Skip to Content

8,441 Results Found

  • Article
  • Open Access
37 Citations
3,936 Views
16 Pages

31 October 2022

Chloride-induced corrosion of steel rebars is one of the major causes of the premature failures of reinforced concrete structures served in different environments. This paper investigates the semiconducting behaviour and corrosion resistance of the p...

(This article belongs to the Section Corrosion)
  • Article
  • Open Access
5 Citations
2,875 Views
14 Pages

Effect of N on the Microstructure and Wear Resistance of 4Cr13 Corrosion-Resistant Plastic Mold Steel

  • Yi Fan,
  • Jian Zhou,
  • Jinbo Gu,
  • Hongxiao Chi and ,
  • Dangshen Ma and
  • Guanli Xie
  • + 1 author+ 0 author

8 January 2024

The effect of N content on the microstructure and wear resistance of 4Cr13 corrosion-resistant plastic mold steel were investigated by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and tribometer. The results show...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
3 Citations
2,237 Views
13 Pages

Research on the Chloride Ion Corrosion Resistance of Cu-Sb-Added Low-Carbon Steel

  • Yuanyu Chen,
  • Zhengbing Meng,
  • Yuxiang Li and
  • Jialong Shen

22 May 2024

The corrosion resistance of low-carbon steel and two new low-alloy, corrosion-resistant steels containing Cu-Sb and Cu was studied in a simulated seawater environment. The effects of Cu and Sb on corrosion resistance were analyzed by an electrochemic...

(This article belongs to the Special Issue Environmentally-Assisted Degradation of Metals and Alloys)
  • Article
  • Open Access
4 Citations
2,932 Views
13 Pages

Enhancement of the Corrosion and Wear Resistance of an Epoxy Coating Using a Combination of Mullite Powder and PVB

  • Yan Zhao,
  • Huachao Ma,
  • Zhenglu Gao,
  • Ziyan Huang and ,
  • Yuanyuan Wu and
  • Kuilin Lv
  • + 1 author+ 0 author

3 January 2025

Currently, with the gradual development of corrosion-resistant materials, coatings often exhibit ultra-high hydrophobic properties while possessing corrosion resistance, complicating the preparation of corrosion-resistant coatings. To explore a novel...

(This article belongs to the Section Corrosion, Wear and Erosion)
  • Article
  • Open Access
12 Citations
5,517 Views
16 Pages

Corrosion Protection and Heat Resistance of Paints for Outdoor Use

  • Ilona Felhősi,
  • Lívia Molnárné Nagy,
  • Szilvia Horváth,
  • Tamás Pozman and ,
  • János Bognár,
  • Tamás Szabó and
  • Zsófia Keresztes
  • + 2 authors+ 0 author

29 March 2023

Innovative heat- and corrosion-resistant coating approaches, applicable in indirect-food-contact outdoor environments, have been developed. Two systems, a direct-to-metal single-layer, polysiloxane-based, oven-dried system and a bilayer, zinc phospha...

(This article belongs to the Special Issue Advance in Corrosion and Protection of Metals)
  • Review
  • Open Access
41 Citations
6,587 Views
21 Pages

16 June 2022

Microbiologically induced concrete corrosion (in wastewater pipes) occurs mainly because of the diffusion of aggressive solutions and in situ production of sulfuric acid by microorganisms. The prevention of concrete biocorrosion usually requires modi...

(This article belongs to the Collection Concrete and Building Materials)
  • Article
  • Open Access
3 Citations
2,185 Views
10 Pages

15 September 2023

Further improving the corrosion resistance of the ASTM Grade 13 (Gr13) titanium alloy was achieved by manipulating the cathodic modification effect. The cathodic modification of Gr13 was mainly related to the Ti2Ni precipitate, where minor Ru was con...

