Search Results (44)

The availability and quality of organic seeds are critical challenges for organic farming, with nitrogen use efficiency (NUE) being crucial for improving productivity. This study, part of the H2020 BRESOV project, assessed the effects of three nutritional protocols (NPs) on eight broccoli genotypes (GEs), comprising two commercial F1 hybrids and six Sicilian landraces. The tested NPs included formulations containing Trichoderma species, organic nitrogen, and essential micronutrients such as iron, zinc, carbon, boron, manganese, molybdenum, and zinc. This trial was conducted on an organic farm in Adrano (CT). Plants were evaluated for key traits related to growth, development, and seed production. NUE was analyzed to measure the efficiency of nitrogen conversion from soil into seed production. Significant interactions between NPs and GEs were observed for all seed yield components and most morphometric traits, except for secondary branches and root width, varying significantly only among the tested genotypes. The Sicilian landraces Broccolo nero and Sparaceddi showed the highest seed yield, overcoming the productive performances of the commercial hybrids F₁ Marathon and Gentleman. Broccolo nero, grown using amino acid microbial consortia applied solely via fertigation (NP1), exhibited the highest NUE, indicating a positive nitrogen balance relative to seed yield and soil nitrogen content. Principal component analysis (PCA) grouped the genotypes into five distinct clusters based on the analyzed bio-morphometric traits and on the effect of the treatment. The Broccolo nero and Sparaceddi genotypes formed two distinct groups, clearly differentiated by their unique morphological traits related to plant biomass and seed production. Additionally, both genotypes exhibited distinct responses to the applied nutrition protocols, with positive results compared to the control condition. These results underscore the potential of the broccoli landraces for organic farming and breeding due to their adaptability, resilience, and superior NUE. Full article

The salinity of water and soil is a constraint that has an extreme effect on germination and the establishment of crops. Therefore, it is pivotal to boost crop salt tolerance in global semi-arid regions. By mixing Si in an ME medium, a new complex of nanoparticles (Si-CTS-HPC-ME NPs) was synthesized, and we investigated the role of Si-CTS-HPC-ME NPs on Cyamopsis tetragonoloba germination and tolerance against salinity stress. Thus, this study examined the influence of Si-CTS-HPC-ME NPs at different concentrations (N₁: 0, N₂: 40 and N₃: 80 mg L⁻¹) on some germination and seedling growth parameters and the ion homeostasis of Cyamopsis tetragonoloba L. (cluster bean) seedlings under three salinity levels (S₁: 0, S₂: 6 and S₃: 12 dS m⁻¹). With increasing salinity, the energy of germination (GE), index of germination (GI), index of vitality (VI), seedling vigor index (SVI), fresh weight (SFW) and dry (SDW) weight of seedlings, plumule length (PL), and radicle length (RL) parameters gradually decreased, while the mean germination time (MGT) and coefficient of velocity of germination (CVG) increased in salt-stressed cluster bean seedlings in comparison to the control. However, the usage of Si-CTS-HPC-ME NPs was effective in enhancing cluster bean tolerance to salinity by enhancing total phenols and flavonoids and improving K⁺, Si, and Ca²⁺ uptake, thus reducing lipid peroxidation, decreasing sodium ion uptake and potassium leakage, and promoting germination parameters compared with non-NP-treated seedlings. Meanwhile, 40 mg L⁻¹ Si-CTS-HPC-ME NPs exhibited an effective response in saline conditions compared with the other NP treatments. Consequently, the application of Si-CTS-HPC-ME NPs in salt-stressed cluster bean seedlings can serve as an effective technique to enhance salinity tolerance in saline conditions under arid and semi-arid climatic conditions. Full article

