based Composites)
  • Article
  • Open Access
1 Citations
1,104 Views
13 Pages

Effect of Poly (Vinyl Alcohol) on the Properties of Cold-Setting Melamine–Urea–Formaldehyde Resin Adhesive

  • Jiankun Liang,
  • Bengang Zhang,
  • Longxu Wu,
  • Yuqi Yang and ,
  • Caihong Long,
  • Zhixian Song,
  • Hui Yang and
  • Zhigang Wu
  • + 3 authors+ 0 author

11 November 2025

This study investigates how poly (vinyl alcohol) (PVA) influences melamine–urea–formaldehyde (MUF) resin, particularly regarding tensile properties, bonding strength, water resistance, curing temperature, chemical structure, and microscop...

(This article belongs to the Special Issue Synthesis–Processing–Structure–Property Interrelationship of Multifunctional Polymeric Materials and Natural Polymers)
  • Article
  • Open Access
9 Citations
3,987 Views
12 Pages

2 July 2020

The springback effect in molded wood laminations within the elastic range has, to date, not yet been mathematically described. Once cured, residual internal stresses within the laminations cause the final form to deviate from that of the die. Test pi...

(This article belongs to the Special Issue Selected Contributions from WSE2019—The 15th Annual Meeting of the Northern European Network for Wood Science and Engineering)
  • Article
  • Open Access
9 Citations
3,533 Views
15 Pages

1 June 2022

Recycled recovered wood, for example, from historic buildings, containing biocides, fire retardants or anti-weather paints is an attractive material for manufacturing composite wood panels which can be used for decoration as well as load-bearing wall...

(This article belongs to the Topic Materials and Surface Treatment Processes Used for Engineering Applications)
  • Article
  • Open Access
10 Citations
4,828 Views
12 Pages

Lightweight Solid Wood Panels Made of Paulownia Plantation Wood

  • Marius Cătălin Barbu,
  • Helmut Radauer,
  • Alexander Petutschnigg,
  • Eugenia Mariana Tudor and
  • Markus Kathriner

12 October 2023

Light Paulownia seamless-edged glued solid wood panels (SWPs), single-layered and three-layered, were analyzed in this study. Both panel types were calibrated at a thickness of 19 mm, a dimension very often in demand on the SWP market, but produced w...

(This article belongs to the Special Issue International Conference Wood Science and Engineering in the Third Millennium - ICWSE 2023)

of 4