(This article belongs to the Special Issue Corrosion and Corrosion Inhibition of Metals and Their Alloys II)
  • Review
  • Open Access
23 Citations
7,055 Views
21 Pages

12 May 2023

The design and necessity of corrosion-resisting nanocarbon nanocomposites have been investigated for cutting-edge aerospace applications. In this regard, nanocarbon nanofillers, especially carbon nanotubes, graphene, nanodiamond, etc. have been used...

(This article belongs to the Collection Feature Papers for Applied Nano)
  • Article
  • Open Access
2 Citations
1,377 Views
22 Pages

Microstructure and Properties of Corrosion-Resistant Steel Produced by CASTRIP

  • Kai Lei,
  • Long Chen,
  • Hengchang Lu,
  • Xintong Lian and ,
  • Qingxiao Feng,
  • Hualong Li and
  • Han Dong
  • + 2 authors+ 0 author

24 June 2025

The CASTRIP process is an innovative method for producing flat rolled low-carbon and low-alloy steel at very thin thicknesses. By casting steel close to its final dimensions, enormous savings in time and energy can be realized. In this paper, an ultr...

(This article belongs to the Section Crystalline Metals and Alloys)
  • Article
  • Open Access
53 Citations
8,650 Views
17 Pages

Passivation Characteristics of Alloy Corrosion-Resistant Steel Cr10Mo1 in Simulating Concrete Pore Solutions: Combination Effects of pH and Chloride

  • Zhiyong Ai,
  • Wei Sun,
  • Jinyang Jiang,
  • Dan Song and ,
  • Han Ma,
  • Jianchun Zhang and
  • Danqian Wang
  • + 2 authors+ 0 author

1 September 2016

The electrochemical behaviour for passivation of new alloy corrosion-resistant steel Cr10Mo1 immersed in alkaline solutions with different pH values (13.3, 12.0, 10.5, and 9.0) and chloride contents (0.2 M and 1.0 M), was investigated by various elec...

  • Article
  • Open Access
2 Citations
2,507 Views
22 Pages

Advantages of Corrosion-Resistant Overlay Welding on Steel S355J2N

  • Ferenc Tancsics,
  • Nikoletta Légmán,
  • László Varga and
  • Hajnalka Hargitai

31 March 2025

In this paper, the effects of overlay welding of S355J2N steel were studied. We examined how the technological advantages of overlay welding can be taken into account to improve the service lifetime and applicability of components made from tradition...

(This article belongs to the Special Issue Sustainable Metal Forming Materials and Technologies)
  • Review
  • Open Access
41 Citations
8,840 Views
16 Pages

28 March 2023

Electrocatalytic water splitting for hydrogen (H2) production has attracted more and more attention in the context of energy shortages. The use of scarce pure water resources, such as electrolyte, not only increases the cost but also makes applicatio...

(This article belongs to the Special Issue Advanced Electrocatalytic Materials for Energy and Environmental Applications)
  • Article
  • Open Access
3 Citations
1,351 Views
12 Pages

Research on the Application of Graphene Oxide-Reinforced SiO2 Corrosion-Resistant Coatings in the Long-Term Protection of Water Treatment Facilities

  • Youhua Zhang,
  • Zewen Zhu,
  • Huijie Zou,
  • Li Dai and ,
  • Huiting Liu,
  • Yao Rong,
  • Xizheng Chang,
  • Chundi Zheng and
  • Wei Han
  • + 4 authors+ 0 author

15 September 2025

The reaction tank of process wastewater, as one of the key pieces of equipment for wastewater treatment, is exposed to an acidic and alkaline wastewater immersion environment for a long time and is prone to the influence of complex ions in water, res...