Drug delivery systems have revolutionized traditional drug administration methods by addressing various challenges, such as enhancing drug solubility, prolonging effectiveness, minimizing adverse effects, and preserving potency. Nanotechnology-based drug delivery systems, particularly nanoparticles (NPs) and nanofibers (NFs), have emerged as promising solutions for biomedicine delivery. NFs, with their ability to mimic the porous and fibrous structures of biological tissues, have garnered significant interest in drug-delivering applications. Biopolymers such as gelatin (Ge) and chitosan (CH) have gained much more attention due to their biocompatibility, biodegradability, and versatility in biomedical applications. CH exhibits exceptional biocompatibility, anti-bacterial activity, and wound healing capabilities, whereas Ge provides good biocompatibility and cell adhesion properties. Ge/CH-based NFs stimulate cellular connections and facilitate tissue regeneration owing to their structural resemblance to the extracellular matrix. This review explores the additive methods of preparation, including electrospinning, force pinning, and template synthesis, focusing on electrospinning and the factors influencing the fiber structure. The properties of Ge and CH, their role in drug release, formulation strategies, and characterization techniques for electrospun fibers are discussed. Furthermore, this review addresses applications in delivering active moieties in the management of orthopedics and wound healing with regulatory considerations, along with challenges related to them. Thus, the review aims to provide a comprehensive overview of the potential of Ge/CH-based NFs for drug delivery and biomedical applications. Full article

The in situ combination of plasma-enhanced chemical vapor deposition (PECVD) and vacuum evaporation in the same vacuum chamber allowed us to integrate germanium nanocrystals (Ge NCs) into hydrogenated amorphous silicon carbide (a-SiC:H) thin films deposited from monomethyl silane diluted with hydrogen. Transmission electron microscopy (TEM) and energy-dispersive X-ray (EDX) spectroscopy were used for the microscopic characterization, while photothermal deflection spectroscopy (PDS) and near-infrared photoluminescence spectroscopy (NIR PL) were for optical characterization. The presence of Ge NCs embedded in the amorphous a-Si:C:H thin films was confirmed by TEM and EDX. The embedded Ge NCs increased optical absorption in the NIR spectral region. The quenching of a-SiC:H NIR PL due to the presence of Ge indicates that the diffusion length of free charge carriers in a-SiC:H is in the range of a few tens of nm, an order of magnitude less than in a-Si:H. The optical properties of a-SiC:H films were degraded after vacuum annealing at 550 °C. Full article

Objectives: To design a multifunctional nanozyme hydrogel with antibacterial, photo-responsive nitric oxide-releasing, and antioxidative properties for promoting the healing of infected wounds. Methods: We first developed ultra-small silver nanoparticles (NPs)-decorated sodium nitroprusside-doped Prussian blue (SNPB) NPs, referred to as SNPB@Ag NPs, which served as a multifunctional nanozyme. Subsequently, this nanozyme, together with geniposide (GE), was incorporated into a thermo-sensitive hydrogel, formulated from Poloxamer 407 and carboxymethyl chitosan, creating a novel antibacterial wound dressing designated as GE/SNPB@Ag hydrogel. The physical properties of a GE/SNPB@Ag hydrogel were systematically investigated. Results: After embedding the nanozyme and GE, the resulting GE/SNPB@Ag hydrogel retains its thermosensitive properties and exhibits sustained release characteristics. In addition to its catalase-like activity, the nanozyme demonstrates high photothermal conversion efficiency, photo-induced nitric oxide release, and antibacterial activity. In addition, the hydrogel exhibits favorable antioxidant properties and high biocompatibility. The results of animal experiments demonstrate that the composite hydrogel combined with laser irradiation is an effective method for promoting infected wound healing. Conclusions: In vitro and in vivo studies indicate that the resulting GE/SNPB@Ag hydrogel holds significant potential for the treatment of infected wounds and for further clinical applications. Full article

We report the development of amperometric biosensors (ABSs) employing flavocytochrome b₂ (Fcb₂) coupled with nanoparticles (NPs) of noble metals on graphite electrode (GE) surfaces. Each NPs/GE configuration was evaluated for its ability to decompose hydrogen peroxide (H₂O₂), mimicking peroxidase (PO) activity. The most effective nanoPO (nPO) was selected for developing ABSs targeting L-lactate. Consequently, several Fcb₂/nPO-based ABSs with enhanced sensitivity to L-lactate were developed, demonstrating mediated ET between Fcb₂ and the GE surface. The positive effect of noble metal NPs on Fcb₂-based sensor sensitivity may be explained by the synergy between their dual roles as both PO mimetics and electron transfer mediators. Furthermore, our findings provide preliminary data that may prompt a re-evaluation of the mechanism of L-lactate oxidation in Fcb₂-mediated catalysis. Previously, it was believed that L-lactate oxidation via Fcb₂ catalysis did not produce H₂O₂, unlike catalysis via L-lactate oxidase. Our initial research revealed that the inclusion of nPO in Fcb₂-based ABSs significantly increased their sensitivity. Employing other PO mimetics in ABSs for L-lactate yielded similar results, reinforcing our hypothesis that trace amounts of H₂O₂ may be generated as a transient intermediate in this reaction. The presence of nPO enhances the L-lactate oxidation rate through H₂O₂ utilization, leading to signal amplification and heightened bioelectrode sensitivity. The proposed ABSs have been successfully tested on blood serum and fermented food samples, showing their promise for L-lactate monitoring in medicine and the food industry. Full article