(This article belongs to the Special Issue Advanced Water Monitoring and Treatment Technologies)
  • Article
  • Open Access
14 Citations
3,241 Views
14 Pages

Graphene-Assembled Film-Based Reconfigurable Filtering Antenna with Enhanced Corrosion-Resistance

  • Yueyue Hui,
  • Haoran Zu,
  • Rongguo Song,
  • Huaqiang Fu and ,
  • Kaolin Luo,
  • Chao Tian,
  • Bian Wu,
  • Guan-Long Huang,
  • Zongkui Kou and
  • Daping He
  • + 6 authors+ 1 author

29 April 2023

Corrosion-resistance is the key to improve the reliability and service lifespan of highly integrated reconfigurable filtering antennae. However, the conventional methodology for corrosion prevention cannot achieve desired effects, due to the limited...

(This article belongs to the Special Issue Emerging Low-Dimensional Materials II)
  • Article
  • Open Access
31 Citations
7,723 Views
21 Pages

Pitting Corrosion Behaviour of New Corrosion-Resistant Reinforcement Bars in Chloride-Containing Concrete Pore Solution

  • Jin-yang Jiang,
  • Yao Liu,
  • Hong-yan Chu,
  • Danqian Wang and ,
  • Han Ma and
  • Wei Sun
  • + 1 author+ 0 author

4 August 2017

In this study, the pitting behaviour of a new corrosion-resistant alloy steel (CR) is compared to that of low-carbon steel (LC) in a simulated concrete pore solution with a chloride concentration of 5 mol/L. The electrochemical behaviour of the bars...

  • Article
  • Open Access
14 Citations
3,413 Views
15 Pages

Corrosion Resistance of Coatings Based on Chromium and Aluminum of Titanium Alloy Ti-6Al-4V

  • Tetiana Loskutova,
  • Michael Scheffler,
  • Ivan Pavlenko,
  • Kamil Zidek and ,
  • Inna Pohrebova,
  • Nadiia Kharchenko,
  • Iryna Smokovych,
  • Oleksandr Dudka,
  • Volodymyr Palyukh and
  • Yaroslav Kononenko
  • + 6 authors+ 1 author

5 August 2024

Improvement of wear, corrosion, and heat-resistant properties of coatings to expand the operational capabilities of metals and alloys is an urgent problem for modern enterprises. Diffusion titanium, chromium, and aluminum-based coatings are widely us...

(This article belongs to the Special Issue Novel Approaches in the Design, Simulation, and Manufacturing for Processes and Systems)
  • Article
  • Open Access
54 Citations
4,786 Views
12 Pages

Recent years, triboelectric nanogenerators (TENGs) have attracted increased attention from researchers worldwide. Owing to their conductivity and triboelectric characteristics, metal materials can be made as both triboelectric materials and conductiv...

  • Review
  • Open Access
65 Citations
14,243 Views
24 Pages

Highly efficient electric power generation from biomass/waste fuels becomes an important worldwide issue to prevent global warming. In these plants, severe high-temperature corrosion and erosion-corrosion damage occur in boiler tubes influenced by HC...

(This article belongs to the Special Issue High Temperature Coatings)
  • Article
  • Open Access
8 Citations
2,202 Views
13 Pages

Preparation and Investigation of Spherical Powder Made from Corrosion-Resistant 316L Steel with the Addition of 0.2% and 0.5% Ag

  • Mikhail A. Kaplan,
  • Artem D. Gorbenko,
  • Alexander Y. Ivannikov,
  • Sergey V. Konushkin and ,
  • Andrey A. Kirsankin,
  • Alexander S. Baikin,
  • Konstantin V. Sergienko,
  • Elena O. Nasakina,
  • Anna V. Mikhailova and
  • Mikhail A. Sevostyanov
  • + 11 authors+ 6 authors

8 November 2022

The paper describes the production and study of spherical powder made from corrosion-resistant 316L steel with the addition of 0.2% and 0.5% Ag. The study of granulometric composition, morphology, fluidity and bulk density, phase composition, microha...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
7 Citations
2,749 Views
14 Pages

Investigation of Antibacterial Properties of Corrosion-Resistant 316L Steel Alloyed with 0.2 wt.% and 0.5 wt.% Ag

  • Mikhail A. Kaplan,
  • Artem D. Gorbenko,
  • Alexander Y. Ivannikov,
  • Bakhyt B. Kartabaeva and ,
  • Sergey V. Konushkin,
  • Konstantin Y. Demin,
  • Alexander S. Baikin,
  • Konstantin V. Sergienko,
  • Elena O. Nasakina and
  • Mikhail A. Sevostyanov
  • + 11 authors+ 6 authors

29 December 2022

The article is devoted to the study of melted ingots, plates rolled from them, and the resulting spherical powder made of corrosion-resistant 316L steel with the addition of 0.2 wt.% and 0.5 wt.% Ag. The study of antibacterial properties, microstruct...

(This article belongs to the Special Issue Microstructure and Mechanical Properties of Steels - Volume II)
  • Article
  • Open Access
438 Views
14 Pages

20 August 2026

Corrosion-resistant coatings with a double-layer structure are deposited on the surface of S30408 stainless steel at welding currents of 170 A, 200 A, and 230 A using metal active gas (MAG) arc welding technology. The influence of welding current on...

(This article belongs to the Section Corrosion, Wear and Erosion)
  • Article
  • Open Access
5 Citations
3,081 Views
14 Pages

Effect of Temperature on the Morphology and Corrosion Resistance of Modified Boron Nitride Nanosheets Incorporated into Steel Phosphate Coating

  • Mustafa Muhammad,
  • Ruina Ma,
  • An Du,
  • Yongzhe Fan and ,
  • Xue Zhao,
  • Niu Jun and
  • Xiaoming Cao
  • + 2 authors+ 0 author

26 June 2023

In this study, the impact of various temperatures (25 °C, 45 °C, and 55 °C) on q235 steel specimens was studied to analyze the influence on the morphology and corrosion resistance of modified boron nitride nanosheets incorporated into the...

(This article belongs to the Topic Materials and Surface Treatment Processes Used for Engineering Applications)
  • Article
  • Open Access
484 Views
20 Pages

Effect of Sb on the Hot Ductility and Fracture Behavior of Low-Alloy Corrosion-Resistant Steel

  • Zhiwei Liu,
  • Wang Li,
  • Xiuhua Gao,
  • Linxiu Du and ,
  • Hongyan Wu and
  • Ruiqi Zhang
  • + 1 author+ 0 author

23 May 2026

The mechanism by which Sb influences the hot ductility and fracture behavior of corrosion-resistant steel within the temperature range of 650–1200 °C was systematically investigated using scanning electron microscopy (SEM) and electron prob...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
2 Citations
433 Views
20 Pages

Dynamic Recrystallization Behavior and Prediction Model of an Ultra-High-Strength Nickel-Based Corrosion-Resistant Alloy During Hot Deformation

  • Dadi Zhou,
  • Qubo He,
  • Gang Meng,
  • Pujie Gou and ,
  • Wei Jiang and
  • Tengzhong Zhang
  • + 1 author+ 0 author

29 June 2026

A recently developed high-strength nickel-based corrosion-resistant alloy has attracted increasing interest for drilling and production operations in unconventional oil and gas fields. Owing to its high resistance to media containing H2S, CO2 and chl...

(This article belongs to the Special Issue Investigation of Microstructural and Properties of Steels and Alloys)
  • Article
  • Open Access
45 Citations
5,814 Views
14 Pages

Mechanical Properties and Corrosion Resistance of NbTiAlSiZrNx High-Entropy Films Prepared by RF Magnetron Sputtering

  • Qiuwei Xing,
  • Haijiang Wang,
  • Mingbiao Chen,
  • Zhaoyun Chen and ,
  • Rongbin Li,
  • Peipeng Jin and
  • Yong Zhang
  • + 2 authors+ 0 author

13 April 2019

In this study, we designed and fabricated NbTiAlSiZrNx high-entropy alloy (HEA) films. The parameters of the radio frequency (RF) pulse magnetron sputtering process were fixed to maintain the N2 flux ratio at 0%, 10%, 20%, 30%, 40%, and 50%. Subseque...