Arsenic compounds have been used as therapeutic alternatives for several diseases including cancer. In the following work, we obtained arsenic nanoparticles (AsNPs) produced by an anaerobic bacterium from the Salar de Ascotán, in northern Chile, and evaluated their effects on the human oral squamous carcinoma cell line OECM-1. Resazurin reduction assays were carried out on these cells using 1–100 µM of AsNPs, finding a concentration-dependent reduction in cell viability that was not observed for the non-tumoral gastric mucosa-derived cell line GES-1. To establish if these effects were associated with apoptosis induction, markers like Bcl2, Bax, and cleaved caspase 3 were analyzed via Western blot, executor caspases 3/7 via luminometry, and DNA fragmentation was analyzed by TUNEL assay, using 100 µM cisplatin as a positive control. OECM-1 cells treated with AsNPs showed an induction of both extrinsic and intrinsic apoptotic pathways, which can be explained by a significant decrease in P-Akt/Akt and P-ERK/ERK relative protein ratios, and an increase in both PTEN and p53 mRNA levels and Bit-1 relative protein levels. These results suggest a prospective mechanism of action for AsNPs that involves a potential interaction with extracellular matrix (ECM) components that reduces cell attachment and subsequently triggers anoikis, an anchorage-dependent type of apoptosis. Full article

(1) Background: Pseudomonas aeruginosa is a Gram-negative bacterium with several intrinsic and acquired antimicrobial resistance mechanisms. The spread of carbapenemase-encoding genes, an acquired mechanism, enables carbapenem resistance in clinical settings. Detection of the carbapenemase-producer strains is urgent. Therefore, we aimed to characterize carbapenemase production in the clinical strains of P. aeruginosa at a tertiary-care center. (2) Methods: We included clinical strains of P. aeruginosa (from August 2011 to December 2018) with resistance towards at least one carbapenem. Strains were isolated in a tertiary-care center in Mexico City. Antimicrobial susceptibility profiles were determined by broth microdilution. Screening for carbapenemase-encoding genes was performed in all strains. Phenotypic assays (CarbaNP and mCIM) were conducted. Additional modifications to mCIM were also tested. (3) Results: One-hundred seventy-one P. aeruginosa strains out of 192 included in this study were resistant towards at least one of the carbapenems tested. Forty-seven of these strains harbored a carbapenemase-encoding gene. VIM (59.6%) and GES (23.4%) were the most frequently found carbapenemases in our study, followed by IMP (14.9%). (4) Among the most frequent carbapenemase genes identified, metallo-ß-lactamases were the most prevalent, which impair new treatment options. Searching for carbapenemase genes should be performed in resistant isolates to stop transmission and guide antimicrobial treatment. Full article

The main source of systematic uncertainty on neutrino cross-section measurements at the GeV scale originates from the poor knowledge of the initial flux. The goal of reducing this uncertainty to 1% can be achieved through the monitoring of charged leptons produced in association with neutrinos, by properly instrumenting the decay region of a conventional narrow-band neutrino beam. Large-angle muons and positrons from kaons are measured by a sampling calorimeter on the decay tunnel walls, while muon stations after the hadron dump can be used to monitor the neutrino component from pion decays. Furthermore, the narrow momentum width (<10%) of the beam provides a O (10%) measurement of the neutrino energy on an event-by-event basis, thanks to its correlation with the radial position of the interaction at the neutrino detector. The ENUBET project has been funded by the ERC in 2016 to prove the feasibility of such a monitored neutrino beam and, since 2019, ENUBET is also a CERN neutrino platform experiment (NP06/ENUBET). The breakthrough the project achieved is the design of a horn-less neutrino beamline that would allow for a 1% measurement of ${\nu }_e$ and ${\nu }_{\mu }$ cross-sections in about 3 years of data taking at CERN-SPS, using ProtoDUNE as far detector. Full article