(This article belongs to the Special Issue High-Entropy Materials)
  • Article
  • Open Access
6 Citations
2,440 Views
18 Pages

11 September 2024

In this work, a series of fluorinated microemulsions were synthesized using thermally decomposable N-dodecyl-N,N-dimethylamine N-oxide (LDAO) as surfactant. Then, polybutylene terephthalate nonwoven fabrics (PBT) were coated with microemulsion and he...

  • Article
  • Open Access
57 Citations
9,560 Views
14 Pages

The Passive Film Growth Mechanism of New Corrosion-Resistant Steel Rebar in Simulated Concrete Pore Solution: Nanometer Structure and Electrochemical Study

  • Jin-yang Jiang,
  • Danqian Wang,
  • Hong-yan Chu,
  • Han Ma and ,
  • Yao Liu,
  • Yun Gao,
  • Jinjie Shi and
  • Wei Sun
  • + 3 authors+ 0 author

14 April 2017

An elaborative study was carried out on the growth mechanism and properties of the passive film for a new kind of alloyed corrosion-resistant steel (CR steel). The passive film naturally formed in simulated concrete pore solutions (pH = 13.3). The co...

  • Article
  • Open Access
2 Citations
1,435 Views
14 Pages

21 August 2025

To enhance the safe service performance of corrosion-resistant tank steel, it is of significant importance to develop novel materials characterized by both high strength-toughness and a low yield ratio. In this study, four experimental steels with a...

  • Feature Paper
  • Review
  • Open Access
1,049 Citations
46,943 Views
18 Pages

Corrosion-Resistant High-Entropy Alloys: A Review

  • Yunzhu Shi,
  • Bin Yang and
  • Peter K. Liaw

5 February 2017

Corrosion destroys more than three percent of the world’s gross domestic product. Therefore, the design of highly corrosion-resistant materials is urgently needed. By breaking the classical alloy-design philosophy, high-entropy alloys (HEAs) possess...

(This article belongs to the Special Issue High-Entropy Alloys (HEAs))
  • Article
  • Open Access
1 Citations
2,176 Views
14 Pages

We present a corrosion-resistant quadrupole ion trap mass spectrometer (QIT-MS) for the direct detection of biosignature gasses in chemically reactive planetary atmospheres, such as Venusian clouds. The system employs a Paul trap with hyperbolic tita...

  • Review
  • Open Access
63 Citations
6,602 Views
21 Pages

A Review of Corrosion-Resistant PEO Coating on Mg Alloy

  • Chao Yang,
  • Pinghu Chen,
  • Wenxing Wu,
  • Liyuan Sheng and ,
  • Yufeng Zheng and
  • Paul K. Chu
  • + 1 author+ 0 author

9 April 2024

The corrosion problem of Mg alloy limits its application in many engineering fields. Plasma electrolytic oxidation (PEO) is an economical and eco-friendly technology that can create a dense oxide layer on Mg alloy, offering a solution to the corrosio...

(This article belongs to the Special Issue Investigation on Corrosion Behaviour of Metallic Materials)
  • Article
  • Open Access
499 Views
16 Pages

Combinatorial Evaluation of Corrosion Resistance of Ru-Based Alloys in Supercritical Acidic Fluids

  • Rikito Murakami,
  • Murugesan Naveenkarthik,
  • Kei Kamada and
  • Akira Yoshikawa

30 April 2026

Ruthenium (Ru) and its alloys exhibit high corrosion resistance in acidic environments; however, their corrosion behavior in supercritical acidic fluids remains unclear. In this study, the corrosion resistance of Ru–Mo–W and Ru–Mo&n...