Amorphous-Ge (α-Ge) or free-standing nanoparticles (NPs) synthesized via hydrogen-free plasma-enhanced chemical vapor deposition (PECVD) were applied as transmissive or reflective saturable absorbers, respectively, for starting up passively mode-locked erbium-doped fiber lasers (EDFLs). Under a threshold pumping power of 41 mW for mode-locking the EDFL, the transmissive α-Ge film could serve as a saturable absorber with a modulation depth of 52–58%, self-starting EDFL pulsation with a pulsewidth of approximately 700 fs. Under a high power of 155 mW, the pulsewidth of the EDFL mode-locked by the 15 s-grown α-Ge was suppressed to 290 fs, with a corresponding spectral linewidth of 8.95 nm due to the soliton compression induced by intra-cavity self-phase modulation. The Ge-NP-on-Au (Ge-NP/Au) films could also serve as a reflective-type saturable absorber to passively mode-lock the EDFL with a broadened pulsewidth of 3.7–3.9 ps under a high-gain operation with 250 mW pumping power. The reflection-type Ge-NP/Au film was an imperfect mode-locker, owing to their strong surface-scattered deflection in the near-infrared wavelength region. From the abovementioned results, both ultra-thin α-Ge film and free-standing Ge NP exhibit potential as transmissive and reflective saturable absorbers, respectively, for ultrafast fiber lasers. Full article

This work aimed to synthesize and characterize a nanocarrier that consisted of a ternary system, namely β-cyclodextrin-based nanosponge (NS) inclusion compounds (ICs) associated with silver nanoparticles (AgNPs) to increase the antimicrobial activity of quercetin (QRC). The nanosystem was developed to overcome the therapeutical limitations of QRC. The host–guest interaction between NSs and QRC was confirmed by field emission scanning electron microscopy (FE–SEM), X-ray powder diffraction (XRPD), thermogravimetric analysis (TGA), and proton nuclear magnetic resonance (¹H–NMR). Moreover, the association of AgNPs with the NS–QRC was characterized using FE–SEM, energy-dispersive spectroscopy (EDS), transmission electron microscopy (TEM), dynamic light scattering (DLS), ζ-potential, and UV–Vis. Finally, the antimicrobial activity of the novel formulations was tested, which depicted that the complexation of QRC inside the supramolecular interstices of NSs increases the inhibitory effects against Escherichia coli ATCC25922, as compared to that observed in the free QRC. In addition, at the same concentrations used to generate an antibacterial effect, the NS–QRC system with AgNPs does not affect the metabolic activity of GES–1 cells. Therefore, these results suggest that the use of NSs associated with AgNPs resulted in an efficient strategy to improve the physicochemical features of QRC. Full article

Alzheimer’s disease (AD) is a neurodegenerative disorder that jeopardizes the lives of diagnosed patients at late stages. This study aimed to assess, for the first time, the efficiency of germanium dioxide nanoparticles (GeO₂NPs) in mitigating AD at the in vivo level compared to cerium dioxide nanoparticles (CeO₂NPs). Nanoparticles were synthesized using the co-precipitation method. Their antioxidant activity was tested. For the bio-assessment, rats were randomly assigned into four groups: AD + GeO₂NPs, AD + CeO₂NPs, AD, and control. Serum and brain tau protein, phosphorylated tau, neurogranin, amyloid β peptide 1-42, acetylcholinesterase, and monoamine oxidase levels were measured. Brain histopathological evaluation was conducted. Furthermore, nine AD-related microRNAs were quantified. Nanoparticles were spherical with diameters ranging from 12–27 nm. GeO₂NPs exhibited a stronger antioxidant activity than CeO₂NPs. Serum and tissue analyses revealed the regression of AD biomarkers to almost control values upon treatment using GeO₂NPs. Histopathological observations strongly supported the biochemical outcomes. Then, miR-29a-3p was down-regulated in the GeO₂NPs-treated group. This pre-clinical study substantiated the scientific evidence favoring the pharmacological application of GeO₂NPs and CeO₂NPs in AD treatment. Our study is the first report on the efficiency of GeO₂NPs in managing AD. Further studies are needed to fully understand their mechanism of action. Full article