(This article belongs to the Special Issue Metallic Materials Coatings and Their Wear, Corrosion, and Tribological Performances)
  • Article
  • Open Access
32 Citations
4,419 Views
13 Pages

Evaluating the Influence of Hydrophobic Nano-Silica on Cement Mixtures for Corrosion-Resistant Concrete in Green Building and Sustainable Urban Development

  • Mohammadfarid Alvansazyazdi,
  • Fabricio Alvarez-Rea,
  • Jhon Pinto-Montoya,
  • Majid Khorami and ,
  • Pablo M. Bonilla-Valladares,
  • Alexis Debut and
  • Mahdi Feizbahr
  • + 2 authors+ 0 author

26 October 2023

The use of hydrophobic nano-silica particles in concrete for improved corrosion resistance and durability has been explored in recent years, and its potential impact on sustainable urban development and green building practices has been studied. The...

(This article belongs to the Special Issue Green Building and Sustainable Urban Development)
  • Article
  • Open Access
1 Citations
379 Views
19 Pages

10 July 2026

The development of unconventional deep oil and gas resources requires 205 ksi high-Nb Ni-based corrosion-resistant alloys; however, the lack of hot-forming databases and processing maps for this grade has frequently resulted in hot cracking during in...

(This article belongs to the Special Issue Investigation of Microstructural and Properties of Steels and Alloys)
  • Review
  • Open Access
57 Citations
13,433 Views
23 Pages

20 January 2023

Metal corrosion leads to serious resource waste and economic losses, and in severe cases, it can result in catastrophic safety incidents. As a result, proper coatings are often employed to separate metal alloys from the ambient environment and thus p...

(This article belongs to the Special Issue Feature Papers in Entropic Alloys and Meta-Metals)
  • Review
  • Open Access
24 Citations
7,061 Views
23 Pages

23 October 2023

While magnesium alloys have garnered attention for their lightweight properties across diverse applications, their susceptibility to corrosion presents a formidable challenge. Recent years have witnessed the emergence of machine learning (ML) as a fo...

  • Review
  • Open Access
23 Citations
5,814 Views
24 Pages

A Review of Trends in Corrosion-Resistant Structural Steels Research—From Theoretical Simulation to Data-Driven Directions

  • Di Xu,
  • Zibo Pei,
  • Xiaojia Yang,
  • Qing Li and ,
  • Fan Zhang,
  • Renzheng Zhu,
  • Xuequn Cheng and
  • Lingwei Ma
  • + 3 authors+ 0 author

26 April 2023

This paper provides a review of models commonly used over the years in the study of microscopic models of material corrosion mechanisms, data mining methods and the corrosion-resistant performance control of structural steels. The virtual process of...

(This article belongs to the Special Issue Commemorating the Launch of the Section 'Metals and Alloys')
  • Article
  • Open Access
10 Citations
4,166 Views
15 Pages

27 March 2023

In order to meet the anticorrosion and wear resistance requirements of petroleum pipelines, we selected a polymer (FC) containing difunctional hydroxyl propyl acrylate (HPA) and perfluoroalkyl ethyl acrylate (TEAc-N) free radical polymerization to pr...

(This article belongs to the Special Issue Advanced Polymeric Materials and Coatings: Synthesis, Properties and Applications)
  • Article
  • Open Access
1,448 Views
15 Pages

Seawater Corrosion Resistance of Zr-Ti Combined Deoxidized Martensitic Stainless Steel

  • Qinghai Wu,
  • Shi Cheng,
  • Lei Huang,
  • Xuezhong Huang and ,
  • Zhihui Wang,
  • Chengyang Hu,
  • Arshad Sundas,
  • Afzal Marina,
  • Barkat Faiqa and
  • Kaiming Wu
  • + 5 authors+ 0 author

9 September 2025

Martensitic stainless steel is a commonly used stainless steel, and is widely used in daily production and life, but its high content of alloy elements increases its cost. This study aimed to develop low-cost martensitic stainless steel with excellen...

(This article belongs to the Special Issue Surface Engineering & Coating Technologies for Corrosion and Tribocorrosion Resistance—3rd Edition)
  • Article
  • Open Access
882 Views
16 Pages

Effect of Mo on Corrosion Performance of Inner Bottom Plate of Corrosion-Resistant Storage Tank Steel

  • Jun Hong,
  • Yuanyuan Chen,
  • Yongqi Yang,
  • Ruize Zhang and ,
  • Chuyan Zhou,
  • Qiang Yu and
  • Qingfeng Wang
  • + 2 authors+ 0 author

14 February 2026

To explore the improvement of the corrosion resistance of the inner bottom plate of corrosion-resistant storage tank steel and the effects and underlying mechanisms of varying molybdenum (Mo) contents (0Mo, 0.15 wt.%Mo, 0.30 wt.%Mo, and 0.60 wt.%Mo),...

(This article belongs to the Section Corrosion and Protection)
  • Article
  • Open Access
2 Citations
1,225 Views
19 Pages

Investigation of Corrosion Resistance of 60Si2MnA Spring Steel Coated with Zn-Al in Atmospheric Environments

  • Yurong Wang,
  • Hui Xiao,
  • Baolong Liu,
  • Shilong Chen and ,
  • Xiaofei Jiao,
  • Shuwei Song,
  • Wenyue Zhang and
  • Ying Jin
  • + 3 authors+ 0 author

8 July 2025

To investigate the corrosion resistance of 60Si2MnA spring steel coated with Zn-Al in a domestic atmospheric environment containing harmful salts, the corrosion environmental factors (temperature, humidity, deposited salts, and pH) were obtained thro...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
7 Citations
4,123 Views
17 Pages

30 July 2024

Long-term steel reinforcement corrosion greatly impacts reinforced concrete structures, particularly in marine and coastal settings. Concrete failure leads to human casualties, requiring extensive demolition and maintenance, which represents an ineff...

(This article belongs to the Special Issue Inclusion Metallurgy (2nd Edition))
  • Article
  • Open Access
41 Citations
5,747 Views
15 Pages

2 December 2018

Plasma electrolytic oxidation (PEO) coating was obtained on AZ31 Mg alloy using a direct current in a sodium silicate-based electrolyte with and without a carbon nanotube (CNT) additive. The surface morphology and phase composition of the PEO coating...

(This article belongs to the Special Issue Metals Functionalization via Plasma Electrolytic Oxidation)
  • Article
  • Open Access
26 Citations
5,882 Views
15 Pages

Hydrogen and Corrosion Resistance of Nickel Superalloys for Gas Turbines, Engines Cooled Blades

  • Alexander I. Balitskii,
  • Yuliia H. Kvasnytska,
  • Lyubomir M. Ivaskevych,
  • Kateryna H. Kvasnytska and ,
  • Olexiy A. Balitskii,
  • Inna A. Shalevska,
  • Oleg Y. Shynskii,
  • Jaroslaw M. Jaworski and
  • Jakub M. Dowejko
  • + 4 authors+ 0 author

20 January 2023

The paper presents the results of the analysis of the resistance to hydrogen and high-temperature salt corrosion of the developed alloy of the CM88Y type for the turbine blades of gas turbine engines for marine and power purposes in comparison with t...

(This article belongs to the Section J2: Thermodynamics)
  • Article
  • Open Access
3 Citations
1,286 Views
13 Pages

Preparation and Corrosion Resistance of Hydrothermal Coatings on LZ91 Mg–Li Alloy

  • Liu Yang,
  • Shiyuan Li,
  • Hao Peng,
  • Hao Jiang and ,
  • Yong Wang,
  • Yingping Guan and
  • Hongwang Zhang
  • + 2 authors+ 0 author

16 October 2025

A corrosion-resistant coating was fabricated on the surface of LZ91 Mg–Li alloy via a one-step hydrothermal method under varying reaction temperatures (70, 90, 110, and 130 °C). This involved immersing bare Mg–Li alloy substrates in a...