The purpose of this study is to obtain a bio-based coating with good functional activity and self-healing ability, demonstrating its potential in food, materials, and other application fields. Plastic coatings can cause serious environmental pollution. It was a good solution to replace plastic coatings with degradable coatings. However, the development of degradable coatings in the fields of food and materials was limited due to their insufficient antibacterial ability and weak comprehensive properties. Therefore, chitosan nanoparticles (NPs) loaded with gallic acid (GA) were self-assembled with gelatin (GE) to prepare high-performance, degradable, self-healing bio-based nanocomposite coatings with antibacterial and antioxidant properties. The oxygen permeability of GE nanocomposite coatings decreased gradually with the addition of NPs, and the barrier properties increased significantly. At the same time, due to the excellent antioxidant and antibacterial ability of GA, the antioxidant effect of the nanocomposite coatings increased by 119%, and the antibacterial rate against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) increased by 32% and 58%, respectively, compared with the pure GE coatings. In addition, the nanocomposite coatings can be repaired within 24 h after being scratched at room temperature. Finally, GA coated with chitosan nanoparticles can significantly delay the escape of GA, and the retardation of gallic acid release exceeded 89% in simulated solutions after 24 h immersion, extending the service life of the nanocomposite coatings. Full article

Nd³⁺-doped GeO₂-PbO glass with silver (Ag) nanoparticles (NPs) are produced with double line waveguides through fs laser processing for photonic applications. A Ti:sapphire fs laser at 800 nm was used to write the waveguides directly into the glass 0.7 mm beneath the surface. This platform is based on pairs of parallel lines with spacing of 10 µm, each pair being formed by two identical written lines but in two different configurations of 4 or 8 separately processed lines, which are coincident. The results of optical microscopy, absorbance measurements, refractive index change, beam quality factor (at 632 and 1064 nm), photoluminescence, propagation losses, and relative gain at 1064 nm are presented. The structural changes in the glass due to the presence of Ag NPs were investigated by Raman spectroscopy. At 632 and 1064 nm, x,y-symmetrical guiding was observed, and for both kinds of overlapping pulses, a refractive index alteration of 10⁻³ was found in both directions. Photoluminescence growth of ~47% at 1064 nm was observed due to the plasmonic effect of Ag NPs. In dual waveguides containing Ag NPs, the relative gain obtained increased by 40% and 30% for four and eight overlapping lines, respectively, at 600 mW of 808 nm pump power, when compared to waveguides without those metallic NPs. We highlight the resultant positive internal gains of 5.11 and 7.12 dB/cm that showed a growth of ~40% and ~30%, respectively, with respect to the samples without Ag NPs. The increase in photoluminescence and relative gain were related to the local field growth produced by Ag NPs. The present results show that the addition of Ag NPs impacts positively on the optical performance at 1064 nm of double line waveguides processed by fs laser writing in Nd³⁺-doped GeO₂-PbO glass, opening news perspectives for photonics. Full article

Nowadays, biopolymer-based films are being developed as an alternative to conventional plastic-based films, mainly because they are non-toxic, flexible, inexpensive, and widely available. However, they are restricted in their applications due to several deficiencies in their properties. Accordingly, the reinforcement of these materials with nanoparticles/nanofillers could overcome some of their shortcomings, especially those processed by green methods. Green synthesized zinc oxide nanoparticles (ZnO-NPs) are highly suggested to overcome these deficiencies. Therefore, the main aim of this work was to develop different biopolymer-based films from cellulose acetate (CA), chitosan (CH), and gelatin (GE) reinforced with ZnO-NPs prepared by casting, and to assess their different properties. The results show the improvements produced by the incorporation of ZnO-NPs (1% w/w) into the CA, CH, and GE systems. Thus, the water contact angles (WCAs) increased by about 12, 13, and 14%, while the water vapor permeability (WVP) decreased by about 14, 6, and 29%, the water solubility (WS) decreased by about 23, 6, and 5%, and the transparency (T) increased by about 19, 31, and 20% in the CA, CH, and GE systems, respectively. Furthermore, the mechanical properties were enhanced by increasing the ultimate tensile strength (UTS) (by about 39, 13, and 26%, respectively) and Young’s modulus (E) (by about 70, 34, and 63%, respectively), thereby decreasing the elongation at the break (ε_max) (by about 56, 23, and 49%, respectively) and the toughness (by about 50, 4, and 30%, respectively). Lastly, the antioxidant properties were enhanced by 34, 49, and 39%, respectively. Full article