(This article belongs to the Section Corrosion, Wear and Erosion)
  • Article
  • Open Access
8 Citations
2,090 Views
12 Pages

Tuning Nanocrystalline Heterostructures for Enhanced Corrosion Resistance: A Study on Electrodeposited Ni Coatings

  • Wenyi Huo,
  • Zeling Zhang,
  • Xuhong Huang,
  • Yueheng Wang and ,
  • Shiqi Wang,
  • Xiaoheng Lu,
  • Shuangxiao Li,
  • Senlei Zhu,
  • Feng Fang and
  • Jianqing Jiang
  • + 5 authors+ 0 author

30 April 2025

Tailoring the microstructural heterogeneity of metallic coatings is a promising strategy for enhancing their corrosion resistance; however, its systematic optimization remains underexplored. Here in, we present a one-step, scalable electrodeposition...

(This article belongs to the Special Issue Corrosion Resistance of Innovative Composite Coatings Based on Nanoparticles)
  • Article
  • Open Access
5 Citations
3,152 Views
17 Pages

Influence of TiC Addition on Corrosion and Tribocorrosion Resistance of Cr2Ti-NiAl Electrospark Coatings

  • Konstantin A. Kuptsov,
  • Mariya N. Antonyuk,
  • Alexander N. Sheveyko,
  • Andrey V. Bondarev and
  • Dmitry V. Shtansky

18 February 2023

Marine and coastal infrastructures usually suffer from synergetic effect of corrosion and wear known as tribocorrosion, which imposes strict requirements on the structural materials used. To overcome this problem, novel composite wear- and corrosion-...

(This article belongs to the Special Issue Advanced Nano-Structured Hard Coatings: Design, Synthesis, and Applications)
  • Article
  • Open Access
23 Citations
3,917 Views
14 Pages

Microstructural Characterization and Corrosion-Resistance Behavior of Dual-Phase Steels Compared to Conventional Rebar

  • Hany S. Abdo,
  • Asiful H. Seikh,
  • Biplab Baran Mandal,
  • Jabair A. Mohammed and ,
  • Sameh A. Ragab and
  • Mohamed S. Abdo
  • + 1 author+ 0 author

23 November 2020

Dual-phase (DP) steels consist of a ferritic matrix dispersed with some percentage of martensite, which gives the material a good combination of strength and ductility, along with the capacity to absorb energy and enhanced corrosion protection proper...

(This article belongs to the Special Issue Microstructural and Mechanical Characterization of Alloys Volume II)
  • Article
  • Open Access
21 Citations
4,215 Views
20 Pages

Pulse Electrodeposited Super-Hydrophobic Ni-Co/WS2 Nanocomposite Coatings with Enhanced Corrosion-Resistance

  • Meijiao Wang,
  • Zixiao Xue,
  • Shaojiu Yan,
  • Jin He and ,
  • Qiuyue Shao,
  • Wen Ge and
  • Baodi Lu
  • + 2 authors+ 0 author

5 December 2022

The hydrophobicity and corrosion resistance of composite coatings can be effectively improved by changing the electrodeposition method and adding inorganic nanoparticles. In this work, the incorporation of WS2 nanoparticles significantly increased th...

  • Review
  • Open Access
12 Citations
3,108 Views
15 Pages

Corrosion-Resistant Organic Superamphiphobic Coatings

  • Yixing Qi,
  • Rong Wei,
  • Qiuli Zhang,
  • Anqing Fu and ,
  • Naixin Lv and
  • Juntao Yuan
  • + 1 author+ 0 author

In recent years, organic superhydrophobic coatings have emerged as a promising direction for the protection of metal substrates due to their excellent liquid-repelling properties. Nonetheless, these coatings face challenges such as poor mechanical ro...

(This article belongs to the Special Issue Corrosion Resistance, Mechanical Properties and Characterization of Metallic Materials and Coatings)

of 169